But I can't boot Porteus. Now, if I saw that and expect answers I must know very little about how these things work, and I'd be greeted by the "We need more information before we can help with your issue," response. So, I'll detail what's happening. I use Universal USB Installer with the ISO. That goes smoothly. Then, I boot to the USB, and everything is A-OK. Then, when I attempt to boot into Graphics Mode (MATE), it won't actually boot. It will stay on the same screen. I tried all the other options. And let it automatically boot a few times to no avail. I've installed a few different Linux distros and I've only came across this issue twice. Kali, which doesn't like getting out on a USB it seems, and Porteus, which should have no problem to my understanding.
It's one of a few things. Hardware, which wouldn't surprise me, or I did something wrong, also wouldn't surprise me.
Need the hardware?
Intel Pentium 4 (3.20 GHz)
768 MB of RAM
Intel 82865G graphics controller
80 GB WD HDD 7200 RPM (Forgot the exact model)
(Ask if more is needed)
The motherboard doesn't support booting from external media, so I had to use PLoP.
Probably something simple...
Re: Probably something simple...
<removed>
Last edited by Evan on 24 Jun 2016, 11:19, edited 1 time in total.
Re: Probably something simple...
I am using Porteus 3.1Evan wrote:Are you using Porteus 3.1 or 3.2RC?
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Probably something simple...
This seems to be getting tight. I have 880 MiB and just manage to get along. Is it 768 MiB? Have 1GB RAM which comes down to 880MiB.Ceres wrote:768 MB of RAM
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
Re: Probably something simple...
It is MiB, I believe. Probably my issue then?Bogomips wrote:This seems to be getting tight. I have 880 MiB and just manage to get along. Is it 768 MiB? Have 1GB RAM which comes down to 880MiB.Ceres wrote:768 MB of RAM
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Probably something simple...
Met this when it could not boot, because vmlinuz was not there, where it was supposed to be.Staying on the same screen
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Probably something simple...
To see if it is a memory issue try booting into XFCE which you definitely have the specs to run.
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
Re: Probably something simple...
I'll try that when I have access to my computer again.brokenman wrote:To see if it is a memory issue try booting into XFCE which you definitely have the specs to run.
Bogomips wrote:vmlinuz was not there, where it was supposed to be.
Oh