usb-e-sata key
Here you can post about your various experiences with PC hardware. You can also post about hardware that is not compatible with the linux kernel or not recommended for use with Porteus.
usb-e-sata key
Post#1 by beny » 01 Feb 2011, 13:18
hi i have a team data key 16giga with double connector usb and e-sata i have purchase it because with e-sata, speed is 700x,well no way to install porteus on it, when boot, bios reboot loop, the key is out with fat 32 but i have tried with xfs,seem with linux file system it is corrupted,anyone have an hint,ps model is team X092
beny
Ahau
Re: usb-e-sata key
Post#3 by beny » 01 Feb 2011, 17:23
hi i have tried to boot from fat32 first,but when i choose usb key and enter, reboot immediately.
Posted after 1 minute 14 seconds:
and key have a double connector usb and to other side e-sata
Posted after 1 minute 14 seconds:
and key have a double connector usb and to other side e-sata
beny
- Ahau
- King of Docs
- Posts: 1331
- Joined: 28 Dec 2010, 15:18
- Distribution: LXDE & Xfce 32/64-bit
- Location: USA
Re: usb-e-sata key
Post#4 by Ahau » 01 Feb 2011, 18:19
Sorry, I wasn't clear.
Try putting porteus on a different usb drive, that you know will boot. Boot in to the syslinux menu on that device, then insert your e-sata drive, and select "Plop bootloader", and see if you can find the e-sata drive in the Plop menu, and try to boot from it.
I'm not very familiar with Plop, but I do know that it can boot from usb devices, even when not supported by the local bios.
Try putting porteus on a different usb drive, that you know will boot. Boot in to the syslinux menu on that device, then insert your e-sata drive, and select "Plop bootloader", and see if you can find the e-sata drive in the Plop menu, and try to boot from it.
I'm not very familiar with Plop, but I do know that it can boot from usb devices, even when not supported by the local bios.
Please take a look at our online documentation, here. Suggestions are welcome!
Ahau
beny
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: usb-e-sata key
Post#6 by fanthom » 02 Feb 2011, 12:29
@beny
I need to know at which exact stage it fails.
please make a photo (if possible) of the error and link it here.
Does it work when you use usb connector instead of e-sata?
I need to know at which exact stage it fails.
please make a photo (if possible) of the error and link it here.
Does it work when you use usb connector instead of e-sata?
Please add [Solved] to your thread title if the solution was found.
fanthom
Re: usb-e-sata key
Post#7 by beny » 02 Feb 2011, 13:17
hi fanthom the key via usb reboot when i choose start option in grub pannel,with fat 32 and windows script it is the same,it seem some e sata driver hidden that make acpi trouble,but it is only my idea,i have purchase it for adds speed to system but....no way only storage data key
beny
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: usb-e-sata key
Post#8 by fanthom » 03 Feb 2011, 21:50
Did you try it on another PC? does it behave the same?
i dont understand this part:
"i have tried with xfs,seem with linux file system it is corrupted"
where it is saying that xfs is corrupted? after running 'liloinst.sh'? during boot?
i dont understand this part:
"i have tried with xfs,seem with linux file system it is corrupted"
where it is saying that xfs is corrupted? after running 'liloinst.sh'? during boot?
Please add [Solved] to your thread title if the solution was found.
fanthom