wifi support intel card

[banshee22]

Hi All,

I've a bug on a wifi card recognition, can anyone help please? see dmesg below, where can I find this missing firmware file?

[ 9.140670] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 9.140673] Copyright(c) 2003-2011 Intel Corporation
[ 9.140774] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.140806] iwlagn 0000:02:00.0: setting latency timer to 64
[ 9.140846] iwlagn 0000:02:00.0: pci_resource_len = 0x00002000
[ 9.140849] iwlagn 0000:02:00.0: pci_resource_base = f93f0000
[ 9.140851] iwlagn 0000:02:00.0: HW Revision ID = 0x35
[ 9.140978] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
[ 9.141052] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 9.141161] iwlagn 0000:02:00.0: L1 Enabled; Disabling L0S
[ 9.157879] iwlagn 0000:02:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 9.157882] iwlagn 0000:02:00.0: Device SKU: 0X1f0
[ 9.157902] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 9.163680] rtc_cmos 00:06: RTC can wake from S4
[ 9.164076] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 9.164113] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 9.182940] wmi: Mapper loaded
[ 9.217168] ACPI: acpi_idle yielding to intel_idle
[ 9.253438] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.253498] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9.253528] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.277077] iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-6000-4.ucode' failed.
[ 9.277081] iwlagn 0000:02:00.0: no suitable firmware found!
[ 9.277270] iwlagn 0000:02:00.0: PCI INT A disabled

Banshee

[Hamza]

Hello

Please use CODE Tag

Code: Select all

[code]Your file/output

[/code]

Thanks!

[francois]

@banshee22:
What is the output for your wifi card from the lspci command? What is your computer model?

[fanthom]

hello banshee22,

not sure why but this package is missing in porteus-1.1 32bit edition (present in 1.2 rc1):
link
please convert it to xzm and should be ok