Porteus Kernel Builder

[Ed_P]

Ed_P, all looks good

It didn't load the iwlwifi ucode from the kernel. Same "error -2" as before.

How about 6.4.11?

Ok, but you said your 6.4.11 was based on fulalas's.

Ed_P, for the test.
I builded via fulalas config 64bit-ALL-kernel6.4.11-fulalas.tar

Added in 22 minutes 41 seconds:
Porteus-CINNAMON-v5.0-x86_64-230616-6.4.11.iso

Code: Select all

guest@porteus:~$ cat /etc/modprobe.d/iwlwifi.conf
options iwlwifi 11n_disable=1
options iwlwifi swcrypto=0
options iwlwifi bt_coex_active=0
options iwlwifi power_save=0
options iwlwifi uapsd_disable=1
options iwlmvm power_scheme=1
guest@porteus:~$ 

Code: Select all

uname -a
Linux porteus.example.net 6.4.11-porteus #1 SMP PREEMPT_DYNAMIC Fri Aug 18 09:09:38 MSK 2023 x86_64 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz GenuineIntel GNU/Linux

modinfo -F firmware /lib/modules/6.4.11-porteus/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
iwlwifi-100-5.ucode
  :
iwlwifi-cc-a0-78.ucode
iwlwifi-QuQnj-b0-jf-b0-78.ucode
iwlwifi-QuZ-a0-jf-b0-78.ucode
iwlwifi-QuZ-a0-hr-b0-78.ucode
iwlwifi-Qu-b0-jf-b0-78.ucode
iwlwifi-Qu-c0-hr-b0-78.ucode
iwlwifi-QuQnj-b0-hr-b0-78.ucode
iwlwifi-Qu-b0-hr-b0-78.ucode

dmesg | egrep 'ucode|wifi'
[    1.878617] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    1.880367] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    1.880388] iwlwifi 0000:00:14.3: PCI dev a0f0/4070, rev=0x351, rfid=0x10a100
[    1.881895] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-QuZ-a0-hr-b0-78.ucode failed with error -2
[    1.936523] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    1.936539] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    1.936793] iwlwifi 0000:00:14.3: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    2.067831] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    2.188038] iwlwifi 0000:00:14.3: Detected RF HR B5, rfid=0x10a100
[    2.257673] iwlwifi 0000:00:14.3: base HW address: 94:e2:3c:46:53:1b

Same "error -2" as before.

[Blaze]

WiFi is work for you or not?

[rych]

Will test nvidia driver later.

Nvidia driver WORKS. So, using Porteux's kernel in Porteus works, along with the accompanying PorteuX's nvidia driver. Still, this is perhaps unnecessary after all. I'm bringing back the Porteus native kernel+vmlinuz+nvidia, and will use PorteuX's stuff on PorteuX. Sorry for an off-topic discussion. Thanks for helpful responses.

[Ed_P]

WiFi is work for you or not?

Yes, WiFi works, when the ucode in my module get loaded. The ucodes in the kernel all fail to load.

[Blaze]

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.1 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.1.tar (~143 M)
https://www.mediafire.com/file/jwoje69i ... l6.5.1.tar
6f7a707124cee77fe5d1201c569af059 64bit-ALL-kernel6.5.1.tar

Note 1: Compiler that was used.
for kernel 6.5.1: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[neko]

@Blaze

Yesterday, aufs_Version was "6.x-rcN-20230828": it was not ready for kernel 6.5.1.
mkKernel-23.09.05-noarch-1.xzm

Today,aufs_Version is "6.5-20230904": it is ready for kernel 6.5.1.
mkKernel-23.09.06-noarch-1.xzm


Thanks.

[Blaze]

neko, yes 6.5.1 works properly for me.

Thanks.

Отправлено спустя 1 день 5 часов 33 минуты 16 секунд:
[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.2 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.2.tar (~143 M)
https://www.mediafire.com/file/ti159w6b ... l6.5.2.tar
de0c04c8105478df6c7c40149b253edc 64bit-ALL-kernel6.5.2.tar

Note 1: Compiler that was used.
for kernel 6.5.2: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[Ed_P]

64bit-ALL-kernel6.5.2.tar works for me. And the included iwlwifi driver loaded with no error -2.

