I have a problem to boot Porteus V4 on somes computers from sames USB-pendrive
General Udisk/dev
sdb2
fat32
UUID 3B09-8F02
/dev/sdb2 mounted on /dev/sdb2 on success computers
Label Porteus
flags boot, lba
Porteus V4 because Igel has 1Go ram and I need to copy2ram to ffmpeg on the smb network
On an old igel via technologie, it work fine but on an old HP ( both designed in 2012) and on other IGELs amd/intel designed in 2015-2020 it fail to boot ( more exactly it fail to find \mnt\sdb2\porteus\porteus-v4.0-x86_64.cfg because it ignore delay=20 it say from= cheatcode is incorrect ( from=3B09-8F02) because sdb2's uuid is 3B09-8F02
from=/mnt/sdb2, from=/dev/sdb2, from=/dev/sdb also say from= cheatcode is incorrect although
from cheatcode.txt v4
print cash without delay 20s (althought I have append delay=20 to searsh on all devices, only on fail PC)Examples:
'from=/dev/sdb2' will attempt to load unpacked Porteus ISO from
the second partition on your second drive.
in fact in the busybox I notice that /dev/sda internal ssd are mounted but /dev/sdb2 is not because /mnt/sdb* are all missingPorteus data not found.
You are maybe using an unsupported boot device (eg. SCSI or old PCMCIA). Workaround: Copy the directory porteus from your boot device to an IDE/SATA disk, eg. to /mnt/sda1/porteus or C:\porteus. Then try to boot again. Make sure that your boot parameters (cheatcodes) are correct. In case of booting over network check if the driver for your NIC is included in initrd image...
here is the movie of failing and success with same key at same time, same append on both X86-64 computers
https://transfert.free.fr/tERynLN
here is the dmesg for failing PC
Code: Select all
[ 0.000000] Linux version 4.16.3-porteus (root@) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sat Apr 21 12:42:52 Local time zone must be set--
[ 0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz from=3B09-8F02 delay=20 nomagic base_only norootcopy initrd=/boot/syslinux/initrd.xz
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] extended physical RAM map:
[ 0.000000] DMI: Hewlett-Packard HP ProDesk 400 G1 MT/198E, BIOS L02 v02.11 01/03/2014
[ 0.000000] found SMP MP-table at [mem 0x000f4e90-0x000f4e9f] mapped at [ (ptrval)]
[ 0.000000] No NUMA configuration found
[ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.008216] CPU: Physical Processor ID: 0
[ 0.038624] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.040080] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.054112] vgaarb: loaded
[ 0.054112] libata version 3.00 loaded.
[ 0.054112] ACPI: bus type USB registered
[ 0.054112] usbcore: registered new interface driver usbfs
[ 0.054112] usbcore: registered new interface driver hub
[ 0.054112] usbcore: registered new device driver usb
[ 0.068116] pnp: PnP ACPI: found 10 devices
[ 0.187497] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.188197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.189878] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.189916] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.191048] loop: module loaded
[ 0.194739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.194811] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.194820] ehci-pci 0000:00:1a.0: debug port 2
[ 0.205112] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.205392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.205403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.205404] usb usb1: Product: EHCI Host Controller
[ 0.205406] usb usb1: Manufacturer: Linux 4.16.3-porteus ehci_hcd
[ 0.205407] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.205589] hub 1-0:1.0: USB hub found
[ 0.205814] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.205823] ehci-pci 0000:00:1d.0: debug port 2
[ 0.215734] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.215756] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.215758] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.215759] usb usb2: Product: EHCI Host Controller
[ 0.215760] usb usb2: Manufacturer: Linux 4.16.3-porteus ehci_hcd
[ 0.215760] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.215894] hub 2-0:1.0: USB hub found
[ 0.215983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.215995] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.216080] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.217218] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.217219] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.217220] usb usb3: Product: xHCI Host Controller
[ 0.217221] usb usb3: Manufacturer: Linux 4.16.3-porteus xhci-hcd
[ 0.217222] usb usb3: SerialNumber: 0000:00:14.0
[ 0.217357] hub 3-0:1.0: USB hub found
[ 0.217817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.217839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.217840] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.217841] usb usb4: Product: xHCI Host Controller
[ 0.217842] usb usb4: Manufacturer: Linux 4.16.3-porteus xhci-hcd
[ 0.217843] usb usb4: SerialNumber: 0000:00:14.0
[ 0.217979] hub 4-0:1.0: USB hub found
[ 0.218121] usbcore: registered new interface driver uas
[ 0.218133] usbcore: registered new interface driver usb-storage
[ 0.218137] usbcore: registered new interface driver ums-alauda
[ 0.218142] usbcore: registered new interface driver ums-cypress
[ 0.218145] usbcore: registered new interface driver ums-datafab
[ 0.218149] usbcore: registered new interface driver ums_eneub6250
[ 0.218153] usbcore: registered new interface driver ums-freecom
[ 0.218156] usbcore: registered new interface driver ums-isd200
[ 0.218160] usbcore: registered new interface driver ums-jumpshot
[ 0.218164] usbcore: registered new interface driver ums-karma
[ 0.218168] usbcore: registered new interface driver ums-onetouch
[ 0.218173] usbcore: registered new interface driver ums-realtek
[ 0.218177] usbcore: registered new interface driver ums-sddr09
[ 0.218181] usbcore: registered new interface driver ums-sddr55
[ 0.218185] usbcore: registered new interface driver ums-usbat
[ 0.221584] usbcore: registered new interface driver vub300
[ 0.235886] usbcore: registered new interface driver usbhid
[ 0.235887] usbhid: USB HID core driver
[ 0.236519] No soundcards found.
[ 0.524766] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.541080] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 0.541117] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.653142] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.653148] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.653396] hub 1-1:1.0: USB hub found
[ 0.669396] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 0.669399] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.669461] usb 3-1: New USB device found, idVendor=096e, idProduct=0007
[ 0.669463] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.669465] usb 3-1: Product: HID Dongle
[ 0.669467] usb 3-1: Manufacturer: OEM
[ 0.669468] usb 3-1: SerialNumber: 10BB407880C74A
[ 0.669661] hub 2-1:1.0: USB hub found
[ 0.669716] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 0.784071] usb 3-3: new low-speed USB device number 3 using xhci_hcd
[ 0.922323] usb 3-3: New USB device found, idVendor=0461, idProduct=0010
[ 0.922329] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 0.922333] usb 3-3: Product: USB Keyboard
[ 0.929307] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0461:0010.0001/input/input5
[ 0.981361] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:14.0-3/input0
[ 0.989883] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:0461:0010.0002/input/input6
[ 1.031260] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:14.0-3/input1
[ 1.145070] usb 3-4: new low-speed USB device number 4 using xhci_hcd
[ 1.275363] usb 3-4: New USB device found, idVendor=045e, idProduct=00cb
[ 1.275369] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.275373] usb 3-4: Product: Microsoft Basic Optical Mouse v2.0
[ 1.275377] usb 3-4: Manufacturer: Microsoft
[ 1.279149] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:045E:00CB.0003/input/input7
[ 1.279615] hid-generic 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-4/input0
[ 1.393070] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[ 6.738068] usb 3-7: device descriptor read/64, error -110
[ 6.966513] usb 3-7: New USB device found, idVendor=abcd, idProduct=1234
[ 6.966517] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.966519] usb 3-7: Product: UDisk
[ 6.966521] usb 3-7: Manufacturer: General
[ 6.966522] usb 3-7: SerialNumber: Љ
[ 6.966952] usb-storage 3-7:1.0: USB Mass Storage device detected
[ 6.968091] scsi host6: usb-storage 3-7:1.0
[ 8.032939] sd 6:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[ 8.033054] sd 6:0:0:0: [sdb] Write Protect is off
[ 8.033055] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 8.033173] sd 6:0:0:0: [sdb] No Caching mode page found
[ 8.033175] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 8.084332] sdb: sdb1 sdb2
[ 8.084979] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 61.279067] usb 3-4: USB disconnect, device number 4
[ 62.759076] usb 3-4: new low-speed USB device number 6 using xhci_hcd
[ 62.889326] usb 3-4: New USB device found, idVendor=045e, idProduct=00cb
[ 62.889333] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 62.889337] usb 3-4: Product: Microsoft Basic Optical Mouse v2.0
[ 62.889341] usb 3-4: Manufacturer: Microsoft
[ 62.893112] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:045E:00CB.0004/input/input8
[ 62.893568] hid-generic 0003:045E:00CB.0004: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-4/input0here is lspci -knn
Code: Select all
00:1f.3 Class 0c05: 8086:8c22
00:00.0 Class 0600: 8086:0c00 hsw_uncore
00:1a.0 Class 0c03: 8086:8c2d ehci-pci
00:1d.0 Class 0c03: 8086:8c26 ehci-pci
00:02.0 Class 0300: 8086:0402
00:14.0 Class 0c03: 8086:8c31 xhci_hcd
00:1c.2 Class 0604: 8086:8c14 pcieport
00:1f.2 Class 0106: 8086:8c02 ahci
00:1c.0 Class 0604: 8086:8c10 pcieport
00:1f.0 Class 0601: 8086:8c5c
02:00.0 Class 0200: 10ec:8168
00:16.0 Class 0780: 8086:8c3a
00:1b.0 Class 0403: 8086:8c20cheers
