[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm)
[4.19.130] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel4.19.130.tar (87 M)
http://www.mediafire.com/file/luvinhn3s ... 19.130.tar
19fce15377180e911fe5f69ae9c0d7dc 64bit-ALL-kernel4.19.130.tar
[5.4.50] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.4.50.tar (92 M)
http://www.mediafire.com/file/0dpxneb1q ... 5.4.50.tar
db58825148a089f82d520537609d4b8e 64bit-ALL-kernel5.4.50.tar
Note : Compiler that was used.
for kernel 4.19.130 and 5.4.50: gcc-10.1.0-x86_64
Porteus Kernel Builder
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
Confused. 5.4.50!! I thought the tend was upward like 5.7.2 and 5.7.6. And I have no idea what 4.19.130 is for.Ed
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
4.19.130 for kushagratandon with his Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Help with installation of Porteus from one usb(Live) to another usb (Пост Blaze #77714)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
You're a good man Blaze.
Added in 1 day 12 hours 3 minutes 8 seconds:
Not seeing the "buggy seq_file .next function 0xffffffff81152e71 did not updated position index" error any more.
But seeing a new one.
Code: Select all
guest@porteus:~$ dmesg
[ 0.000000] Linux version 5.4.50-porteus (root@porteus) (gcc version 10.1.0 (GCC)) #1 SMP Wed Jul 1 14:48:01 UTC 2020
:
:
:
:
[16925.565235] xed[13046]: segfault at 7f2e7dc3ad40 ip 00007f2e911ba9c4 sp 00007ffe0981d370 error 4 in libglib-2.0.so.0.6400.3[7f2e91188000+7f000]
[16925.565244] Code: 44 24 08 48 85 c0 74 03 44 89 28 31 c0 85 db 0f 9f c0 48 83 c4 48 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 1f 44 00 00 48 8b 41 10 <48> 8b 00 48 85 c0 0f 84 90 00 00 00 41 83 46 58 01 4c 89 f7 48 89
[18978.335617] ACPI Error: Thread 1567270848 cannot release Mutex [PATM] acquired by thread 2307805056 (20190816/exmutex-378)
[18978.335624] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[18980.762371] ACPI Error: Cannot release Mutex [PATM], not acquired (20190816/exmutex-357)
[18980.762419] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_MUTEX_NOT_ACQUIRED) (20190816/psparse-529)
[18992.499020] ACPI Error: Thread 1591148544 cannot release Mutex [PATM] acquired by thread 756273024 (20190816/exmutex-378)
[18992.499037] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[18992.938154] ACPI Error: Cannot release Mutex [PATM], not acquired (20190816/exmutex-357)
[18992.938166] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_MUTEX_NOT_ACQUIRED) (20190816/psparse-529)
[18995.913974] ACPI Error: Thread 756273024 cannot release Mutex [PATM] acquired by thread 1032752448 (20190816/exmutex-378)
[18995.913984] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[18996.899900] ACPI Error: Thread 2307805056 cannot release Mutex [PATM] acquired by thread 1567281024 (20190816/exmutex-378)
[18996.899906] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[18997.140647] ACPI Error: Thread 1032752448 cannot release Mutex [PATM] acquired by thread 1567281024 (20190816/exmutex-378)
[18997.140667] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[18997.570169] ACPI Error: Cannot release Mutex [PATM], not acquired (20190816/exmutex-357)
[18997.570183] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_MUTEX_NOT_ACQUIRED) (20190816/psparse-529)
[18998.111641] ACPI Error: Thread 1591148544 cannot release Mutex [PATM] acquired by thread 756273024 (20190816/exmutex-378)
[18998.111658] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[19696.837865] ACPI Error: Thread 1567281024 cannot release Mutex [PATM] acquired by thread 756266240 (20190816/exmutex-378)
[19696.837874] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
[19822.370674] ACPI Error: Thread 1591148544 cannot release Mutex [PATM] acquired by thread 756273024 (20190816/exmutex-378)
[19822.370683] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190816/psparse-529)
And the kernel eats the battery when the lid is closed.
Ed
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
Probably it's time for update BIOS 
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
I don't have a problem with this one.
Code: Select all
guest@porteus:~$ dmesg
[ 0.000000] Linux version 4.16.3-porteus (root@) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sat Apr 21 12:42:52 Local time zone must be set--
Ed
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
Ed_P, when you power on and at the boot up stage of Porteus do you see ACPI Error at black screen?
these errors are related to bios. Welcome to this topic How to update intel-microcode (Пост Blaze #65750)
On old kernels, I also did not have errors with ACPI, but now is have:
Code: Select all
[ 0.629094] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.629194] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.630891] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.630991] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.635642] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.635742] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.637074] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.637174] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.637744] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.637853] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.645420] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.645520] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.647298] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.647648] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 0.648530] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
[ 0.648902] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-529)Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
No. But I will recheck.
Even when the machine boots EFI?these errors are related to bios. Welcome to this topic How to update intel-microcode (Пост Blaze #65750)
Ed
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
On my PC with UEFI is the same.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
I rebooted and watched the screen and no ACPI Error messages.
