Не монтируется SD карта от фотоаппарата

Добро пожаловать!

Moderator: Blaze

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Не монтируется SD карта от фотоаппарата

Post#1 by ramd » 20 Jan 2015, 10:08

Всем привет!
Возникла проблемка - фотоаппарат по USB не виден вообще (винда видит).
СД-карта из фотика, вставленная в слот ноутбука, появляется в /dev/, но в /mnt/ не появляется.
В дублькоммандере появляется sdb, но при обращении с нему пишет - диск недоступен.
В тюнаре не появляется вообще.
В Gparted пишет ошибку диска, обьем 512мб вместо 2гб и видит неразмеченым.
Карта - кингстон 2гб, фат32
SLAX видит эту карту без проблем, фотки копируются, все работает.
В винде тоже все работает, но перезагружаться каждый раз = :(
Проблема в портеусах 3.0.1 - 3.1 - 3.1х64, а так-же в пуппирус
Как исправить в портеусе, подскажите?

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#2 by Blaze » 20 Jan 2015, 15:59

Здравствуйте.

Как монтируется SD карта в Slax (как extsd, sdcard, sdb)?

Пробуйте смонтировать в консоле, под учетной записью root, SD карту так

Code: Select all

su
mount -o remount,rw /mnt/extsd /mnt/sdcard
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#3 by ramd » 20 Jan 2015, 18:40

Здравствуйте!
Я бы подвесил снимки экрана но непойму пока, как здесь это делать (или выслал-бы на мейл)

В слаксе в /dev/disk/by-id появляется как несколько строчек:
usb_Mass_Storage ...
usb_SD_Storage ...
usb-ENE_Flash ...
в /mnt/ виден как CANON_DC, наряду с разделами HDD

В портеусе в /dev/disk/by-id появляется как одна строка
usb-ENE_Flash ...
в /mnt/ не появляется вообще ничего нового (там только тома ЖД).

в терминале попробовал - отвечает: не найдена точка монтирования

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#4 by Blaze » 20 Jan 2015, 18:54

Если можно, то скопируйте лог команды

Code: Select all

mount
в эту тему и лог команды

Code: Select all

dmesg
скопируйте на сервис http://pastebin.com/ и затем, так же приложите ссылку к данному сообщению.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#5 by ramd » 20 Jan 2015, 19:08

Code: Select all

root@porteus:~# mount
aufs on / type aufs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devtmpfs on /dev type devtmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda1 on /mnt/sda1 type vfat (noatime,nodiratime,suid,dev,exec,async,umask=0,check=s,utf8)
/dev/sda2 on /mnt/sda2 type ntfs (noatime,nodiratime,suid,dev,exec,async)
/dev/sda3 on /mnt/sda3 type ntfs (noatime,nodiratime,suid,dev,exec,async)
/dev/sda4 on /mnt/sda4 type vfat (noatime,nodiratime,suid,dev,exec,async,umask=0,check=s,utf8)
/dev/sr0 on /mnt/sr0 type iso9660 (noatime,nodiratime,suid,dev,exec,async)
/mnt/live/run on /run type none (rw,bind)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
/dev/sr1 on /mnt/sr1 type iso9660 (ro,noatime,nodiratime)

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#6 by ramd » 20 Jan 2015, 19:11

Code: Select all

root@porteus:~# dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.17.4-porteus (root@porteus) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 12 16:04:56 Local time zone must be set--
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f493fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f494000-0x000000003f4befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f4bf000-0x000000003f577fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f578000-0x000000003f5befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f5ecfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5ed000-0x000000003f5fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5ff000-0x000000003f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f600000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer AO532h/AO532h, BIOS V1.25 06/15/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask 0FFF00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36c00000-0x36ffffff]
[    0.000000]  [mem 0x36c00000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36bfffff]
[    0.000000]  [mem 0x30000000-0x36bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fdfff]
[    0.000000]  [mem 0x37000000-0x373fdfff] page 4k
[    0.000000] BRK [0x01671000, 0x01671fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3f3d9000-0x3f483fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37353000-0x373fdd07]
[    0.000000] Move RAMDISK from [mem 0x3f3d9000-0x3f483d07] to [mem 0x37353000-0x373fdd07]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x3F5FE120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x3F5FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 0x3F5F2000 007B21 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 0x3F586000 000040
[    0.000000] ACPI: HPET 0x3F5FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 0x3F5FB000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 0x3F5FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 0x3F5F1000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 0x3F5F0000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 0x3F5EE000 0004C4 (v02 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 0x3F5ED000 000194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 130MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 0 - 373fe000
[    0.000000] BRK [0x01672000, 0x01672fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x373fdfff]
[    0.000000]   HighMem  [mem 0x373fe000-0x3f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f493fff]
[    0.000000]   node   0: [mem 0x3f4bf000-0x3f577fff]
[    0.000000]   node   0: [mem 0x3f5bf000-0x3f5ecfff]
[    0.000000]   node   0: [mem 0x3f5ff000-0x3f5fffff]
[    0.000000] On node 0 totalpages: 259354
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 222206 pages, LIFO batch:31
[    0.000000]   HighMem zone: 261 pages used for memmap
[    0.000000]   HighMem zone: 33150 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f6b1c000 s27264 r0 d21888 u49152
[    0.000000] pcpu-alloc: s27264 r0 d21888 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257586
[    0.000000] Kernel command line: quiet dir=porteus pmedia=usbflash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000373fe:0003f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1020844K/1037416K available (4365K kernel code, 320K rwdata, 1024K rodata, 448K init, 380K bss, 16572K reserved, 132600K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd37000 - 0xfffff000   (2848 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.000000]       .init : 0xc1597000 - 0xc1607000   ( 448 kB)
[    0.000000]       .data : 0xc14437c3 - 0xc15953c0   (1350 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14437c3   (4365 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 0
[    0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.509 MHz processor
[    0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.01 BogoMIPS (lpj=1662509)
[    0.001023] pid_max: default: 32768 minimum: 301
[    0.001042] ACPI: Core revision 20140724
[    0.015955] ACPI: All ACPI Tables successfully acquired
[    0.016067] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016074] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.017307] Initializing cgroup subsys net_cls
[    0.017344] Disabled fast string operations
[    0.017349] CPU: Physical Processor ID: 0
[    0.017352] CPU: Processor Core ID: 0
[    0.017360] mce: CPU supports 5 MCE banks
[    0.017374] CPU0: Thermal monitoring handled by SMI
[    0.017389] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.017389] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.017558] Freeing SMP alternatives memory: 12K (c1607000 - c160a000)
[    0.017673] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.018195] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028214] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
[    0.029000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.029000] ... version:                3
[    0.029000] ... bit width:              40
[    0.029000] ... generic registers:      2
[    0.029000] ... value mask:             000000ffffffffff
[    0.029000] ... max period:             000000007fffffff
[    0.029000] ... fixed-purpose events:   3
[    0.029000] ... event mask:             0000000700000003
[    0.034164] CPU 1 irqstacks, hard=f653a000 soft=f653c000
[    0.034169] x86: Booting SMP configuration:
[    0.034173] .... node  #0, CPUs:      #1
[    0.002000] Initializing CPU#1
[    0.002000] Disabled fast string operations
[    0.002000] CPU1: Thermal monitoring handled by SMI
[    0.046058] x86: Booted up 1 node, 2 CPUs
[    0.046070] smpboot: Total of 2 processors activated (6650.03 BogoMIPS)
[    0.047012] devtmpfs: initialized
[    0.047625] PM: Registering ACPI NVS region [mem 0x3f578000-0x3f5befff] (290816 bytes)
[    0.047872] pinctrl core: initialized pinctrl subsystem
[    0.048179] NET: Registered protocol family 16
[    0.048513] EISA bus registered
[    0.048519] cpuidle: using governor ladder
[    0.048523] cpuidle: using governor menu
[    0.048615] ACPI: bus type PCI registered
[    0.048621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.048824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.048832] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.048836] PCI: Using MMCONFIG for extended config space
[    0.048840] PCI: Using configuration type 1 for base access
[    0.060220] ACPI: Added _OSI(Module Device)
[    0.060220] ACPI: Added _OSI(Processor Device)
[    0.060220] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.060220] ACPI: Added _OSI(Processor Aggregator Device)
[    0.067423] ACPI: Executed 1 blocks of module-level executable AML code
[    0.071358] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.072187] ACPI: Dynamic OEM Table Load:
[    0.072203] ACPI: SSDT 0xF65ACA00 0001F7 (v02 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.073275] ACPI: Dynamic OEM Table Load:
[    0.073288] ACPI: SSDT 0xF65ACC00 0001C7 (v02 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.085530] ACPI: Dynamic OEM Table Load:
[    0.085542] ACPI: SSDT 0xF6455900 0000D0 (v02 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.086528] ACPI: Dynamic OEM Table Load:
[    0.086540] ACPI: SSDT 0xF65900C0 000083 (v02 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.099150] ACPI: Interpreter enabled
[    0.099170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    0.099182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    0.099221] ACPI: (supports S0 S3 S4 S5)
[    0.099226] ACPI: Using IOAPIC for interrupt routing
[    0.099310] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236529] ACPI: Power Resource [FN00] (on)
[    0.238593] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.238608] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.238623] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20140724/nsarguments-189)
[    0.238774] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.238778] _OSC request data:1 1f 0 
[    0.238790] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.240730] PCI host bridge to bus 0000:00
[    0.240739] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.240746] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.240753] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.240759] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.240766] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.240786] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.241033] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.241052] pci 0000:00:02.0: reg 0x10: [mem 0x58180000-0x581fffff]
[    0.241062] pci 0000:00:02.0: reg 0x14: [io  0x60c0-0x60c7]
[    0.241073] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.241084] pci 0000:00:02.0: reg 0x1c: [mem 0x58000000-0x580fffff]
[    0.241315] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.241336] pci 0000:00:02.1: reg 0x10: [mem 0x58100000-0x5817ffff]
[    0.241629] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.241665] pci 0000:00:1b.0: reg 0x10: [mem 0x58200000-0x58203fff 64bit]
[    0.241807] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.241920] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.242090] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.242239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.242357] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.242512] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.242661] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.242774] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.242936] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.243018] pci 0000:00:1d.0: reg 0x20: [io  0x6080-0x609f]
[    0.243200] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.243358] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.243430] pci 0000:00:1d.1: reg 0x20: [io  0x6060-0x607f]
[    0.243607] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.243760] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.243833] pci 0000:00:1d.2: reg 0x20: [io  0x6040-0x605f]
[    0.243965] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.244124] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.244196] pci 0000:00:1d.3: reg 0x20: [io  0x6020-0x603f]
[    0.244329] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.244496] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.244530] pci 0000:00:1d.7: reg 0x10: [mem 0x58204400-0x582047ff]
[    0.244660] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.244808] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.244968] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.245276] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.245630] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.245664] pci 0000:00:1f.2: reg 0x10: [io  0x60b8-0x60bf]
[    0.245682] pci 0000:00:1f.2: reg 0x14: [io  0x60cc-0x60cf]
[    0.245699] pci 0000:00:1f.2: reg 0x18: [io  0x60b0-0x60b7]
[    0.245717] pci 0000:00:1f.2: reg 0x1c: [io  0x60c8-0x60cb]
[    0.245734] pci 0000:00:1f.2: reg 0x20: [io  0x60a0-0x60af]
[    0.245752] pci 0000:00:1f.2: reg 0x24: [mem 0x58204000-0x582043ff]
[    0.245824] pci 0000:00:1f.2: PME# supported from D3hot
[    0.246083] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.246155] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.246589] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
[    0.246635] pci 0000:01:00.0: reg 0x10: [mem 0x57000000-0x5703ffff 64bit]
[    0.246657] pci 0000:01:00.0: reg 0x18: [io  0x5000-0x507f]
[    0.246828] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.249036] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.249047] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.249057] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.249071] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.249291] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.249338] pci 0000:02:00.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit]
[    0.249526] pci 0000:02:00.0: supports D1
[    0.249532] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.251029] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.251040] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.251049] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.251063] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.251224] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.251245] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.251252] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.251258] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.251265] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.251303] pci_bus 0000:00: on NUMA node 0
[    0.313350] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.313530] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.313707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.313882] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.314066] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.314242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.314422] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.314599] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.316206] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.316345] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.316503] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.316503] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.316503] vgaarb: loaded
[    0.316503] vgaarb: bridge control possible 0000:00:02.0
[    0.316503] SCSI subsystem initialized
[    0.317061] libata version 3.00 loaded.
[    0.317075] ACPI: bus type USB registered
[    0.317170] usbcore: registered new interface driver usbfs
[    0.317215] usbcore: registered new interface driver hub
[    0.317227] usbcore: registered new device driver usb
[    0.317227] Linux video capture interface: v2.00
[    0.317276] Advanced Linux Sound Architecture Driver Initialized.
[    0.317282] PCI: Using ACPI for IRQ routing
[    0.327339] PCI: pci_cache_line_size set to 64 bytes
[    0.327420] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.327427] e820: reserve RAM buffer [mem 0x3f494000-0x3fffffff]
[    0.327432] e820: reserve RAM buffer [mem 0x3f578000-0x3fffffff]
[    0.327437] e820: reserve RAM buffer [mem 0x3f5ed000-0x3fffffff]
[    0.327441] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.327893] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.327908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.327918] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.330043] Switched to clocksource hpet
[    0.330189] pnp: PnP ACPI init
[    0.392516] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.392527] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.392534] system 00:00: [io  0x0610] has been reserved
[    0.392541] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.392548] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.392555] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.392562] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.392569] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.392578] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.392585] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.392592] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.392600] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.392607] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.392614] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.392622] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.392632] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.392769] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.392991] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.393200] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.393503] pnp: PnP ACPI: found 4 devices
[    0.393511] PnPBIOS: Disabled by ACPI PNP
[    0.435746] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.435758] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.435770] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.435780] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.435793] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.435801] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.435812] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.435822] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.435835] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.435856] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.435863] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.435869] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.435875] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.435882] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.435888] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.435895] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.435901] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.435907] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.435914] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.435921] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.435927] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.435933] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.435939] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.435988] NET: Registered protocol family 2
[    0.436429] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.436486] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.436542] TCP: Hash tables configured (established 8192 bind 8192)
[    0.436585] TCP: reno registered
[    0.436592] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.436609] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.436727] NET: Registered protocol family 1
[    0.436761] pci 0000:00:02.0: Video device with shadowed ROM
[    0.439209] PCI: CLS 64 bytes, default 64
[    0.439599] Unpacking initramfs...
[    0.658877] Freeing initrd memory: 684K (f7353000 - f73fe000)
[    0.658964] Simple Boot Flag at 0x44 set to 0x1
[    0.660160] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.666737] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.666962] fuse init (API version 7.23)
[    0.667274] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.668403] aufs 3.17-20141110
[    0.668416] msgmni has been set to 1736
[    0.668894] bounce: pool size: 64 pages
[    0.668928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.668933] io scheduler noop registered
[    0.668938] io scheduler deadline registered (default)
[    0.669459] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.669870] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.670156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.670225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.670349] intel_idle: MWAIT substates: 0x20220
[    0.670366] intel_idle: v0.4 model 0x1C
[    0.670370] intel_idle: lapic_timer_reliable_states 0x2
[    0.670383] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.794153] ACPI: AC Adapter [AC] (on-line)
[    0.794453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.794463] ACPI: Power Button [PWRB]
[    0.794651] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.794659] ACPI: Sleep Button [SLPB]
[    0.794855] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.794897] ACPI: Lid Switch [LID0]
[    0.795130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.795139] ACPI: Power Button [PWRF]
[    0.795464] isapnp: Scanning for PnP cards...
[    1.152387] isapnp: No Plug & Play device found
[    1.384232] ACPI: Battery Slot [BAT0] (battery present)
[    1.384494] Linux agpgart interface v0.103
[    1.384544] [drm] Initialized drm 1.1.0 20060810
[    1.387221] loop: module loaded
[    1.387419] usbcore: registered new interface driver rtsx_usb
[    1.387692] ahci 0000:00:1f.2: version 3.0
[    1.388049] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    1.388115] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.388165] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.388174] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.390134] scsi host0: ahci
[    1.390513] scsi host1: ahci
[    1.390859] scsi host2: ahci
[    1.391219] scsi host3: ahci
[    1.391418] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 26
[    1.391426] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 26
[    1.391432] ata3: DUMMY
[    1.391436] ata4: DUMMY
[    1.395095] scsi host4: pata_legacy
[    1.395272] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    1.696132] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.696758] ata1.00: unexpected _GTF length (4)
[    1.696952] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.696959] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.697596] ata1.00: unexpected _GTF length (4)
[    1.697789] ata1.00: configured for UDMA/133
[    1.698047] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[    1.698684] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.698693] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.698862] sd 0:0:0:0: [sda] Write Protect is off
[    1.698872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.698939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.707349]  sda: sda1 sda2 sda3 sda4
[    1.708395] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.003131] ata2: SATA link down (SStatus 0 SControl 300)
[    2.004408] scsi host5: pata_legacy
[    2.004580] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    2.155503] Fusion MPT base driver 3.04.20
[    2.155507] Copyright (c) 1999-2008 LSI Corporation
[    2.155527] Fusion MPT SPI Host driver 3.04.20
[    2.155605] Fusion MPT SAS Host driver 3.04.20
[    2.155677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.155681] ehci-pci: EHCI PCI platform driver
[    2.156038] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.156059] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.156085] ehci-pci 0000:00:1d.7: debug port 1
[    2.160032] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.160089] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58204400
[    2.166029] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.166735] hub 1-0:1.0: USB hub found
[    2.166777] hub 1-0:1.0: 8 ports detected
[    2.167794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.167810] ohci-pci: OHCI PCI platform driver
[    2.167861] uhci_hcd: USB Universal Host Controller Interface driver
[    2.168203] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.168223] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.168266] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[    2.168812] hub 2-0:1.0: USB hub found
[    2.168838] hub 2-0:1.0: 2 ports detected
[    2.169415] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.169432] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.169500] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[    2.170049] hub 3-0:1.0: USB hub found
[    2.170077] hub 3-0:1.0: 2 ports detected
[    2.170619] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.170637] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.170703] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[    2.171284] hub 4-0:1.0: USB hub found
[    2.171305] hub 4-0:1.0: 2 ports detected
[    2.171922] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.171939] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.172031] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[    2.172595] hub 5-0:1.0: USB hub found
[    2.172617] hub 5-0:1.0: 2 ports detected
[    2.173207] usbcore: registered new interface driver usb-storage
[    2.173242] usbcore: registered new interface driver ums-alauda
[    2.173275] usbcore: registered new interface driver ums-cypress
[    2.173308] usbcore: registered new interface driver ums-datafab
[    2.173340] usbcore: registered new interface driver ums_eneub6250
[    2.173371] usbcore: registered new interface driver ums-freecom
[    2.173404] usbcore: registered new interface driver ums-isd200
[    2.173436] usbcore: registered new interface driver ums-jumpshot
[    2.173468] usbcore: registered new interface driver ums-karma
[    2.173500] usbcore: registered new interface driver ums-onetouch
[    2.173543] usbcore: registered new interface driver ums-realtek
[    2.173576] usbcore: registered new interface driver ums-sddr09
[    2.173611] usbcore: registered new interface driver ums-sddr55
[    2.173645] usbcore: registered new interface driver ums-usbat
[    2.173748] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    2.187199] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.187303] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.187678] mousedev: PS/2 mouse device common for all mice
[    2.188473] rtc_cmos 00:01: RTC can wake from S4
[    2.188756] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.188805] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.188896] platform eisa.0: Probing EISA bus 0
[    2.188904] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.188912] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.188918] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.188925] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.188932] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.188938] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.188945] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.188952] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.188958] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.188964] platform eisa.0: EISA: Detected 0 cards
[    2.188995] sdhci: Secure Digital Host Controller Interface driver
[    2.188998] sdhci: Copyright(c) Pierre Ossman
[    2.189194] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    2.189198] wbsd: Copyright(c) Pierre Ossman
[    2.189311] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    2.189603] usbcore: registered new interface driver vub300
[    2.189661] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.190090] hidraw: raw HID events driver (C) Jiri Kosina
[    2.190191] usbcore: registered new interface driver usbhid
[    2.190195] usbhid: USB HID core driver
[    2.190418] TCP: cubic registered
[    2.190424] NET: Registered protocol family 17
[    2.190887] Using IPI No-Shortcut mode
[    2.191279] registered taskstats version 1
[    2.192102] rtc_cmos 00:01: setting system clock to 2015-01-20 21:01:52 UTC (1421787712)
[    2.192140] ALSA device list:
[    2.192144]   No soundcards found.
[    2.192492] Freeing unused kernel memory: 448K (c1597000 - c1607000)
[    2.204704] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.469079] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    2.587130] usb-storage 1-3:1.4: USB Mass Storage device detected
[    2.587381] scsi host6: usb-storage 1-3:1.4
[    2.587947] usb-storage 1-3:1.5: USB Mass Storage device detected
[    2.588243] scsi host7: usb-storage 1-3:1.5
[    2.635490] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.690108] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    2.702873] random: ntfs-3g urandom read with 108 bits of entropy available
[    2.790610] random: nonblocking pool is initialized
[    3.018110] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    3.134327] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[    3.134522] scsi host8: usb-storage 1-5:1.0
[    3.295052] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528321
[    3.358058] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.365427] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.588807] scsi 6:0:0:0: CD-ROM                     Mass Storage     2.31 PQ: 0 ANSI: 2
[    3.590627] sr 6:0:0:0: [sr0] scsi-1 drive
[    3.590635] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.590796] scsi 7:0:0:0: Direct-Access              SD Storage       2.31 PQ: 0 ANSI: 2
[    3.591274] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    3.594046] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[    3.879399] REISERFS warning (device loop10): sh-2006 read_super_block: bread failed (dev loop10, block 16, size 4096)
[    4.003971] REISERFS warning (device loop18): sh-2006 read_super_block: bread failed (dev loop18, block 16, size 4096)
[    4.136779] scsi 8:0:0:0: scsi scan: INQUIRY result too short (5), using 36
[    4.136790] scsi 8:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0
[    4.138193] sd 8:0:0:0: [sdc] Sector size 0 reported, assuming 512.
[    4.138206] sd 8:0:0:0: [sdc] 1 512-byte logical blocks: (512 B/512 B)
[    4.138212] sd 8:0:0:0: [sdc] 0-byte physical blocks
[    4.138622] sd 8:0:0:0: [sdc] Write Protect is off
[    4.138634] sd 8:0:0:0: [sdc] Mode Sense: 00 30 21 f1
[    4.139126] sd 8:0:0:0: [sdc] Asking for cache data failed
[    4.139135] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[    4.140489] sd 8:0:0:0: [sdc] Unsupported sector size 33536.
[    4.140501] sd 8:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[    4.140507] sd 8:0:0:0: [sdc] 33536-byte physical blocks
[    4.141241] sdc: detected capacity change from 512 to 0
[    4.142610] sd 8:0:0:0: [sdc] Unsupported sector size 134801408.
[    4.143360] sd 8:0:0:0: [sdc] Attached SCSI disk
[    5.044026] ISO 9660 Extensions: Microsoft Joliet Level 1
[    5.045150] ISOFS: changing to secondary root
[    6.585711] udevd[588]: starting version 182
[    8.063228] wmi: Mapper loaded
[    8.326834] ACPI: Fan [FAN] (on)
[    8.340281] thermal LNXTHERM:00: registered as thermal_zone0
[    8.340291] ACPI: Thermal Zone [THRM] (52 C)
[    8.551063] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    8.551110] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    8.551215] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    8.596143] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    8.596785] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    8.832046] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    9.086047] cfg80211: Calling CRDA to update world regulatory domain
[    9.170075] [drm] Memory usable by graphics device = 512M
[    9.170084] [drm] Replacing VGA console driver
[    9.392301] usbcore: registered new interface driver usbserial
[    9.392368] usbcore: registered new interface driver usbserial_generic
[    9.392429] usbserial: USB Serial support registered for generic
[    9.442218] Console: switching to colour dummy device 80x25
[    9.617260] usbcore: registered new interface driver option
[    9.617345] usbserial: USB Serial support registered for GSM modem (1-port)
[    9.617603] option 1-3:1.0: GSM modem (1-port) converter detected
[    9.643004] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[    9.643196] option 1-3:1.2: GSM modem (1-port) converter detected
[    9.644505] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[    9.644540] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.644546] [drm] Driver supports precise vblank timestamp query.
[    9.644737] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.729185] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[    9.729310] option 1-3:1.3: GSM modem (1-port) converter detected
[    9.731169] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[   10.119272] [drm] initialized overlay support
[   10.215258] fbcon: inteldrmfb (fb0) is primary device
[   10.382531] uvcvideo: Found UVC 1.00 device WebCam (0402:7670)
[   10.406829] usbcore: registered new interface driver cdc_ncm
[   10.416591] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[   10.419433] usbcore: registered new interface driver uvcvideo
[   10.419435] USB Video Class driver (1.1.1)
[   10.526384] usbcore: registered new interface driver cdc_wdm
[   10.848072] huawei_cdc_ncm 1-3:1.1: MAC-Address: 58:2c:80:13:92:63
[   10.848079] huawei_cdc_ncm 1-3:1.1: setting rx_max = 16384
[   10.850047] huawei_cdc_ncm 1-3:1.1: setting tx_max = 16384
[   10.948358] huawei_cdc_ncm 1-3:1.1: cdc-wdm0: USB WDM device
[   10.978167] huawei_cdc_ncm 1-3:1.1 wwan0: register 'huawei_cdc_ncm' at usb-0000:00:1d.7-3, Huawei CDC NCM device, 58:2c:80:13:92:63
[   10.994761] usbcore: registered new interface driver huawei_cdc_ncm
[   10.996115] Console: switching to colour frame buffer device 128x37
[   11.451338] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.451346] i915 0000:00:02.0: registered panic notifier
[   11.863620] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   12.185216] acpi device:27: registered as cooling_device3
[   12.185599] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   12.190236] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[   12.191319] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   12.386410] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.386424] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.386434] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.386442] sound hdaudioC0D0:    mono: mono_out=0x0
[   12.386450] sound hdaudioC0D0:    inputs:
[   12.386460] sound hdaudioC0D0:      Mic=0x18
[   12.386469] sound hdaudioC0D0:      Internal Mic=0x12
[   12.449341] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.449755] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.561081] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.724680] acer_wmi: Function bitmap for Communication Device: 0x1
[   12.724978] acer_wmi: Brightness must be controlled by acpi video driver
[   12.750886] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[   12.875752] ath: phy0: Enable LNA combining
[   12.883049] ath: phy0: ASPM enabled: 0x42
[   12.883062] ath: EEPROM regdomain: 0x8283
[   12.883067] ath: EEPROM indicates we should expect a country code
[   12.883074] ath: doing EEPROM country->regdmn map search
[   12.883079] ath: country maps to regdmn code: 0x3
[   12.883084] ath: Country alpha2 being used: RU
[   12.883088] ath: Regpair used: 0x3
[   13.142195] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.153131] cfg80211: Calling CRDA to update world regulatory domain
[   13.153345] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xfa240000, irq=17
[   14.711324] wl: module license 'unspecified' taints kernel.
[   14.711335] Disabling lock debugging due to kernel taint
[   18.255403] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.428552] NET: Registered protocol family 10
[   18.598421] nf_conntrack version 0.5.0 (15968 buckets, 63872 max)
[   20.181172] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[   20.217870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.299216] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   50.045249] PPP generic driver version 2.4.2
[   50.121059] PPP BSD Compression module registered
[   50.164167] PPP Deflate Compression module registered
[   76.896427] usb 1-5: USB disconnect, device number 4
[   79.390114] usb 1-5: new high-speed USB device number 5 using ehci-pci
[   79.506475] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[   79.507792] scsi host9: usb-storage 1-5:1.0
[   80.510761] scsi 9:0:0:0: Direct-Access       F                            PQ: 0 ANSI: 0
[   80.517262] sd 9:0:0:0: [sdc] Sector size 0 reported, assuming 512.
[   80.517283] sd 9:0:0:0: [sdc] 1 512-byte logical blocks: (512 B/512 B)
[   80.517295] sd 9:0:0:0: [sdc] 0-byte physical blocks
[   80.517753] sd 9:0:0:0: [sdc] Write Protect is off
[   80.517768] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00
[   80.519136] sd 9:0:0:0: [sdc] Asking for cache data failed
[   80.519150] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[   80.521038] sd 9:0:0:0: [sdc] Sector size 0 reported, assuming 512.
[   80.534499] sd 9:0:0:0: [sdc]  
[   80.534509] Result: hostbyte=0x00 driverbyte=0x08
[   80.534518] sd 9:0:0:0: [sdc]  
[   80.534524] Sense Key : 0x3 [current] 
[   80.534535] sd 9:0:0:0: [sdc]  
[   80.534540] ASC=0x14 ASCQ=0x0
[   80.534548] sd 9:0:0:0: [sdc] CDB: 
[   80.534552] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[   80.534575] end_request: critical medium error, dev sdc, sector 0
[   80.534585] Buffer I/O error on device sdc, logical block 0
[   80.549346] sd 9:0:0:0: [sdc]  
[   80.549356] Result: hostbyte=0x00 driverbyte=0x08
[   80.549364] sd 9:0:0:0: [sdc]  
[   80.549369] Sense Key : 0x3 [current] 
[   80.549379] sd 9:0:0:0: [sdc]  
[   80.549384] ASC=0x14 ASCQ=0x0
[   80.549392] sd 9:0:0:0: [sdc] CDB: 
[   80.549396] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[   80.549418] end_request: critical medium error, dev sdc, sector 0
[   80.549441] Buffer I/O error on device sdc, logical block 0
[   80.549472] ldm_validate_partition_table(): Disk read failed.
[   80.561469] sd 9:0:0:0: [sdc]  
[   80.561477] Result: hostbyte=0x00 driverbyte=0x08
[   80.561484] sd 9:0:0:0: [sdc]  
[   80.561487] Sense Key : 0x3 [current] 
[   80.561495] sd 9:0:0:0: [sdc]  
[   80.561499] ASC=0x14 ASCQ=0x0
[   80.561505] sd 9:0:0:0: [sdc] CDB: 
[   80.561508] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[   80.561525] end_request: critical medium error, dev sdc, sector 0
[   80.561533] Buffer I/O error on device sdc, logical block 0
[   80.561563]  sdc: unable to read partition table
[   80.566046] sd 9:0:0:0: [sdc] Unsupported sector size 774843904.
[   80.566061] sd 9:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[   80.566067] sd 9:0:0:0: [sdc] 774843904-byte physical blocks
[   80.566875] sd 9:0:0:0: [sdc] Attached SCSI disk
[  414.528126] usb 1-3: USB disconnect, device number 2
[  414.530807] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.530835] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.530845] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.530855] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.531360] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  414.531422] option 1-3:1.0: device disconnected
[  414.531703] huawei_cdc_ncm 1-3:1.1 wwan0: unregister 'huawei_cdc_ncm' usb-0000:00:1d.7-3, Huawei CDC NCM device
[  414.531802] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.536080] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.540299] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.540693] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  414.540740] option 1-3:1.2: device disconnected
[  414.541168] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  414.541945] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  414.541994] option 1-3:1.3: device disconnected
[  526.017404] usb 1-5: USB disconnect, device number 5
[  558.315189] usb 1-5: new high-speed USB device number 6 using ehci-pci
[  558.431525] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[  558.432804] scsi host10: usb-storage 1-5:1.0
[  559.436860] scsi 10:0:0:0: Direct-Access                                    PQ: 0 ANSI: 4
[  559.439227] sd 10:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[  559.439255] sd 10:0:0:0: [sdb] 1 512-byte logical blocks: (512 B/512 B)
[  559.439271] sd 10:0:0:0: [sdb] 0-byte physical blocks
[  559.439719] sd 10:0:0:0: [sdb] Write Protect is off
[  559.439738] sd 10:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  559.441507] sd 10:0:0:0: [sdb] Asking for cache data failed
[  559.441518] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[  559.443696] sd 10:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[  559.457444] sd 10:0:0:0: [sdb]  
[  559.457452] Result: hostbyte=0x00 driverbyte=0x08
[  559.457459] sd 10:0:0:0: [sdb]  
[  559.457462] Sense Key : 0x3 [current] 
[  559.457470] sd 10:0:0:0: [sdb]  
[  559.457474] ASC=0x14 ASCQ=0x0
[  559.457479] sd 10:0:0:0: [sdb] CDB: 
[  559.457483] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.457500] end_request: critical medium error, dev sdb, sector 0
[  559.457508] Buffer I/O error on device sdb, logical block 0
[  559.470430] sd 10:0:0:0: [sdb]  
[  559.470438] Result: hostbyte=0x00 driverbyte=0x08
[  559.470444] sd 10:0:0:0: [sdb]  
[  559.470448] Sense Key : 0x3 [current] 
[  559.470455] sd 10:0:0:0: [sdb]  
[  559.470459] ASC=0x14 ASCQ=0x0
[  559.470465] sd 10:0:0:0: [sdb] CDB: 
[  559.470468] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.470485] end_request: critical medium error, dev sdb, sector 0
[  559.470492] Buffer I/O error on device sdb, logical block 0
[  559.470521] ldm_validate_partition_table(): Disk read failed.
[  559.482431] sd 10:0:0:0: [sdb]  
[  559.482439] Result: hostbyte=0x00 driverbyte=0x08
[  559.482444] sd 10:0:0:0: [sdb]  
[  559.482448] Sense Key : 0x3 [current] 
[  559.482456] sd 10:0:0:0: [sdb]  
[  559.482459] ASC=0x14 ASCQ=0x0
[  559.482465] sd 10:0:0:0: [sdb] CDB: 
[  559.482468] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.482485] end_request: critical medium error, dev sdb, sector 0
[  559.482491] Buffer I/O error on device sdb, logical block 0
[  559.482521]  sdb: unable to read partition table
[  559.484979] sd 10:0:0:0: [sdb] Unsupported sector size 774843904.
[  559.484993] sd 10:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  559.484999] sd 10:0:0:0: [sdb] 774843904-byte physical blocks
[  559.486309] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 1191.941192] usb 1-3: new high-speed USB device number 7 using ehci-pci
[ 1192.058481] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 1192.062103] scsi host11: usb-storage 1-3:1.0
[ 1192.062939] usb-storage 1-3:1.1: USB Mass Storage device detected
[ 1192.063693] scsi host12: usb-storage 1-3:1.1
[ 1192.944828] usb 1-3: USB disconnect, device number 7
[ 1199.836196] usb 1-3: new high-speed USB device number 8 using ehci-pci
[ 1199.953980] option 1-3:1.0: GSM modem (1-port) converter detected
[ 1199.954647] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 1199.961590] huawei_cdc_ncm 1-3:1.1: MAC-Address: 58:2c:80:13:92:63
[ 1199.961603] huawei_cdc_ncm 1-3:1.1: setting rx_max = 16384
[ 1199.961836] huawei_cdc_ncm 1-3:1.1: setting tx_max = 16384
[ 1199.962395] huawei_cdc_ncm 1-3:1.1: cdc-wdm0: USB WDM device
[ 1199.963844] huawei_cdc_ncm 1-3:1.1 wwan0: register 'huawei_cdc_ncm' at usb-0000:00:1d.7-3, Huawei CDC NCM device, 58:2c:80:13:92:63
[ 1199.964157] option 1-3:1.2: GSM modem (1-port) converter detected
[ 1199.965506] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 1199.965932] option 1-3:1.3: GSM modem (1-port) converter detected
[ 1199.966546] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 1199.966931] usb-storage 1-3:1.4: USB Mass Storage device detected
[ 1199.967413] scsi host13: usb-storage 1-3:1.4
[ 1199.968165] usb-storage 1-3:1.5: USB Mass Storage device detected
[ 1199.968447] scsi host14: usb-storage 1-3:1.5
[ 1200.968943] scsi 13:0:0:0: CD-ROM                     Mass Storage     2.31 PQ: 0 ANSI: 2
[ 1200.970963] scsi 14:0:0:0: Direct-Access              SD Storage       2.31 PQ: 0 ANSI: 2
[ 1200.971778] sr 13:0:0:0: [sr1] scsi-1 drive
[ 1200.972935] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 1200.975678] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[ 1203.334001] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 1203.335452] ISOFS: changing to secondary root
sr0 и sr1 это я так думаю от usb-модема

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#7 by Blaze » 21 Jan 2015, 15:13

ramd, судя по логам, ошибка кроется в

Code: Select all

[    3.594046] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[    3.879399] REISERFS warning (device loop10): sh-2006 read_super_block: bread failed (dev loop10, block 16, size 4096)
[    4.003971] REISERFS warning (device loop18): sh-2006 read_super_block: bread failed (dev loop18, block 16, size 4096)
и в

Code: Select all

[  559.439227] sd 10:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[  559.439255] sd 10:0:0:0: [sdb] 1 512-byte logical blocks: (512 B/512 B)
[  559.439271] sd 10:0:0:0: [sdb] 0-byte physical blocks
[  559.439719] sd 10:0:0:0: [sdb] Write Protect is off
[  559.439738] sd 10:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  559.441507] sd 10:0:0:0: [sdb] Asking for cache data failed
[  559.441518] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[  559.443696] sd 10:0:0:0: [sdb] Sector size 0 reported, assuming 512.
[  559.457444] sd 10:0:0:0: [sdb] 
[  559.457452] Result: hostbyte=0x00 driverbyte=0x08
[  559.457459] sd 10:0:0:0: [sdb] 
[  559.457462] Sense Key : 0x3 [current]
[  559.457470] sd 10:0:0:0: [sdb] 
[  559.457474] ASC=0x14 ASCQ=0x0
[  559.457479] sd 10:0:0:0: [sdb] CDB:
[  559.457483] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.457500] end_request: critical medium error, dev sdb, sector 0
[  559.457508] Buffer I/O error on device sdb, logical block 0
[  559.470430] sd 10:0:0:0: [sdb] 
[  559.470438] Result: hostbyte=0x00 driverbyte=0x08
[  559.470444] sd 10:0:0:0: [sdb] 
[  559.470448] Sense Key : 0x3 [current]
[  559.470455] sd 10:0:0:0: [sdb] 
[  559.470459] ASC=0x14 ASCQ=0x0
[  559.470465] sd 10:0:0:0: [sdb] CDB:
[  559.470468] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.470485] end_request: critical medium error, dev sdb, sector 0
[  559.470492] Buffer I/O error on device sdb, logical block 0
[  559.470521] ldm_validate_partition_table(): Disk read failed.
[  559.482431] sd 10:0:0:0: [sdb] 
[  559.482439] Result: hostbyte=0x00 driverbyte=0x08
[  559.482444] sd 10:0:0:0: [sdb] 
[  559.482448] Sense Key : 0x3 [current]
[  559.482456] sd 10:0:0:0: [sdb] 
[  559.482459] ASC=0x14 ASCQ=0x0
[  559.482465] sd 10:0:0:0: [sdb] CDB:
[  559.482468] cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
[  559.482485] end_request: critical medium error, dev sdb, sector 0
[  559.482491] Buffer I/O error on device sdb, logical block 0
[  559.482521]  sdb: unable to read partition table
[  559.484979] sd 10:0:0:0: [sdb] Unsupported sector size 774843904.
[  559.484993] sd 10:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  559.484999] sd 10:0:0:0: [sdb] 774843904-byte physical blocks
[  559.486309] sd 10:0:0:0: [sdb] Attached SCSI removable disk
Porteus не может прочитать SD карту, об этом сообщаете данный кусок

Code: Select all

[  559.470485] end_request: critical medium error, dev sdb, sector 0
[  559.470492] Buffer I/O error on device sdb, logical block 0
[  559.470521] ldm_validate_partition_table(): Disk read failed.
Вам необходимо связаться с разработчиками и сообщить об этой ошибке.

Porteus can't read SD card - Disk read failed.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#8 by ramd » 21 Jan 2015, 15:50

Пожалуйста, уточните - с разработчиками портеуса видимо?

пс: только что на пуппирус-а проблема решилась установкой модуля firmware-any
я так понял, что это расширенный пакет драйверов, аж на 35мбайт :(
теперь вот думаю как определить, какой именно библиотеки не хватало,
может с ней отдельный маленький модуль получится сделать?

может есть что-то подобное (firmware) для портеуса?

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#9 by Blaze » 22 Jan 2015, 15:17

ramd, если дело в firmware, то распакуйте мой старый модуль dvb-v2.0-i486.xzm и возьмите от туда сборку firmware. Разработчикам написал.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#10 by ramd » 22 Jan 2015, 19:12

непомогло, но все равно спасибо. :beer:

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#11 by Blaze » 23 Jan 2015, 17:14

ramd wrote:проблема решилась установкой модуля firmware-any
Не могли бы Вы выложить ссылку на данный модуль?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#12 by ramd » 24 Jan 2015, 15:46

вот ссылка на модуль http://mirror.yandex.ru/puppyrus/puppyr ... -1-any.pfs

а вот из пуппи с подключенной и подмонтированной картой часть dmesg
начало отрезал чтоб влезло

Code: Select all

[    0.413065] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.413218] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.413237] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.413242] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.413247] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.413253] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.413291] pci_bus 0000:00: on NUMA node 0
[    0.475166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.475341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.475509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.475674] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.475840] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.476014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.476182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.476353] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.476944] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.477073] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.477307] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.477316] vgaarb: loaded
[    0.477318] vgaarb: bridge control possible 0000:00:02.0
[    0.477519] SCSI subsystem initialized
[    0.477544] libata version 3.00 loaded.
[    0.477544] ACPI: bus type USB registered
[    0.477544] usbcore: registered new interface driver usbfs
[    0.477544] usbcore: registered new interface driver hub
[    0.477544] usbcore: registered new device driver usb
[    0.478050] PCI: Using ACPI for IRQ routing
[    0.488178] PCI: pci_cache_line_size set to 64 bytes
[    0.488264] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.488271] e820: reserve RAM buffer [mem 0x3f494000-0x3fffffff]
[    0.488277] e820: reserve RAM buffer [mem 0x3f578000-0x3fffffff]
[    0.488281] e820: reserve RAM buffer [mem 0x3f5ed000-0x3fffffff]
[    0.488284] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.488617] NetLabel: Initializing
[    0.488620] NetLabel:  domain hash size = 128
[    0.488621] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.488650] NetLabel:  unlabeled traffic allowed by default
[    0.488764] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.488773] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.488783] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.490069] Switched to clocksource hpet
[    0.490213] pnp: PnP ACPI init
[    0.490246] ACPI: bus type PNP registered
[    0.553500] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.553510] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.553516] system 00:00: [io  0x0610] has been reserved
[    0.553521] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.553527] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.553533] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.553539] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.553545] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.553557] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.553563] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.553569] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.553576] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.553582] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.553588] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.553594] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.553602] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.553632] pnp 00:01: [dma 4]
[    0.553707] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.553833] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.554094] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.554200] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.554292] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.554445] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.554622] pnp 00:07: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.554928] pnp: PnP ACPI: found 8 devices
[    0.554931] ACPI: bus type PNP unregistered
[    0.596107] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.596116] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.596127] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.596136] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.596147] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.596154] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.596163] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.596172] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.596183] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.596204] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.596210] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.596215] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.596220] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.596225] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.596230] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.596235] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.596240] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.596245] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.596251] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.596256] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.596261] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.596266] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.596271] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.596344] NET: Registered protocol family 2
[    0.596797] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.596838] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.596893] TCP: Hash tables configured (established 8192 bind 8192)
[    0.596937] TCP: reno registered
[    0.596943] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.596959] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.597131] NET: Registered protocol family 1
[    0.597333] RPC: Registered named UNIX socket transport module.
[    0.597337] RPC: Registered udp transport module.
[    0.597339] RPC: Registered tcp transport module.
[    0.597341] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.597361] pci 0000:00:02.0: Boot video device
[    0.599681] PCI: CLS 64 bytes, default 64
[    0.599820] Trying to unpack rootfs image as initramfs...
[    0.817766] Freeing initrd memory: 700K (f7b4f000 - f7bfe000)
[    0.817880] Simple Boot Flag at 0x44 set to 0x1
[    0.819446] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.820042] bounce pool size: 64 pages
[    0.826240] zbud: loaded
[    0.827905] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.828591] NFS: Registering the id_resolver key type
[    0.828618] Key type id_resolver registered
[    0.828620] Key type id_legacy registered
[    0.828641] NTFS driver 2.1.30 [Flags: R/W].
[    0.828984] fuse init (API version 7.22)
[    0.829933] aufs 3.14-20140714
[    0.829944] msgmni has been set to 1751
[    0.830892] async_tx: api initialized (async)
[    0.831070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.831130] io scheduler noop registered
[    0.831135] io scheduler deadline registered
[    0.831154] io scheduler bfq registered (default)
[    0.831156] BFQ I/O-scheduler version: v7r4
[    0.831668] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.832100] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.832474] intel_idle: MWAIT substates: 0x20220
[    0.832487] intel_idle: v0.4 model 0x1C
[    0.832490] intel_idle: lapic_timer_reliable_states 0x2
[    0.832499] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.832777] GHES: HEST is not enabled!
[    0.876814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.878384] Non-volatile memory driver v1.3
[    0.883690] brd: module loaded
[    0.900935] loop: module loaded
[    0.900941] mtip32xx Version 1.3.1
[    0.901426] zram: Created 1 device(s) ...
[    0.901873] ahci 0000:00:1f.2: version 3.0
[    0.902260] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.902323] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.902372] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.902380] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    0.904111] scsi0 : ahci
[    0.904402] scsi1 : ahci
[    0.904651] scsi2 : ahci
[    0.904898] scsi3 : ahci
[    0.905102] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 42
[    0.905109] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 42
[    0.905111] ata3: DUMMY
[    0.905114] ata4: DUMMY
[    0.908154] libphy: Fixed MDIO Bus: probed
[    0.908158] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.908161] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.908440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.908443] ehci-pci: EHCI PCI platform driver
[    0.908768] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.908906] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.908932] ehci-pci 0000:00:1d.7: debug port 1
[    0.912849] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.912893] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58204400
[    0.918061] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.918208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.918214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.918219] usb usb1: Product: EHCI Host Controller
[    0.918223] usb usb1: Manufacturer: Linux 3.14.17-pf4 ehci_hcd
[    0.918228] usb usb1: SerialNumber: 0000:00:1d.7
[    0.918619] hub 1-0:1.0: USB hub found
[    0.918641] hub 1-0:1.0: 8 ports detected
[    0.919515] ehci-platform: EHCI generic platform driver
[    0.919548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.919565] ohci-pci: OHCI PCI platform driver
[    0.919609] ohci-platform: OHCI generic platform driver
[    0.919635] uhci_hcd: USB Universal Host Controller Interface driver
[    0.919915] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.920100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.920147] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[    0.920301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.920308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.920312] usb usb2: Product: UHCI Host Controller
[    0.920317] usb usb2: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.920321] usb usb2: SerialNumber: 0000:00:1d.0
[    0.920690] hub 2-0:1.0: USB hub found
[    0.920711] hub 2-0:1.0: 2 ports detected
[    0.921260] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.921397] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.921464] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[    0.921614] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.921621] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.921626] usb usb3: Product: UHCI Host Controller
[    0.921630] usb usb3: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.921634] usb usb3: SerialNumber: 0000:00:1d.1
[    0.921989] hub 3-0:1.0: USB hub found
[    0.922032] hub 3-0:1.0: 2 ports detected
[    0.922566] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.922697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.922760] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[    0.922905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.922911] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.922915] usb usb4: Product: UHCI Host Controller
[    0.922919] usb usb4: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.922924] usb usb4: SerialNumber: 0000:00:1d.2
[    0.923326] hub 4-0:1.0: USB hub found
[    0.923346] hub 4-0:1.0: 2 ports detected
[    0.923932] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.924087] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.924152] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[    0.924302] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.924309] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.924313] usb usb5: Product: UHCI Host Controller
[    0.924318] usb usb5: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.924322] usb usb5: SerialNumber: 0000:00:1d.3
[    0.924697] hub 5-0:1.0: USB hub found
[    0.924717] hub 5-0:1.0: 2 ports detected
[    0.925284] usbcore: registered new interface driver usb-storage
[    0.925315] usbcore: registered new interface driver ums_eneub6250
[    0.925354] usbcore: registered new interface driver ums-realtek
[    0.925462] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.939922] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.939934] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.940221] mousedev: PS/2 mouse device common for all mice
[    0.940448] md: linear personality registered for level -1
[    0.940453] md: raid0 personality registered for level 0
[    0.940457] md: raid1 personality registered for level 1
[    0.940460] md: raid10 personality registered for level 10
[    0.940579] md: raid6 personality registered for level 6
[    0.940582] md: raid5 personality registered for level 5
[    0.940585] md: raid4 personality registered for level 4
[    0.940829] device-mapper: uevent: version 1.0.3
[    0.941100] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.941279] device-mapper: multipath: version 1.6.0 loaded
[    0.941284] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.941288] device-mapper: multipath queue-length: version 0.1.0 loaded
[    0.941291] device-mapper: multipath service-time: version 0.2.0 loaded
[    0.941445] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    0.941449] device-mapper: raid: Loading target version 1.5.2
[    0.941583] device-mapper: cache-policy-mq: version 1.2.0 loaded
[    0.941586] device-mapper: cache cleaner: version 1.0.0 loaded
[    0.941593] ledtrig-cpu: registered to indicate activity on CPUs
[    0.941646] hidraw: raw HID events driver (C) Jiri Kosina
[    0.941819] usbcore: registered new interface driver usbhid
[    0.941821] usbhid: USB HID core driver
[    0.942132] Netfilter messages via NETLINK v0.30.
[    0.942267] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.942344] NET: Registered protocol family 17
[    0.942409] Key type dns_resolver registered
[    0.942511] Using IPI No-Shortcut mode
[    0.942527] TuxOnIce 3.3 (http://tuxonice.net)
[    0.955016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.071272] UKSM: relative memcmp_cost = 286 hash=1243499097 cmp_ret=0.
[    1.076222] regulator-dummy: disabling
[    1.076557] TuxOnIce: Ignoring late initcall, as requested.
[    1.221127] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    1.365061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.365679] ata1.00: unexpected _GTF length (4)
[    1.365869] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.365876] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.366543] ata1.00: unexpected _GTF length (4)
[    1.366700] ata1.00: configured for UDMA/133
[    1.366978] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
[    1.367463] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.367469] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.367571] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.367637] sd 0:0:0:0: [sda] Write Protect is off
[    1.367648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.367721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.390947]  sda: sda1 sda2 sda3 sda4
[    1.391967] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.438365] usb 1-4: New USB device found, idVendor=0402, idProduct=7670
[    1.438371] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.438376] usb 1-4: Product: WebCam
[    1.438380] usb 1-4: Manufacturer: Lite-On
[    1.674124] ata2: SATA link down (SStatus 0 SControl 300)
[    1.674526] Freeing unused kernel memory: 452K (c15e5000 - c1656000)
[    1.674606] Write protecting the kernel text: 4536k
[    1.674682] Write protecting the kernel read-only data: 1148k
[    1.674690] NX-protecting the kernel data: 3656k
[    1.674838] BFS CPU scheduler v0.447 by Con Kolivas.
[    2.026699] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528321
[    2.086638] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.088403] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.130931] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.321161] random: nonblocking pool is initialized
[    2.851363] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.894089] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.772164] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[    6.772693] systemd[1]: Detected architecture 'x86'.
[    6.997675] NET: Registered protocol family 10
[    6.998299] systemd[1]: Inserted module 'ipv6'
[    7.027892] systemd[1]: Set hostname to <pra>.
[    7.406698] systemd[1]: Unit mnt-sda4.mount is bound to inactive service. Stopping, too.
[    7.406808] systemd[1]: Unit mnt-sda3.mount is bound to inactive service. Stopping, too.
[    7.406877] systemd[1]: Unit mnt-sda2.mount is bound to inactive service. Stopping, too.
[    7.406943] systemd[1]: Unit mnt-sda1.mount is bound to inactive service. Stopping, too.
[    7.410560] systemd[1]: Cannot add dependency xlogin@live.service1 to graphical.target, ignoring: Invalid argument
[    7.442713] systemd[1]: Cannot add dependency getty@tty1.service0 to getty.target, ignoring: Invalid argument
[    7.476814] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.477225] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.477278] systemd[1]: Starting Remote File Systems.
[    7.477833] systemd[1]: Reached target Remote File Systems.
[    7.477943] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.478269] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.478312] systemd[1]: Starting Paths.
[    7.478725] systemd[1]: Reached target Paths.
[    7.478844] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.479685] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.479744] systemd[1]: Starting Encrypted Volumes.
[    7.480173] systemd[1]: Reached target Encrypted Volumes.
[    7.480215] systemd[1]: Starting Swap.
[    7.480610] systemd[1]: Reached target Swap.
[    7.480655] systemd[1]: Expecting device dev-sda1.device...
[    7.480965] systemd[1]: Expecting device dev-sda2.device...
[    7.481305] systemd[1]: Expecting device dev-sda3.device...
[    7.481614] systemd[1]: Expecting device dev-sda4.device...
[    7.481920] systemd[1]: Starting Root Slice.
[    7.517391] systemd[1]: Created slice Root Slice.
[    7.517448] systemd[1]: Starting User and Session Slice.
[    7.518512] systemd[1]: Created slice User and Session Slice.
[    7.518563] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.519236] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.519285] systemd[1]: Starting Delayed Shutdown Socket.
[    7.519805] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.519853] systemd[1]: Starting Journal Socket (/dev/log).
[    7.520556] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.520649] systemd[1]: Starting udev Control Socket.
[    7.521211] systemd[1]: Listening on udev Control Socket.
[    7.521303] systemd[1]: Starting udev Kernel Socket.
[    7.521754] systemd[1]: Listening on udev Kernel Socket.
[    7.521833] systemd[1]: Starting Journal Socket.
[    7.522460] systemd[1]: Listening on Journal Socket.
[    7.522571] systemd[1]: Starting System Slice.
[    7.523685] systemd[1]: Created slice System Slice.
[    7.523770] systemd[1]: Starting system-getty.slice.
[    7.524966] systemd[1]: Created slice system-getty.slice.
[    7.525110] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.527270] systemd[1]: Mounted Huge Pages File System.
[    7.527393] systemd[1]: Mounting POSIX Message Queue File System...
[    7.531480] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.534904] systemd[1]: Mounting Debug File System...
[    7.630796] systemd[1]: Started Set Up Additional Binary Formats.
[    7.724590] systemd[1]: Started Load Kernel Modules.
[    7.724712] systemd[1]: Mounting FUSE Control File System...
[    7.733761] systemd[1]: Mounted Configuration File System.
[    7.733906] systemd[1]: Starting Apply Kernel Variables...
[    7.745801] systemd[1]: Starting udev Coldplug all Devices...
[    7.758254] systemd[1]: Starting Setup Virtual Console...
[    7.761597] systemd[1]: Starting Journal Service...
[    7.823641] systemd[1]: Starting Slices.
[    7.825092] systemd[1]: Reached target Slices.
[    7.971860] systemd[1]: Mounting Temporary Directory...
[    8.045681] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.149763] systemd[1]: Started Apply Kernel Variables.
[    8.231534] systemd[1]: Mounted POSIX Message Queue File System.
[    8.233084] systemd[1]: Started Remount Root and Kernel File Systems.
[    8.234061] systemd[1]: Mounted Debug File System.
[    8.234973] systemd[1]: Mounted FUSE Control File System.
[    8.235938] systemd[1]: Mounted Temporary Directory.
[    8.341845] systemd[1]: Starting Rebuild Dynamic Linker Cache...
[    8.345659] systemd[1]: Started First Boot Wizard.
[    8.345750] systemd[1]: Starting Load/Save Random Seed...
[    8.349774] systemd[1]: Starting Create System Users...
[    8.731815] systemd[1]: Starting Rebuild Hardware Database...
[    8.739240] systemd[1]: Started udev Coldplug all Devices.
[    8.740804] systemd[1]: Started Load/Save Random Seed.
[    9.009671] systemd[1]: Started Journal Service.
[    9.249312] systemd-journald[855]: Received request to flush runtime journal from PID 1
[   11.824671] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   11.824686] ACPI: Power Button [PWRB]
[   11.824963] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   11.824972] ACPI: Sleep Button [SLPB]
[   11.825284] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.825357] ACPI: Lid Switch [LID0]
[   11.825664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   11.825673] ACPI: Power Button [PWRF]
[   11.893974] wmi: Mapper loaded
[   11.911147] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   11.973155] ACPI: AC Adapter [AC] (on-line)
[   12.057620] rtc_cmos 00:02: RTC can wake from S4
[   12.057996] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   12.058929] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[   12.125889] thermal LNXTHERM:00: registered as thermal_zone0
[   12.125895] ACPI: Thermal Zone [THRM] (46 C)
[   12.151501] ACPI: Fan [FAN] (on)
[   12.162834] Linux agpgart interface v0.103
[   12.234481] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[   12.234556] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   12.234662] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   12.235084] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[   12.428926] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMBA) (20131218/utaddress-258)
[   12.428947] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.428954] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000053e (\GPIO) (20131218/utaddress-258)
[   12.428968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.428972] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000053e (\GPIO) (20131218/utaddress-258)
[   12.428985] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.428988] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.522063] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[   12.757164] cfg80211: Calling CRDA to update world regulatory domain
[   12.849925] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[   12.902052] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   12.902077] ACPI: Battery Slot [BAT0] (battery present)
[   12.968976] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[   12.970425] media: Linux media interface: v0.10
[   12.994586] [drm] Initialized drm 1.1.0 20060810
[   13.033140] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.052149] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   13.133885] Linux video capture interface: v2.00
[   13.699282] [drm] Memory usable by graphics device = 512M
[   13.706135] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   13.706162] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.706166] [drm] Driver supports precise vblank timestamp query.
[   13.706328] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.732039] [drm] initialized overlay support
[   13.821390] fbcon: inteldrmfb (fb0) is primary device
[   13.901189] uvcvideo: Found UVC 1.00 device WebCam (0402:7670)
[   13.904380] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[   13.904659] usbcore: registered new interface driver uvcvideo
[   13.904660] USB Video Class driver (1.1.1)
[   13.965990] ath: phy0: Enable LNA combining
[   13.967553] ath: EEPROM regdomain: 0x8283
[   13.967555] ath: EEPROM indicates we should expect a country code
[   13.967559] ath: doing EEPROM country->regdmn map search
[   13.967562] ath: country maps to regdmn code: 0x3
[   13.967564] ath: Country alpha2 being used: RU
[   13.967566] ath: Regpair used: 0x3
[   13.970154] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.971238] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xfa560000, irq=17
[   14.497096] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[   14.505366] Console: switching to colour frame buffer device 100x37
[   14.513797] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.513803] i915 0000:00:02.0: registered panic notifier
[   14.543857] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   14.890188] acpi device:28: registered as cooling_device3
[   14.890545] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   14.890804] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.891892] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.902073] acer_wmi: Acer Laptop ACPI-WMI Extras
[   15.033213] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   15.038056] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.045477] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.057128] acer_wmi: Function bitmap for Communication Device: 0x1
[   15.057144] acer_wmi: Brightness must be controlled by acpi video driver
[   15.057889] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[   22.658658] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[   22.670350] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   22.768777] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.377774] aufs may_rename_srcdir:469:mv[1139]: renaming dir who has child(ren) on multiple branches, is not supported
[   44.953187] usb 1-5: new high-speed USB device number 3 using ehci-pci
[   45.068660] usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
[   45.068672] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[   45.068680] usb 1-5: Product: UB6250       
[   45.068687] usb 1-5: Manufacturer: ENE Flash  
[   45.068694] usb 1-5: SerialNumber: 606569746801
[   45.073117] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[   45.073406] scsi4 : usb-storage 1-5:1.0
[   45.073899] usb-storage: waiting for device to settle before scanning
[   49.088054] usb-storage: device found at 3
[   49.088153] usb-storage: device scan complete
[   49.570949] scsi scan: INQUIRY result too short (5), using 36
[   49.570963] scsi 4:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0
[   49.581557] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   49.583235] sd 4:0:0:0: [sdb] 4022272 512-byte logical blocks: (2.05 GB/1.91 GiB)
[   49.583350] sd 4:0:0:0: [sdb] Write Protect is off
[   49.583364] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[   49.583456] sd 4:0:0:0: [sdb] No Caching mode page found
[   49.583467] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   49.585188] sd 4:0:0:0: [sdb] No Caching mode page found
[   49.585202] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   49.596862]  sdb: sdb1
[   49.597720] sd 4:0:0:0: [sdb] No Caching mode page found
[   49.597729] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   49.597737] sd 4:0:0:0: [sdb] Attached SCSI disk
[   69.839572] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   69.842725] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  846.965090] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  847.080075] usb 1-3: New USB device found, idVendor=12d1, idProduct=155b
[  847.080086] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  847.080093] usb 1-3: Product: Mobile Connect
[  847.080098] usb 1-3: Manufacturer:       
[  847.082056] usb-storage 1-3:1.0: USB Mass Storage device detected
[  847.083880] scsi5 : usb-storage 1-3:1.0
[  847.084233] usb-storage: waiting for device to settle before scanning
[  847.084598] usb-storage 1-3:1.1: USB Mass Storage device detected
[  847.084771] scsi6 : usb-storage 1-3:1.1
[  847.085100] usb-storage: waiting for device to settle before scanning
[  847.896801] usb 1-3: USB disconnect, device number 4
[  854.787145] usb 1-3: new high-speed USB device number 5 using ehci-pci
[  854.902327] usb 1-3: New USB device found, idVendor=12d1, idProduct=1506
[  854.902352] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[  854.902360] usb 1-3: Product: Mobile Connect
[  854.902367] usb 1-3: Manufacturer:       
[  854.905791] usb-storage 1-3:1.4: USB Mass Storage device detected
[  854.911473] scsi7 : usb-storage 1-3:1.4
[  854.911788] usb-storage: waiting for device to settle before scanning
[  854.912191] usb-storage 1-3:1.5: USB Mass Storage device detected
[  854.912425] scsi8 : usb-storage 1-3:1.5
[  854.912715] usb-storage: waiting for device to settle before scanning
[  855.041423] usbcore: registered new interface driver usbserial
[  855.042928] usbcore: registered new interface driver usbserial_generic
[  855.043130] usbserial: USB Serial support registered for generic
[  855.081481] usbcore: registered new interface driver cdc_ncm
[  855.104105] usbcore: registered new interface driver option
[  855.104195] usbserial: USB Serial support registered for GSM modem (1-port)
[  855.104576] option 1-3:1.0: GSM modem (1-port) converter detected
[  855.104901] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[  855.105068] option 1-3:1.2: GSM modem (1-port) converter detected
[  855.105391] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[  855.105483] option 1-3:1.3: GSM modem (1-port) converter detected
[  855.105784] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[  855.183184] usbcore: registered new interface driver cdc_wdm
[  855.187198] huawei_cdc_ncm 1-3:1.1: MAC-Address: 58:2c:80:13:92:63
[  855.189366] huawei_cdc_ncm 1-3:1.1: cdc-wdm0: USB WDM device
[  855.190870] huawei_cdc_ncm 1-3:1.1 wwan0: register 'huawei_cdc_ncm' at usb-0000:00:1d.7-3, Huawei CDC NCM device, 58:2c:80:13:92:63
[  855.192175] usbcore: registered new interface driver huawei_cdc_ncm
[  855.412568] usb 1-3: USB disconnect, device number 5
[  855.413259] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  855.413359] option 1-3:1.0: device disconnected
[  855.413712] huawei_cdc_ncm 1-3:1.1 wwp0s29f7u3i1: unregister 'huawei_cdc_ncm' usb-0000:00:1d.7-3, Huawei CDC NCM device
[  855.416344] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.416361] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.420593] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.420836] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.424840] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.425088] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.429077] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.429336] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  855.502877] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  855.502934] option 1-3:1.2: device disconnected
[  855.504435] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  855.504675] option 1-3:1.3: device disconnected
[  862.404167] usb 1-3: new high-speed USB device number 6 using ehci-pci
[  862.519454] usb 1-3: New USB device found, idVendor=12d1, idProduct=1506
[  862.519466] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[  862.519474] usb 1-3: Product: Mobile Connect
[  862.519481] usb 1-3: Manufacturer:       
[  862.521712] option 1-3:1.0: GSM modem (1-port) converter detected
[  862.522136] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[  862.525172] huawei_cdc_ncm 1-3:1.1: MAC-Address: 58:2c:80:13:92:63
[  862.526250] huawei_cdc_ncm 1-3:1.1: cdc-wdm0: USB WDM device
[  862.527196] huawei_cdc_ncm 1-3:1.1 wwan0: register 'huawei_cdc_ncm' at usb-0000:00:1d.7-3, Huawei CDC NCM device, 58:2c:80:13:92:63
[  862.528173] option 1-3:1.2: GSM modem (1-port) converter detected
[  862.528560] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[  862.529076] option 1-3:1.3: GSM modem (1-port) converter detected
[  862.529451] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[  862.529920] usb-storage 1-3:1.4: USB Mass Storage device detected
[  862.531923] scsi9 : usb-storage 1-3:1.4
[  862.532293] usb-storage: waiting for device to settle before scanning
[  862.532590] usb-storage 1-3:1.5: USB Mass Storage device detected
[  862.532747] scsi10 : usb-storage 1-3:1.5
[  862.532998] usb-storage: waiting for device to settle before scanning
[  862.533381] usb 1-5: USB disconnect, device number 3
[  863.740708] option1 ttyUSB0: option_instat_callback: error -2
[  866.172397] option1 ttyUSB0: option_instat_callback: error -2
[  866.544049] usb-storage: device found at 6
[  866.544068] usb-storage: device found at 6
[  866.544336] usb-storage: device scan complete
[  866.544692] usb-storage: device scan complete
[  866.544993] scsi 9:0:0:0: CD-ROM                     Mass Storage     2.31 PQ: 0 ANSI: 2
[  866.545434] scsi 10:0:0:0: Direct-Access              SD Storage       2.31 PQ: 0 ANSI: 2
[  866.551868] sr0: scsi-1 drive
[  866.551876] cdrom: Uniform CD-ROM driver Revision: 3.20
[  866.553603] sr 9:0:0:0: Attached scsi CD-ROM sr0
[  866.553947] sr 9:0:0:0: Attached scsi generic sg1 type 5
[  866.556854] sd 10:0:0:0: Attached scsi generic sg2 type 0
[  866.558913] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[  867.581251] ISO 9660 Extensions: Microsoft Joliet Level 1
[  867.582514] ISOFS: changing to secondary root
[  880.376841] PPP generic driver version 2.4.2
[  880.498797] PPP BSD Compression module registered
[  880.511096] PPP Deflate Compression module registered
[ 4526.451132] usb 1-5: new high-speed USB device number 7 using ehci-pci
[ 4526.566730] usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
[ 4526.566742] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4526.566750] usb 1-5: Product: UB6250       
[ 4526.566757] usb 1-5: Manufacturer: ENE Flash  
[ 4526.566764] usb 1-5: SerialNumber: 606569746801
[ 4526.567844] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[ 4526.568124] scsi11 : usb-storage 1-5:1.0
[ 4526.568612] usb-storage: waiting for device to settle before scanning
[ 4530.576077] usb-storage: device found at 7
[ 4530.576240] usb-storage: device scan complete
[ 4531.000143] scsi 11:0:0:0: Direct-Access       M                            PQ: 0 ANSI: 0
[ 4531.005089] sd 11:0:0:0: [sdd] 4022272 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 4531.005145] sd 11:0:0:0: [sdd] Write Protect is off
[ 4531.005153] sd 11:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[ 4531.005192] sd 11:0:0:0: Attached scsi generic sg3 type 0
[ 4531.005206] sd 11:0:0:0: [sdd] No Caching mode page found
[ 4531.005212] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[ 4531.005873] sd 11:0:0:0: [sdd] No Caching mode page found
[ 4531.005882] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[ 4531.017149]  sdd: sdd1
[ 4531.017995] sd 11:0:0:0: [sdd] No Caching mode page found
[ 4531.018037] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[ 4531.018046] sd 11:0:0:0: [sdd] Attached SCSI disk
[ 4535.944114] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4535.947793] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4537.117325] FAT-fs (sdb1): Directory bread(block 7880) failed
[ 4537.117339] FAT-fs (sdb1): Directory bread(block 7881) failed
[ 4537.117348] FAT-fs (sdb1): Directory bread(block 7882) failed
[ 4537.117355] FAT-fs (sdb1): Directory bread(block 7883) failed
[ 4537.117361] FAT-fs (sdb1): Directory bread(block 7884) failed
[ 4537.117367] FAT-fs (sdb1): Directory bread(block 7885) failed
[ 4537.117374] FAT-fs (sdb1): Directory bread(block 7886) failed
[ 4537.117380] FAT-fs (sdb1): Directory bread(block 7887) failed

