Porteus -v3.2 final
Re: Porteus -v3.2 final
brokenman, I got the same result as Jack. Maybe you're using another GUI and it comes with a different unrar version.
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus -v3.2 final
You can disable the entire ipv6 stack at kernel level (kernel cheat).
ipv6.disable=1
Disable just the ipv6 address (kernel cheat)
ipv6.disable_ipv6=1
Check to see if it worked.
netstat -tunlp |grep p6
This probably occurred during the last network manager problems. I recompiled networkmanager to use dhclient due to problems related to ipv6 and connection dropouts.
cyrillic is not required for de but I don't know for which languages cyrillic IS required. Until I can sort that out the file comes with all locales.
@Jack
@ fulalas
I am using Porteus-v3.2 final
I will try to reproduce this. What file system are you trying to decompress to? Is it a windows file system? Can you put a file in the downloads folder and try it from there?
ipv6.disable=1
Disable just the ipv6 address (kernel cheat)
ipv6.disable_ipv6=1
Check to see if it worked.
netstat -tunlp |grep p6
This probably occurred during the last network manager problems. I recompiled networkmanager to use dhclient due to problems related to ipv6 and connection dropouts.
cyrillic is not required for de but I don't know for which languages cyrillic IS required. Until I can sort that out the file comes with all locales.
@Jack
@ fulalas
I am using Porteus-v3.2 final
I will try to reproduce this. What file system are you trying to decompress to? Is it a windows file system? Can you put a file in the downloads folder and try it from there?
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
-
- Contributor
- Posts: 1857
- Joined: 09 Aug 2013, 14:25
- Distribution: Porteus and Nemesis
- Location: USA
Re: Porteus -v3.2 final
I am using Porteus-v3.2 final Same version but I had to change the boot part like we talk about in the PM I sent you. To get it to boot better and faster.
What file system are you trying to decompress to? I'm using Mate x86_64. If that what you mean.
Is it a windows file system? Not sure what you mead.
Can you put a file in the downloads folder and try it from there? That where all my files go.
What file system are you trying to decompress to? I'm using Mate x86_64. If that what you mean.
Is it a windows file system? Not sure what you mead.
Can you put a file in the downloads folder and try it from there? That where all my files go.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus -v3.2 final
Just tested disabling ipv6 via kernel command. Works well.
To decompress the rar files I am using:
engrampa-1.16.0-x86_64-1jay
unrar-5.4.5-x86_64-1jay
To decompress the rar files I am using:
engrampa-1.16.0-x86_64-1jay
unrar-5.4.5-x86_64-1jay
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
Re: Porteus -v3.2 final
Same here. Which GUI?brokenman wrote:I am using Porteus-v3.2 final
In fact it started as a download file, so it was already inside downloads folder. I think the bug isn't related to file system once manually installing unrar Engrampa works flawlessly. One more thing: the problem happens when you try to open Engrampa before trying to decompress.brokenman wrote:I will try to reproduce this. What file system are you trying to decompress to? Is it a windows file system? Can you put a file in the downloads folder and try it from there?
-
- Contributor
- Posts: 1857
- Joined: 09 Aug 2013, 14:25
- Distribution: Porteus and Nemesis
- Location: USA
Re: Porteus -v3.2 final
I remember when this project first started I think rc1 I had the same problem and how I fixed it was. I went from p7zip-15.14 change it to p7zip-9.20 then it started working again. And MC started working again to. I guest I can do it again.
EDIT:
I try it these ways.
1. I try to when downloading
2. Right click on file in download directory
3. Open Engrampa first then try to open the file
It didn't work on any way I try it.
EDIT:
I try it these ways.
1. I try to when downloading
2. Right click on file in download directory
3. Open Engrampa first then try to open the file
It didn't work on any way I try it.
Last edited by Jack on 13 Nov 2016, 21:15, edited 1 time in total.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus -v3.2 final
I have tried to reproduce this in xfce and mate (64bit) and no matter which way I try, the archive unpacks without error. Here are some questions:
What is the md5sum of the ISO you downloaded?
Are you using 32 or 64bit?
What is the md5sum of the ISO you downloaded?
Are you using 32 or 64bit?
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
-
- Contributor
- Posts: 1857
- Joined: 09 Aug 2013, 14:25
- Distribution: Porteus and Nemesis
- Location: USA
Re: Porteus -v3.2 final
Here is mind.
And it is 64bit
Code: Select all
dbaadcc0c3b30573644b0ec83aa2e6c0 Porteus-MATE-v3.2-x86_64.iso
536a3a62502efc4d912390567d612ba5 Porteus-MATE-v3.2-x86_64.iso.asc
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus -v3.2 final
The ISO on the server is at:
0c5220ba170ba01c6110c570ec74e94e ./Porteus-MATE-v3.2-x86_64.iso
Please download the new one.
0c5220ba170ba01c6110c570ec74e94e ./Porteus-MATE-v3.2-x86_64.iso
Please download the new one.
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
-
- Contributor
- Posts: 1857
- Joined: 09 Aug 2013, 14:25
- Distribution: Porteus and Nemesis
- Location: USA
Re: Porteus -v3.2 final
I downloaded it and the md5sum is the same. I will try it later tonight.
EDIT:
I did test on that file and it now it open up but if I use MC it don't open up.
Porteus v3.2 x86_64 Mate final.
This version I just downloaded took all most 3 minute to boot up. RC5 was the last one to boot up fast, all of the one's after rc5 takes 2-3 minute to boot up.
EDIT:
I did test on that file and it now it open up but if I use MC it don't open up.
Porteus v3.2 x86_64 Mate final.
This version I just downloaded took all most 3 minute to boot up. RC5 was the last one to boot up fast, all of the one's after rc5 takes 2-3 minute to boot up.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.
