What I have tried so far?
* Tried switching user by typing
Code: Select all
ctrl + alt + del
* Tried switching to another desktop environment, then switch back again to cinnamon, which is still the same.
Please help...
Code: Select all
ctrl + alt + del
1. No, my porteus is installed in a partition inside a hard drive.Ed_P wrote: ↑07 Jun 2021, 16:45Hello supertabs. Welcome.
I run Cinnamon 4.0 also and when I just tried the Menu > Logout option, for the 1st time ever, nothing happened.
So, need some more info:
1. Are you booting from a USB drive?
2. Are you booting on an EFI system?
3. Are you logged in as guest or root when you boot?
4. Why are you trying to switch user?
I did but I still came up as guest.
Code: Select all
Ctrl + Alt + Esc
Code: Select all
su
toor <<<<<<<<<<<<<<<<<< the response to the Password prompt
lspci
dmesg | grep " 0.000000]"
No, I did not. What I did is to use cheat codes to unload my default desktop environment, then load different types of desktop environment, (003-cinnamon.xzm, 003-mate.xzm, 003-lxqt.xzm, etc.)
The format is ext4.
Maybe. But I don't think so, since it works very well with lxde, lxqt and xfce? Only this mate and cinnamon, are problematic.
Code: Select all
root@porteus:/home/guest# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev e6)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:02.5 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1578
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157d
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 16)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1570
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1571
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1572
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1573
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1574
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1575
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
root@porteus:/home/guest# dmesg | grep " 0.000000]"
[ 0.000000] Linux version 4.16.3-porteus (root@) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sat Apr 21 12:42:52 Local time zone must be set--
[ 0.000000] Command line: initrd=/boot/syslinux/initrd.xz changes=/porteus noload=003-lxde load=003-cinnamon
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac2b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac2b6000-0x00000000acd49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acd4a000-0x00000000acd82fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acd83000-0x00000000ace4ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ace50000-0x00000000ae140fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae141000-0x00000000ae141fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae142000-0x00000000ae148fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae149000-0x00000000ae29ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae2a0000-0x00000000ae945fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae946000-0x00000000ae977fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae978000-0x00000000aefe8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aefe9000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: EMAXX TECHNOLOGY INC EMX-A70FM2+iCafe/EMX-A70FM2+iCafe, BIOS 4.6.5 10/05/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000024f000000 aka 9456M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ (ptrval)]
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[ 0.000000] BRK [0x01ff9000, 0x01ff9fff] PGTABLE
[ 0.000000] BRK [0x01ffa000, 0x01ffafff] PGTABLE
[ 0.000000] BRK [0x01ffb000, 0x01ffbfff] PGTABLE
[ 0.000000] BRK [0x01ffc000, 0x01ffcfff] PGTABLE
[ 0.000000] BRK [0x01ffd000, 0x01ffdfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ff35000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000ACE05080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000ACE09D60 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000ACE051A0 004BBF (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000ACE3ED80 000040
[ 0.000000] ACPI: APIC 0x00000000ACE09E70 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000ACE09EF0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000ACE09F38 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000ACE09FD8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000ACE0A018 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: UEFI 0x00000000ACE0A050 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: SSDT 0x00000000ACE0A098 0006B2 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000ACE0A750 008877 (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x00000000ACE12FC8 000310 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000ACE132D8 0016E4 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000ACE149C0 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22eff7000-0x22effafff]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ac2b5fff]
[ 0.000000] node 0: [mem 0x00000000acd4a000-0x00000000acd82fff]
[ 0.000000] node 0: [mem 0x00000000ae141000-0x00000000ae141fff]
[ 0.000000] node 0: [mem 0x00000000ae149000-0x00000000ae29ffff]
[ 0.000000] node 0: [mem 0x00000000ae946000-0x00000000ae977fff]
[ 0.000000] node 0: [mem 0x00000000aefe9000-0x00000000aeffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[ 0.000000] On node 0 totalpages: 1946670
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10963 pages used for memmap
[ 0.000000] DMA32 zone: 701584 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac2b6000-0xacd49fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacd83000-0xace4ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xace50000-0xae140fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae142000-0xae148fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae2a0000-0xae945fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae978000-0xaefe8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xaf000000-0xefffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132888 r8192 d30952 u524288
[ 0.000000] pcpu-alloc: s132888 r8192 d30952 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1916230
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: quiet initrd=/boot/syslinux/initrd.xz changes=/porteus noload=003-lxde load=003-cinnamon
[ 0.000000] Memory: 7579816K/7786680K available (8204K kernel code, 662K rwdata, 1728K rodata, 976K init, 412K bss, 206864K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
I'm impressed. Since you know how to tweak your cheatcodes you should use that approach to create a menu item that boots to root which would resolve the log out/switch user problem you were having initially.
jssouza wrote:Cinnamon 3.4.4 x64
http://www.mediafire.com/file/zxaeuzxov ... nnamon.xzm
The Problems during Cinnamon startup notifcation upon login is due to the missing gir and typelib files from NetworkManager.
Hello Ed_P!! I tried to login as root using the cheatcode login=root in cinnamon desktop environment, but still the same error appears.
Remember this? I tried to go the terminal by pressing
Code: Select all
Ctrl + Alt + F1
Code: Select all
X. Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Slackware 15.0 Slackware Linux Project
Current Operating System: Linux porteus 4.16.3-porteus #1 SMP PREEMPT Sat Apr 21 12:42:52 Local time zone must be set-- x86_64
Kernel command line: quiet initrd=/boot/syslinux/initrd.xz changes=/porteus noload=003-lxde load=003-mate login=guest
Build Date: 23 December 2017 02:12:25PM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 5 00:33:27 2017
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
/usr/bin/xauth: file /home/guest/.Xauthority does not exist
mate-session[1327]: GLib-GIO-ERROR: Setting schema 'org.mate.session' is not installed
aborting...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Server terminated successfully (0). Closing log file.
slim: opening new Log file, while another is already open
/usr/bin/xauth: file /var/run/slim.auth does not exist
I will try to use that cinnamon.xzm that you gave me. I will comeback to bring more error logs