-took usb 2 formated fat32 and copied the content of the iso (boot and porteus) to the usb
-ran windows installer as admin
-booted into porteus
-inserted a new usb 2 drive and formated it ext4
-copied the boot and porteus on to the new usb drive
-in the porteus terminal went to /mnt/sdb/boot and executed the sh script(Porteus-installer-for-Linux.com)
-got an error - Installation failed with error code `1'
So, my porteus install runs fine if i use windows install method , but I do want to run porteus from the usb with linux install so i dont have to create .dat containers for saving changes.
New to porteus. Pleasae advise. Thanks.
debug text:
partition: /dev/sdb
partition mount point: /mnt/sdb
installation path: /mnt/sdb/boot
filesystem: ext4
bootloader: lilo
error code: 1
system: porteus.example.net 5.18.8-porteus x86_64
mount details: /dev/sdb /mnt/sdb ext4 rw,relatime 0 0
full partition scheme:
Disk /dev/loop0: 74.39 MiB, 78004224 bytes, 152352 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 121.59 MiB, 127496192 bytes, 249016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 111.49 MiB, 116903936 bytes, 228328 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 17.46 MiB, 18309120 bytes, 35760 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 13.7 MiB, 14368768 bytes, 28064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/nvme0n1: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: SAMSUNG MZVLB256HBHQ-000L7
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Disk /dev/sda: 14.32 GiB, 15376318464 bytes, 30031872 sectors
Disk model: Cruzer Blade
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7bbd8062
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 30031871 30029824 14.3G c W95 FAT32 (LBA)
Disk /dev/sdb: 14.32 GiB, 15376318464 bytes, 30031872 sectors
Disk model: Cruzer Blade
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes