Install and optimise Porteus v5 on asus t100

[benjibasson]

Hi,
I would like to use Porteus v05.1 on the asus t100 I have saved from the bin. I plan to use it to do RDP in the plant witch is 100% covered by WiFi.

What is broken? The touch screen glass, windows 8.1

I have added porteus 5.01 i586 on the magic key and it displays the xfce desktop. Unfortunately have no WiFi, no screen dim settings, and suspend freez with screen light on ( so unsupported grafic card and spend probably power.).
Hardware

Code: Select all

lspci -vnn
Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0
	Kernel driver in use: iosf_mbi_pci

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0, IRQ 129
	Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
	Memory at 80000000 (32-bit, prefetchable) [size=256M]
	I/O ports at 1000 [size=8]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: [d0] Power Management version 2
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Vendor Specific Information: Len=07 <?>
	Kernel driver in use: i915
	Kernel modules: i915

00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [8086:0f35] (rev 09) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, medium devsel, latency 0, IRQ 123
	Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [70] Power Management version 2
	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
	Kernel driver in use: xhci_hcd

00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0, IRQ 127
	Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
	Memory at 90600000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [80] Power Management version 3
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Kernel driver in use: mei_txe
	Kernel modules: mei_txe

00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

Log

Code: Select all

dmesg | egrep -i 'broad|wlan|firm|b43|phy|bcm|fw|wl|ssb|error|faile|warn|issue|resolve|found|bug|loaded'
[    0.000000] BIOS-provided physical RAM map:
[    0.173931] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.196586] PCI: [Firmware Info]: ECAM [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[    0.196617] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.221196] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.225519] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.232731] byt_gpio INT33FC:02: [Firmware Bug]: Pin 1: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc80), clearing
[    0.232788] byt_gpio INT33FC:02: [Firmware Bug]: Pin 8: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing
[    0.250800] libata version 3.00 loaded.
[    0.436226] vgaarb: loaded
[    0.447757] pnp: PnP ACPI: found 3 devices
[    0.457414] zbud: loaded
[    0.458229] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.598054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.610418] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.610588] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.614447] ACPI: thermal: [Firmware Bug]: No valid trip points!
[    0.636301] loop: module loaded
[    0.641395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    0.641827] hub 1-0:1.0: USB hub found
[    0.643753] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    0.644133] hub 2-0:1.0: USB hub found
[    0.645236] usbcore: registered new interface driver ums-onetouch
[    0.645397] i8042: PNP: No PS/2 controller found.
[    0.656760] IPI shorthand broadcast: enabled
[    0.713214] Loaded X.509 cert 'Build time autogenerated kernel key: bdc5f3ff5fc3501e156a8b404353e2b21e11b189'
[    0.717683] Btrfs loaded, zoned=no, fsverity=no
[    0.719363]   No soundcards found.
[    1.010000] usb 1-3: New USB device found, idVendor=0b05, idProduct=17e0, bcdDevice= 2.46
[    1.014336] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0001/input/input2
[    1.066159] hid-generic 0003:0B05:17E0.0001: input,hidraw0: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input0
[    1.070169] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0002/input/input3
[    1.122159] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0002/input/input4
[    1.122568] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0002/input/input6
[    1.123244] hid-generic 0003:0B05:17E0.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input1
[    1.126443] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0003/input/input7
[    1.127267] hid-generic 0003:0B05:17E0.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input2
[    1.379600] usb 1-4: New USB device found, idVendor=13fe, idProduct=1e00, bcdDevice= 1.10
[    2.419158] sd 0:0:0:0: [sda] No Caching mode page found
[   25.885774] ipv6: module verification failed: signature and/or required key missing - tainting kernel
[   36.201116] i915 0000:00:02.0: [drm] *ERROR* Failed to own gpio for panel control
[   36.201132] i915 0000:00:02.0: [drm] *ERROR* [CONNECTOR:86:DSI-1] Failed to get the PMIC PWM chip
[   36.237970] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   36.239152] i915 display info: cursor_needs_physical: no
[   36.239156] i915 display info: has_cdclk_crawl: no
[   36.239203] i915 display info: overlay_needs_physical: no
[   36.401884] input: ATML1000:00 03EB:8C0D Touchscreen as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/0018:03EB:8C0D.0004/input/input10
[   36.402222] hid-generic 0018:03EB:8C0D.0004: input,hidraw3: I2C HID v1.00 Device [ATML1000:00 03EB:8C0D] on i2c-ATML1000:00
[   37.270241] intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2
[   37.270260] intel_sst_acpi 80860F28:00: request fw failed
[   37.582083] asus_wmi: ASUS WMI generic driver loaded
[   37.615339] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input12
[   37.619044] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
[   37.620009] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
[   37.620382] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19
[   37.770054] input: ATML1000:00 03EB:8C0D as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/0018:03EB:8C0D.0004/input/input13
[   37.774862] hid-multitouch 0018:03EB:8C0D.0004: input,hidraw3: I2C HID v1.00 Device [ATML1000:00 03EB:8C0D] on i2c-ATML1000:00
[   37.804409] input: bytcr-rt5640 Headset as /devices/platform/80860F28:00/bytcr_rt5640/sound/card0/input15
[   37.859717] intel_rapl_common: Found RAPL domain package
[   37.859729] intel_rapl_common: Found RAPL domain core
[   37.927217] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0001/input/input16
[   37.982013] asus 0003:0B05:17E0.0001: input,hidraw0: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input0
[   38.048181] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0002/input/input17
[   38.105144] asus 0003:0B05:17E0.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input1
[   38.133862] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0003/input/input18
[   38.187375] asus 0003:0B05:17E0.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input2
[   52.482933] intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2
[   52.482949] intel_sst_acpi 80860F28:00: request fw failed -2
[   52.482954] intel_sst_acpi 80860F28:00: FW download fail -2
[   53.485726] intel_sst_acpi 80860F28:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3
[   53.485743] intel_sst_acpi 80860F28:00: fw returned err -16
[   53.485758] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on ssp2-port: -16
[   53.485769]  SSP2-Codec: ASoC: error at __soc_pcm_open on SSP2-Codec: -16
[   53.485776]  Baytrail Audio Port: ASoC: error at dpcm_be_dai_startup on Baytrail Audio Port: -16
[   53.485781]  Baytrail Audio Port: ASoC: error at dpcm_fe_dai_startup on Baytrail Audio Port: -16