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#13 by ramd » 24 Jan 2015, 16:25

пардон, там в коде много лишнего т.к. сделано с сохраненкой из модуля.
перезагружусь начисто и сделаю снова чуть позже.
так-же могу сделать dmesg из слакса, где карта тоже работает ок.

User avatar
Blaze
DEV Team
DEV Team
Posts: 3908
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Не монтируется SD карта от фотоаппарата

Post#14 by Blaze » 24 Jan 2015, 16:56

Неплохо в Пуппи или Slax предварительно в GParted отформатировать раздел SD карты.

Затем в Пуппи или Slax, в консоле, выполните команды

Code: Select all

fsck /dev/sda1
e2fsck -y /dev/sda1
возможно монтируется по другому, тогда еще в придачу

Code: Select all

fsck /mnt/sda1
e2fsck -y /mnt/sda1
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

ramd
White ninja
White ninja
Posts: 24
Joined: 20 Jan 2015, 09:22
Distribution: porteus 3.1
Location: Russia, Рязань

Re: Не монтируется SD карта от фотоаппарата

Post#15 by ramd » 24 Jan 2015, 18:30

Форматнуть конечно можно, но как быть с чужими СДшками, с которых надо слить фотки?
Не понял, почему fsck -- sda1, если карта у меня монтироуется в sdb или sdc

