I previously could enter text mode, but this time my display turned off after initialization; I retrieved dmesg and Xorg.0.log using another installation.
dmesg:
Code: Select all
[ 0.000000] Linux version 6.5.5-porteus ([email protected]) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT_DYNAMIC Sat Sep 23 18:21:43 MSK 2023
[ 0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz from=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0 changes=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0/porteus timezone=America/Denver utc login=root initrd=/boot/syslinux/initrd.xz
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000005e000-0x000000000005efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003dd56fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003dd57000-0x000000003dd57fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003dd58000-0x000000003e792fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003e793000-0x000000003e793fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e794000-0x0000000063c6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000063c6d000-0x0000000066d6cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000066d6d000-0x0000000066e57fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000066e58000-0x00000000672a0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000672a1000-0x0000000067efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067eff000-0x0000000067efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067f00000-0x000000006dffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006e800000-0x000000006e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006f000000-0x00000000743fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000028bbfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.8 by American Megatrends
[ 0.000000] efi: ACPI=0x66e57000 ACPI 2.0=0x66e57014 TPMFinalLog=0x6724e000 SMBIOS=0x67bda000 SMBIOS 3.0=0x67bd9000 MEMATTR=0x5eb4c018 ESRT=0x60e59c18 TPMEventLog=0x5ccb3018
[ 0.000000] efi: Remove mem84: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
[ 0.000000] efi: Not removing mem85: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem86: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem87: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem89: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem90: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.5.0 present.
[ 0.000000] DMI: Momentplus N100/N100, BIOS DNB20 V0.06 06/01/2023
[ 0.000000] tsc: Detected 800.000 MHz processor
[ 0.000000] tsc: Detected 806.400 MHz TSC
[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000017] last_pfn = 0x28bc00 max_arch_pfn = 0x400000000
[ 0.000020] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000104] last_pfn = 0x67f00 max_arch_pfn = 0x400000000
[ 0.002986] found SMP MP-table at [mem 0x000fcde0-0x000fcdef]
[ 0.002991] esrt: Reserving ESRT space from 0x0000000060e59c18 to 0x0000000060e59c50.
[ 0.002995] e820: update [mem 0x60e59000-0x60e59fff] usable ==> reserved
[ 0.003011] Using GB pages for direct mapping
[ 0.003012] Incomplete global flushes, disabling PCID
[ 0.003665] Secure boot disabled
[ 0.003666] RAMDISK: [mem 0x62ca1000-0x62d81fff]
[ 0.003668] ACPI: Early table checksum verification disabled
[ 0.003670] ACPI: RSDP 0x0000000066E57014 000024 (v02 ALASKA)
[ 0.003672] ACPI: XSDT 0x0000000066E56728 000114 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003677] ACPI: FACP 0x0000000066E4E000 000114 (v06 ALASKA A M I 01072009 AMI 01000013)
[ 0.003681] ACPI: DSDT 0x0000000066DD9000 0748C1 (v02 ALASKA A M I 01072009 INTL 20200717)
[ 0.003683] ACPI: FACS 0x00000000672A0000 000040
[ 0.003684] ACPI: SSDT 0x0000000066E4F000 0067BE (v02 DptfTb DptfTabl 00001000 INTL 20200717)
[ 0.003687] ACPI: FIDT 0x0000000066DD8000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003689] ACPI: MSDM 0x0000000066DD7000 000055 (v03 ALASKA A M I 01072009 AMI 01000013)
[ 0.003691] ACPI: SSDT 0x0000000066DD6000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717)
[ 0.003693] ACPI: SSDT 0x0000000066DD0000 005D10 (v02 CpuRef CpuSsdt 00003000 INTL 20200717)
[ 0.003694] ACPI: SSDT 0x0000000066DCD000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717)
[ 0.003696] ACPI: SSDT 0x0000000066DC9000 0033D3 (v02 INTEL IgfxSsdt 00003000 INTL 20200717)
[ 0.003698] ACPI: SSDT 0x0000000066DBB000 00D487 (v02 INTEL TcssSsdt 00001000 INTL 20200717)
[ 0.003700] ACPI: HPET 0x0000000066DBA000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003702] ACPI: APIC 0x0000000066DB9000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013)
[ 0.003704] ACPI: MCFG 0x0000000066DB8000 00003C (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003705] ACPI: SSDT 0x0000000066DB6000 001B43 (v02 ALASKA Ther_Rvp 00001000 INTL 20200717)
[ 0.003707] ACPI: UEFI 0x0000000067235000 000048 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003709] ACPI: NHLT 0x0000000066DB5000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.003711] ACPI: LPIT 0x0000000066DB4000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003713] ACPI: SSDT 0x0000000066DB0000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717)
[ 0.003714] ACPI: SSDT 0x0000000066DAD000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717)
[ 0.003716] ACPI: DBGP 0x0000000066DAC000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003718] ACPI: DBG2 0x0000000066DAB000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
[ 0.003720] ACPI: DMAR 0x0000000066DAA000 000088 (v02 INTEL EDK2 00000002 01000013)
[ 0.003722] ACPI: FPDT 0x0000000066DA9000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003723] ACPI: SSDT 0x0000000066DA8000 0006CA (v02 INTEL xh_adl_N 00000000 INTL 20200717)
[ 0.003726] ACPI: SSDT 0x0000000066DA4000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717)
[ 0.003727] ACPI: SSDT 0x0000000066DA0000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717)
[ 0.003729] ACPI: SSDT 0x0000000066D9F000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717)
[ 0.003731] ACPI: TPM2 0x0000000066D9D000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003733] ACPI: BGRT 0x0000000066D9E000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003735] ACPI: PHAT 0x0000000066D9C000 0004EA (v01 ALASKA A M I 00000005 MSFT 0100000D)
[ 0.003737] ACPI: WSMT 0x0000000066DB3000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003738] ACPI: Reserving FACP table memory at [mem 0x66e4e000-0x66e4e113]
[ 0.003740] ACPI: Reserving DSDT table memory at [mem 0x66dd9000-0x66e4d8c0]
[ 0.003741] ACPI: Reserving FACS table memory at [mem 0x672a0000-0x672a003f]
[ 0.003741] ACPI: Reserving SSDT table memory at [mem 0x66e4f000-0x66e557bd]
[ 0.003742] ACPI: Reserving FIDT table memory at [mem 0x66dd8000-0x66dd809b]
[ 0.003743] ACPI: Reserving MSDM table memory at [mem 0x66dd7000-0x66dd7054]
[ 0.003744] ACPI: Reserving SSDT table memory at [mem 0x66dd6000-0x66dd638b]
[ 0.003744] ACPI: Reserving SSDT table memory at [mem 0x66dd0000-0x66dd5d0f]
[ 0.003745] ACPI: Reserving SSDT table memory at [mem 0x66dcd000-0x66dcf934]
[ 0.003746] ACPI: Reserving SSDT table memory at [mem 0x66dc9000-0x66dcc3d2]
[ 0.003746] ACPI: Reserving SSDT table memory at [mem 0x66dbb000-0x66dc8486]
[ 0.003747] ACPI: Reserving HPET table memory at [mem 0x66dba000-0x66dba037]
[ 0.003748] ACPI: Reserving APIC table memory at [mem 0x66db9000-0x66db91db]
[ 0.003748] ACPI: Reserving MCFG table memory at [mem 0x66db8000-0x66db803b]
[ 0.003749] ACPI: Reserving SSDT table memory at [mem 0x66db6000-0x66db7b42]
[ 0.003750] ACPI: Reserving UEFI table memory at [mem 0x67235000-0x67235047]
[ 0.003750] ACPI: Reserving NHLT table memory at [mem 0x66db5000-0x66db502c]
[ 0.003751] ACPI: Reserving LPIT table memory at [mem 0x66db4000-0x66db40cb]
[ 0.003752] ACPI: Reserving SSDT table memory at [mem 0x66db0000-0x66db2a82]
[ 0.003752] ACPI: Reserving SSDT table memory at [mem 0x66dad000-0x66daf356]
[ 0.003753] ACPI: Reserving DBGP table memory at [mem 0x66dac000-0x66dac033]
[ 0.003754] ACPI: Reserving DBG2 table memory at [mem 0x66dab000-0x66dab053]
[ 0.003754] ACPI: Reserving DMAR table memory at [mem 0x66daa000-0x66daa087]
[ 0.003755] ACPI: Reserving FPDT table memory at [mem 0x66da9000-0x66da9043]
[ 0.003756] ACPI: Reserving SSDT table memory at [mem 0x66da8000-0x66da86c9]
[ 0.003756] ACPI: Reserving SSDT table memory at [mem 0x66da4000-0x66da7ae9]
[ 0.003757] ACPI: Reserving SSDT table memory at [mem 0x66da0000-0x66da39d9]
[ 0.003758] ACPI: Reserving SSDT table memory at [mem 0x66d9f000-0x66d9f143]
[ 0.003758] ACPI: Reserving TPM2 table memory at [mem 0x66d9d000-0x66d9d04b]
[ 0.003759] ACPI: Reserving BGRT table memory at [mem 0x66d9e000-0x66d9e037]
[ 0.003760] ACPI: Reserving PHAT table memory at [mem 0x66d9c000-0x66d9c4e9]
[ 0.003760] ACPI: Reserving WSMT table memory at [mem 0x66db3000-0x66db3027]
[ 0.003792] No NUMA configuration found
[ 0.003793] Faking a node at [mem 0x0000000000000000-0x000000028bbfffff]
[ 0.003796] NODE_DATA(0) allocated [mem 0x28bbf8000-0x28bbfcfff]
[ 0.003809] Zone ranges:
[ 0.003810] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003811] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003813] Normal [mem 0x0000000100000000-0x000000028bbfffff]
[ 0.003814] Movable zone start for each node
[ 0.003814] Early memory node ranges
[ 0.003815] node 0: [mem 0x0000000000001000-0x000000000005dfff]
[ 0.003816] node 0: [mem 0x000000000005f000-0x000000000009ffff]
[ 0.003817] node 0: [mem 0x0000000000100000-0x000000003dd56fff]
[ 0.003818] node 0: [mem 0x000000003dd58000-0x000000003e792fff]
[ 0.003818] node 0: [mem 0x000000003e794000-0x0000000063c6cfff]
[ 0.003819] node 0: [mem 0x0000000067eff000-0x0000000067efffff]
[ 0.003820] node 0: [mem 0x0000000100000000-0x000000028bbfffff]
[ 0.003821] Initmem setup node 0 [mem 0x0000000000001000-0x000000028bbfffff]
[ 0.003824] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003825] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003848] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.005517] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.006574] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.006698] On node 0, zone DMA32: 17042 pages in unavailable ranges
[ 0.017962] On node 0, zone Normal: 256 pages in unavailable ranges
[ 0.018095] On node 0, zone Normal: 17408 pages in unavailable ranges
[ 0.018119] Reserving Intel graphics memory at [mem 0x70800000-0x743fffff]
[ 0.018928] ACPI: PM-Timer IO Port: 0x1808
[ 0.018933] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.018935] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.018935] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.018936] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.018937] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.018937] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.018938] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.018938] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.018939] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.018939] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.018940] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.018941] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.018941] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.018942] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.018942] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.018943] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.018944] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.018944] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.018945] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.018945] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.018946] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.018947] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.018947] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.018948] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.018973] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.018975] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018977] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.018981] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.018982] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.018985] TSC deadline timer available
[ 0.018986] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.018991] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018992] PM: hibernation: Registered nosave memory: [mem 0x0005e000-0x0005efff]
[ 0.018993] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.018994] PM: hibernation: Registered nosave memory: [mem 0x3dd57000-0x3dd57fff]
[ 0.018995] PM: hibernation: Registered nosave memory: [mem 0x3e793000-0x3e793fff]
[ 0.018996] PM: hibernation: Registered nosave memory: [mem 0x60e59000-0x60e59fff]
[ 0.018997] PM: hibernation: Registered nosave memory: [mem 0x63c6d000-0x66d6cfff]
[ 0.018997] PM: hibernation: Registered nosave memory: [mem 0x66d6d000-0x66e57fff]
[ 0.018998] PM: hibernation: Registered nosave memory: [mem 0x66e58000-0x672a0fff]
[ 0.018999] PM: hibernation: Registered nosave memory: [mem 0x672a1000-0x67efefff]
[ 0.019000] PM: hibernation: Registered nosave memory: [mem 0x67f00000-0x6dffffff]
[ 0.019000] PM: hibernation: Registered nosave memory: [mem 0x6e000000-0x6e7fffff]
[ 0.019001] PM: hibernation: Registered nosave memory: [mem 0x6e800000-0x6e9fffff]
[ 0.019001] PM: hibernation: Registered nosave memory: [mem 0x6ea00000-0x6effffff]
[ 0.019002] PM: hibernation: Registered nosave memory: [mem 0x6f000000-0x743fffff]
[ 0.019003] PM: hibernation: Registered nosave memory: [mem 0x74400000-0xfdffffff]
[ 0.019003] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.019004] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.019005] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.019005] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.019006] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.019006] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[ 0.019007] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.019008] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[ 0.019008] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.019009] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.019010] [mem 0x74400000-0xfdffffff] available for PCI devices
[ 0.019014] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.025406] setup_percpu: NR_CPUS:32 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.025696] percpu: Embedded 46 pages/cpu s148072 r8192 d32152 u524288
[ 0.025701] pcpu-alloc: s148072 r8192 d32152 u524288 alloc=1*2097152
[ 0.025703] pcpu-alloc: [0] 0 1 2 3
[ 0.025714] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz from=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0 changes=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0/porteus timezone=America/Denver utc login=root initrd=/boot/syslinux/initrd.xz
[ 0.025790] Unknown kernel command line parameters "utc BOOT_IMAGE=/boot/syslinux/vmlinuz from=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0 changes=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0/porteus timezone=America/Denver login=root", will be passed to user space.
[ 0.025812] random: crng init done
[ 0.026640] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.027090] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.027117] Fallback order for Node 0: 0
[ 0.027120] Built 1 zonelists, mobility grouping on. Total pages: 1997706
[ 0.027121] Policy zone: Normal
[ 0.027123] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.027131] software IO TLB: area num 4.
[ 0.058802] Memory: 7779896K/8118312K available (12288K kernel code, 1193K rwdata, 2532K rodata, 2072K init, 1988K bss, 338160K reserved, 0K cma-reserved)
[ 0.058830] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.059046] Dynamic Preempt: voluntary
[ 0.059066] rcu: Preemptible hierarchical RCU implementation.
[ 0.059067] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.059068] Trampoline variant of Tasks RCU enabled.
[ 0.059069] Tracing variant of Tasks RCU enabled.
[ 0.059069] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.059070] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.059091] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.059313] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.059445] Console: colour dummy device 80x25
[ 0.059448] printk: console [tty0] enabled
[ 0.059484] ACPI: Core revision 20230331
[ 0.059969] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.059970] APIC: Switch to symmetric I/O mode setup
[ 0.059973] DMAR: Host address width 39
[ 0.059974] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.059979] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ 0.059982] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.059986] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[ 0.059989] DMAR: RMRR base: 0x00000070000000 end: 0x000000743fffff
[ 0.059992] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.059994] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.061140] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.063850] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
[ 0.063860] Calibrating delay loop (skipped), value calculated using timer frequency.. 1612.80 BogoMIPS (lpj=806400)
[ 0.063889] CPU0: Thermal monitoring enabled (TM1)
[ 0.063963] process: using mwait in idle threads
[ 0.063966] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.063967] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.063970] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.063972] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.063973] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.063975] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.063977] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.063983] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.063984] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.063985] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.063986] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.063987] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.063989] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.063990] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[ 0.064855] Freeing SMP alternatives memory: 24K
[ 0.064855] pid_max: default: 32768 minimum: 301
[ 0.064855] LSM: initializing lsm=capability
[ 0.064855] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.064855] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.064855] smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0)
[ 0.064855] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064855] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064855] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Gracemont events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.064855] ... version: 5
[ 0.064855] ... bit width: 48
[ 0.064855] ... generic registers: 6
[ 0.064855] ... value mask: 0000ffffffffffff
[ 0.064855] ... max period: 00007fffffffffff
[ 0.064855] ... fixed-purpose events: 3
[ 0.064855] ... event mask: 000000070000003f
[ 0.064855] signal: max sigframe size: 3632
[ 0.064855] Estimated ratio of average max frequency by base frequency (times 1024): 3712
[ 0.064855] rcu: Hierarchical SRCU implementation.
