[SOLVED] Broadcom BCM43142 driver and Porteus V5.01
[SOLVED] Broadcom BCM43142 driver and Porteus V5.01
Hello, I am having difficulties getting the wifi driver running on my machine. I have followed a few of the guides on the website, but without success.
First I tried this advice from Slackbuilds https://slackbuilds.org/repository/15.0 ... oadcom-sta, as suggested by blaze. This failed, but I have concerns about blacklists, and whether that was done correctly.
Next I found this advice by blaze [Solved] No Wifi connection Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01), but I didn't have success. I am still concerned that possibly the drivers are not blacklisted properly. Any advice about proper blacklisting is appreciated.
Finally, I found this advice, Help with installation of Porteus from one usb(Live) to another usb (Post by Blaze #77732), but I am not totally sure how to swap the kernel. I am a newbie, and trying to figure this this out.
Thank you very much for any advice you can offer.
First I tried this advice from Slackbuilds https://slackbuilds.org/repository/15.0 ... oadcom-sta, as suggested by blaze. This failed, but I have concerns about blacklists, and whether that was done correctly.
Next I found this advice by blaze [Solved] No Wifi connection Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01), but I didn't have success. I am still concerned that possibly the drivers are not blacklisted properly. Any advice about proper blacklisting is appreciated.
Finally, I found this advice, Help with installation of Porteus from one usb(Live) to another usb (Post by Blaze #77732), but I am not totally sure how to swap the kernel. I am a newbie, and trying to figure this this out.
Thank you very much for any advice you can offer.
Last edited by csc on 25 Feb 2024, 20:19, edited 1 time in total.
- Ed_P
- Contributor
- Posts: 8374
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Broadcom BCM43142 driver and Porteus V5.01
Welcome to the forum csc.
![Yup :happy62:](./images/smilies/happy62.gif)
In your Porteus system's /porteus/base folder replace the 000-kernel.xzm file with the new 000-kernel.xzm file.
![Yup :happy62:](./images/smilies/happy62.gif)
Ed
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Broadcom BCM43142 driver and Porteus V5.01
Hi csc,.
Not bad to see:
Not bad to see:
Code: Select all
su
toor
lspci -knn | egrep 'eth|net|wir' -A6
dmesg | egrep -i 'rtl|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
[SOLVED] Broadcom BCM43142 driver and Porteus V5.01
Oh, wow, thank you. That sounds easy enough.
![Embarassed :oops:](./images/smilies/blush.gif)
One more question, in this same post, viewtopic.php?p=77732#p77732, Blaze starts out by suggesting we should download the broadcom-wl-dkms driver, and then there is a bash script. Do those two items interact? How are they related? Thanks again for your advice.
Last edited by csc on 26 Feb 2024, 02:38, edited 1 time in total.
Broadcom BCM43142 driver and Porteus V5.01
Thanks Blaze. Here is the output:
Code: Select all
root@porteus:/etc/modprobe.d# lspci -knn | egrep 'eth|net|wir' -A6
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
Subsystem: Toshiba America Info Systems Device [1179:f840]
Kernel driver in use: r8169
Kernel modules: r8169
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:f840]
Kernel driver in use: rtsx_pci
Code: Select all
root@porteus:/etc/modprobe.d# dmesg | egrep -i 'rtl|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
[ 0.000000] BIOS-provided physical RAM map:
[ 0.010612] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.011698] No NUMA configuration found
[ 0.027629] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later)
[ 0.215863] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.238191] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.244995] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.273935] libata version 3.00 loaded.
[ 0.279672] vgaarb: loaded
[ 0.282530] pnp: PnP ACPI: found 7 devices
[ 0.309693] zbud: loaded
[ 0.310101] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.330297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.345279] loop: module loaded
[ 0.368653] ehci-pci 0000:00:1d.0: debug port 2
[ 0.379324] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.379478] hub 1-0:1.0: USB hub found
[ 0.381003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.381238] hub 2-0:1.0: USB hub found
[ 0.387432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.387638] hub 3-0:1.0: USB hub found
[ 0.429817] Loaded X.509 cert 'Build time autogenerated kernel key: 1895d7f18cef999c7a74af79081e0ec76183caa2'
[ 0.432052] Btrfs loaded, zoned=no, fsverity=no
[ 0.432350] No soundcards found.