dmesg - pra

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.14.17-pf4 (root@puppyrus) (gcc version 4.7.2 (GCC) ) #2 SMP PREEMPT Mon Aug 18 11:18:45 Universal 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f493fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f494000-0x000000003f4befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f4bf000-0x000000003f577fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f578000-0x000000003f5befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f5ecfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5ed000-0x000000003f5fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5ff000-0x000000003f5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f600000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer AO532h/AO532h, BIOS V1.25 06/15/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask 0FFF00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x016bf000, 0x016bffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3f3d5000-0x3f483fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37b4f000-0x37bfd4db]
[    0.000000] Move RAMDISK from [mem 0x3f3d5000-0x3f4834db] to [mem 0x37b4f000-0x37bfd4db]
[    0.000000] ACPI: RSDP 000fe020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 3f5fe120 000064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 3f5fd000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 3f5f2000 007B21 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 3f586000 000040
[    0.000000] ACPI: HPET 3f5fc000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 3f5fb000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 3f5fa000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 3f5f1000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 3f5f0000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 3f5ee000 0004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 3f5ed000 000194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 122MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x016c0000, 0x016c0fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f493fff]
[    0.000000]   node   0: [mem 0x3f4bf000-0x3f577fff]
[    0.000000]   node   0: [mem 0x3f5bf000-0x3f5ecfff]
[    0.000000]   node   0: [mem 0x3f5ff000-0x3f5fffff]
[    0.000000] On node 0 totalpages: 259354
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 245 pages used for memmap
[    0.000000]   HighMem zone: 31102 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f7319000 s25024 r0 d24128 u49152
[    0.000000] pcpu-alloc: s25024 r0 d24128 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257570
[    0.000000] Kernel command line: "video=800x600" dir=pra1501m copy2ram noswap pmedia=usbflash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f600)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1020520K/1037416K available (4535K kernel code, 351K rwdata, 1144K rodata, 452K init, 344K bss, 16896K reserved, 124408K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc15e5000 - 0xc1656000   ( 452 kB)
      .data : 0xc146df2b - 0xc15e4ec0   (1499 kB)
      .text : 0xc1000000 - 0xc146df2b   (4535 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.585 MHz processor
[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.17 BogoMIPS (lpj=1662585)
[    0.001013] pid_max: default: 32768 minimum: 301
[    0.001036] ACPI: Core revision 20131218
[    0.011830] ACPI: All ACPI Tables successfully acquired
[    0.012061] Security Framework initialized
[    0.012087] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012092] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012509] Initializing cgroup subsys memory
[    0.012522] Initializing cgroup subsys devices
[    0.012525] Initializing cgroup subsys freezer
[    0.012528] Initializing cgroup subsys net_cls
[    0.012532] Initializing cgroup subsys blkio
[    0.012535] Initializing cgroup subsys bfqio
[    0.012538] Initializing cgroup subsys perf_event
[    0.012566] Disabled fast string operations
[    0.012572] CPU: Physical Processor ID: 0
[    0.012574] CPU: Processor Core ID: 0
[    0.012592] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[    0.012729] Freeing SMP alternatives memory: 16K (c1656000 - c165a000)
[    0.013022] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.013507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023524] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
[    0.024000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.024000] ... version:                3
[    0.024000] ... bit width:              40
[    0.024000] ... generic registers:      2
[    0.024000] ... value mask:             000000ffffffffff
[    0.024000] ... max period:             000000007fffffff
[    0.024000] ... fixed-purpose events:   3
[    0.024000] ... event mask:             0000000700000003
[    0.027118] CPU 1 irqstacks, hard=f6cba000 soft=f6cbc000
[    0.027122] x86: Booting SMP configuration:
[    0.027124] .... node  #0, CPUs:      #1
[    0.025153] Initializing CPU#1
[    0.025153] Disabled fast string operations
[    0.039089] x86: Booted up 1 node, 2 CPUs
[    0.039096] smpboot: Total of 2 processors activated (6650.34 BogoMIPS)
[    0.040010] devtmpfs: initialized
[    0.040606] PM: Registering ACPI NVS region [mem 0x3f578000-0x3f5befff] (290816 bytes)
[    0.040606] xor: measuring software checksum speed
[    0.050005]    pIII_sse  :  5156.000 MB/sec
[    0.060005]    prefetch64-sse:  5740.000 MB/sec
[    0.060008] xor: using function: prefetch64-sse (5740.000 MB/sec)
[    0.060195] regulator-dummy: no parameters
[    0.060340] NET: Registered protocol family 16
[    0.060691] cpuidle: using governor ladder
[    0.060694] cpuidle: using governor menu
[    0.060806] ACPI: bus type PCI registered
[    0.061012] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.061018] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.061020] PCI: Using MMCONFIG for extended config space
[    0.061023] PCI: Using configuration type 1 for base access
[    0.067267] bio: create slab <bio-0> at 0
[    0.084163] raid6: mmxx1      382 MB/s
[    0.101040] raid6: mmxx2      742 MB/s
[    0.118071] raid6: sse1x1     308 MB/s
[    0.135014] raid6: sse1x2     574 MB/s
[    0.152010] raid6: sse2x1     613 MB/s
[    0.169039] raid6: sse2x2    1144 MB/s
[    0.169042] raid6: using algorithm sse2x2 (1144 MB/s)
[    0.169045] raid6: using ssse3x1 recovery algorithm
[    0.169163] ACPI: Added _OSI(Module Device)
[    0.169167] ACPI: Added _OSI(Processor Device)
[    0.169170] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.169173] ACPI: Added _OSI(Processor Aggregator Device)
[    0.175472] ACPI: Executed 1 blocks of module-level executable AML code
[    0.179306] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.180125] ACPI: SSDT 3f4b7c90 0001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.180879] ACPI: Dynamic OEM Table Load:
[    0.180884] ACPI: SSDT   (null) 0001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.181122] ACPI: SSDT 3f4b6e10 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.181834] ACPI: Dynamic OEM Table Load:
[    0.181839] ACPI: SSDT   (null) 0001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.187535] ACPI: SSDT 3f4b7f10 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.188275] ACPI: Dynamic OEM Table Load:
[    0.188280] ACPI: SSDT   (null) 0000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.188480] ACPI: SSDT 3f4b5f10 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.189200] ACPI: Dynamic OEM Table Load:
[    0.189206] ACPI: SSDT   (null) 000083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.196139] ACPI: Interpreter enabled
[    0.196155] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.196168] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.196205] ACPI: (supports S0 S3 S4 S5)
[    0.196209] ACPI: Using IOAPIC for interrupt routing
[    0.196292] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.196607] ACPI: No dock devices found.
[    0.398201] ACPI: Power Resource [FN00] (on)
[    0.399950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.399963] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.399975] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131218/nsarguments-189)
[    0.400131] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.400134] _OSC request data:1 1f 0 
[    0.400144] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[    0.401872] PCI host bridge to bus 0000:00
[    0.401881] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.401887] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.401892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.401897] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.401902] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.401922] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.402164] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.402181] pci 0000:00:02.0: reg 0x10: [mem 0x58180000-0x581fffff]
[    0.402190] pci 0000:00:02.0: reg 0x14: [io  0x60c0-0x60c7]
[    0.402200] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[    0.402210] pci 0000:00:02.0: reg 0x1c: [mem 0x58000000-0x580fffff]
[    0.402430] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.402444] pci 0000:00:02.1: reg 0x10: [mem 0x58100000-0x5817ffff]
[    0.402723] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.402755] pci 0000:00:1b.0: reg 0x10: [mem 0x58200000-0x58203fff 64bit]
[    0.402895] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.403009] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.403152] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.403298] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.403404] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.403550] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.403695] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.403800] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.403949] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.404029] pci 0000:00:1d.0: reg 0x20: [io  0x6080-0x609f]
[    0.404205] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.404352] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.404424] pci 0000:00:1d.1: reg 0x20: [io  0x6060-0x607f]
[    0.404592] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.404728] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.404800] pci 0000:00:1d.2: reg 0x20: [io  0x6040-0x605f]
[    0.404924] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.405074] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.405145] pci 0000:00:1d.3: reg 0x20: [io  0x6020-0x603f]
[    0.405274] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.405428] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.405462] pci 0000:00:1d.7: reg 0x10: [mem 0x58204400-0x582047ff]
[    0.405590] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.405729] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.405872] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.406168] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.406507] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.406539] pci 0000:00:1f.2: reg 0x10: [io  0x60b8-0x60bf]
[    0.406556] pci 0000:00:1f.2: reg 0x14: [io  0x60cc-0x60cf]
[    0.406572] pci 0000:00:1f.2: reg 0x18: [io  0x60b0-0x60b7]
[    0.406589] pci 0000:00:1f.2: reg 0x1c: [io  0x60c8-0x60cb]
[    0.406605] pci 0000:00:1f.2: reg 0x20: [io  0x60a0-0x60af]
[    0.406622] pci 0000:00:1f.2: reg 0x24: [mem 0x58204000-0x582043ff]
[    0.406691] pci 0000:00:1f.2: PME# supported from D3hot
[    0.406916] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.406987] pci 0000:00:1f.3: reg 0x20: [io  0x6000-0x601f]
[    0.407373] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
[    0.407414] pci 0000:01:00.0: reg 0x10: [mem 0x57000000-0x5703ffff 64bit]
[    0.407435] pci 0000:01:00.0: reg 0x18: [io  0x5000-0x507f]
[    0.407605] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.409039] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.409048] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.409057] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.409069] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.409252] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.409293] pci 0000:02:00.0: reg 0x10: [mem 0x56000000-0x5600ffff 64bit]
[    0.409474] pci 0000:02:00.0: supports D1
[    0.409479] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.411035] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.411044] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.411053] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.411065] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.411219] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.411239] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.411244] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.411249] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.411254] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.411292] pci_bus 0000:00: on NUMA node 0
[    0.473166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.473341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.473508] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.473673] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.473838] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.474011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.474179] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.474351] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.474940] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.475066] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.475292] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.475301] vgaarb: loaded
[    0.475303] vgaarb: bridge control possible 0000:00:02.0
[    0.475494] SCSI subsystem initialized
[    0.475519] libata version 3.00 loaded.
[    0.475519] ACPI: bus type USB registered
[    0.475519] usbcore: registered new interface driver usbfs
[    0.475519] usbcore: registered new interface driver hub
[    0.475519] usbcore: registered new device driver usb
[    0.476045] PCI: Using ACPI for IRQ routing
[    0.486125] PCI: pci_cache_line_size set to 64 bytes
[    0.486211] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.486215] e820: reserve RAM buffer [mem 0x3f494000-0x3fffffff]
[    0.486220] e820: reserve RAM buffer [mem 0x3f578000-0x3fffffff]
[    0.486224] e820: reserve RAM buffer [mem 0x3f5ed000-0x3fffffff]
[    0.486227] e820: reserve RAM buffer [mem 0x3f600000-0x3fffffff]
[    0.486564] NetLabel: Initializing
[    0.486567] NetLabel:  domain hash size = 128
[    0.486569] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.486599] NetLabel:  unlabeled traffic allowed by default
[    0.486709] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.486718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.486727] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.488068] Switched to clocksource hpet
[    0.488222] pnp: PnP ACPI init
[    0.488257] ACPI: bus type PNP registered
[    0.551504] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.551513] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.551519] system 00:00: [io  0x0610] has been reserved
[    0.551525] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.551530] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.551537] system 00:00: [io  0x0400-0x047f] could not be reserved
[    0.551543] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.551548] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.551556] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.551562] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.551568] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.551574] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.551580] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.551587] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.551593] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.551601] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.551630] pnp 00:01: [dma 4]
[    0.551705] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.551826] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.552092] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.552197] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.552289] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[    0.552441] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.552619] pnp 00:07: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.552925] pnp: PnP ACPI: found 8 devices
[    0.552928] ACPI: bus type PNP unregistered
[    0.594116] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.594125] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.594136] pci 0000:00:1c.0:   bridge window [mem 0x57000000-0x57ffffff]
[    0.594145] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.594156] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.594163] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.594173] pci 0000:00:1c.1:   bridge window [mem 0x56000000-0x56ffffff]
[    0.594181] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.594193] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.594214] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.594219] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.594224] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.594229] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.594234] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.594239] pci_bus 0000:01: resource 1 [mem 0x57000000-0x57ffffff]
[    0.594245] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.594250] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.594255] pci_bus 0000:02: resource 1 [mem 0x56000000-0x56ffffff]
[    0.594260] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.594266] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.594271] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.594276] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.594281] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.594352] NET: Registered protocol family 2
[    0.594796] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.594834] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.594889] TCP: Hash tables configured (established 8192 bind 8192)
[    0.594932] TCP: reno registered
[    0.594938] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.594954] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.595121] NET: Registered protocol family 1
[    0.595317] RPC: Registered named UNIX socket transport module.
[    0.595320] RPC: Registered udp transport module.
[    0.595322] RPC: Registered tcp transport module.
[    0.595324] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.595343] pci 0000:00:02.0: Boot video device
[    0.597656] PCI: CLS 64 bytes, default 64
[    0.597790] Trying to unpack rootfs image as initramfs...
[    0.815503] Freeing initrd memory: 700K (f7b4f000 - f7bfe000)
[    0.815618] Simple Boot Flag at 0x44 set to 0x1
[    0.817182] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.817761] bounce pool size: 64 pages
[    0.823957] zbud: loaded
[    0.825643] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.826312] NFS: Registering the id_resolver key type
[    0.826339] Key type id_resolver registered
[    0.826341] Key type id_legacy registered
[    0.826359] NTFS driver 2.1.30 [Flags: R/W].
[    0.826698] fuse init (API version 7.22)
[    0.827625] aufs 3.14-20140714
[    0.827636] msgmni has been set to 1751
[    0.828584] async_tx: api initialized (async)
[    0.828741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.828802] io scheduler noop registered
[    0.828807] io scheduler deadline registered
[    0.828825] io scheduler bfq registered (default)
[    0.828827] BFQ I/O-scheduler version: v7r4
[    0.829358] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.829751] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.830143] intel_idle: MWAIT substates: 0x20220
[    0.830158] intel_idle: v0.4 model 0x1C
[    0.830161] intel_idle: lapic_timer_reliable_states 0x2
[    0.830169] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.830449] GHES: HEST is not enabled!