Code: Select all
guest@porteus:~$ dmesg
[ 0.000000] Linux version 5.4.50-porteus (root@porteus) (gcc version 10.1.0 (GCC)) #1 SMP Wed Jul 1 14:48:01 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/porteus5.0/rc2ISOModules/NEW5.0rc2preview-64bit-20200702-5.4.50.iso volume=33 reboot=cold extramod=/porteus5.0/Modules;/porteus5.0/rc2Modules noload=xfce;menu4
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a0335fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a0336000-0x00000000a0336fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a0337000-0x00000000a0360fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0361000-0x00000000a03b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a03b7000-0x00000000a0b17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0b18000-0x00000000a8390fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a8391000-0x00000000a86f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a86f4000-0x00000000a8728fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a8729000-0x00000000a8ee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a8ee3000-0x00000000a948dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a948e000-0x00000000a94fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000a94fe000-0x00000000a94fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a9500000-0x00000000a95fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xa86fe000 ACPI 2.0=0xa86fe000 SMBIOS=0xf0000 ESRT=0xa9250598
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 13-5368/0DF2PV, BIOS 1.19.0 12/12/2018
[ 0.000000] tsc: Detected 2300.000 MHz processor
[ 0.002522] tsc: Detected 2299.968 MHz TSC
[ 0.002522] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002524] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002532] last_pfn = 0x14f800 max_arch_pfn = 0x400000000
[ 0.002535] MTRR default type: write-back
[ 0.002536] MTRR fixed ranges enabled:
[ 0.002537] 00000-9FFFF write-back
[ 0.002538] A0000-BFFFF uncachable
[ 0.002539] C0000-FFFFF write-protect
[ 0.002539] MTRR variable ranges enabled:
[ 0.002541] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.002542] 1 base 00B0000000 mask 7FF0000000 uncachable
[ 0.002542] 2 base 00AC000000 mask 7FFC000000 uncachable
[ 0.002543] 3 base 00AB000000 mask 7FFF000000 uncachable
[ 0.002544] 4 disabled
[ 0.002544] 5 disabled
[ 0.002545] 6 disabled
[ 0.002545] 7 disabled
[ 0.002545] 8 disabled
[ 0.002546] 9 disabled
[ 0.003054] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003178] last_pfn = 0xa94ff max_arch_pfn = 0x400000000
[ 0.010619] esrt: Reserving ESRT space from 0x00000000a9250598 to 0x00000000a92505d0.
[ 0.010626] Using GB pages for direct mapping
[ 0.011487] Secure boot could not be determined
[ 0.011488] RAMDISK: [mem 0x37e5d000-0x37f25fff]
[ 0.011497] ACPI: Early table checksum verification disabled
[ 0.011499] ACPI: RSDP 0x00000000A86FE000 000024 (v02 DELL )
[ 0.011503] ACPI: XSDT 0x00000000A86FE0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011507] ACPI: FACP 0x00000000A871DAB0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.011512] ACPI: DSDT 0x00000000A86FE230 01F87E (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.011515] ACPI: FACS 0x00000000A8EE0F80 000040
[ 0.011517] ACPI: APIC 0x00000000A871DBC0 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.011519] ACPI: FPDT 0x00000000A871DC48 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011522] ACPI: FIDT 0x00000000A871DC90 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011524] ACPI: MCFG 0x00000000A871DD30 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.011526] ACPI: HPET 0x00000000A871DD70 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.011529] ACPI: SSDT 0x00000000A871DDA8 0003DA (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.011531] ACPI: LPIT 0x00000000A871E188 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.011534] ACPI: SSDT 0x00000000A871E220 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.011537] ACPI: SSDT 0x00000000A871E468 000E9E (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.011539] ACPI: SSDT 0x00000000A871F308 000707 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.011542] ACPI: DBGP 0x00000000A871FA10 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.011544] ACPI: DBG2 0x00000000A871FA48 000061 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.011546] ACPI: SSDT 0x00000000A871FAB0 000B07 (v02 INTEL xh_OEMBD 00000000 INTL 20120913)
[ 0.011549] ACPI: BOOT 0x00000000A87205B8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011551] ACPI: SSDT 0x00000000A87205E0 00368B (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.011554] ACPI: UEFI 0x00000000A8723C70 000042 (v01 00000000 00000000)
[ 0.011557] ACPI: SSDT 0x00000000A8723CB8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.011559] ACPI: MSDM 0x00000000A8724B30 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.011561] ACPI: SSDT 0x00000000A8724B88 00374A (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.011564] ACPI: SLIC 0x00000000A87282D8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.011567] ACPI: BGRT 0x00000000A8728450 000038 (v00 ??\xf3\xaa 01072009 AMI 00010013)
[ 0.011569] ACPI: DMAR 0x00000000A8728488 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.011572] ACPI: NHLT 0x00000000A8728578 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.011574] ACPI: TPM2 0x00000000A87285A8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.011582] ACPI: Local APIC address 0xfee00000
[ 0.011593] No NUMA configuration found
[ 0.011594] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
[ 0.011597] NODE_DATA(0) allocated [mem 0x14f7f9000-0x14f7fcfff]
[ 0.011610] Zone ranges:
[ 0.011611] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011612] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011613] Normal [mem 0x0000000100000000-0x000000014f7fffff]
[ 0.011614] Movable zone start for each node
[ 0.011615] Early memory node ranges
[ 0.011616] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.011617] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.011617] node 0: [mem 0x0000000000100000-0x00000000a0335fff]
[ 0.011618] node 0: [mem 0x00000000a0361000-0x00000000a03b6fff]
[ 0.011619] node 0: [mem 0x00000000a0b18000-0x00000000a8390fff]
[ 0.011620] node 0: [mem 0x00000000a94fe000-0x00000000a94fefff]
[ 0.011621] node 0: [mem 0x0000000100000000-0x000000014f7fffff]
[ 0.012110] Zeroed struct page in unavailable ranges: 35935 pages
[ 0.012112] Initmem setup node 0 [mem 0x0000000000001000-0x000000014f7fffff]
[ 0.012113] On node 0 totalpages: 1012641
[ 0.012114] DMA zone: 64 pages used for memmap
[ 0.012115] DMA zone: 22 pages reserved
[ 0.012116] DMA zone: 3995 pages, LIFO batch:0
[ 0.012194] DMA32 zone: 10673 pages used for memmap
[ 0.012195] DMA32 zone: 683014 pages, LIFO batch:63
[ 0.024513] Normal zone: 5088 pages used for memmap
[ 0.024514] Normal zone: 325632 pages, LIFO batch:63
[ 0.029214] Reserving Intel graphics memory at [mem 0xab800000-0xaf7fffff]
[ 0.029538] ACPI: PM-Timer IO Port: 0x1808
[ 0.029539] ACPI: Local APIC address 0xfee00000
[ 0.029544] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.029545] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.029545] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.029546] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.029578] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.029580] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.029581] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.029583] ACPI: IRQ0 used by override.
[ 0.029584] ACPI: IRQ9 used by override.
[ 0.029586] Using ACPI (MADT) for SMP configuration information
[ 0.029587] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.029590] TSC deadline timer available
[ 0.029591] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.029596] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.029598] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.029599] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.029599] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.029601] PM: Registered nosave memory: [mem 0xa0336000-0xa0336fff]
[ 0.029601] PM: Registered nosave memory: [mem 0xa0337000-0xa0360fff]
[ 0.029602] PM: Registered nosave memory: [mem 0xa03b7000-0xa0b17fff]
[ 0.029603] PM: Registered nosave memory: [mem 0xa8391000-0xa86f3fff]
[ 0.029604] PM: Registered nosave memory: [mem 0xa86f4000-0xa8728fff]
[ 0.029605] PM: Registered nosave memory: [mem 0xa8729000-0xa8ee2fff]
[ 0.029605] PM: Registered nosave memory: [mem 0xa8ee3000-0xa948dfff]
[ 0.029606] PM: Registered nosave memory: [mem 0xa948e000-0xa94fdfff]
[ 0.029607] PM: Registered nosave memory: [mem 0xa94ff000-0xa94fffff]
[ 0.029608] PM: Registered nosave memory: [mem 0xa9500000-0xa95fffff]
[ 0.029608] PM: Registered nosave memory: [mem 0xa9600000-0xab7fffff]
[ 0.029609] PM: Registered nosave memory: [mem 0xab800000-0xaf7fffff]
[ 0.029610] PM: Registered nosave memory: [mem 0xaf800000-0xdfffffff]
[ 0.029610] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.029611] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.029612] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.029612] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.029613] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.029613] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.029614] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.029615] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.029615] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.029617] [mem 0xaf800000-0xdfffffff] available for PCI devices
[ 0.029621] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.104228] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.104508] percpu: Embedded 42 pages/cpu s132952 r8192 d30888 u524288
[ 0.104513] pcpu-alloc: s132952 r8192 d30888 u524288 alloc=1*2097152
[ 0.104514] pcpu-alloc: [0] 0 1 2 3
[ 0.104530] Built 1 zonelists, mobility grouping on. Total pages: 996794
[ 0.104531] Policy zone: Normal
[ 0.104533] Kernel command line: quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/porteus5.0/rc2ISOModules/NEW5.0rc2preview-64bit-20200618-5.4.50.iso volume=33 reboot=cold extramod=/porteus5.0/Modules;/porteus5.0/rc2Modules noload=xfce;menu4
[ 0.105017] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.105229] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.105268] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.129936] Memory: 3816548K/4050564K available (10243K kernel code, 680K rwdata, 1936K rodata, 992K init, 2208K bss, 234016K reserved, 0K cma-reserved)
[ 0.129990] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.129997] Kernel/User page tables isolation: enabled
[ 0.130049] rcu: Hierarchical RCU implementation.
[ 0.130049] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.130051] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.130051] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.130076] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.130496] spurious 8259A interrupt: IRQ7.
[ 0.130521] Console: colour dummy device 80x25
[ 0.130525] printk: console [tty0] enabled
[ 0.130534] ACPI: Core revision 20190816
[ 0.130804] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.130909] APIC: Switch to symmetric I/O mode setup
[ 0.130911] DMAR: Host address width 39
[ 0.130912] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.130919] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.130920] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.130924] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.130925] DMAR: RMRR base: 0x000000a8496000 end: 0x000000a84b5fff
[ 0.130926] DMAR: RMRR base: 0x000000ab000000 end: 0x000000af7fffff
[ 0.130927] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.130928] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.130930] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.130931] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.131575] DMAR: DRHD: handling fault status reg 2
[ 0.131581] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.132933] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.136941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.141869] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns
[ 0.141875] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=2299968)
[ 0.141877] pid_max: default: 32768 minimum: 301
[ 0.144928] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.144941] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.144953] *** VALIDATE tmpfs ***
[ 0.145066] *** VALIDATE proc ***
[ 0.145091] *** VALIDATE cgroup1 ***
[ 0.145093] *** VALIDATE cgroup2 ***
[ 0.145153] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.145170] process: using mwait in idle threads
[ 0.145173] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.145173] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.145176] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.145178] Spectre V2 : Mitigation: Full generic retpoline
[ 0.145179] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.145179] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.145181] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.145181] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.145183] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.145185] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.145186] SRBDS: Vulnerable: No microcode
[ 0.145186] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.145471] Freeing SMP alternatives memory: 12K
[ 0.145941] smpboot: CPU0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.146011] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.146018] ... version: 4
[ 0.146019] ... bit width: 48
[ 0.146019] ... generic registers: 4
[ 0.146020] ... value mask: 0000ffffffffffff
[ 0.146021] ... max period: 00007fffffffffff
[ 0.146021] ... fixed-purpose events: 3
[ 0.146022] ... event mask: 000000070000000f
[ 0.146060] rcu: Hierarchical SRCU implementation.
[ 0.146115] smp: Bringing up secondary CPUs ...
[ 0.146171] x86: Booting SMP configuration:
[ 0.146172] .... node #0, CPUs: #1 #2
[ 0.146994] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.146994] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.146994] #3
[ 0.147472] smp: Brought up 1 node, 4 CPUs
[ 0.147472] smpboot: Max logical packages: 1
[ 0.147472] smpboot: Total of 4 processors activated (18399.74 BogoMIPS)
[ 0.148040] devtmpfs: initialized
[ 0.148040] random: get_random_u32 called from 0xffffffff812f8870 with crng_init=0
[ 0.148040] PM: Registering ACPI NVS region [mem 0xa0336000-0xa0336fff] (4096 bytes)
[ 0.148040] PM: Registering ACPI NVS region [mem 0xa8729000-0xa8ee2fff] (8101888 bytes)
[ 0.148050] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.148053] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.148090] pinctrl core: initialized pinctrl subsystem
[ 0.148226] NET: Registered protocol family 16
[ 0.148391] cpuidle: using governor ladder
[ 0.148391] cpuidle: using governor menu
[ 0.148894] Simple Boot Flag at 0x47 set to 0x80
[ 0.148908] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.148909] ACPI: bus type PCI registered
[ 0.148910] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148964] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.148966] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.148977] PCI: Using configuration type 1 for base access
[ 0.149140] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.150946] ACPI: Added _OSI(Module Device)
[ 0.150947] ACPI: Added _OSI(Processor Device)
[ 0.150948] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.150949] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.150950] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.150951] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.150952] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.180609] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.183256] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.189922] ACPI: Dynamic OEM Table Load:
[ 0.189928] ACPI: SSDT 0xFFFF88814A294000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.191185] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.191871] ACPI: Dynamic OEM Table Load:
[ 0.191871] ACPI: SSDT 0xFFFF88814A2E0800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.194092] ACPI: Dynamic OEM Table Load:
[ 0.194097] ACPI: SSDT 0xFFFF88814A295000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.195565] ACPI: Dynamic OEM Table Load:
[ 0.195569] ACPI: SSDT 0xFFFF88814A231E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.199289] ACPI: EC: EC started
[ 0.199290] ACPI: EC: interrupt blocked
[ 0.202006] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.202008] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.202009] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.202010] ACPI: Interpreter enabled
[ 0.202044] ACPI: (supports S0 S3 S4 S5)
[ 0.202045] ACPI: Using IOAPIC for interrupt routing
[ 0.202078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.202619] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.204029] ACPI: Power Resource [PG00] (on)
[ 0.204339] ACPI: Power Resource [PG01] (on)
[ 0.204623] ACPI: Power Resource [PG02] (on)
[ 0.205159] ACPI: Power Resource [WRST] (off)
[ 0.205457] ACPI: Power Resource [WRST] (off)
[ 0.205752] ACPI: Power Resource [WRST] (off)
[ 0.206049] ACPI: Power Resource [WRST] (off)
[ 0.206345] ACPI: Power Resource [WRST] (off)
[ 0.206638] ACPI: Power Resource [WRST] (off)
[ 0.206925] ACPI: Power Resource [WRST] (off)
[ 0.207219] ACPI: Power Resource [WRST] (off)
[ 0.207513] ACPI: Power Resource [WRST] (off)
[ 0.208022] ACPI: Power Resource [WRST] (off)
[ 0.208325] ACPI: Power Resource [WRST] (off)
[ 0.208622] ACPI: Power Resource [WRST] (off)
[ 0.208920] ACPI: Power Resource [WRST] (off)
[ 0.209214] ACPI: Power Resource [WRST] (off)
[ 0.209506] ACPI: Power Resource [WRST] (off)
[ 0.209798] ACPI: Power Resource [WRST] (off)
[ 0.210093] ACPI: Power Resource [WRST] (off)
[ 0.210388] ACPI: Power Resource [WRST] (off)
[ 0.210682] ACPI: Power Resource [WRST] (off)
[ 0.210978] ACPI: Power Resource [WRST] (off)
[ 0.222793] ACPI: Power Resource [FN00] (off)
[ 0.222894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.222899] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.224489] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
[ 0.224490] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.225028] PCI host bridge to bus 0000:00
[ 0.225031] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.225032] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.225033] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.225034] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.225035] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.225036] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.225038] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.225039] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.225040] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.225041] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.225042] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.225043] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.225044] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.225045] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.225046] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xdfffffff window]
[ 0.225047] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.225049] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.225060] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.225191] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.225203] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.225210] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.225215] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.225232] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.225366] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.225381] pci 0000:00:04.0: reg 0x10: [mem 0xd1120000-0xd1127fff 64bit]
[ 0.225590] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000
[ 0.225615] pci 0000:00:13.0: reg 0x10: [mem 0xd1139000-0xd1139fff 64bit]
[ 0.225807] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.225832] pci 0000:00:14.0: reg 0x10: [mem 0xd1110000-0xd111ffff 64bit]
[ 0.225914] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.226052] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.226075] pci 0000:00:14.2: reg 0x10: [mem 0xd1138000-0xd1138fff 64bit]
[ 0.226252] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.226282] pci 0000:00:15.0: reg 0x10: [mem 0xd1137000-0xd1137fff 64bit]
[ 0.226503] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.226534] pci 0000:00:15.1: reg 0x10: [mem 0xd1136000-0xd1136fff 64bit]
[ 0.226772] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.226800] pci 0000:00:16.0: reg 0x10: [mem 0xd1135000-0xd1135fff 64bit]
[ 0.227884] pci 0000:00:16.0: PME# supported from D3hot
[ 0.228000] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.228021] pci 0000:00:17.0: reg 0x10: [mem 0xd1130000-0xd1131fff]
[ 0.228029] pci 0000:00:17.0: reg 0x14: [mem 0xd1134000-0xd11340ff]
[ 0.228038] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.228046] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.228054] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.228062] pci 0000:00:17.0: reg 0x24: [mem 0xd1133000-0xd11337ff]
[ 0.228112] pci 0000:00:17.0: PME# supported from D3hot
[ 0.228259] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.228369] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.228576] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.228818] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.228834] pci 0000:00:1f.2: reg 0x10: [mem 0xd112c000-0xd112ffff]
[ 0.228834] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.228834] pci 0000:00:1f.3: reg 0x10: [mem 0xd1128000-0xd112bfff 64bit]
[ 0.228834] pci 0000:00:1f.3: reg 0x20: [mem 0xd1100000-0xd110ffff 64bit]
[ 0.228834] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.228834] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.228834] pci 0000:00:1f.4: reg 0x10: [mem 0xd1132000-0xd11320ff 64bit]
[ 0.228834] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.228989] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
[ 0.229087] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1001fff 64bit]
[ 0.229413] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.230056] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.230061] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
[ 0.233140] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233201] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.233261] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233319] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233378] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233494] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.233552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235878] ACPI: EC: interrupt unblocked
[ 0.235878] ACPI: EC: event unblocked
[ 0.235880] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.235880] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.235880] iommu: Default domain type: Translated
[ 0.235883] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.235883] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.235885] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.235886] vgaarb: loaded
[ 0.236032] SCSI subsystem initialized
[ 0.236032] libata version 3.00 loaded.
[ 0.236032] ACPI: bus type USB registered
[ 0.236032] usbcore: registered new interface driver usbfs
[ 0.236032] usbcore: registered new interface driver hub
[ 0.236032] usbcore: registered new device driver usb
[ 0.236032] mc: Linux media interface: v0.10
[ 0.236032] videodev: Linux video capture interface: v2.00
[ 0.236032] pps_core: LinuxPPS API ver. 1 registered
[ 0.236032] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.236032] PTP clock support registered
[ 0.236032] Registered efivars operations
[ 0.236032] Advanced Linux Sound Architecture Driver Initialized.
[ 0.236032] PCI: Using ACPI for IRQ routing
[ 0.265011] PCI: pci_cache_line_size set to 64 bytes
[ 0.265376] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.265377] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.265378] e820: reserve RAM buffer [mem 0xa0336000-0xa3ffffff]
[ 0.265380] e820: reserve RAM buffer [mem 0xa03b7000-0xa3ffffff]
[ 0.265381] e820: reserve RAM buffer [mem 0xa8391000-0xabffffff]
[ 0.265382] e820: reserve RAM buffer [mem 0xa94ff000-0xabffffff]
[ 0.265384] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
[ 0.265528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.265531] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.267887] clocksource: Switched to clocksource tsc-early
[ 0.267890] *** VALIDATE bpf ***
[ 0.267933] *** VALIDATE ramfs ***
[ 0.267943] pnp: PnP ACPI init
[ 0.268145] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.268147] system 00:00: [io 0xffff] has been reserved
[ 0.268148] system 00:00: [io 0xffff] has been reserved
[ 0.268149] system 00:00: [io 0xffff] has been reserved
[ 0.268151] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.268152] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.268156] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268235] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268269] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.268273] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.268457] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.268473] pnp 00:04: Plug and Play ACPI device, IDs SYN0609 PNP0f13 (active)
[ 0.268658] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.268660] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.268661] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.268662] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.268664] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.268665] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.268667] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.268668] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.268670] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.268671] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.268674] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268714] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.268715] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.268717] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.268719] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.268720] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.268722] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.268723] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.268726] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268963] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.268966] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269934] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.269936] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.269937] system 00:08: [mem 0xfe035000-0xfe035fff] has been reserved
[ 0.269938] system 00:08: [mem 0xfe034008-0xfe034fff] has been reserved
[ 0.269941] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270384] system 00:09: [mem 0xfe034000-0xfe034007] has been reserved
[ 0.270387] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272975] pnp: PnP ACPI: found 10 devices
[ 0.274025] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.274026] thermal_sys: Registered thermal governor 'step_wise'
[ 0.274027] thermal_sys: Registered thermal governor 'user_space'
[ 0.278563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.278599] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.278610] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
[ 0.278618] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.278619] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.278621] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.278622] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.278623] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.278624] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.278625] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.278626] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.278627] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.278628] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.278629] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.278631] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.278632] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.278633] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.278634] pci_bus 0000:00: resource 18 [mem 0xaf800000-0xdfffffff window]
[ 0.278635] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.278637] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd10fffff]
[ 0.278760] NET: Registered protocol family 2
[ 0.278862] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.278870] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.278922] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.279021] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.279045] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.279058] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.279095] NET: Registered protocol family 1
[ 0.279109] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.279784] PCI: CLS 0 bytes, default 64
[ 0.279812] Unpacking initramfs...