Code: Select all

uname -a
Linux porteus.example.net 6.5.2-porteus #1 SMP PREEMPT_DYNAMIC Thu Sep  7 18:20:32 MSK 2023 x86_64 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz GenuineIntel GNU/Linux

modinfo -F firmware /lib/modules/6.5.2-porteus/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
iwlwifi-100-5.ucode
 :
 :
iwlwifi-9260-th-b0-jf-b0-46.ucode
iwlwifi-9000-pu-b0-jf-b0-46.ucode
iwlwifi-cc-a0-77.ucode
iwlwifi-QuZ-a0-jf-b0-77.ucode
iwlwifi-QuZ-a0-hr-b0-77.ucode
iwlwifi-Qu-b0-jf-b0-77.ucode
iwlwifi-Qu-c0-hr-b0-77.ucode
iwlwifi-Qu-b0-hr-b0-77.ucode
iwlwifi-ma-b0-mr-a0-83.ucode
iwlwifi-ma-b0-gf4-a0-83.ucode
iwlwifi-ma-b0-gf-a0-83.ucode
iwlwifi-ma-b0-hr-b0-83.ucode
iwlwifi-ma-a0-mr-a0-83.ucode
iwlwifi-ma-a0-gf4-a0-83.ucode
iwlwifi-ma-a0-gf-a0-83.ucode
iwlwifi-ma-a0-hr-b0-83.ucode
iwlwifi-ty-a0-gf-a0-83.ucode
iwlwifi-so-a0-gf-a0-83.ucode
iwlwifi-so-a0-hr-b0-83.ucode
iwlwifi-so-a0-jf-b0-83.ucode
iwlwifi-gl-c0-fm-c0-83.ucode
iwlwifi-gl-b0-fm-b0-83.ucode
iwlwifi-bz-a0-fm4-b0-83.ucode
iwlwifi-bz-a0-fm-c0-83.ucode
iwlwifi-bz-a0-fm-b0-83.ucode
iwlwifi-bz-a0-gf4-a0-83.ucode
iwlwifi-bz-a0-gf-a0-83.ucode
iwlwifi-bz-a0-hr-b0-83.ucode
iwlwifi-sc-a0-wh-a0-83.ucode
iwlwifi-sc-a0-gf4-a0-83.ucode
iwlwifi-sc-a0-gf-a0-83.ucode
iwlwifi-sc-a0-hr-b0-83.ucode
iwlwifi-sc-a0-hr-b0-83.ucode
iwlwifi-sc-a0-fm-c0-83.ucode
iwlwifi-sc-a0-fm-b0-83.ucode

dmesg | egrep 'ucode|wifi'
[    1.636178] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    1.637462] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    1.637483] iwlwifi 0000:00:14.3: PCI dev a0f0/4070, rev=0x351, rfid=0x10a100
[    1.703817] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    1.703832] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    1.704070] iwlwifi 0000:00:14.3: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    1.779851] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[    1.905135] iwlwifi 0000:00:14.3: Detected RF HR B5, rfid=0x10a100

Code: Select all

~#  uname -a
Linux porteus.example.net 6.5.2-porteus #1 SMP PREEMPT_DYNAMIC Thu Sep  7 18:20:32 MSK 2023 x86_64 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz GenuineIntel GNU/Linux

~#  cat /etc/porteus/*
001-core.xzm:20230617
002-xorg.xzm:20230617
002-xtra.xzm:20221211
003-cinnamon.xzm:20220925
initrd.xz:20220928

~#  ls -l /mnt/live/memory/images
000-kernel.xzm : Sep 7 11:26
001-core.xzm : Jun 14 00:42
002-xorg.xzm : Jun 17 01:18
002-xtra.xzm : Dec 11 2022
003-cinnamon.xzm : Sep 25 2022
011-slapt-get-0.11.6-x86_64-2gv.xzm : Oct 29 2022
06-crippled_sources-6.5.2-64bit.xzm : Sep 7 11:26
07-printing-x86_64-2023-02-04.xzm : Feb 4 2023
DellBlueTooth.xzm : Feb 20 2023
GETMODtweaks.xzm : Feb 17 2023
firefox-110.0-x86_64-en-US.xzm : Feb 16 2023
mychanges.xzm : Aug 30 16:13