[    0.874312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.875897] Non-volatile memory driver v1.3
[    0.881059] brd: module loaded
[    0.898402] loop: module loaded
[    0.898408] mtip32xx Version 1.3.1
[    0.898844] zram: Created 1 device(s) ...
[    0.899371] ahci 0000:00:1f.2: version 3.0
[    0.899722] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.899785] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.899833] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.899841] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    0.901572] scsi0 : ahci
[    0.901862] scsi1 : ahci
[    0.902132] scsi2 : ahci
[    0.902378] scsi3 : ahci
[    0.902555] ata1: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204100 irq 42
[    0.902562] ata2: SATA max UDMA/133 abar m1024@0x58204000 port 0x58204180 irq 42
[    0.902565] ata3: DUMMY
[    0.902567] ata4: DUMMY
[    0.905604] libphy: Fixed MDIO Bus: probed
[    0.905609] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.905611] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.905896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.905899] ehci-pci: EHCI PCI platform driver
[    0.906235] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.906363] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.906388] ehci-pci 0000:00:1d.7: debug port 1
[    0.910301] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.910346] ehci-pci 0000:00:1d.7: irq 16, io mem 0x58204400
[    0.916061] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.916207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.916214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.916219] usb usb1: Product: EHCI Host Controller
[    0.916224] usb usb1: Manufacturer: Linux 3.14.17-pf4 ehci_hcd
[    0.916228] usb usb1: SerialNumber: 0000:00:1d.7
[    0.916643] hub 1-0:1.0: USB hub found
[    0.916663] hub 1-0:1.0: 8 ports detected
[    0.917564] ehci-platform: EHCI generic platform driver
[    0.917597] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.917611] ohci-pci: OHCI PCI platform driver
[    0.917654] ohci-platform: OHCI generic platform driver
[    0.917681] uhci_hcd: USB Universal Host Controller Interface driver
[    0.917960] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.918136] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.918185] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[    0.918335] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.918342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.918347] usb usb2: Product: UHCI Host Controller
[    0.918351] usb usb2: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.918355] usb usb2: SerialNumber: 0000:00:1d.0
[    0.918721] hub 2-0:1.0: USB hub found
[    0.918742] hub 2-0:1.0: 2 ports detected
[    0.919279] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.919415] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.919481] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[    0.919628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.919634] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.919638] usb usb3: Product: UHCI Host Controller
[    0.919643] usb usb3: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.919647] usb usb3: SerialNumber: 0000:00:1d.1
[    0.920027] hub 3-0:1.0: USB hub found
[    0.920048] hub 3-0:1.0: 2 ports detected
[    0.920589] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.920727] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.920791] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[    0.920937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.920944] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.920949] usb usb4: Product: UHCI Host Controller
[    0.920953] usb usb4: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.920958] usb usb4: SerialNumber: 0000:00:1d.2
[    0.921368] hub 4-0:1.0: USB hub found
[    0.921388] hub 4-0:1.0: 2 ports detected
[    0.921970] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.922149] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.922215] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[    0.922366] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.922373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.922377] usb usb5: Product: UHCI Host Controller
[    0.922382] usb usb5: Manufacturer: Linux 3.14.17-pf4 uhci_hcd
[    0.922386] usb usb5: SerialNumber: 0000:00:1d.3
[    0.922760] hub 5-0:1.0: USB hub found
[    0.922781] hub 5-0:1.0: 2 ports detected
[    0.923344] usbcore: registered new interface driver usb-storage
[    0.923374] usbcore: registered new interface driver ums_eneub6250
[    0.923414] usbcore: registered new interface driver ums-realtek
[    0.923516] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.939308] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.939320] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.939629] mousedev: PS/2 mouse device common for all mice
[    0.939839] md: linear personality registered for level -1
[    0.939843] md: raid0 personality registered for level 0
[    0.939847] md: raid1 personality registered for level 1
[    0.939851] md: raid10 personality registered for level 10
[    0.939991] md: raid6 personality registered for level 6
[    0.939995] md: raid5 personality registered for level 5
[    0.939997] md: raid4 personality registered for level 4
[    0.940284] device-mapper: uevent: version 1.0.3
[    0.940540] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.940707] device-mapper: multipath: version 1.6.0 loaded
[    0.940712] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.940716] device-mapper: multipath queue-length: version 0.1.0 loaded
[    0.940719] device-mapper: multipath service-time: version 0.2.0 loaded
[    0.940875] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    0.940880] device-mapper: raid: Loading target version 1.5.2
[    0.941031] device-mapper: cache-policy-mq: version 1.2.0 loaded
[    0.941035] device-mapper: cache cleaner: version 1.0.0 loaded
[    0.941043] ledtrig-cpu: registered to indicate activity on CPUs
[    0.941091] hidraw: raw HID events driver (C) Jiri Kosina
[    0.941264] usbcore: registered new interface driver usbhid
[    0.941266] usbhid: USB HID core driver
[    0.941548] Netfilter messages via NETLINK v0.30.
[    0.941677] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.941759] NET: Registered protocol family 17
[    0.941826] Key type dns_resolver registered
[    0.941928] Using IPI No-Shortcut mode
[    0.941944] TuxOnIce 3.3 (http://tuxonice.net)
[    1.069156] UKSM: relative memcmp_cost = 276 hash=1459727947 cmp_ret=0.
[    1.074079] regulator-dummy: disabling
[    1.074411] TuxOnIce: Ignoring late initcall, as requested.
[    1.079630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.275127] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    1.363118] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.363769] ata1.00: unexpected _GTF length (4)
[    1.363961] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.363966] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.364600] ata1.00: unexpected _GTF length (4)
[    1.364758] ata1.00: configured for UDMA/133
[    1.365034] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
[    1.365455] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.365462] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.365612] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.365627] sd 0:0:0:0: [sda] Write Protect is off
[    1.365635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.365711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.375990]  sda: sda1 sda2 sda3 sda4
[    1.377045] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.492327] usb 1-4: New USB device found, idVendor=0402, idProduct=7670
[    1.492333] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.492338] usb 1-4: Product: WebCam
[    1.492342] usb 1-4: Manufacturer: Lite-On
[    1.670126] ata2: SATA link down (SStatus 0 SControl 300)
[    1.670528] Freeing unused kernel memory: 452K (c15e5000 - c1656000)
[    1.670609] Write protecting the kernel text: 4536k
[    1.670684] Write protecting the kernel read-only data: 1148k
[    1.670692] NX-protecting the kernel data: 3656k
[    1.670840] BFS CPU scheduler v0.447 by Con Kolivas.
[    2.070739] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.104875] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.151405] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 528321
[    2.215510] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.290703] random: nonblocking pool is initialized
[    2.791941] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.834832] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.017075] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[    6.017604] systemd[1]: Detected architecture 'x86'.
[    6.238841] NET: Registered protocol family 10
[    6.239460] systemd[1]: Inserted module 'ipv6'
[    6.269088] systemd[1]: Set hostname to <pra>.
[    6.637205] systemd[1]: Unit mnt-sda4.mount is bound to inactive service. Stopping, too.
[    6.637314] systemd[1]: Unit mnt-sda3.mount is bound to inactive service. Stopping, too.
[    6.637382] systemd[1]: Unit mnt-sda2.mount is bound to inactive service. Stopping, too.
[    6.637448] systemd[1]: Unit mnt-sda1.mount is bound to inactive service. Stopping, too.
[    6.640578] systemd[1]: Cannot add dependency xlogin@live.service1 to graphical.target, ignoring: Invalid argument
[    6.670759] systemd[1]: Cannot add dependency getty@tty1.service0 to getty.target, ignoring: Invalid argument
[    6.704478] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.704783] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.704832] systemd[1]: Starting Remote File Systems.
[    6.705424] systemd[1]: Reached target Remote File Systems.
[    6.705536] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.705794] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.705834] systemd[1]: Starting Paths.
[    6.706311] systemd[1]: Reached target Paths.
[    6.706425] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.707226] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.707283] systemd[1]: Starting Encrypted Volumes.
[    6.707687] systemd[1]: Reached target Encrypted Volumes.
[    6.707726] systemd[1]: Starting Swap.
[    6.708132] systemd[1]: Reached target Swap.
[    6.708176] systemd[1]: Expecting device dev-sda1.device...
[    6.708482] systemd[1]: Expecting device dev-sda2.device...
[    6.708782] systemd[1]: Expecting device dev-sda3.device...
[    6.709121] systemd[1]: Expecting device dev-sda4.device...
[    6.709426] systemd[1]: Starting Root Slice.
[    6.737358] systemd[1]: Created slice Root Slice.
[    6.737415] systemd[1]: Starting User and Session Slice.
[    6.738403] systemd[1]: Created slice User and Session Slice.
[    6.738452] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.739071] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.739120] systemd[1]: Starting Delayed Shutdown Socket.
[    6.739619] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.739664] systemd[1]: Starting Journal Socket (/dev/log).
[    6.740342] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.740442] systemd[1]: Starting udev Control Socket.
[    6.740973] systemd[1]: Listening on udev Control Socket.
[    6.741075] systemd[1]: Starting udev Kernel Socket.
[    6.741541] systemd[1]: Listening on udev Kernel Socket.
[    6.741615] systemd[1]: Starting Journal Socket.
[    6.742183] systemd[1]: Listening on Journal Socket.
[    6.742284] systemd[1]: Starting System Slice.
[    6.743346] systemd[1]: Created slice System Slice.
[    6.743424] systemd[1]: Starting system-getty.slice.
[    6.744578] systemd[1]: Created slice system-getty.slice.
[    6.744675] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.746621] systemd[1]: Mounted Huge Pages File System.
[    6.746754] systemd[1]: Mounting POSIX Message Queue File System...
[    6.753278] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.757853] systemd[1]: Mounting Debug File System...
[    6.793761] systemd[1]: Started Set Up Additional Binary Formats.
[    6.798419] systemd[1]: Started Load Kernel Modules.
[    6.798603] systemd[1]: Mounting FUSE Control File System...
[    6.809708] systemd[1]: Mounted Configuration File System.
[    6.809836] systemd[1]: Starting Apply Kernel Variables...
[    6.817600] systemd[1]: Starting udev Coldplug all Devices...
[    6.820676] systemd[1]: Starting Setup Virtual Console...
[    6.826975] systemd[1]: Starting Journal Service...
[    6.830535] systemd[1]: Starting Slices.
[    6.832098] systemd[1]: Reached target Slices.
[    6.952271] systemd[1]: Mounting Temporary Directory...
[    6.997160] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.393307] systemd[1]: Started Apply Kernel Variables.
[    7.549438] systemd[1]: Mounted Debug File System.
[    7.550112] systemd[1]: Mounted FUSE Control File System.
[    7.550736] systemd[1]: Mounted POSIX Message Queue File System.
[    7.551423] systemd[1]: Mounted Temporary Directory.
[    7.563477] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.783585] systemd[1]: Starting Rebuild Dynamic Linker Cache...
[    7.799615] systemd[1]: Started First Boot Wizard.
[    7.799726] systemd[1]: Starting Load/Save Random Seed...
[    7.816736] systemd[1]: Starting Create System Users...
[    7.972687] systemd[1]: Starting Rebuild Hardware Database...
[    7.979814] systemd[1]: Started Journal Service.
[    8.332384] systemd-journald[678]: Received request to flush runtime journal from PID 1
[   11.024326] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   11.024340] ACPI: Power Button [PWRB]
[   11.024651] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   11.024662] ACPI: Sleep Button [SLPB]
[   11.024969] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.025080] ACPI: Lid Switch [LID0]
[   11.025447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   11.025459] ACPI: Power Button [PWRF]
[   11.195721] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   11.198389] wmi: Mapper loaded
[   11.272756] rtc_cmos 00:02: RTC can wake from S4
[   11.273646] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   11.273704] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[   11.277257] thermal LNXTHERM:00: registered as thermal_zone0
[   11.277263] ACPI: Thermal Zone [THRM] (53 C)
[   11.277470] ACPI: Fan [FAN] (on)
[   11.312300] ACPI: AC Adapter [AC] (on-line)
[   11.339799] Linux agpgart interface v0.103
[   11.347342] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[   11.347425] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   11.347513] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   11.347873] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[   11.738978] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[   11.745856] [drm] Initialized drm 1.1.0 20060810
[   11.851077] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   11.937351] cfg80211: Calling CRDA to update world regulatory domain
[   11.946393] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMBA) (20131218/utaddress-258)
[   11.946414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.946420] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000053e (\GPIO) (20131218/utaddress-258)
[   11.946434] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.946438] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000053e (\GPIO) (20131218/utaddress-258)
[   11.946451] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.946455] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.184399] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   12.184423] ACPI: Battery Slot [BAT0] (battery present)
[   12.272255] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[   12.276869] media: Linux media interface: v0.10
[   12.393352] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[   12.469129] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.520665] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   12.549858] Linux video capture interface: v2.00
[   12.617594] [drm] Memory usable by graphics device = 512M
[   12.624140] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   12.624167] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.624170] [drm] Driver supports precise vblank timestamp query.
[   12.624340] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.649948] [drm] initialized overlay support
[   12.753995] fbcon: inteldrmfb (fb0) is primary device
[   13.185198] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   13.189849] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.210152] uvcvideo: Found UVC 1.00 device WebCam (0402:7670)
[   13.214202] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input10
[   13.234878] ath: phy0: Enable LNA combining
[   13.236456] ath: EEPROM regdomain: 0x8283
[   13.236458] ath: EEPROM indicates we should expect a country code
[   13.236461] ath: doing EEPROM country->regdmn map search
[   13.236464] ath: country maps to regdmn code: 0x3
[   13.236466] ath: Country alpha2 being used: RU
[   13.236468] ath: Regpair used: 0x3
[   13.239107] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.240295] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9e80000, irq=17
[   13.241330] usbcore: registered new interface driver uvcvideo
[   13.241332] USB Video Class driver (1.1.1)
[   13.242882] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.448065] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[   13.456645] Console: switching to colour frame buffer device 100x37
[   13.465193] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.465198] i915 0000:00:02.0: registered panic notifier
[   13.478127] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   13.784229] acpi device:28: registered as cooling_device3
[   13.784590] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   13.784829] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.132237] acer_wmi: Acer Laptop ACPI-WMI Extras
[   14.287119] acer_wmi: Function bitmap for Communication Device: 0x1
[   14.287136] acer_wmi: Brightness must be controlled by acpi video driver
[   14.287878] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[   20.734427] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[   20.746364] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   20.843492] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   31.358212] aufs may_rename_srcdir:469:mv[973]: renaming dir who has child(ren) on multiple branches, is not supported
[   73.314196] usb 1-5: new high-speed USB device number 3 using ehci-pci
[   73.429654] usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
[   73.429665] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[   73.429674] usb 1-5: Product: UB6250       
[   73.429681] usb 1-5: Manufacturer: ENE Flash  
[   73.429688] usb 1-5: SerialNumber: 606569746801
[   73.434283] ums_eneub6250 1-5:1.0: USB Mass Storage device detected
[   73.434561] scsi4 : usb-storage 1-5:1.0
[   73.434992] usb-storage: waiting for device to settle before scanning
[   77.440141] usb-storage: device found at 3
[   77.440300] usb-storage: device scan complete
[   77.929442] scsi scan: INQUIRY result too short (5), using 36
[   77.929457] scsi 4:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0
[   77.940827] sd 4:0:0:0: [sdb] 4022272 512-byte logical blocks: (2.05 GB/1.91 GiB)
[   77.940890] sd 4:0:0:0: [sdb] Write Protect is off
[   77.940901] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[   77.940960] sd 4:0:0:0: [sdb] No Caching mode page found
[   77.940968] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   77.941090] sd 4:0:0:0: Attached scsi generic sg1 type 0
[   77.941752] sd 4:0:0:0: [sdb] No Caching mode page found
[   77.941763] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   77.953078]  sdb: sdb1
[   77.953884] sd 4:0:0:0: [sdb] No Caching mode page found
[   77.953892] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   77.953900] sd 4:0:0:0: [sdb] Attached SCSI disk
[   80.976104] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   80.979416] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Post Reply