[ 0.375198] Freeing initrd memory: 804K
[ 0.375222] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 0.375225] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 0.375261] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.375263] software IO TLB: mapped [mem 0xa1347000-0xa5347000] (64MB)
[ 0.375744] Initialise system trusted keyrings
[ 0.375768] workingset: timestamp_bits=56 max_order=20 bucket_order=0
[ 0.377210] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.377237] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.377281] fuse: init (API version 7.31)
[ 0.377290] *** VALIDATE fuse ***
[ 0.377291] *** VALIDATE fuse ***
[ 0.377330] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.377687] aufs 5.4-20200622
[ 0.381229] Key type asymmetric registered
[ 0.381230] Asymmetric key parser 'x509' registered
[ 0.381236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.381548] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.381643] efifb: probing for efifb
[ 0.381655] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 0.381656] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.381657] efifb: scrolling: redraw
[ 0.381658] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.381733] Console: switching to colour frame buffer device 128x48
[ 0.383411] fb0: EFI VGA frame buffer device
[ 0.383418] intel_idle: MWAIT substates: 0x11142120
[ 0.383419] intel_idle: v0.4.1 model 0x4E
[ 0.383647] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.385939] ACPI: AC Adapter [AC] (off-line)
[ 0.386006] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.386033] ACPI: Lid Switch [LID0]
[ 0.386061] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.386082] ACPI: Power Button [PBTN]
[ 0.386108] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.386122] ACPI: Sleep Button [SBTN]
[ 0.386150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.386168] ACPI: Power Button [PWRF]
[ 0.388004] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.388005] ACPI: Thermal Zone [THM] (25 C)
[ 0.388146] ACPI: Invalid active1 threshold
[ 0.388215] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.388215] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.388323] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.388324] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.389167] Linux agpgart interface v0.103
[ 0.390990] loop: module loaded
[ 0.391161] usbcore: registered new interface driver rtsx_usb
[ 0.391568] ahci 0000:00:17.0: version 3.0
[ 0.391758] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 0.391823] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.391826] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.392407] scsi host0: ahci
[ 0.392524] scsi host1: ahci
[ 0.392568] ata1: SATA max UDMA/133 abar m2048@0xd1133000 port 0xd1133100 irq 123
[ 0.392570] ata2: SATA max UDMA/133 abar m2048@0xd1133000 port 0xd1133180 irq 123
[ 0.393032] Fusion MPT base driver 3.04.20
[ 0.393033] Copyright (c) 1999-2008 LSI Corporation
[ 0.393036] Fusion MPT SPI Host driver 3.04.20
[ 0.393046] Fusion MPT SAS Host driver 3.04.20
[ 0.393059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.393060] ehci-pci: EHCI PCI platform driver
[ 0.393067] ehci-platform: EHCI generic platform driver
[ 0.393079] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.393082] ohci-pci: OHCI PCI platform driver
[ 0.393090] ohci-platform: OHCI generic platform driver
[ 0.393096] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.393261] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.393266] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.394424] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 0.394775] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.395053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.395055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.395056] usb usb1: Product: xHCI Host Controller
[ 0.395057] usb usb1: Manufacturer: Linux 5.4.50-porteus xhci-hcd
[ 0.395059] usb usb1: SerialNumber: 0000:00:14.0
[ 0.395198] hub 1-0:1.0: USB hub found
[ 0.395218] hub 1-0:1.0: 12 ports detected
[ 0.399608] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.399614] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.399618] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.399667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.399668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.399669] usb usb2: Product: xHCI Host Controller
[ 0.399671] usb usb2: Manufacturer: Linux 5.4.50-porteus xhci-hcd
[ 0.399672] usb usb2: SerialNumber: 0000:00:14.0
[ 0.399770] hub 2-0:1.0: USB hub found
[ 0.399795] hub 2-0:1.0: 6 ports detected
[ 0.404702] ehci-fsl: Freescale EHCI Host controller driver
[ 0.404753] usbcore: registered new interface driver uas
[ 0.404768] usbcore: registered new interface driver usb-storage
[ 0.404773] usbcore: registered new interface driver ums-alauda
[ 0.404779] usbcore: registered new interface driver ums-cypress
[ 0.404784] usbcore: registered new interface driver ums-datafab
[ 0.404789] usbcore: registered new interface driver ums_eneub6250
[ 0.404793] usbcore: registered new interface driver ums-freecom
[ 0.404798] usbcore: registered new interface driver ums-isd200
[ 0.404803] usbcore: registered new interface driver ums-jumpshot
[ 0.404807] usbcore: registered new interface driver ums-karma
[ 0.404812] usbcore: registered new interface driver ums-onetouch
[ 0.404818] usbcore: registered new interface driver ums-realtek
[ 0.404822] usbcore: registered new interface driver ums-sddr09
[ 0.404827] usbcore: registered new interface driver ums-sddr55
[ 0.404831] usbcore: registered new interface driver ums-usbat
[ 0.404860] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.405232] i8042: Warning: Keylock active
[ 0.406694] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.406697] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.406820] mousedev: PS/2 mouse device common for all mice
[ 0.407030] rtc_cmos 00:01: RTC can wake from S4
[ 0.407693] rtc_cmos 00:01: registered as rtc0
[ 0.407694] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.407836] intel_pstate: Intel P-state driver initializing
[ 0.408064] intel_pstate: HWP enabled
[ 0.408072] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.408075] sdhci: Secure Digital Host Controller Interface driver
[ 0.408075] sdhci: Copyright(c) Pierre Ossman
[ 0.408107] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 0.408107] wbsd: Copyright(c) Pierre Ossman
[ 0.408130] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 0.408350] usbcore: registered new interface driver vub300
[ 0.408356] usbcore: registered new interface driver ushc
[ 0.408369] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.408447] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.408463] usbcore: registered new interface driver usbhid
[ 0.408464] usbhid: USB HID core driver
[ 0.408464] exFAT: Version 1.3.0
[ 0.408523] intel_pmc_core INT33A1:00: initialized
[ 0.408642] NET: Registered protocol family 17
[ 0.408852] microcode: sig=0x406e3, pf=0x80, revision=0xc6
[ 0.408901] microcode: Microcode Update Driver: v2.2.
[ 0.408903] IPI shorthand broadcast: enabled
[ 0.408910] sched_clock: Marking stable (405424793, 3472484)->(413611604, -4714327)
[ 0.408986] registered taskstats version 1
[ 0.408987] Loading compiled-in X.509 certificates
[ 0.409034] Key type ._fscrypt registered
[ 0.409035] Key type .fscrypt registered
[ 0.409152] Key type encrypted registered
[ 0.462262] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.463317] rtc_cmos 00:01: setting system clock to 2020-07-04T14:21:47 UTC (1593872507)
[ 0.463325] ALSA device list:
[ 0.463328] No soundcards found.