-
- Full of knowledge
- Posts: 2071
- Joined: 17 Jun 2013, 13:17
- Distribution: Porteus 3.2.2 XFCE 32bit
- Location: Germany
Re: Porteus -v3.2 final
@ brokenman
Thanks for the ipv6 cheats
stock XFCE 32bit uses UNRAR 5.40 =
Unsupported compression method : 6CH 2.4G不带FS-logo,VISTA/t6config.exe
Unsupported compression method : 6CH 2.4G不带FS-logo,VISTA/Windows_2K...
EDIT
Download via USM unrar-5.4.5-i486-1_slonly.xzm
Problem solved..
P7ZIP 16.02 > file > exit = doesn't close the app, alt + F4 does.
Thanks for the ipv6 cheats
stock XFCE 32bit uses UNRAR 5.40 =
Unsupported compression method : 6CH 2.4G不带FS-logo,VISTA/t6config.exe
Unsupported compression method : 6CH 2.4G不带FS-logo,VISTA/Windows_2K...
EDIT
Download via USM unrar-5.4.5-i486-1_slonly.xzm
Problem solved..
P7ZIP 16.02 > file > exit = doesn't close the app, alt + F4 does.
Last edited by donald on 14 Nov 2016, 00:39, edited 3 times in total.
Re: Porteus -v3.2 final
9835EF0F3516249A82FAEF92B2F46D69brokenman wrote:What is the md5sum of the ISO you downloaded?
64brokenman wrote:Are you using 32 or 64bit?
Can you please try with the file I told you and/or upload the one you're testing?
EDITED: I also tested in AF mode and the problem remains.
-
- Contributor
- Posts: 1857
- Joined: 09 Aug 2013, 14:25
- Distribution: Porteus and Nemesis
- Location: USA
Re: Porteus -v3.2 final
I tested your file and I got the same error like I got with my file.fulalas wrote:Here's a sample: http://www.mediafire.com/file/062efbtxe ... r-test.rar
I'm using XFCE. Installing unrar 5.3.11 solved the problem.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus -v3.2 final
I tested with both the file you offered and the one Jack offered. Both unpacked without a problem in every test. I'm not sure why I can't get it to fail in any way.Can you please try with the file I told you and/or upload the one you're testing?
The unrar version in the ISOs on the server are unrar-5.4.5
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Porteus -v3.2 final: Porteus Sytem Info freeze
Porteus System Info
Not to worry! Happens to the best of us. Think it was Mint brought out a whole number release, maybe 14 or 16, but then a few days later had to bring out a .1 release.
- Freezing after clcking on Partitions:
- And thought had it cracked, upon studying the following output:
Code: Select all
guest@porteus:~$ dmesg | grep -B10 -A5 29.398389] [ 16.120534] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device [ 16.123310] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:0d.0 on minor 0 [ 16.492700] kvm: Nested Virtualization enabled [ 16.492704] kvm: Nested Paging enabled [ 16.619995] ppdev: user-space parallel port driver [ 19.468554] Adding 130044k swap on /dev/sda11. Priority:-1 extents:1 across:130044k FS [ 19.483519] Adding 530108k swap on /dev/sda7. Priority:-2 extents:1 across:530108k FS [ 21.133059] forcedeth 0000:00:07.0 eth0: MSI enabled [ 21.298552] NET: Registered protocol family 10 [ 22.075265] nouveau 0000:00:0d.0: bus: MMIO write of 00540001 FAULT at 00b000 [ 29.398389] blk_update_request: I/O error, dev fd0, sector 0 [ 29.398392] floppy: error -5 while reading block 0 [ 32.390048] nouveau 0000:00:0d.0: bus: MMIO write of 00510001 FAULT at 00b010 [ 32.392534] nouveau 0000:00:0d.0: bus: MMIO write of 00510001 FAULT at 00b010 [ 39.512115] nouveau 0000:00:0d.0: bus: MMIO write of 024d0001 FAULT at 00b020 [ 97.976334] blk_update_request: I/O error, dev fd0, sector 0 guest@porteus:~$ dmesg | tail -n20 [ 441.024284] blk_update_request: I/O error, dev fd0, sector 0 [ 441.024289] floppy: error -5 while reading block 0 [ 453.328169] blk_update_request: I/O error, dev fd0, sector 0 [ 453.328176] floppy: error -5 while reading block 0 [ 465.673640] blk_update_request: I/O error, dev fd0, sector 0 [ 465.673646] floppy: error -5 while reading block 0 [ 478.052634] blk_update_request: I/O error, dev fd0, sector 0 [ 478.052639] floppy: error -5 while reading block 0 [ 490.357208] blk_update_request: I/O error, dev fd0, sector 0 [ 490.357213] floppy: error -5 while reading block 0 [ 502.662019] blk_update_request: I/O error, dev fd0, sector 0 [ 502.662024] floppy: error -5 while reading block 0 [ 514.968071] blk_update_request: I/O error, dev fd0, sector 0 [ 514.968076] floppy: error -5 while reading block 0 [ 527.270146] blk_update_request: I/O error, dev fd0, sector 0 [ 527.270151] floppy: error -5 while reading block 0 [ 539.572674] blk_update_request: I/O error, dev fd0, sector 0 [ 539.572679] floppy: error -5 while reading block 0 [ 551.871572] blk_update_request: I/O error, dev fd0, sector 0 [ 551.871577] floppy: error -5 while reading block 0
- As have a floppy controller but no floppy disk drive:
- But coming across donald's post and reference to Cold Case, not so sure anymore.
Not to worry! Happens to the best of us. Think it was Mint brought out a whole number release, maybe 14 or 16, but then a few days later had to bring out a .1 release.
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB