I blew away the original OSX software on the hard drive, and repartitioned it. /dev/sda1 is about 6GB in size, and is formatted as FAT32. (I thought Porteus would install better on FAT32.) /dev/sda2 is formatted as ext3, and is about 48GB in size. Finally, /dev/sda3 is 2GB in size and is set up as a linux swap partition.
Here is debug.txt:
Code: Select all
evice: /dev/sda
partition: /dev/sda1
partition number: 1
partition mount point: /mnt/sda1
installation path: /mnt/sda1/boot
subfolder:
filesystem: vfat
bootloader: lilo
error code: 2
system: porteus 3.14.15-porteus i686
mount details: /dev/sda1 /mnt/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0
full partition scheme:
Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders, total 117210240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00001bae
Device Boot Start End Blocks Id System
/dev/sda1 1 117210239 58605119+ ee GPT
Code: Select all
guest@porteus:/mnt/sda1/boot$ df -h
Filesystem Size Used Avail Use% Mounted on
aufs 587M 19M 569M 4% /
devtmpfs 489M 0 489M 0% /dev
/dev/sr0 284M 284M 0 100% /mnt/sr0
/mnt/live/run 489M 1.2M 488M 1% /run
/dev/sda1 6.1G 283M 5.8G 5% /mnt/sda1
Thanks,
Jon