[ 0.064855] rcu: Max phase no-delay instances is 400.
[ 0.064855] smp: Bringing up secondary CPUs ...
[ 0.064855] smpboot: x86: Booting SMP configuration:
[ 0.064855] .... node #0, CPUs: #1 #2 #3
[ 0.065875] smp: Brought up 1 node, 4 CPUs
[ 0.065875] smpboot: Max logical packages: 1
[ 0.065875] smpboot: Total of 4 processors activated (6451.20 BogoMIPS)
[ 0.066324] devtmpfs: initialized
[ 0.066324] x86/mm: Memory block size: 128MB
[ 0.067350] ACPI: PM: Registering ACPI NVS region [mem 0x66e58000-0x672a0fff] (4493312 bytes)
[ 0.067430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.067433] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.067450] pinctrl core: initialized pinctrl subsystem
[ 0.067825] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.068018] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.068019] thermal_sys: Registered thermal governor 'step_wise'
[ 0.068020] thermal_sys: Registered thermal governor 'user_space'
[ 0.068032] cpuidle: using governor ladder
[ 0.068035] cpuidle: using governor menu
[ 0.068080] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.068080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.068080] PCI: not using MMCONFIG
[ 0.068080] PCI: Using configuration type 1 for base access
[ 0.068080] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.068080] raid6: skipped pq benchmark and selected avx2x4
[ 0.068080] raid6: using avx2x2 recovery algorithm
[ 0.068080] ACPI: Added _OSI(Module Device)
[ 0.068080] ACPI: Added _OSI(Processor Device)
[ 0.068080] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.068080] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136156] ACPI: 14 ACPI AML tables successfully acquired and loaded
[ 0.146222] ACPI: Dynamic OEM Table Load:
[ 0.146233] ACPI: SSDT 0xFFFF8881000FB800 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717)
[ 0.146928] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.150074] ACPI: Dynamic OEM Table Load:
[ 0.150081] ACPI: SSDT 0xFFFF88810098F800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717)
[ 0.150892] ACPI: Dynamic OEM Table Load:
[ 0.150897] ACPI: SSDT 0xFFFF8881000FBA00 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717)
[ 0.151724] ACPI: Dynamic OEM Table Load:
[ 0.151730] ACPI: SSDT 0xFFFF888100E5B000 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717)
[ 0.152768] ACPI: Dynamic OEM Table Load:
[ 0.152778] ACPI: SSDT 0xFFFF888100E82000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717)
[ 0.154092] ACPI: Dynamic OEM Table Load:
[ 0.154100] ACPI: SSDT 0xFFFF888100E84000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717)
[ 0.155234] ACPI: Dynamic OEM Table Load:
[ 0.155241] ACPI: SSDT 0xFFFF888100E86000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717)
[ 0.156401] ACPI: Dynamic OEM Table Load:
[ 0.156408] ACPI: SSDT 0xFFFF888100073000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717)
[ 0.158304] ACPI: EC: EC started
[ 0.158306] ACPI: EC: interrupt blocked
[ 0.163102] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.163104] ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC used to handle transactions
[ 0.163106] ACPI: Interpreter enabled
[ 0.163147] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.163148] ACPI: Using IOAPIC for interrupt routing
[ 0.163185] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.164535] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource
[ 0.164544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.164545] PCI: Ignoring E820 reservations for host bridge windows
[ 0.165698] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.179588] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource
[ 0.185706] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[ 0.188333] ACPI: \_SB_.PC00.TBT0: New power resource
[ 0.188585] ACPI: \_SB_.PC00.TBT1: New power resource
[ 0.192808] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)
[ 0.192817] ACPI Error: Aborting method \_SB.PC00.TXHC.RHUB.SS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 0.192844] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)
[ 0.192849] ACPI Error: Aborting method \_SB.PC00.TXHC.RHUB.SS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 0.220821] ACPI: \_TZ_.FN00: New power resource
[ 0.221279] ACPI: \PIN_: New power resource
[ 0.221559] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ 0.221565] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.222886] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
[ 0.226250] PCI host bridge to bus 0000:00
[ 0.226252] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.226255] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.226256] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.226257] pci_bus 0000:00: root bus resource [mem 0x74400000-0xbfffffff window]
[ 0.226259] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.226261] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.226306] pci 0000:00:00.0: [8086:461c] type 00 class 0x060000
[ 0.226467] pci 0000:00:02.0: [8086:46d1] type 00 class 0x030000
[ 0.226476] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[ 0.226482] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.226486] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.226501] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.226502] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.226505] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.226531] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[ 0.226532] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[ 0.226537] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[ 0.226539] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[ 0.226674] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000
[ 0.226687] pci 0000:00:04.0: reg 0x10: [mem 0x6001100000-0x600111ffff 64bit]
[ 0.226940] pci 0000:00:0d.0: [8086:464e] type 00 class 0x0c0330
[ 0.226950] pci 0000:00:0d.0: reg 0x10: [mem 0x6001130000-0x600113ffff 64bit]
[ 0.226992] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[ 0.228308] pci 0000:00:14.0: [8086:54ed] type 00 class 0x0c0330
[ 0.228332] pci 0000:00:14.0: reg 0x10: [mem 0x6001120000-0x600112ffff 64bit]
[ 0.228430] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.229749] pci 0000:00:14.2: [8086:54ef] type 00 class 0x050000
[ 0.229772] pci 0000:00:14.2: reg 0x10: [mem 0x6001148000-0x600114bfff 64bit]
[ 0.229788] pci 0000:00:14.2: reg 0x18: [mem 0x6001152000-0x6001152fff 64bit]
[ 0.230014] pci 0000:00:14.3: [8086:54f0] type 00 class 0x028000
[ 0.230076] pci 0000:00:14.3: reg 0x10: [mem 0x6001144000-0x6001147fff 64bit]
[ 0.230262] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.231001] pci 0000:00:15.0: [8086:54e8] type 00 class 0x0c8000
[ 0.231731] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.234866] pci 0000:00:16.0: [8086:54e0] type 00 class 0x078000
[ 0.234892] pci 0000:00:16.0: reg 0x10: [mem 0x6001150000-0x6001150fff 64bit]
[ 0.234988] pci 0000:00:16.0: PME# supported from D3hot
[ 0.235366] pci 0000:00:17.0: [8086:54d3] type 00 class 0x010601
[ 0.235385] pci 0000:00:17.0: reg 0x10: [mem 0x74700000-0x74701fff]
[ 0.235397] pci 0000:00:17.0: reg 0x14: [mem 0x74703000-0x747030ff]
[ 0.235406] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.235416] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.235425] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.235434] pci 0000:00:17.0: reg 0x24: [mem 0x74702000-0x747027ff]
[ 0.235500] pci 0000:00:17.0: PME# supported from D3hot
[ 0.236206] pci 0000:00:19.0: [8086:54c5] type 00 class 0x0c8000
[ 0.236905] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.240413] pci 0000:00:19.1: [8086:54c6] type 00 class 0x0c8000
[ 0.241108] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.244251] pci 0000:00:1a.0: [8086:54c4] type 00 class 0x080501
[ 0.244278] pci 0000:00:1a.0: reg 0x10: [mem 0x600114d000-0x600114dfff 64bit]
[ 0.244989] pci 0000:00:1d.0: [8086:54b0] type 01 class 0x060400
[ 0.245101] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.245141] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.245580] pci 0000:00:1d.3: [8086:54b3] type 01 class 0x060400
[ 0.245691] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 0.245731] pci 0000:00:1d.3: PTM enabled (root), 4ns granularity
[ 0.246151] pci 0000:00:1f.0: [8086:5481] type 00 class 0x060100
[ 0.246486] pci 0000:00:1f.3: [8086:54c8] type 00 class 0x040100
[ 0.246548] pci 0000:00:1f.3: reg 0x10: [mem 0x6001140000-0x6001143fff 64bit]
[ 0.246624] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[ 0.246788] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.246926] pci 0000:00:1f.4: [8086:54a3] type 00 class 0x0c0500
[ 0.246955] pci 0000:00:1f.4: reg 0x10: [mem 0x600114c000-0x600114c0ff 64bit]
[ 0.246980] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.247201] pci 0000:00:1f.5: [8086:54a4] type 00 class 0x0c8000
[ 0.247222] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.247510] pci 0000:01:00.0: [8086:15f3] type 00 class 0x020000
[ 0.247532] pci 0000:01:00.0: reg 0x10: [mem 0x74400000-0x744fffff]
[ 0.247567] pci 0000:01:00.0: reg 0x1c: [mem 0x74500000-0x74503fff]
[ 0.247701] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.247895] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.247900] pci 0000:00:1d.0: bridge window [mem 0x74400000-0x745fffff]
[ 0.248162] pci 0000:02:00.0: [1f03:1202] type 00 class 0x010802
[ 0.248184] pci 0000:02:00.0: reg 0x10: [mem 0x74600000-0x74603fff 64bit]
[ 0.248319] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.248391] pci 0000:02:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1d.3 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.248534] pci 0000:00:1d.3: PCI bridge to [bus 02]
[ 0.248539] pci 0000:00:1d.3: bridge window [mem 0x74600000-0x746fffff]
[ 0.253504] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.253583] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.253660] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.253736] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.253812] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.253891] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.253967] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.254043] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.267000] ACPI: EC: interrupt unblocked
[ 0.267001] ACPI: EC: event unblocked
[ 0.267015] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.267016] ACPI: EC: GPE=0x6e
[ 0.267017] ACPI: \_SB_.PC00.LPCB.H_EC: Boot DSDT EC initialization complete
[ 0.267019] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
[ 0.267062] iommu: Default domain type: Translated
[ 0.267063] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.267069] SCSI subsystem initialized
[ 0.267069] libata version 3.00 loaded.
