Porteus Kernel Builder

Post#1366 by **ncmprhnsbl** » 03 Sep 2021, 12:45

@neko, i'm wondering if the broadcom blacklist files should be removed, since they're really only needed for the proprietry broadcom wl driver, which isn't included anymore.. (although some of the kernel builtins for broadcom require proprietry firmware to work anyway)
that's these files:

Code: Select all

usr/local/share/mkKernel/lib/upkernel/base/000-kernel/etc/modprobe.d/b43_blacklist.conf 
usr/local/share/mkKernel/lib/upkernel/base/000-kernel/etc/modprobe.d/broadcom_blacklist.conf

Post#1367 by **Ed_P** » 03 Sep 2021, 17:19

ncmprhnsbl wrote: ↑
03 Sep 2021, 12:45
broadcom wl driver, which isn't included anymore.

What about users with older hardware?

Post#1368 by **Blaze** » 03 Sep 2021, 18:59

@neko, a new kernel-firmware-20210830_2e271f2-noarch-1.txz again. Thanks to beny for the report.

Post#1369 by **beny** » 03 Sep 2021, 20:51

hi blaze the kernel builder is ok something in my system went wrong,report here after the build of 5.14.1 and the winner is all run ok with the new kernel seem i have done something wrong and the kernel builder had confirmed it

Post#1370 by **neko** » 04 Sep 2021, 08:07

@ncmprhnsbl
What should be done?

@Blaze
"Kernel Builder" was updated to version 21.09.04. (Please refer to the first article.)

Thanks.

Post#1371 by **Blaze** » 05 Sep 2021, 06:03

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

[5.14.1] <-- NEW : "Only kbuild.patch, base.patch, and mmap.patch are adopted.
64bit-RES-kernel5.14.1.tar (~121M)
https://files.sberdisk.ru/s/kr4teFnq8jNmn2n
e271cf1386aab349aee934c5e243bc49 64bit-RES-kernel5.14.1.tar

Note 1: Compiler that was used.
for kernel 5.14.1: 11.2.0-x86_64
A new

x86_64 05-devel.xzm (GCC version 11.2.0)

Thanks to neko for his support.

Post#1372 by **maia** » 05 Sep 2021, 14:54

Thank you.

boot smoothly without problems. turns modules on and off.

It keeps appearing that bug in the nouveau module since version 5.11, which apparently does not cause damage.

Post#1373 by **neko** » 05 Sep 2021, 15:21

@Blaze
Your result: v5.14.1/Restricted (64bit-RES-kernel5.14.1.tar)

My result:
[AUFS patch report]
v5.10.62/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.10-20210809"
--->v5.10.62/ALL

v5.13.14/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.13-20210809"
--->v5.13.14/Restricted

v5.14.1/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.x-rcN-20210809"
--->v5.14.1/ALL

v5.4.144/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.4-20210412"
--->v5.4.144/ALL

What is a difference ?

Thanks.

Post#1374 by **neko** » 09 Sep 2021, 07:37

@Blaze

[AUFS patch report]
v5.10.63/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.10-20210906"
--->v5.10.63/ALL

v5.13.15/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.13-20210906"
--->v5.13.15/Restricted

v5.14.2/auf/aufs5-standalone.git/include/uapi/linux/aufs_type.h:#define AUFS_VERSION "5.14-20210906"
--->v5.14.2/ALL

Thanks.

Post#1375 by **beny** » 09 Sep 2021, 09:54

hi the aufs patch for the 5.14.2 work like a charm no hunk like the standalone previous patch.

Post#1376 by **Blaze** » 12 Sep 2021, 08:49

neko, my mistake.

[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm, 64bit.config)

[5.14.3] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.14.3.tar (~121 M)
https://files.sberdisk.ru/s/jZdckBBZ9XKna7J
c0b0a9ca462da1fe224848e773d3ae32 64bit-ALL-kernel5.14.3.tar

Note 1: Compiler that was used.
for kernel 5.14.3: 11.2.0-x86_64
A new

x86_64 05-devel.xzm (GCC version 11.2.0)

Thanks to neko for his support.

Post#1377 by **neko** » 12 Sep 2021, 14:34

"Kernel Builder" was updated to version 21.09.12. (Please refer to the first article.)

[Firmware database : kernel-firmware-20210903_2984e26-noarch-1plus.xzm]
that was created with
slackware package "kernel-firmware-20210903_2984e26-noarch-1.txz" and following arcklinux pakages.
alsa-firmware-1.2.4-noarch-2
ipw2100-fw-1.3-noarch-10
ipw2200-fw-3.1-noarch-8
linux-atm-2.5.2-x86_64-7
linux-firmware-20210818.c46b8c3-noarch-1
nvidia-utils-470.63.01-x86_64-1
sof-firmware-1.8-x86_64-1
wireless-regdb-2021.08.28-noarch-1

Thanks.

Post#1378 by **babam** » 13 Sep 2021, 17:38

neko and Blaze, please for kernel 5.15+ add this

Code: Select all

CONFIG_NTFS3_FS=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y

Thanks.

Post#1379 by **neko** » 13 Sep 2021, 23:11

@babam

I will try when ready.
But now AUFS patch is not ready for kernel 5.15-rc1.
And it ,that was built without the patch (overlay mode),
was booted
but not started on Porteus nor APorteus.

Thanks.

Post#1380 by **neko** » 14 Sep 2021, 05:36

"Kernel Builder" was updated to version 21.09.14. (Please refer to the first article.)

introduced kernel version 5.15 (5.15-rc) line.
Its config doesn't include AUFS function (only for OVERLAY).

[Example Kernel 5.15-rc1 Overlay ISO]
OV.Porteus-XFCE-v5.0rc3-k5.15-rc1.iso (371 M)
already been removed from upload site
md5sum: 3f35af62b19ba3cea3a2ede5bb19de38 OV.Porteus-XFCE-v5.0rc3-k5.15-rc1.iso

OV.APorteus-v21.09.13-x86_64.iso (562 M)
already been removed from upload site
md5sum: 6547767de08458a5cf72307d2a9c9034 OV.APorteus-v21.09.13-x86_64.iso

-------------------------
@babam
kernel version 5.15 (5.15-rc) config was set as followed.
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y

Thanks.