[ 0.701013] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.702108] ata1.00: ATA-9: WDC WD10SPCX-75KHST0, 02.01A02, max UDMA/133
[ 0.702113] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.703485] ata1.00: configured for UDMA/133
[ 0.703784] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-75K 1A02 PQ: 0 ANSI: 5
[ 0.704186] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.704191] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.704204] sd 0:0:0:0: [sda] Write Protect is off
[ 0.704207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.704227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.721961] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 0.855243] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 0.856756] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.875974] usb 1-5: New USB device found, idVendor=0bda, idProduct=568a, bcdDevice=61.12
[ 0.875979] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 0.875982] usb 1-5: Product: Integrated Webcam
[ 0.875984] usb 1-5: Manufacturer: CNFEH36M125040004102
[ 0.875987] usb 1-5: SerialNumber: 0x0001
[ 0.879010] ACPI Error: Cannot release Mutex [PATM], not acquired (20190816/exmutex-357)
[ 0.879123] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_MUTEX_NOT_ACQUIRED) (20190816/psparse-529)
[ 0.994973] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[ 1.016947] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.017408] Freeing unused kernel image memory: 992K
[ 1.017481] Write protecting the kernel read-only data: 14336k
[ 1.018438] Freeing unused kernel image memory: 2028K
[ 1.018625] Freeing unused kernel image memory: 112K
[ 1.018672] rodata_test: all tests were successful
[ 1.018675] Run /init as init process
[ 1.067118] random: fast init done
[ 1.123228] usb 1-6: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 1.123232] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.139305] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4702]
[ 1.167070] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1148..]
[ 1.167079] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 1.222296] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3238, fw id: 2245050
[ 1.256962] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 1.382970] tsc: Refined TSC clocksource calibration: 2303.987 MHz
[ 1.382982] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135eb66800, max_idle_ns: 440795213155 ns
[ 1.383008] clocksource: Switched to clocksource tsc
[ 1.526776] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[ 1.566042] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[ 1.612707] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[ 1.921952] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 2.050641] usb 1-7: New USB device found, idVendor=04f3, idProduct=2494, bcdDevice=57.12
[ 2.050647] usb 1-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 2.050650] usb 1-7: Product: Touchscreen
[ 2.050653] usb 1-7: Manufacturer: ELAN
[ 2.059218] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input7
[ 2.059407] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input8
[ 2.059508] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input9
[ 2.059669] hid-generic 0003:04F3:2494.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
[ 2.106004] random: crng init done
[ 2.106008] random: 3 urandom warning(s) missed due to ratelimiting
[ 2.175759] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2.175792] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2.176128] ISO 9660 Extensions: RRIP_1991A
[ 2.223121] /dev/loop1: Can't open blockdev
[ 2.402666] /dev/loop1: Can't open blockdev
[ 2.437069] /dev/loop2: Can't open blockdev
[ 2.466088] /dev/loop3: Can't open blockdev
[ 2.500369] /dev/loop4: Can't open blockdev
[ 2.807145] REISERFS warning (device loop12): sh-2006 read_super_block: bread failed (dev loop12, block 16, size 4096)
[ 6.514428] udevd[569]: starting eudev-3.2.9
[ 7.778744] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 7.818885] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 7.833284] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 7.846783] intel_ish_ipc 0000:00:13.0: enabling device (0000 -> 0002)
[ 7.866534] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 7.869349] intel_rapl_common: Found RAPL domain package
[ 7.869350] intel_rapl_common: Found RAPL domain dram
[ 7.876478] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 8.013492] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20190816/nspredef-258)
[ 8.013502] ACPI: Invalid package element [0]: got number, expecting [R]
[ 8.013503] _ART package 0 is invalid, ignored
[ 8.060703] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.066372] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.068465] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.068466] cfg80211: failed to load regulatory.db
[ 8.080929] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 8.080931] fb0: switching to inteldrmfb from EFI VGA
[ 8.081607] Console: switching to colour dummy device 80x25
[ 8.081646] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 8.083033] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.083035] [drm] Driver supports precise vblank timestamp query.
[ 8.083743] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.100274] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 8.102286] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.103173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 8.108757] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 8.109108] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa0224b40)
[ 8.110201] fbcon: i915drmfb (fb0) is primary device
[ 8.115745] Console: switching to colour frame buffer device 240x67
[ 8.141775] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 8.163797] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 8.165489] acpi INT33D5:00: intel-hid: created platform device
[ 8.165676] input: Intel HID events as /devices/platform/INT33D5:00/input/input12
[ 8.168628] Intel(R) Wireless WiFi driver for Linux
[ 8.168629] Copyright(c) 2003- 2015 Intel Corporation
[ 8.169036] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.253725] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3253: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.253729] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.253731] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.253732] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.253733] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.253735] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 8.253737] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 8.253739] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 8.259700] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 8.260242] i2c_hid i2c-DELL073B:00: i2c-DELL073B:00 supply vdd not found, using dummy regulator
[ 8.260301] i2c_hid i2c-DELL073B:00: i2c-DELL073B:00 supply vddl not found, using dummy regulator
[ 8.283592] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[ 8.283596] iwlwifi 0000:01:00.0: Found debug configuration: 0
[ 8.284202] iwlwifi 0000:01:00.0: loaded firmware version 29.163394017.0 op_mode iwlmvm
[ 8.303966] input: DELL073B:00 06CB:7E7D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL073B:00/0018:06CB:7E7D.0002/input/input14
[ 8.304087] input: DELL073B:00 06CB:7E7D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL073B:00/0018:06CB:7E7D.0002/input/input15
[ 8.304183] hid-generic 0018:06CB:7E7D.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL073B:00 06CB:7E7D] on i2c-DELL073B:00
[ 8.318894] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 8.318940] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 8.318978] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 8.319014] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 8.319049] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 8.319084] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 10.266019] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 10.266070] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 11.141044] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 11.141049] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.141051] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.141053] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.141055] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.141057] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 11.314509] intel_rapl_common: Found RAPL domain package
[ 11.314511] intel_rapl_common: Found RAPL domain core
[ 11.314512] intel_rapl_common: Found RAPL domain uncore
[ 11.314513] intel_rapl_common: Found RAPL domain dram
[ 11.553453] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 11.562967] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=8
[ 11.570451] hid-generic 001F:8086:0001.0003: hidraw2: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:0001] on
[ 11.582361] Bluetooth: Core ver 2.22
[ 11.582375] NET: Registered protocol family 31
[ 11.582375] Bluetooth: HCI device and connection manager initialized
[ 11.582380] Bluetooth: HCI socket layer initialized
[ 11.582382] Bluetooth: L2CAP socket layer initialized
[ 11.582385] Bluetooth: SCO socket layer initialized
[ 11.582403] cryptd: max_cpu_qlen set to 1000
[ 11.585289] hid-generic 001F:8086:8001.0004: hidraw3: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:8001] on
[ 11.594644] hid-generic 001F:8086:0001.0005: hidraw4: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:0001] on
[ 11.608350] hid-generic 001F:8086:8001.0006: hidraw5: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:8001] on
[ 11.610929] hid-generic 001F:8086:0001.0007: hidraw6: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:0001] on
[ 11.613470] hid-generic 001F:8086:8001.0008: hidraw7: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:8001] on
[ 11.618734] hid-generic 001F:8086:0002.0009: hidraw8: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:0002] on
[ 11.623841] hid-generic 001F:8086:8002.000A: hidraw9: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:8002] on
[ 11.684912] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input22
[ 11.684985] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input23
[ 11.685025] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:2494.0001/input/input24
[ 11.685101] hid-multitouch 0003:04F3:2494.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
[ 11.725462] input: DELL073B:00 06CB:7E7D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL073B:00/0018:06CB:7E7D.0002/input/input26
[ 11.725558] input: DELL073B:00 06CB:7E7D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL073B:00/0018:06CB:7E7D.0002/input/input27
[ 11.725634] hid-multitouch 0018:06CB:7E7D.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL073B:00 06CB:7E7D] on i2c-DELL073B:00
[ 11.771102] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 11.773733] AVX2 version of gcm_enc/dec engaged.
