pstocanonbj or bjfilter [x86_64]

[Blaze]

Hi.

Where can I find package or module bjfilter (pstocanonbj) for x86_64 architecture?

Code: Select all

/usr/lib64/cups/filter/pstocanonbj

It need for my printer Canon iP1500

Thanks.

[Hamza]

pstocanonbj.xzm for 64bit

Version 3.3.

[Blaze]

Hi Hamza.
How are you?
Thanks for your module.

Now i have in http://localhost:631/jobs/

Code: Select all

"child process aborted"

in http://localhost:631/admin/log/error_log

Code: Select all

E [07/Mar/2013:20:45:38 +0000] [CGI] Saw EOF, expected '}'!
E [07/Mar/2013:20:45:44 +0000] [CGI] Saw EOF, expected '}'!
E [07/Mar/2013:20:45:47 +0000] [Job 6] child process aborted
E [07/Mar/2013:20:45:47 +0000] [Job 6] Job stopped due to filter errors; please consult the error_log file for details.
D [07/Mar/2013:20:45:47 +0000] [Job 6] The following messages were recorded from 20:45:47 to 20:45:47
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Read 163 bytes of back-channel data...
D [07/Mar/2013:20:45:47 +0000] [Job 6] Before page loop - %%Page: 1 1
D [07/Mar/2013:20:45:47 +0000] [Job 6] Copying page 1...
D [07/Mar/2013:20:45:47 +0000] [Job 6] pagew = 576.0, pagel = 819.2
D [07/Mar/2013:20:45:47 +0000] [Job 6] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [07/Mar/2013:20:45:47 +0000] [Job 6] PageLeft = 9.6, PageRight = 585.6
D [07/Mar/2013:20:45:47 +0000] [Job 6] PageTop = 833.4, PageBottom = 14.2
D [07/Mar/2013:20:45:47 +0000] [Job 6] PageWidth = 595.0, PageLength = 842.0
D [07/Mar/2013:20:45:47 +0000] [Job 6] Wrote 1 pages...
D [07/Mar/2013:20:45:47 +0000] [Job 6] PID 12876 (pstops) exited with no errors.
D [07/Mar/2013:20:45:47 +0000] [Job 6] PID 12874 (pdftops) exited with no errors.
D [07/Mar/2013:20:45:47 +0000] [Job 6] Waiting for read thread to exit...
D [07/Mar/2013:20:45:47 +0000] [Job 6] End of messages
D [07/Mar/2013:20:45:47 +0000] [Job 6] printer-state=3(idle)
D [07/Mar/2013:20:45:47 +0000] [Job 6] printer-state-message="Sending data to printer."
D [07/Mar/2013:20:45:47 +0000] [Job 6] printer-state-reasons=none
E [07/Mar/2013:20:45:51 +0000] [CGI] Saw EOF, expected '}'!

[Hamza]

Pretty good, thanks.

It seems to be a script error as you have an EOF error in the error_log.

[Blaze]

Hamza, I'm glad to see you!

I have done the module pstocanonbj_3.3.orig_x86_64.xzm from this source pstocanonbj_3.3.orig.tar.gz.

I tweak configure file of this source for x86_64 architecture

Find

Code: Select all

ac_default_prefix=/usr/local

Replace with

Code: Select all

ac_default_prefix=/usr

Find

Code: Select all

libdir='${exec_prefix}/lib'

Replace with

Code: Select all

libdir='${exec_prefix}/lib64'

run ./configure and compiled it with make & make install
but it does not help me

In http://localhost:631/admin/log/error_log i have this error_log

Code: Select all

Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported

Code: Select all

root@porteus:~# ls -la /var/run/cups/certs/
итого 12
dr-x--x--x 2 lp   sys 4096 Мар  8 13:30 ./
drwxr-xr-x 4 root lp  4096 Мар  8 13:30 ../
-r--r----- 1 root sys   32 Мар  8 13:30 0

[Hamza]

https://bbs.archlinux.org/viewtopic.php ... 80#p851280

[Blaze]

Your advice did not help me. If who need in foomatic-filters-4.0.12-x86_64-1.xzm you can download here

Any advice, howto run my printer?

[Hamza]

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=698521

Do you have the latest CUPS available? Sometimes Slackware repositories don't provide latest version available.

[Blaze]

Yes. I have made the module cups-1-6-1-x86-64-4wsr-xzm from this source cups-1-6-1-tar-bz but it did not help me.

[Hamza]

It seems to be a problem from localization files present in CUPS. It has been reported that issue may causes the same type of issue.

[francois]

Hello blaze. I don't know if this will be of any help as I do not have a canon printer myself. However, they are 32bit drivers. Could they provide a solution with compat-32 package as proposed by Bjornar with its brother printer?
http://forum.porteus.org/viewtopic.php? ... 3&start=15

I could not test the drivers. I have downloaded the package 22415.tgz:
http://software.canon-europe.com/softwa ... asp?model=

It contains amongst other files and instructions:
-bjfilter-common-2.50-2.i386.rpm
-bjfilter-common-2.50-2.src.rpm
-bjfilter-pixmaip1500-2.50-2.i386.rpm
-bjfilter-pixmaip1500-lprng-2.50-2.i386.rpm

compat-32 needed:
http://ponce.cc/porteus/x86_64/packages/

[francois]

For x86-64, if you are using gutenscript-ghostscript method the error is due to the fact that you did not update to gutenprint and ghostscript slackware 14.0. This was the error that I made.

Open printing solutions:
http://www.openprinting.org/printer/Can ... XMA_iP5000

If not, you should use the gutenprint-ghostscript method. You can find the appropriate gutenprint and ghostscript packages in the following thread:
http://forum.porteus.org/viewtopic.php? ... 057#p14057

If you prefer you can install your printer thru system-printer-config, use PPM to download it with its dependencies:
http://forum.porteus.org/viewtopic.php?f=61&t=1994

I have looked thru CUPS and thru system-printer-config and I can see the Canon pixma ip5000 in the list.

Have fun.

[francois]

@blaze:
Did you tried the ppd with system-config-printer? Here is the Canon-PIXMA-iP5000.ppd:
http://www.mediafire.com/download/g04jb ... iP5000.ppd

Put the ppd in etc/cups/ppd/

With printing module:
System > printing > + > provide ppd file (PostScript Printer Description (PPD) ...) > etc/cups/ppd/ > open > forward > apply

[Blaze]

@francois
i tried Canon PIXMA iP5000 - CUPS+Gutenprint v5.2.9 but i failed

http://localhost:631/admin/log/access_log

Code: Select all

localhost - - [13/Dec/2013:00:08:10 +0400] "POST / HTTP/1.1" 200 252 Create-Printer-Subscription successful-ok
localhost - - [13/Dec/2013:00:10:45 +0400] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok
localhost - - [13/Dec/2013:00:10:47 +0400] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok
localhost - root [13/Dec/2013:00:10:47 +0400] "POST / HTTP/1.1" 200 1166 CUPS-Get-Devices -
localhost - root [13/Dec/2013:00:10:45 +0400] "POST / HTTP/1.1" 200 2067 CUPS-Get-Devices -
localhost - root [13/Dec/2013:00:10:48 +0400] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -
localhost - - [13/Dec/2013:00:10:52 +0400] "POST / HTTP/1.1" 200 1439967 CUPS-Get-PPDs -
localhost - - [13/Dec/2013:00:10:48 +0400] "POST / HTTP/1.1" 200 1439967 CUPS-Get-PPDs -
localhost - - [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 401 98186 CUPS-Add-Modify-Printer successful-ok
localhost - root [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 200 98186 CUPS-Add-Modify-Printer successful-ok
localhost - root [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 200 128 Resume-Printer successful-ok
localhost - root [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 200 128 CUPS-Accept-Jobs successful-ok
localhost - root [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 200 128 CUPS-Set-Default successful-ok
localhost - root [13/Dec/2013:00:11:19 +0400] "POST /admin/ HTTP/1.1" 200 157 CUPS-Add-Modify-Printer successful-ok
localhost - root [13/Dec/2013:00:11:20 +0400] "POST /admin/ HTTP/1.1" 200 158 CUPS-Add-Modify-Printer successful-ok
localhost - - [13/Dec/2013:00:11:28 +0400] "POST /printers/Canon-iP1500 HTTP/1.1" 200 452 Print-Job successful-ok
localhost - - [13/Dec/2013:00:13:36 +0400] "POST /printers/Canon-iP1500 HTTP/1.1" 200 11405 Print-Job successful-ok
localhost - - [13/Dec/2013:00:14:18 +0400] "GET /admin/log/error_log HTTP/1.1" 200 120 - - 

http://localhost:631/admin/log/error_log

Code: Select all

E [13/Dec/2013:00:01:22 +0400] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported

When i try to print I see a flashing light bulb of my printer, but nothing prints

Code: Select all

? Queue Name ?    Description    Location    Make and Model    Status
Canon-iP1500    Canon iP1500    porteus    Canon PIXMA iP5000 - CUPS+Gutenprint v5.2.9    Idle - "Rendering completed" 

[francois]

Do you have foomatic-filter? See post 11:
https://bbs.archlinux.org/viewtopic.php?pid=851259