I am looking for answers to two questions. Both are for Porteus 5.0rc2 XFCE.
The first one is important for me, the second is out of curiosity!
1. I'm looking for a working solution for OpenConnect more precisely Cisco AniConnect VPN.
In Porteus 4.0 I had built woking modules for XFCE NetworkManager with OpenConnect and PPTP, but all attempts to assemble such module for Porteus 5.0rc2 are unsuccessful
2. When inserting a USB flash drive, it takes a long time (about 20-25 sec.) before the device is available and sometimes during this period the Thunar file manager is unusable.
This is not typical only for Porteus 5.0rc2, but rather for newer kernels ver. 5.x
Looking for working VPN - Porteus 5.0rc2
- AcnapyxoB
- Samurai
- Posts: 191
- Joined: 24 Dec 2014, 10:15
- Distribution: Porteus 5.01
- Location: Planet Earth
Looking for working VPN - Porteus 5.0rc2
Last edited by AcnapyxoB on 21 Aug 2020, 04:09, edited 1 time in total.
Porteus v5.01 KDE x86_64
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Looking for working VPN - Porteus 5.0rc2
Hi AcnapyxoB,
1. Do you try to build openconnect from git https://github.com/openconnect ?
What is sources do you use for build these modules (can you write names of these modules and probably links)?
2. I use Cinnamon and don't have this issue. Need to look at Thunar in Xfce.
Cheers
1. Do you try to build openconnect from git https://github.com/openconnect ?
What is sources do you use for build these modules (can you write names of these modules and probably links)?
2. I use Cinnamon and don't have this issue. Need to look at Thunar in Xfce.
Cheers
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
- AcnapyxoB
- Samurai
- Posts: 191
- Joined: 24 Dec 2014, 10:15
- Distribution: Porteus 5.01
- Location: Planet Earth
Looking for working VPN - Porteus 5.0rc2
Blaze thanks for quick answer (as always).
In the last attempt I used NetworkManager-openconnect-1.2.4-x86_64-1alien, openconnect-7.08-x86_64-3alien and NetworkManager-vpnc-1.2.4-x86_64-2_slonly.
All from https://pkgs.org/.
Finished with a message:
About https://github.com/openconnect I'm not very good, I don't know how to build module from source!
Cheers
In the last attempt I used NetworkManager-openconnect-1.2.4-x86_64-1alien, openconnect-7.08-x86_64-3alien and NetworkManager-vpnc-1.2.4-x86_64-2_slonly.
All from https://pkgs.org/.
Finished with a message:
Interesting that almost the same solution works on Porteus 4.0 64bit XFCE.The VPN connection "ALABALA" failed to start.
The VPN service 'org.freedesktop.networkManager.openconnect' was not installed.
About https://github.com/openconnect I'm not very good, I don't know how to build module from source!
Cheers
Porteus v5.01 KDE x86_64
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Looking for working VPN - Porteus 5.0rc2
With NetworkManager-vpnc I have issue when I run ./autogen.sh
https://slackbuilds.org/repository/14.2 ... ager-vpnc/
https://github.com/NetworkManager/NetworkManager-vpnc
Any suggestion are welcome.
openconnect-8.10-x86_64-1_SBo.xzm
NetworkManager-openconnect-1.2.6-x86_64-1_SBo.xzm
vpnc-r550-x86_64-3_SBo.xzm
NetworkManager-vpnc-1.2.4-x86_64-2_slonly.xzm (old)
After activation modules, run the following commands in the terminal:
Code: Select all
checking for libnm-gtk >= 1.2.0... no
configure: error: Package requirements (libnm-gtk >= 1.2.0) were not met:
Package 'NetworkManager', required by 'libnm-gtk', not found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables LIBNM_GTK_CFLAGS
and LIBNM_GTK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
https://github.com/NetworkManager/NetworkManager-vpnc
Any suggestion are welcome.
openconnect-8.10-x86_64-1_SBo.xzm
NetworkManager-openconnect-1.2.6-x86_64-1_SBo.xzm
vpnc-r550-x86_64-3_SBo.xzm
NetworkManager-vpnc-1.2.4-x86_64-2_slonly.xzm (old)
After activation modules, run the following commands in the terminal:
Code: Select all
su
toor
useradd -u 321 -g nogroup -d /var/empty -s /bin/false nm-openconnect
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
- AcnapyxoB
- Samurai
- Posts: 191
- Joined: 24 Dec 2014, 10:15
- Distribution: Porteus 5.01
- Location: Planet Earth
Looking for working VPN - Porteus 5.0rc2
Modules activated, executed command (as root):
When try to connect same error:
Modules activated during boot, executed command from above:
when traing to connect - timeout errror.
Code: Select all
useradd -u 321 -g nogroup -d /var/empty -s /bin/false nm-openconnect
Code: Select all
The VPN connection "ALABALA" failed to start.
The VPN service 'org.freedesktop.networkManager.openconnect' was not installed.
Code: Select all
root@user:/home/guest# useradd -u 321 -g nogroup -d /var/empty -s /bin/false nm-openconnect
nscd: relocation error: nscd: symbol __nss_database_lookup2 version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
nscd: relocation error: nscd: symbol __nss_database_lookup2 version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
nscd: relocation error: nscd: symbol __nss_database_lookup2 version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
nscd: relocation error: nscd: symbol __nss_database_lookup2 version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference
root@user:/home/guest# useradd -u 321 -g nogroup -d /var/empty -s /bin/false nm-openconnect
useradd: user 'nm-openconnect' already exists
Porteus v5.01 KDE x86_64
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Looking for working VPN - Porteus 5.0rc2
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
- AcnapyxoB
- Samurai
- Posts: 191
- Joined: 24 Dec 2014, 10:15
- Distribution: Porteus 5.01
- Location: Planet Earth
Looking for working VPN - Porteus 5.0rc2
Blaze I don't know how cache-module works, but it save the situation
Tried with Cinnamon and XFCE - works for both.
Thanks!
Tried with Cinnamon and XFCE - works for both.
Thanks!
Porteus v5.01 KDE x86_64