Live memory

Code: Select all

total 0
drwxr-xr-x  5 root  61 May 17  2024 000-kernel.xzm/
drwxr-xr-x 19 root 292 May 11  2024 001-core.xzm/
drwxr-xr-x  9 root 141 May 11  2024 002-xorg.xzm/
drwxr-xr-x  6 root  72 May 11  2024 002-xtra.xzm/
drwxr-xr-x  9 root 106 Dec 29  2023 003-xfce.xzm/

Porteus

Code: Select all

001-core.xzm:20240511
002-xorg.xzm:20240511
002-xtra.xzm:20240511
003-xfce.xzm:20231229
initrd.xz:20230923

Kernel architecture

Code: Select all

Linux porteus.example.net 6.8.10-porteus #1 SMP PREEMPT_DYNAMIC Fri May 17 19:01:16 MSK 2024 i686 Intel(R) Atom(TM) CPU  Z3740  @ 1.33GHz GenuineIntel GNU/Linux

And for wifi:
wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireles ... eless-info && chmod +x wireless-info && ./wireless-info
cat wireless-info.txt ( downloaded from other computer)

Code: Select all

########## wireless info START ##########

Report from: 05 Dec 2020 03:21 Local time zone must be set--see zic manual page +0000

Booted last: 05 Dec 2020 03:19 Local time zone must be set--see zic manual page +0000