[ 0.267069] ACPI: bus type USB registered
[ 0.267069] usbcore: registered new interface driver usbfs
[ 0.267069] usbcore: registered new interface driver hub
[ 0.267069] usbcore: registered new device driver usb
[ 0.267069] mc: Linux media interface: v0.10
[ 0.267069] videodev: Linux video capture interface: v2.00
[ 0.267069] pps_core: LinuxPPS API ver. 1 registered
[ 0.267069] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.267069] PTP clock support registered
[ 0.267069] efivars: Registered efivars operations
[ 0.267069] Advanced Linux Sound Architecture Driver Initialized.
[ 0.267069] PCI: Using ACPI for IRQ routing
[ 0.277088] PCI: pci_cache_line_size set to 64 bytes
[ 0.277620] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.277846] e820: reserve RAM buffer [mem 0x0005e000-0x0005ffff]
[ 0.277848] e820: reserve RAM buffer [mem 0x3dd57000-0x3fffffff]
[ 0.277849] e820: reserve RAM buffer [mem 0x3e793000-0x3fffffff]
[ 0.277850] e820: reserve RAM buffer [mem 0x60e59000-0x63ffffff]
[ 0.277851] e820: reserve RAM buffer [mem 0x63c6d000-0x63ffffff]
[ 0.277852] e820: reserve RAM buffer [mem 0x67f00000-0x67ffffff]
[ 0.277853] e820: reserve RAM buffer [mem 0x28bc00000-0x28bffffff]
[ 0.277872] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.277872] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.277872] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.277872] vgaarb: loaded
[ 0.277937] clocksource: Switched to clocksource tsc-early
[ 0.277986] pnp: PnP ACPI init
[ 0.278591] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.278594] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.278692] system 00:01: [io 0x1854-0x1857] has been reserved
[ 0.280427] pnp 00:02: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 0.280454] system 00:02: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.280456] system 00:02: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.280458] system 00:02: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.280459] system 00:02: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.280461] system 00:02: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.280462] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.280464] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.282801] system 00:04: [io 0x2000-0x20fe] has been reserved
[ 0.283408] pnp: PnP ACPI: found 6 devices
[ 0.288798] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.288840] NET: Registered PF_INET protocol family
[ 0.288986] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.290571] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.290580] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.290589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.290647] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.290860] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.290928] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.290946] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.290960] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.290992] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.290997] NET: Registered PF_XDP protocol family
[ 0.291001] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[ 0.291012] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ 0.291017] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ 0.291020] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ 0.291079] pci 0000:00:19.0: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[ 0.291139] pci 0000:00:19.1: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[ 0.291197] pci 0000:00:1f.5: BAR 0: assigned [mem 0x74704000-0x74704fff]
[ 0.291209] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.291213] pci 0000:00:1d.0: bridge window [mem 0x74400000-0x745fffff]
[ 0.291221] pci 0000:00:1d.3: PCI bridge to [bus 02]
[ 0.291224] pci 0000:00:1d.3: bridge window [mem 0x74600000-0x746fffff]
[ 0.291231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.291233] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.291234] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.291236] pci_bus 0000:00: resource 7 [mem 0x74400000-0xbfffffff window]
[ 0.291237] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.291238] pci_bus 0000:01: resource 1 [mem 0x74400000-0x745fffff]
[ 0.291240] pci_bus 0000:02: resource 1 [mem 0x74600000-0x746fffff]
[ 0.291868] PCI: CLS 64 bytes, default 64
[ 0.291886] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.291887] software IO TLB: mapped [mem 0x0000000056efd000-0x000000005aefd000] (64MB)
[ 0.291907] Unpacking initramfs...
[ 0.295534] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns
[ 0.295695] clocksource: Switched to clocksource tsc
[ 0.295716] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.296125] Initialise system trusted keyrings
[ 0.296149] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[ 0.296157] zbud: loaded
[ 0.296247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.296253] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.296256] ntfs3: Max link count 4000
[ 0.296256] ntfs3: Enabled Linux POSIX ACLs support
[ 0.296257] ntfs3: Read-only LZX/Xpress compression included
[ 0.296259] fuse: init (API version 7.38)
[ 0.296340] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.296408] aufs 6.5-20230918
[ 0.302801] xor: automatically using best checksumming function avx
[ 0.302803] Key type asymmetric registered
[ 0.302803] Asymmetric key parser 'x509' registered
[ 0.302814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.303160] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[ 0.303388] pcieport 0000:00:1d.3: PME: Signaling with IRQ 123
[ 0.303489] efifb: probing for efifb
[ 0.303497] efifb: framebuffer at 0x4000000000, using 1200k, total 1200k
[ 0.303499] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.303500] efifb: scrolling: redraw
[ 0.303500] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.303561] Console: switching to colour frame buffer device 80x30
[ 0.303793] fb0: EFI VGA frame buffer device
[ 0.304524] ACPI: AC: AC Adapter [ADP1] (off-line)
[ 0.304576] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.304592] ACPI: button: Power Button [PWRB]
[ 0.304615] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.304628] ACPI: button: Sleep Button [SLPB]
[ 0.304652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.304689] ACPI: button: Power Button [PWRF]
[ 0.306786] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.306788] ACPI: thermal: Thermal Zone [TZ01] (-273 C)
[ 0.306898] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.306899] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.307068] hpet_acpi_add: no address or irqs in _CRS
[ 0.307087] Linux agpgart interface v0.103
[ 0.307133] ACPI: bus type drm_connector registered
[ 0.311054] loop: module loaded
[ 0.311079] usbcore: registered new interface driver rtsx_usb
[ 0.311342] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 0.311343] ahci 0000:00:17.0: version 3.0
[ 0.311388] nvme nvme0: pci function 0000:02:00.0
[ 0.315610] nvme nvme0: missing or invalid SUBNQN field.
[ 0.317103] nvme nvme0: allocated 16 MiB host memory buffer.