~#  cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/Porteus-CINNAMON-v5.0-x86_64-230616-6.5.2.iso volume=10 reboot=cold extramod=/porteus5.0/Modules noload=kde;jinn;lxqt;xfce;lxde;mate;open;dat.xzm;menu2

ISO: /ISOs/Porteus-CINNAMON-v5.0-x86_64-230616-6.5.2.iso

[Blaze]

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 32bit.config)

6.5.3 <-- NEW : "All patches" patching was done.
32bit-ALL-kernel6.5.3.tar (~132 M)
https://www.mediafire.com/file/edvy696y ... l6.5.3.tar
1be97ad09ac5345793f79d7794224b6e 32bit-ALL-kernel6.5.3.tar

==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.3 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.3.tar (~144 M)
https://www.mediafire.com/file/4boeh8rh ... l6.5.3.tar
ce97bdcf5a4303e370282f3b852687ba 64bit-ALL-kernel6.5.3.tar

Note 1: Compiler that was used.
for kernel 6.5.3: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[Ed_P]

Works for me.

[Blaze]

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 32bit.config)

6.5.4 <-- NEW : "All patches" patching was done.
32bit-ALL-kernel6.5.4.tar (~132 M)
https://drive.google.com/file/d/1iKFZ76 ... sp=sharing
8589be72950422a2c153f1b6807ced47 32bit-ALL-kernel6.5.4.tar

==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.4 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.4.tar (~144 M)
https://drive.google.com/file/d/1fSGHWt ... sp=sharing
382fa084f4587f95f1ad97ffaa0104e3 64bit-ALL-kernel6.5.4.tar

Note 1: Compiler that was used.
for kernel 6.5.4: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[Blaze]

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 32bit.config)

6.5.5 <-- NEW : "All patches" patching was done.
32bit-ALL-kernel6.5.5.tar (~132 M)
https://www.mediafire.com/file/iullw7ws ... l6.5.5.tar
bd28309b81cbb178870d756fa5bef3ce 32bit-ALL-kernel6.5.5.tar

==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.5 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.5.tar (~144 M)
https://www.mediafire.com/file/65o36yzq ... l6.5.5.tar
d81092fa8e360213ce78df6b1d1bff8b 64bit-ALL-kernel6.5.5.tar

Note 1: Compiler that was used.
for kernel 6.5.5: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[Blaze]

neko, a new sof-firmware-2023.09-noarch-1.txz are available.

Thanks.

[Blaze]

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 32bit.config)

6.5.6 <-- NEW : "All patches" patching was done.
32bit-ALL-kernel6.5.6.tar (~132 M)
https://www.mediafire.com/file/8yqys53s ... l6.5.6.tar
6330062d5d2581ad2f3b663605b9a583 32bit-ALL-kernel6.5.6.tar

==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

6.5.6 <-- NEW : "All patches" patching was done.
64bit-ALL-kernel6.5.6.tar (~144 M)
https://www.mediafire.com/file/3g0mnrpd ... l6.5.6.tar
69a42d0d3e1246e6f60b24e2d7d64f21 64bit-ALL-kernel6.5.6.tar

Note 1: Compiler that was used.
for kernel 6.5.6: 11.2.0-x86_64

Note 2: Compilated under Porteus 5.0 (Slackware 15.0 base. Note. glibc-2.33 replaced on glibc-2.35)

Note 3: A new cryptsetup (version 2.3.5: presented by @ncmprhnsbl)

Thanks to neko for support.

[fulalas]

I noticed that my bluetooth (AX200) doesn't work because the firmware files aren't present:

Code: Select all

/lib/firmware/intel/ibt-20-1-3.ddc
/lib/firmware/intel/ibt-20-1-3.sfi

If I manually copy them from Slackware current firmware package, my bluetooth is detected.

Question: why the kernel xzm module doesn't include this firmware by default?