[ 0.749654] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 0.750064] hub 1-1:1.0: USB hub found
[ 0.755923] usb 2-1: New USB device found, idVendor=18d1, idProduct=4ee3, bcdDevice= 4.40
[ 1.000591] usb 2-3: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 1.197518] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2a800/0x0, board id: 3123, fw id: 1815284
[ 1.243451] usb 2-6: New USB device found, idVendor=0930, idProduct=0225, bcdDevice= 1.12
[ 1.243460] usb 2-6: Product: BCM43142A0
[ 1.243462] usb 2-6: Manufacturer: Broadcom Corp
[ 1.522801] usb 2-7: New USB device found, idVendor=04ca, idProduct=705b, bcdDevice= 0.01
[ 5.967838] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230331/exsystem-141)
[ 6.212347] r8169 0000:08:00.0 eth0: RTL8106e, 2c:60:0c:e9:b1:de, XID 449, IRQ 50
[ 6.968439] intel_rapl_common: Found RAPL domain package
[ 6.968444] intel_rapl_common: Found RAPL domain core
[ 6.968446] intel_rapl_common: Found RAPL domain uncore
[ 6.968448] intel_rapl_common: Found RAPL domain dram
[ 7.218427] usb 2-7: Found UVC 1.00 device TOSHIBA Web Camera - HD (04ca:705b)
[ 7.421048] Bluetooth: hci0: BCM: chip id 70
[ 7.422053] Bluetooth: hci0: BCM: features 0x06
[ 7.438060] Bluetooth: hci0: BCM43142A0 (001.001.011) build 0000
[ 7.469348] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 7.469352] Bluetooth: hci0: BCM: 'brcm/BCM43142A0-0930-0225.hcd'
[ 7.469354] Bluetooth: hci0: BCM: 'brcm/BCM-0930-0225.hcd'
[ 8.518410] RTL8208 Fast Ethernet r8169-0-800:00: attached PHY driver (mii_bus:phy_addr=r8169-0-800:00, irq=MAC)
[ 14.074264] Bluetooth: hci0: Opcode 0x1003 failed: -110
[ 15.605493] xfwm4[1363]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 16.188900] Bluetooth: hci0: Opcode 0x1003 failed: -110
[ 22.095705] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230331/exsystem-141)
[ 24.122281] Bluetooth: hci0: Opcode 0x1003 failed: -110
[ 63.941138] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 63.941781] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 63.941786] cfg80211: failed to load regulatory.db
[ 64.043668] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 185.304912] usb 2-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[ 5112.501087] usb 2-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40
[ 5120.839408] usb 2-1: New USB device found, idVendor=18d1, idProduct=4ee3, bcdDevice= 4.40
[15341.965489] usb 2-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40
[15356.936576] usb 2-1: New USB device found, idVendor=18d1, idProduct=4ee3, bcdDevice= 4.40
Broadcom BCM43142 driver and Porteus V5.01
hi take a look if you have the crda package installled is on the /n directory on slackware15
take a look also at bluetooth maybe you have the dual option wifi and bluetooth and they are blocked, rfkill on terminal show you if it is so
take a look also at bluetooth maybe you have the dual option wifi and bluetooth and they are blocked, rfkill on terminal show you if it is so
- ncmprhnsbl
- DEV Team
- Posts: 3941
- Joined: 20 Mar 2012, 03:42
- Distribution: v5.0-64bit
- Location: australia
- Contact:
Broadcom BCM43142 driver and Porteus V5.01
while not wrong, this is incomplete: you also must replace /boot/syslinux/vmlinuz with the new one.
fun fact: the vmlinuz is the kernel, and 000-kernel.xzm has the (kernel)modules and firmware that corresponds to that kernel.
they must match, otherwise while you can still boot, your hardware won't be much usable.