Script from: 25 Jan 2020 03:34 UTC +0000

##### release ###########################

./wireless-info: line 155: lsb_release: command not found

##### kernel ############################

Linux 6.8.10-porteus #1 SMP PREEMPT_DYNAMIC Fri May 17 19:01:16 MSK 2024 i686 Intel(R) Atom(TM) CPU  Z3740  @ 1.33GHz GenuineIntel GNU/Linux

quiet, BOOT_IMAGE=/boot/syslinux/vmlinuz, ramsize=23%, zram=50%, copy2ram

##### desktop ###########################

/usr/bin/startxfce4

##### lspci #############################

##### lsusb #############################

Bus 002 Device 001: ID 1d6b:0003 Linux 6.8.10-porteus xhci-hcd xHCI Host Controller
Bus 001 Device 003: ID 13fe:1e00 PNY      ATTACHE OPTIMA  
Bus 001 Device 002: ID 0b05:17e0 ASUSTek COMPUTER INC. ASUS Base Station(T100)
Bus 001 Device 001: ID 1d6b:0002 Linux 6.8.10-porteus xhci-hcd xHCI Host Controller

##### PCMCIA card info ##################

'pccardctl' is not installed (package "pcmciautils").

##### rfkill ############################

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

asus_nb_wmi            24576  0
asus_wmi               53248  2 hid_asus,asus_nb_wmi
ledtrig_audio          12288  2 asus_wmi,snd_ctl_led
sparse_keymap          12288  1 asus_wmi
platform_profile       12288  1 asus_wmi
snd_soc_sst_bytcr_rt5640    36864  0
rfkill                 20480  1 asus_wmi
led_class              12288  3 asus_wmi,hid_asus,input_leds
snd_soc_rt5670         90112  0
snd_soc_rt5651         57344  0
snd_soc_acpi           12288  4 snd_soc_sst_bytcr_rt5640,snd_intel_sst_acpi,snd_sof_intel_atom,snd_soc_acpi_intel_match
snd_soc_rt5645        106496  0
video                  49152  3 asus_wmi,asus_nb_wmi,i915
wmi                    16384  2 asus_wmi,video
snd_soc_rt5640         81920  2 snd_soc_sst_bytcr_rt5640
snd_soc_rl6231         12288  4 snd_soc_rt5670,snd_soc_rt5640,snd_soc_rt5645,snd_soc_rt5651
snd_soc_core          172032  7 snd_soc_sst_bytcr_rt5640,snd_soc_rt5670,snd_soc_rt5640,snd_soc_sst_atom_hifi2_platform,snd_sof,snd_soc_rt5645,snd_soc_rt5651
snd_pcm                86016  10 snd_compress,snd_soc_sst_bytcr_rt5640,snd_sof_utils,snd_soc_rt5670,snd_soc_rt5640,snd_soc_sst_atom_hifi2_platform,snd_sof,snd_soc_rt5645,snd_soc_core,snd_soc_rt5651

##### interfaces ########################

##### ifconfig ##########################

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 24  bytes 1200 (1.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 24  bytes 1200 (1.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

##### iwconfig ##########################

lo        no wireless extensions.

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo

##### resolv.conf #######################

[644 root '/etc/resolv.conf']
search example.net

##### network managers ##################

Installed:

	NetworkManager

Running:

root      1160     1  0 03:19 ?        00:00:00 /usr/sbin/NetworkManager

##### NetworkManager info ###############

##### NetworkManager.state ##############

cat: /var/lib/NetworkManager/NetworkManager.state: No such file or directory

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/00-dhcp-client.conf]]
[main]
dhcp=dhclient

[[/etc/NetworkManager/conf.d/00-rc-manager.conf]]
[main]
rc-manager=file

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=keyfile
dhcp=dhclient
[keyfile]

##### NetworkManager profiles ###########

##### Netplan config ####################

##### iw reg get ########################

'iw' is not installed (package "iw").

##### iwlist channels ###################

lo        no frequency information.

##### iwlist scan #######################

lo        Interface doesn't support scanning.

##### module infos ######################

##### module parameters #################

##### /etc/modules ######################

grep: /etc/modules: No such file or directory

##### modprobe options ##################

[/etc/modprobe.d/b43_blacklist.conf]
blacklist b43
blacklist b43legacy
blacklist b44
blacklist bcma
blacklist brcm80211
blacklist brcmfmac
blacklist brcmsmac
blacklist ssb

[/etc/modprobe.d/broadcom_blacklist.conf]
blacklist b43
blacklist bcma
blacklist brcmsmac
blacklist ssb

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

find: ‘/etc/pm/*.d’: No such file or directory

##### udev rules ########################

##### dmesg #############################

[   36.314060] intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2
[   36.578101] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[   36.578112] bytcr_rt5640 bytcr_rt5640: quirk realtek,jack-detect-source 3
[   36.578116] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-threshold-microamp 2000
[   36.578120] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-scale-factor 1
[   36.578124] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[   36.589854] input: bytcr-rt5640 Headset as /devices/platform/80860F28:00/bytcr_rt5640/sound/card0/input12
[   51.746999] intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2

########## wireless info END ############

Code: Select all

iw dev
iw list
iwconfig

Null
I tried to open the terminal to

Code: Select all

Su
toor
cp /sys/firmware/efi/efivars/nvram-XXXXXX /lib/firmware/brcm/brcmfmac43241b4-sdio.txt
Where XXXXXX is gess by pressing tab

But I still have no WiFi on Porteus.



To compare, this is the lspci from magic sticks Ubuntu

Code: Select all

00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0
	Kernel driver in use: iosf_mbi_pci

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0, IRQ 203
	Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
	Memory at 80000000 (32-bit, prefetchable) [size=256M]
	I/O ports at 1000 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [d0] Power Management version 2
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Vendor Specific Information: Len=07 <?>
	Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 09) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, medium devsel, latency 0, IRQ 201
	Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [70] Power Management version 2
	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
	Kernel driver in use: xhci_hcd

00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, fast devsel, latency 0, IRQ 208
	Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
	Memory at 90600000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [80] Power Management version 3
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Kernel driver in use: mei_txe

00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:14ed]
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: lpc_ich

How to get the wifi please? Should I configure settings for Kernel driver in use: i915 lpc_ich mei_txe
xhci_hcd and iosf_mbi_pci?

Cheers

[beny]

hi, better to install,if there is on repos inxi, that make a full report of your hardware, you can use a terminal and type inxi -Fxxx
https://slackware.nl/slakfinder/index.p ... e=#results

[nanZor]

I guess one thing at a time - with wifi, do you need to use rfkill to unblock it. Here's what my box shows, although it was unblocked from the start:

Code: Select all

guest@porteus:~$ sudo rfkill
Password: 
ID TYPE DEVICE      SOFT      HARD
 0 wlan phy0   unblocked unblocked

If that works, we can move on to brightness, although in other threads about red-shift, you may find an answer there with xrandr. But first, wifi!

[benjibasson]

Hi,
@beny, inxi -Fxxx show me

Code: Select all

System:
  Host: porteus.example.net Kernel: 6.8.10-porteus i686 bits: 32
    compiler: gcc v: 2.37-slack15 Desktop: Xfce 4.16.0 tk: Gtk 3.24.24
    info: xfce4-panel wm: xfwm 4.16.1 vt: 7 dm: LXDM Distro: Porteus-v5.01
Machine:
  Type: Laptop System: ASUSTeK product: T100TA v: 1.0 serial: E3N0BC20877912H
  Mobo: ASUSTeK model: T100TA v: 1.0 serial: BSN12345678901234567
    UEFI: American Megatrends v: T100TA.227 date: 02/27/2014
Battery:
  ID-1: BATC charge: 26.7 Wh (89.0%) condition: 30.0/30.6 Wh (98.1%)
    volts: 4.1 min: 3.8 model: Intel SR 1 SR Real Battery type: Li-ion
    serial: 123456789 status: Charging cycles: 223
CPU:
  Info: quad core model: Intel Atom Z3740 bits: 32 type: MCP
    smt: <unsupported> arch: Silvermont rev: 3 cache: L1: 224 KiB L2: 2 MiB
  Speed (MHz): avg: 533 min/max: 533/1866 volts: 1.2 V ext-clock: 133 MHz
    cores: 1: 533 2: 533 3: 533 4: 533 bogomips: 10666
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
    vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0f31
    class-ID: 0300
  Display: x11 server: X.org 1.20.14 compositor: xfwm4 v: 4.16.1 driver:
    loaded: modesetting unloaded: fbdev,vesa resolution: <missing: xdpyinfo>
  OpenGL: renderer: Mesa DRI Intel HD Graphics (BYT) v: 4.2 Mesa 21.3.5
    compat-v: 3.0 direct render: Yes
Audio:
  Device-1: bytcr-rt5640 driver: bytcr-rt5640
    message: bus/chip ids unavailable
  Sound Server-1: ALSA v: k6.8.10-porteus running: yes
  Sound Server-2: PulseAudio v: 15.0 running: yes
Network:
  Message: No device data found.
Drives:
  Local Storage: total: 62.09 GiB used: 13.72 GiB (22.1%)
  ID-1: /dev/mmcblk1 type: Removable vendor: SK Hynix model: HCG8e
    size: 58.25 GiB type: SSD serial: 0x0319887e rev: 0x6 scheme: GPT
  ID-2: /dev/sda type: USB vendor: PNY model: ATTACHE OPTIMA size: 3.84 GiB
    type: N/A serial: 077A139644D5 rev: PMAP scheme: MBR
Partition:
  Message: No partition data found.
Swap:
  ID-1: swap-1 type: partition size: 1.89 GiB used: 0 KiB (0.0%) priority: 1
    dev: /dev/mmcblk1p7
  ID-2: swap-2 type: zram size: 925.3 MiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 6280.4 C mobo: N/A
  Fan Speeds (RPM): cpu: 0
Info:
  Processes: 176 Uptime: 3m wakeups: 1 Memory: 1.81 GiB
  used: 942.3 MiB (50.9%) Init: SysVinit v: N/A runlevel: 4 default: 4
  Compilers: gcc: N/A Packages: note: see --pkg pkgtool: 1 Shell: Bash (su)
  v: 5.1.16 running-in: xfce4-terminal inxi: 3.3.12
 

@nanZor,

Code: Select all

guest@porteus:~$ sudo rfkill
Password: 
guest@porteus:~$ 

cheers

[beny]

hi maybe you have a key that lock the bluetooth and wifi, the nazor advice rfkill show you if you have the wifi anf bluetooth locked, try if the F2 key work after start the inxi check again.

[benjibasson]

the F2 or fn F2 doesn't work on Porteus.
whatever if bluetooth and wifi ar locked I should have

Code: Select all

  IF-ID-1: wlan0 state: down mac: 40:16:7e:92:ab:b8

instead of

Code: Select all

Network:
  Message: No device data found.

I think inxi is not accurate because on optilised ubuntu it display
Network:
Message: No device data found.
IF-ID-1: wlan0 state: up mac: 40:16:7e:92b8
althought I'm connected on my office's wifi

I think there are missing arguments of rfkill because on ubuntu it display ( whatever wlan0 is up or down )

Code: Select all

benjamin@benjamin-T100TA:~$ sudo rfkill
Usage:	rfkill [options] command
Options:
	--version	show version (0.5-1ubuntu2 (Ubuntu))
Commands:
	help
	event
	list [IDENTIFIER]
	block IDENTIFIER
	unblock IDENTIFIER
where IDENTIFIER is the index no. of an rfkill switch or one of:
	<idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc

that mean I didn't put option neither command.

[beny]

hi, if you have a mac number,you can try to use the nmcli on porteus on terminal,networkmanagercli i think you can up the device and connect to it,maybe someone have more skill with wifi devices i have only the wire connection at home or you can dig a bit on ubuntu network script,if there is something useful for porteus.

[benjibasson]

Hi, to start the wifi I have to run in terminal

Code: Select all

su
toor
modprobe brcmfmac

and nm applet show me the list of wifi and connect to know ssid

now I have to searsh how to dim screen and how to suspend-resume