[ 0.320146] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.321738] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.321743] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
[ 0.321886] scsi host0: ahci
[ 0.321923] ata1: SATA max UDMA/133 abar m2048@0x74702000 port 0x74702100 irq 124
[ 0.322169] Fusion MPT base driver 3.04.20
[ 0.322170] Copyright (c) 1999-2008 LSI Corporation
[ 0.322173] Fusion MPT SPI Host driver 3.04.20
[ 0.322178] Fusion MPT SAS Host driver 3.04.20
[ 0.322254] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 0.322259] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[ 0.323316] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 0.323518] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 0.323520] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[ 0.323522] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.323553] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.323555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.323557] usb usb1: Product: xHCI Host Controller
[ 0.323558] usb usb1: Manufacturer: Linux 6.5.5-porteus xhci-hcd
[ 0.323559] usb usb1: SerialNumber: 0000:00:0d.0
[ 0.323639] hub 1-0:1.0: USB hub found
[ 0.323647] hub 1-0:1.0: 1 port detected
[ 0.323839] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.323841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.323843] usb usb2: Product: xHCI Host Controller
[ 0.323844] usb usb2: Manufacturer: Linux 6.5.5-porteus xhci-hcd
[ 0.323845] usb usb2: SerialNumber: 0000:00:0d.0
[ 0.323906] hub 2-0:1.0: USB hub found
[ 0.323914] hub 2-0:1.0: 1 port detected
[ 0.323926] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)
[ 0.323951] ACPI Error: Aborting method \_SB.PC00.TXHC.RHUB.SS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 0.323979] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)
[ 0.323997] ACPI Error: Aborting method \_SB.PC00.TXHC.RHUB.SS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 0.324177] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.324181] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.324862] nvme0n1: p1 p2 p3 p4
[ 0.325281] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[ 0.325504] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.325507] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.325509] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.325532] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.325534] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.325536] usb usb3: Product: xHCI Host Controller
[ 0.325537] usb usb3: Manufacturer: Linux 6.5.5-porteus xhci-hcd
[ 0.325538] usb usb3: SerialNumber: 0000:00:14.0
[ 0.325613] hub 3-0:1.0: USB hub found
[ 0.325633] hub 3-0:1.0: 12 ports detected
[ 0.326794] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.326797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.326798] usb usb4: Product: xHCI Host Controller
[ 0.326799] usb usb4: Manufacturer: Linux 6.5.5-porteus xhci-hcd
[ 0.326800] usb usb4: SerialNumber: 0000:00:14.0
[ 0.326861] hub 4-0:1.0: USB hub found
[ 0.326874] hub 4-0:1.0: 4 ports detected
[ 0.327319] usb: port power management may be unreliable
[ 0.327432] usbcore: registered new interface driver uas
[ 0.327446] usbcore: registered new interface driver usb-storage
[ 0.327450] usbcore: registered new interface driver ums-alauda
[ 0.327454] usbcore: registered new interface driver ums-cypress
[ 0.327457] usbcore: registered new interface driver ums-datafab
[ 0.327460] usbcore: registered new interface driver ums_eneub6250
[ 0.327464] usbcore: registered new interface driver ums-freecom
[ 0.327467] usbcore: registered new interface driver ums-isd200
[ 0.327471] usbcore: registered new interface driver ums-jumpshot
[ 0.327474] usbcore: registered new interface driver ums-karma
[ 0.327477] usbcore: registered new interface driver ums-onetouch
[ 0.327481] usbcore: registered new interface driver ums-realtek
[ 0.327484] usbcore: registered new interface driver ums-sddr09
[ 0.327487] usbcore: registered new interface driver ums-sddr55
[ 0.327491] usbcore: registered new interface driver ums-usbat
[ 0.327495] usbcore: registered new device driver apple-mfi-fastcharge
[ 0.327520] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.327521] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.328290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.328353] mousedev: PS/2 mouse device common for all mice
[ 0.328451] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.328952] rtc_cmos rtc_cmos: registered as rtc0
[ 0.329045] rtc_cmos rtc_cmos: setting system clock to 2023-12-01T00:56:15 UTC (1701392175)
[ 0.329060] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[ 0.329434] intel_pstate: Intel P-state driver initializing
[ 0.329610] intel_pstate: HWP enabled
[ 0.329621] sdhci: Secure Digital Host Controller Interface driver
[ 0.329621] sdhci: Copyright(c) Pierre Ossman
[ 0.329636] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0)
[ 0.329646] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 0.329647] wbsd: Copyright(c) Pierre Ossman
[ 0.329664] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 0.329715] usbcore: registered new interface driver vub300
[ 0.329719] usbcore: registered new interface driver ushc
[ 0.329731] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.329793] hid: raw HID events driver (C) Jiri Kosina
[ 0.329803] usbcore: registered new interface driver usbhid
[ 0.329804] usbhid: USB HID core driver
[ 0.329980] intel_pmc_core INT33A1:00: initialized
[ 0.330017] mmc0: CQHCI version 5.10
[ 0.330104] Initializing XFRM netlink socket
[ 0.330112] NET: Registered PF_PACKET protocol family
[ 0.330132] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit
[ 0.330462] microcode: Microcode Update Driver: v2.2.
[ 0.330466] IPI shorthand broadcast: enabled
[ 0.331777] sched_clock: Marking stable (327001177, 4438108)->(344279195, -12839910)
[ 0.331834] registered taskstats version 1
[ 0.331853] Loading compiled-in X.509 certificates
[ 0.335211] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.370142] Freeing initrd memory: 900K
[ 0.370888] Loaded X.509 cert 'Build time autogenerated kernel key: 1895d7f18cef999c7a74af79081e0ec76183caa2'
[ 0.372010] Key type .fscrypt registered
[ 0.372011] Key type fscrypt-provisioning registered
[ 0.372243] Btrfs loaded, zoned=no, fsverity=no
[ 0.372381] Key type encrypted registered
[ 0.372449] clk: Disabling unused clocks
[ 0.372450] ALSA device list:
[ 0.372452] No soundcards found.
[ 0.522977] mmc0: Failed to initialize a non-removable card
[ 0.569484] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 0.631751] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.632196] ata1.00: ATA-11: SPCC Solid State Disk, SBFM61.3, max UDMA/133
[ 0.632388] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.633227] ata1.00: configured for UDMA/133
[ 0.633551] scsi 0:0:0:0: Direct-Access ATA SPCC Solid State 61.3 PQ: 0 ANSI: 5
[ 0.634468] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.634515] sd 0:0:0:0: [sda] Write Protect is off
[ 0.634525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.634650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.634840] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.637136] sda: sda1 sda2 sda3 sda4 sda5
[ 0.637551] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.638810] Freeing unused kernel image (initmem) memory: 2072K
[ 0.643459] Write protecting the kernel read-only data: 16384k
[ 0.644735] Freeing unused kernel image (rodata/data gap) memory: 1564K
[ 0.644749] rodata_test: all tests were successful
[ 0.644765] Run /init as init process
[ 0.644768] with arguments:
[ 0.644770] /init
[ 0.644772] utc
[ 0.644774] with environment:
[ 0.644776] HOME=/
[ 0.644779] TERM=linux
[ 0.644781] BOOT_IMAGE=/boot/syslinux/vmlinuz
[ 0.644783] from=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0
[ 0.644786] changes=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0/porteus
[ 0.644788] timezone=America/Denver
[ 0.644791] login=root
[ 0.697890] usb 3-2: New USB device found, idVendor=17ef, idProduct=60d1, bcdDevice= 1.00
[ 0.697908] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.697915] usb 3-2: Product: Lenovo Wireless Mouse
[ 0.697920] usb 3-2: Manufacturer: Lenovo
[ 0.703285] input: Lenovo Lenovo Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input4
[ 0.703491] input: Lenovo Lenovo Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input5
[ 0.703633] input: Lenovo Lenovo Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input6
[ 0.710500] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 0.755755] input: Lenovo Lenovo Wireless Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input7
[ 0.756064] hid-generic 0003:17EF:60D1.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [Lenovo Lenovo Wireless Mouse] on usb-0000:00:14.0-2/input0
[ 0.809885] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 0.824860] usb 4-2: New USB device found, idVendor=05e3, idProduct=0747, bcdDevice= 8.19
[ 0.824881] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 0.824888] usb 4-2: Product: USB Storage
[ 0.824893] usb 4-2: Manufacturer: Generic
[ 0.824897] usb 4-2: SerialNumber: 000000000819
[ 0.827959] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 0.828582] scsi host1: usb-storage 4-2:1.0
[ 0.937683] usb 3-6: new low-speed USB device number 3 using xhci_hcd
[ 1.037658] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.071512] usb 3-6: New USB device found, idVendor=04b3, idProduct=3025, bcdDevice= 1.09
[ 1.071530] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.071537] usb 3-6: Product: USB NetVista Full Width Keyboard.