Forum Rules : https://forum.porteus.org/viewtopic.php?f=35&t=44
- Ed_P
- Contributor
- Posts: 8374
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Broadcom BCM43142 driver and Porteus V5.01
ncmprhnsbl wrote: ↑24 Feb 2024, 22:57while not wrong, this is incomplete: you also must replace /boot/syslinux/vmlinuz with the new one.
fun fact: the vmlinuz is the kernel,
![Embarassed :oops:](./images/smilies/blush.gif)
![Smile :)](./images/smilies/smile.gif)
Ed
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Broadcom BCM43142 driver and Porteus V5.01
Hi csc.
Note for me and for all =) broadcom-wl-dkms-2024-02-25
At this moment broadcom-wl-dkms and my broadcom-wl-dkms-2024-02-25 too are have:
Not sure if it work with my kernel 6.6.18 but I builded driver broadcom-wl-dkms-6.30.223.271-6.6.18-porteus-x86_64-1bl.xzm successfully.
1. Replace kernel to 6.6.18 from this tarboll 64bit-ALL-kernel6.6.18.tar
2. Copy to modules folder broadcom-wl-dkms-6.30.223.271-6.6.18-porteus-x86_64-1bl.xzm and dkms-3.0.12-x86_64-1_SBo.xzm
3. Reboot and test.
Note for me and for all =) broadcom-wl-dkms-2024-02-25
Code: Select all
#!/bin/bash
# Broadcom 802.11 Linux STA wireless driver
# Slackware build script for broadcom-wl-dkms
# base on https://www.archlinux.org/packages/community/x86_64/broadcom-wl-dkms/
# ported for Slackware by Blaze
# depends=(dkms)
PRGNAM=broadcom-wl-dkms
VERSION=${VERSION:-6.30.223.271}
SOURCE=https://docs.broadcom.com/docs-and-downloads/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
DEST=/usr/src/$PRGNAM-$VERSION
KERNEL=${KERNEL:-`uname -r`}
BUILD=${BUILD:-1}
TAG=${TAG:-bl}
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) ARCH=i586 ;;
arm*) ARCH=arm ;;
*) ARCH=$( uname -m ) ;;
esac
fi
CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}
if [ "$ARCH" = "i586" ]; then
SLKCFLAGS="-O2 -march=i586 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
SLKCFLAGS="-O2 -march=i686 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
set -e
rm -rf $PKG $TMP/$PRGNAM-$VERSION $DEST
mkdir -p $TMP $PKG $OUTPUT $TMP/$PRGNAM-$VERSION
cd /tmp/$PRGNAM
wget -q $SOURCE
cp -a *.patch *.conf *.conf.in *.install hybrid-*-nodebug-pcoem-*.tar.gz $TMP/$PRGNAM-$VERSION
cd $TMP/$PRGNAM-$VERSION
tar -xf hybrid-*-nodebug-pcoem-*.tar.gz && rm -f *.tar.gz
sed -i -e '/BRCM_WLAN_IFNAME/s/eth/wlan/' src/wl/sys/wl_linux.c
sed -i -e "/EXTRA_LDFLAGS/s|\$(src)/lib|/usr/lib${LIBDIRSUFFIX}/$PRGNAM|" Makefile
sed -e "s/@PACKAGE_VERSION@/$VERSION/" dkms.conf.in > dkms.conf
sed -n -e '/Copyright/,/SOFTWARE\./{s/^ \* //;p}' src/wl/sys/wl_linux.c
sed -i 's/get_ds()/KERNEL_DS/g' src/wl/sys/wl_iw.c
sed -i 's/get_ds()/KERNEL_DS/g' src/wl/sys/wl_cfg80211_hybrid.c
sed -i '/GE_49 :=/s|:= .*|:= 1|' Makefile
mkdir -p $DEST
install -Dm644 Makefile "$DEST/Makefile"
install -Dm644 dkms.conf "$DEST/dkms.conf"
install -Dm644 -t "$DEST/patches" *.patch
cp -a src "$DEST"
mv -f lib "$DEST/lib${LIBDIRSUFFIX}"
install -Dm644 $DEST/lib${LIBDIRSUFFIX}/wlc_hybrid.o_shipped \
"$PKG/usr/lib${LIBDIRSUFFIX}/broadcom-wl-dkms/wlc_hybrid.o_shipped"
install -Dm644 $DEST/lib${LIBDIRSUFFIX}/wlc_hybrid.o_shipped \
"/usr/lib${LIBDIRSUFFIX}/broadcom-wl-dkms/wlc_hybrid.o_shipped"
install -Dm644 broadcom-wl-dkms.conf \
"$PKG/etc/modprobe.d/broadcom-wl-dkms.conf"
dkms install --no-depmod -m broadcom-wl-dkms -v $VERSION -k `uname -r`
depmod `uname -r`
mkdir -p $PKG/lib/modules/`uname -r`/kernel/drivers/net/wireless $PKG/etc/modprobe.d $PKG/usr/lib${LIBDIRSUFFIX}/broadcom-wl-dkms
cp -a broadcom-wl-dkms.conf $PKG/etc/modprobe.d
cp -a /lib/modules/`uname -r`/kernel/drivers/net/wireless/wl.ko $PKG/lib/modules/`uname -r`/kernel/drivers/net/wireless
cp -a /usr/lib${LIBDIRSUFFIX}/broadcom-wl-dkms/wlc_hybrid.o_shipped $PKG/usr/lib${LIBDIRSUFFIX}/broadcom-wl-dkms
cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$KERNEL-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}
Code: Select all
# https://archlinux.org/packages/extra/x86_64/broadcom-wl-dkms/
001-null-pointer-fix.patch
002-rdtscl.patch
003-linux47.patch
004-linux48.patch
005-debian-fix-kernel-warnings.patch
006-linux411.patch
007-linux412.patch
008-linux415.patch
009-fix_mac_profile_discrepancy.patch
010-linux56.patch
011-linux59.patch
012-linux517.patch
013-linux518.patch
014-linux414.patch
015-linux600.patch
016-linux601.patch
1. Replace kernel to 6.6.18 from this tarboll 64bit-ALL-kernel6.6.18.tar
Code: Select all
# All operations are must to do as root user!
# replace 000-kernel.xzm
# remove crippled_sources.xzm
# optionally add 06-crippled_sources-NNN-XXbit.xzm
/path-to/porteus/base
# replace vmlinuz
/path-to/boot/syslinux
# reboot Porteus
3. Reboot and test.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Broadcom BCM43142 driver and Porteus V5.01
Blaze, that worked. Thank you so much.
Also to everyone else, thank you for teaching me how to replace the kernel, I hadn't done that before either. Thank you very much.
Just to be clear, these are the steps I followed to correct my issue:
![Yahoo :Yahoo!:](./images/smilies/yahoo.gif)
Also to everyone else, thank you for teaching me how to replace the kernel, I hadn't done that before either. Thank you very much.
Just to be clear, these are the steps I followed to correct my issue:
Blaze wrote: ↑25 Feb 2024, 11:50
1. Replace kernel to 6.6.18 from this tarboll 64bit-ALL-kernel6.6.18.tar2. Copy to modules folder broadcom-wl-dkms-6.30.223.271-6.6.18-porteus-x86_64-1bl.xzm and dkms-3.0.12-x86_64-1_SBo.xzmCode: Select all
# All operations are must to do as root user! # replace 000-kernel.xzm # remove crippled_sources.xzm # optionally add 06-crippled_sources-NNN-XXbit.xzm /path-to/porteus/base # replace vmlinuz /path-to/boot/syslinux # reboot Porteus
3. Reboot and test.