[ 1.071543] usb 3-6: Manufacturer: LITE-ON Technology
[ 1.079391] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:04B3:3025.0002/input/input9
[ 1.091636] EXT4-fs (sda4): warning: mounting unchecked fs, running e2fsck is recommended
[ 1.109523] EXT4-fs (sda4): mounted filesystem adc27d2d-2446-4511-9bf7-18323885643b r/w without journal. Quota mode: disabled.
[ 1.115812] EXT4-fs (sda5): mounted filesystem e9db2bef-e029-4763-ad4b-85a9def57fd7 r/w with ordered data mode. Quota mode: disabled.
[ 1.130756] hid-generic 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-6/input0
[ 1.245658] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[ 1.374722] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 1.374741] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.890620] scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
[ 2.301540] sd 1:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 2.302133] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.302141] sd 1:0:0:0: [sdb] Mode Sense: 87 00 00 00
[ 2.302713] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.327012] sdb: sdb1 sdb2 sdb3
[ 2.327424] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 3.268288] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.279805] EXT4-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended
[ 3.281498] EXT4-fs (sdb2): mounted filesystem c63d22fb-d601-4b92-bd05-cb050bb2aeb0 r/w without journal. Quota mode: disabled.
[ 3.297656] EXT4-fs (sdb3): mounted filesystem 3a497783-90f2-4699-939d-6c758b1840d2 r/w with ordered data mode. Quota mode: disabled.
[ 3.352789] loop0: detected capacity change from 0 to 190664
[ 3.463591] loop0: detected capacity change from 0 to 190664
[ 3.466043] loop1: detected capacity change from 0 to 251696
[ 3.471131] loop2: detected capacity change from 0 to 228736
[ 3.477049] loop3: detected capacity change from 0 to 35936
[ 3.482233] loop4: detected capacity change from 0 to 27944
[ 3.487801] loop5: detected capacity change from 0 to 421872
[ 3.494649] loop6: detected capacity change from 0 to 384
[ 3.499696] loop7: detected capacity change from 0 to 4568
[ 3.506317] loop8: detected capacity change from 0 to 141880
[ 3.512103] loop9: detected capacity change from 0 to 6264
[ 4.522727] NET: Registered PF_INET6 protocol family
[ 4.532646] Segment Routing with IPv6
[ 4.532649] RPL Segment Routing with IPv6
[ 4.532664] In-situ OAM (IOAM) with IPv6
[ 4.715840] udevd[726]: starting eudev-3.2.11
[ 4.926718] Consider using thermal netlink events interface
[ 5.008498] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.045461] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 5.085368] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[ 5.092129] Intel(R) 2.5G Ethernet Linux Driver
[ 5.092133] Copyright(c) 2018 Intel Corporation.
[ 5.092702] igc 0000:01:00.0: PTM enabled, 4ns granularity
[ 5.095247] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 5.095357] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.095393] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.111306] i2c i2c-1: 1/2 memory slots populated (from DMI)
[ 5.111743] i2c i2c-1: Successfully instantiated SPD at 0x50
[ 5.114411] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.115769] intel_rapl_common: Found RAPL domain package
[ 5.137055] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
[ 5.142822] pps pps0: new PPS source ptp0
[ 5.142850] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
[ 5.170805] igc 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 5.170811] igc 0000:01:00.0 eth0: MAC: 84:47:09:20:21:3a
[ 5.215480] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.215484] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.215486] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.215487] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.215487] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 6.143802] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.149391] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.353810] cryptd: max_cpu_qlen set to 1000
[ 7.505476] AVX2 version of gcm_enc/dec engaged.
[ 7.505537] AES CTR mode by8 optimization enabled
[ 7.514833] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.514844] cfg80211: failed to load regulatory.db
[ 7.545021] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 7.545051] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 7.568627] Intel(R) Wireless WiFi driver for Linux
[ 7.568759] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 7.570641] iwlwifi 0000:00:14.3: Detected crf-id 0x1300504, cnv-id 0x80400 wfpm id 0x80000030
[ 7.570689] iwlwifi 0000:00:14.3: PCI dev 54f0/0074, rev=0x370, rfid=0x10a100
[ 7.589310] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-83.ucode failed with error -2
[ 7.589386] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-82.ucode failed with error -2
[ 7.589454] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-81.ucode failed with error -2
[ 7.589513] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-80.ucode failed with error -2
[ 7.589565] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-79.ucode failed with error -2
[ 7.589616] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-78.ucode failed with error -2
[ 7.589667] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-77.ucode failed with error -2
[ 7.589717] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-76.ucode failed with error -2
[ 7.589767] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-75.ucode failed with error -2
[ 7.589817] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-74.ucode failed with error -2
[ 7.589867] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-73.ucode failed with error -2
[ 7.589917] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-72.ucode failed with error -2
[ 7.589968] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-71.ucode failed with error -2
[ 7.590020] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-70.ucode failed with error -2
[ 7.590070] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-69.ucode failed with error -2
[ 7.590121] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-68.ucode failed with error -2
[ 7.590181] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-67.ucode failed with error -2
[ 7.590231] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-66.ucode failed with error -2
[ 7.590297] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-65.ucode failed with error -2
[ 7.590360] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-64.ucode failed with error -2
[ 7.590418] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-63.ucode failed with error -2
[ 7.590483] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-62.ucode failed with error -2
[ 7.590540] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-61.ucode failed with error -2
[ 7.590590] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-60.ucode failed with error -2
[ 7.591371] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-59.ucode failed with error -2
[ 7.591378] iwlwifi 0000:00:14.3: no suitable firmware found!
[ 7.591381] iwlwifi 0000:00:14.3: minimum version required: iwlwifi-so-a0-hr-b0-59
[ 7.591384] iwlwifi 0000:00:14.3: maximum version supported: iwlwifi-so-a0-hr-b0-83
[ 7.591386] iwlwifi 0000:00:14.3: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[ 8.154166] Bluetooth: Core ver 2.22
[ 8.154182] NET: Registered PF_BLUETOOTH protocol family
[ 8.154183] Bluetooth: HCI device and connection manager initialized
[ 8.154187] Bluetooth: HCI socket layer initialized
[ 8.154189] Bluetooth: L2CAP socket layer initialized
[ 8.154191] Bluetooth: SCO socket layer initialized
[ 8.262965] usbcore: registered new interface driver btusb
[ 8.281159] Bluetooth: hci0: Device revision is 2
[ 8.281164] Bluetooth: hci0: Secure boot is enabled
[ 8.281165] Bluetooth: hci0: OTP lock is enabled
[ 8.281166] Bluetooth: hci0: API lock is enabled
[ 8.281166] Bluetooth: hci0: Debug lock is disabled
[ 8.281167] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 8.281169] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 8.282848] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0040-4150.sfi (-2)
[ 8.283135] Bluetooth: hci0: Reading supported features failed (-56)
[ 8.283139] Bluetooth: hci0: Error reading debug features
Code: Select all
[ 10.752]
X.Org X Server 1.20.14
X Protocol Version 11, Revision 0
[ 10.752] Build Operating System: Slackware 15.0 Slackware Linux Project
[ 10.752] Current Operating System: Linux porteus.example.net 6.5.5-porteus #1 SMP PREEMPT_DYNAMIC Sat Sep 23 18:21:43 MSK 2023 x86_64
[ 10.752] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz from=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0 changes=UUID:c63d22fb-d601-4b92-bd05-cb050bb2aeb0/porteus timezone=America/Denver utc login=root initrd=/boot/syslinux/initrd.xz
[ 10.752] Build Date: 29 March 2023 01:43:21PM
[ 10.752]
[ 10.752] Current version of pixman: 0.40.0
[ 10.752] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.752] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.752] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 30 17:56:25 2023
[ 10.757] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.782] (==) No Layout section. Using the first Screen section.
[ 10.782] (==) No screen section available. Using defaults.
[ 10.782] (**) |-->Screen "Default Screen Section" (0)
[ 10.782] (**) | |-->Monitor "<default monitor>"
[ 10.782] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.782] (==) Automatically adding devices
[ 10.782] (==) Automatically enabling devices
[ 10.782] (==) Automatically adding GPU devices
[ 10.782] (==) Automatically binding GPU devices
[ 10.782] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 10.783] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 10.783] Entry deleted from font path.
[ 10.783] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 10.783] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[ 10.784] Entry deleted from font path.
[ 10.784] (==) FontPath set to:
/usr/share/fonts/TTF
[ 10.784] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 10.784] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.784] (II) Loader magic: 0x619c80
[ 10.784] (II) Module ABI versions:
[ 10.784] X.Org ANSI C Emulation: 0.4
[ 10.784] X.Org Video Driver: 24.1
[ 10.784] X.Org XInput driver : 24.1
[ 10.784] X.Org Server Extension : 10.0
[ 10.784] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.786] (--) PCI:*(0@0:2:0) 8086:46d1:1e50:8023 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 10.786] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.786] (II) LoadModule: "glx"
[ 10.791] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 10.867] (II) Module glx: vendor="X.Org Foundation"
[ 10.867] compiled for 1.20.14, module version = 1.0.0
[ 10.867] ABI class: X.Org Server Extension, version 10.0
[ 10.867] (==) Matched modesetting as autoconfigured driver 0
[ 10.867] (==) Matched fbdev as autoconfigured driver 1
[ 10.867] (==) Matched vesa as autoconfigured driver 2
[ 10.867] (==) Assigned the driver to the xf86ConfigLayout
[ 10.867] (II) LoadModule: "modesetting"
[ 10.867] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 10.888] (II) Module modesetting: vendor="X.Org Foundation"
[ 10.888] compiled for 1.20.14, module version = 1.20.14
[ 10.888] Module class: X.Org Video Driver
[ 10.888] ABI class: X.Org Video Driver, version 24.1
[ 10.888] (II) LoadModule: "fbdev"
[ 10.888] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 10.908] (II) Module fbdev: vendor="X.Org Foundation"
[ 10.908] compiled for 1.20.0, module version = 0.5.0
[ 10.908] Module class: X.Org Video Driver
[ 10.908] ABI class: X.Org Video Driver, version 24.0
[ 10.908] (II) LoadModule: "vesa"
[ 10.909] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 10.922] (II) Module vesa: vendor="X.Org Foundation"
[ 10.922] compiled for 1.20.10, module version = 2.5.0
[ 10.922] Module class: X.Org Video Driver
[ 10.922] ABI class: X.Org Video Driver, version 24.1
[ 10.922] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.922] (II) FBDEV: driver for framebuffer: fbdev
[ 10.922] (II) VESA: driver for VESA chipsets: vesa
[ 10.922] (++) using VT number 7
[ 10.922] (II) modeset(0): using drv /dev/dri/card0
[ 10.923] (WW) Falling back to old probe method for fbdev
[ 10.923] (II) Loading sub module "fbdevhw"
[ 10.923] (II) LoadModule: "fbdevhw"
[ 10.924] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 10.947] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 10.947] compiled for 1.20.14, module version = 0.0.2
[ 10.947] ABI class: X.Org Video Driver, version 24.1
[ 10.947] (EE) open /dev/fb0: No such file or directory
[ 10.947] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.947] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 10.947] (==) modeset(0): RGB weight 888
[ 10.947] (==) modeset(0): Default visual is TrueColor
[ 10.947] (II) Loading sub module "glamoregl"
[ 10.947] (II) LoadModule: "glamoregl"
[ 10.947] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 11.032] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11.032] compiled for 1.20.14, module version = 1.0.1
[ 11.032] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.591] (II) modeset(0): Refusing to try glamor on llvmpipe
[ 12.592] (EE) modeset(0): glamor initialization failed
[ 12.592] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[ 12.592] (II) modeset(0): Double-buffered shadow updates: off
[ 12.592] (II) modeset(0): Output DP-1 has no monitor section
[ 12.592] (II) modeset(0): Output DP-2 has no monitor section
[ 12.593] (II) modeset(0): EDID for output DP-1
[ 12.593] (II) modeset(0): EDID for output DP-2
[ 12.593] (II) modeset(0): Output DP-1 disconnected
[ 12.593] (II) modeset(0): Output DP-2 disconnected
[ 12.593] (WW) modeset(0): No outputs definitely connected, trying again...
[ 12.593] (II) modeset(0): Output DP-1 disconnected
[ 12.593] (II) modeset(0): Output DP-2 disconnected
[ 12.593] (WW) modeset(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 12.593] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.593] (==) modeset(0): DPI set to (96, 96)
[ 12.593] (II) Loading sub module "fb"
[ 12.593] (II) LoadModule: "fb"
[ 12.593] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 12.600] (II) Module fb: vendor="X.Org Foundation"
[ 12.600] compiled for 1.20.14, module version = 1.0.0
[ 12.600] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.600] (II) Loading sub module "shadow"
[ 12.600] (II) LoadModule: "shadow"
[ 12.601] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 12.606] (II) Module shadow: vendor="X.Org Foundation"
[ 12.606] compiled for 1.20.14, module version = 1.1.0
[ 12.606] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.606] (II) UnloadModule: "fbdev"
[ 12.606] (II) Unloading fbdev
[ 12.606] (II) UnloadSubModule: "fbdevhw"
[ 12.606] (II) Unloading fbdevhw
[ 12.606] (II) UnloadModule: "vesa"
[ 12.606] (II) Unloading vesa
[ 12.606] (==) modeset(0): Backing store enabled
[ 12.606] (==) modeset(0): Silken mouse enabled
[ 12.608] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 12.608] (==) modeset(0): DPMS enabled
[ 12.608] (II) Initializing extension Generic Event Extension
[ 12.608] (II) Initializing extension SHAPE
[ 12.608] (II) Initializing extension MIT-SHM
[ 12.608] (II) Initializing extension XInputExtension
[ 12.608] (II) Initializing extension XTEST
[ 12.608] (II) Initializing extension BIG-REQUESTS
[ 12.608] (II) Initializing extension SYNC
[ 12.608] (II) Initializing extension XKEYBOARD
[ 12.608] (II) Initializing extension XC-MISC
[ 12.608] (II) Initializing extension XFIXES
[ 12.608] (II) Initializing extension RENDER
[ 12.608] (II) Initializing extension RANDR
[ 12.608] (II) Initializing extension COMPOSITE
[ 12.608] (II) Initializing extension DAMAGE
[ 12.608] (II) Initializing extension MIT-SCREEN-SAVER
[ 12.608] (II) Initializing extension DOUBLE-BUFFER
[ 12.608] (II) Initializing extension RECORD
[ 12.608] (II) Initializing extension DPMS
[ 12.608] (II) Initializing extension Present
[ 12.608] (II) Initializing extension DRI3
[ 12.608] (II) Initializing extension X-Resource
[ 12.608] (II) Initializing extension XVideo
[ 12.608] (II) Initializing extension XVideo-MotionCompensation
[ 12.608] (II) Initializing extension GLX
[ 12.608] (II) AIGLX: Screen 0 is not DRI2 capable
[ 12.611] (II) IGLX: Loaded and initialized swrast
[ 12.611] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 12.611] (II) Initializing extension XFree86-VidModeExtension
[ 12.611] (II) Initializing extension XFree86-DGA
[ 12.611] (II) Initializing extension XFree86-DRI
[ 12.611] (II) Initializing extension DRI2
[ 12.611] (II) modeset(0): Damage tracking initialized
[ 12.707] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12.707] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.707] (**) Power Button: Applying InputClass "keyboard-all"
[ 12.707] (II) LoadModule: "evdev"
[ 12.707] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 12.713] (II) Module evdev: vendor="X.Org Foundation"
[ 12.713] compiled for 1.20.10, module version = 2.10.6
[ 12.713] Module class: X.Org XInput Driver
[ 12.713] ABI class: X.Org XInput driver, version 24.1
[ 12.713] (II) Using input driver 'evdev' for 'Power Button'
[ 12.713] (**) Power Button: always reports core events
[ 12.713] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12.713] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.713] (--) evdev: Power Button: Found keys
[ 12.713] (II) evdev: Power Button: Configuring as keyboard
[ 12.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 12.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.713] (**) Option "xkb_rules" "evdev"
[ 12.713] (**) Option "xkb_layout" "us"
[ 12.713] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.730] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 12.730] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.730] (**) Video Bus: Applying InputClass "keyboard-all"
[ 12.730] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.730] (**) Video Bus: always reports core events
[ 12.730] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 12.730] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.730] (--) evdev: Video Bus: Found keys
[ 12.730] (II) evdev: Video Bus: Configuring as keyboard
[ 12.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 12.730] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.730] (**) Option "xkb_rules" "evdev"
[ 12.730] (**) Option "xkb_layout" "us"
[ 12.730] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.730] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 12.730] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.730] (**) Power Button: Applying InputClass "keyboard-all"
[ 12.730] (II) Using input driver 'evdev' for 'Power Button'
[ 12.730] (**) Power Button: always reports core events
[ 12.730] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 12.730] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.730] (--) evdev: Power Button: Found keys
[ 12.730] (II) evdev: Power Button: Configuring as keyboard
[ 12.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 12.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 12.730] (**) Option "xkb_rules" "evdev"
[ 12.730] (**) Option "xkb_layout" "us"
[ 12.730] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.731] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 12.731] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12.731] (**) Sleep Button: Applying InputClass "keyboard-all"
[ 12.731] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12.731] (**) Sleep Button: always reports core events
[ 12.731] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12.731] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12.731] (--) evdev: Sleep Button: Found keys
[ 12.731] (II) evdev: Sleep Button: Configuring as keyboard
[ 12.731] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 12.731] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 12.731] (**) Option "xkb_rules" "evdev"
[ 12.731] (**) Option "xkb_layout" "us"
[ 12.731] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.731] (II) config/udev: Adding input device Lenovo Lenovo Wireless Mouse (/dev/input/event4)
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 12.731] (II) Using input driver 'evdev' for 'Lenovo Lenovo Wireless Mouse'
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: always reports core events
[ 12.731] (**) evdev: Lenovo Lenovo Wireless Mouse: Device: "/dev/input/event4"
[ 12.731] (--) evdev: Lenovo Lenovo Wireless Mouse: Vendor 0x17ef Product 0x60d1
[ 12.731] (--) evdev: Lenovo Lenovo Wireless Mouse: Found 9 mouse buttons
[ 12.731] (--) evdev: Lenovo Lenovo Wireless Mouse: Found scroll wheel(s)
[ 12.731] (--) evdev: Lenovo Lenovo Wireless Mouse: Found relative axes
[ 12.731] (--) evdev: Lenovo Lenovo Wireless Mouse: Found x and y relative axes
[ 12.731] (II) evdev: Lenovo Lenovo Wireless Mouse: Configuring as mouse
[ 12.731] (II) evdev: Lenovo Lenovo Wireless Mouse: Adding scrollwheel support
[ 12.731] (**) evdev: Lenovo Lenovo Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 12.731] (**) evdev: Lenovo Lenovo Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.731] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input4/event4"
[ 12.731] (II) XINPUT: Adding extended input device "Lenovo Lenovo Wireless Mouse" (type: MOUSE, id 10)
[ 12.731] (II) evdev: Lenovo Lenovo Wireless Mouse: initialized for relative axes.
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: (accel) keeping acceleration scheme 1
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: (accel) acceleration profile 0
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: (accel) acceleration factor: 2.000
[ 12.731] (**) Lenovo Lenovo Wireless Mouse: (accel) acceleration threshold: 4
[ 12.731] (II) config/udev: Adding input device Lenovo Lenovo Wireless Mouse (/dev/input/mouse0)
[ 12.731] (II) No input driver specified, ignoring this device.
[ 12.731] (II) This device may have been added with another device file.
[ 12.731] (II) config/udev: Adding input device Lenovo Lenovo Wireless Mouse (/dev/input/event5)
[ 12.732] (II) No input driver specified, ignoring this device.
[ 12.732] (II) This device may have been added with another device file.
[ 12.732] (II) config/udev: Adding input device Lenovo Lenovo Wireless Mouse Consumer Control (/dev/input/event6)
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: Applying InputClass "keyboard-all"
[ 12.732] (II) Using input driver 'evdev' for 'Lenovo Lenovo Wireless Mouse Consumer Control'
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: always reports core events
[ 12.732] (**) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Device: "/dev/input/event6"
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Vendor 0x17ef Product 0x60d1
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Found 1 mouse buttons
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Found scroll wheel(s)
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Found relative axes
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Forcing relative x/y axes to exist.
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Found absolute axes
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Forcing absolute x/y axes to exist.
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Found keys
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Configuring as mouse
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Configuring as keyboard
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: Adding scrollwheel support
[ 12.732] (**) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: YAxisMapping: buttons 4 and 5
[ 12.732] (**) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input6/event6"
[ 12.732] (II) XINPUT: Adding extended input device "Lenovo Lenovo Wireless Mouse Consumer Control" (type: KEYBOARD, id 11)
[ 12.732] (**) Option "xkb_rules" "evdev"
[ 12.732] (**) Option "xkb_layout" "us"
[ 12.732] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: initialized for relative axes.
[ 12.732] (WW) evdev: Lenovo Lenovo Wireless Mouse Consumer Control: ignoring absolute axes.
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: (accel) keeping acceleration scheme 1
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: (accel) acceleration profile 0
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 12.732] (**) Lenovo Lenovo Wireless Mouse Consumer Control: (accel) acceleration threshold: 4
[ 12.732] (II) config/udev: Adding input device Lenovo Lenovo Wireless Mouse System Control (/dev/input/event7)
[ 12.732] (**) Lenovo Lenovo Wireless Mouse System Control: Applying InputClass "evdev keyboard catchall"
[ 12.732] (**) Lenovo Lenovo Wireless Mouse System Control: Applying InputClass "keyboard-all"
[ 12.732] (II) Using input driver 'evdev' for 'Lenovo Lenovo Wireless Mouse System Control'
[ 12.732] (**) Lenovo Lenovo Wireless Mouse System Control: always reports core events
[ 12.732] (**) evdev: Lenovo Lenovo Wireless Mouse System Control: Device: "/dev/input/event7"
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse System Control: Vendor 0x17ef Product 0x60d1
[ 12.732] (--) evdev: Lenovo Lenovo Wireless Mouse System Control: Found keys
[ 12.732] (II) evdev: Lenovo Lenovo Wireless Mouse System Control: Configuring as keyboard
[ 12.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:60D1.0001/input/input7/event7"
[ 12.732] (II) XINPUT: Adding extended input device "Lenovo Lenovo Wireless Mouse System Control" (type: KEYBOARD, id 12)
[ 12.732] (**) Option "xkb_rules" "evdev"
[ 12.732] (**) Option "xkb_layout" "us"
[ 12.732] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.732] (II) config/udev: Adding input device LITE-ON Technology USB NetVista Full Width Keyboard. (/dev/input/event8)
[ 12.732] (**) LITE-ON Technology USB NetVista Full Width Keyboard.: Applying InputClass "evdev keyboard catchall"
[ 12.732] (**) LITE-ON Technology USB NetVista Full Width Keyboard.: Applying InputClass "keyboard-all"
[ 12.732] (II) Using input driver 'evdev' for 'LITE-ON Technology USB NetVista Full Width Keyboard.'
[ 12.732] (**) LITE-ON Technology USB NetVista Full Width Keyboard.: always reports core events
[ 12.732] (**) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Device: "/dev/input/event8"
[ 12.733] (--) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Vendor 0x4b3 Product 0x3025
[ 12.733] (--) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Found keys
[ 12.733] (II) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Configuring as keyboard
[ 12.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:04B3:3025.0002/input/input9/event8"
[ 12.733] (II) XINPUT: Adding extended input device "LITE-ON Technology USB NetVista Full Width Keyboard." (type: KEYBOARD, id 13)
[ 12.733] (**) Option "xkb_rules" "evdev"
[ 12.733] (**) Option "xkb_layout" "us"
[ 12.733] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[ 12.733] (II) No input driver specified, ignoring this device.
[ 12.733] (II) This device may have been added with another device file.
[ 12.733] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 12.733] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12.733] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 12.733] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12.733] (**) AT Translated Set 2 keyboard: always reports core events
[ 12.733] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 12.733] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12.733] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12.733] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12.733] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 12.733] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 12.733] (**) Option "xkb_rules" "evdev"
[ 12.733] (**) Option "xkb_layout" "us"
[ 12.733] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 44.147] (II) config/udev: removing device LITE-ON Technology USB NetVista Full Width Keyboard.
[ 44.155] (II) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Close
[ 44.155] (II) UnloadModule: "evdev"
Submitting the form again...".
So good to see you're alive. 
And hopefully well. 
I am glad to see you 