[ 11.773737] AES CTR mode by8 optimization enabled
[ 11.784747] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 11.785458] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 11.790838] usbcore: registered new interface driver btusb
[ 11.794177] iwlwifi 0000:01:00.0: base HW address: ac:2b:6e:60:1d:f5
[ 11.809132] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 11.814668] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 11.814677] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 11.814778] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 11.814782] Bluetooth: hci0: failed to open default fw file: intel/ibt-hw-37.8.bseq
[ 11.884318] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 11.884951] thermal thermal_zone10: failed to read out thermal zone (-61)
[ 12.344175] uvcvideo: Found UVC 1.00 device Integrated Webcam (0bda:568a)
[ 12.351568] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 12.351571] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 12.351573] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 12.351575] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.351653] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input29
[ 12.351727] usbcore: registered new interface driver uvcvideo
[ 12.351729] USB Video Class driver (1.1.1)
[ 13.064794] NET: Registered protocol family 10
[ 13.069572] Segment Routing with IPv6
[ 13.935450] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 14.020415] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 14.021807] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 14.065551] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 14.174935] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 14.176156] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 26.061272] wlan0: authenticate with 24:f5:a2:3f:a3:8d
[ 26.065782] wlan0: send auth to 24:f5:a2:3f:a3:8d (try 1/3)
[ 26.076791] wlan0: authenticated
[ 26.078916] wlan0: associate with 24:f5:a2:3f:a3:8d (try 1/3)
[ 26.096390] wlan0: RX AssocResp from 24:f5:a2:3f:a3:8d (capab=0x411 status=0 aid=7)
[ 26.097103] wlan0: associated
[ 26.224173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.713813] PM: suspend entry (deep)
[ 33.713883] Filesystems sync: 0.000 seconds
[ 33.714330] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 33.715812] OOM killer disabled.
[ 33.715812] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 33.716905] printk: Suspending console(s) (use no_console_suspend to debug)
[ 33.717230] wlan0: deauthenticating from 24:f5:a2:3f:a3:8d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 33.722007] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 33.722292] sd 0:0:0:0: [sda] Stopping disk
[ 33.918012] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 34.746548] ACPI: EC: interrupt blocked
[ 34.773811] ACPI: Preparing to enter system sleep state S3
[ 34.779418] ACPI: EC: event blocked
[ 34.779419] ACPI: EC: EC stopped
[ 34.779421] PM: Saving platform NVS memory
[ 34.779460] Disabling non-boot CPUs ...
[ 34.780928] smpboot: CPU 1 is now offline
[ 34.783234] smpboot: CPU 2 is now offline
[ 34.785407] smpboot: CPU 3 is now offline
[ 34.788158] ACPI: Low-level resume complete
[ 34.788221] ACPI: EC: EC started
[ 34.788221] PM: Restoring platform NVS memory
[ 34.788908] Enabling non-boot CPUs ...
[ 34.788931] x86: Booting SMP configuration:
[ 34.788931] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 34.789619] CPU1 is up
[ 34.789636] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 34.790430] CPU2 is up
[ 34.790445] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 34.791118] CPU3 is up
[ 34.792162] ACPI: Waking up from system sleep state S3
[ 35.086980] ACPI: EC: interrupt unblocked
[ 35.113626] ACPI: EC: event unblocked
[ 35.117141] sd 0:0:0:0: [sda] Starting disk
[ 35.131524] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 35.209744] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 35.211202] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 35.347013] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[ 35.421883] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 35.422031] ata2: SATA link down (SStatus 4 SControl 300)
[ 35.423161] ata1.00: configured for UDMA/133
[ 35.587012] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[ 35.827031] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 35.952972] usb 1-6: device firmware changed
[ 35.953748] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=8
[ 35.953918] OOM killer enabled.
[ 35.953919] Restarting tasks ... done.
[ 35.979771] usb 1-6: USB disconnect, device number 3
[ 36.010775] PM: suspend exit
[ 36.093772] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[ 36.223691] usb 1-6: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 36.223694] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 36.239574] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 36.239613] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 36.239615] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 36.239642] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 36.239643] Bluetooth: hci0: failed to open default fw file: intel/ibt-hw-37.8.bseq
[ 42.213079] wlan0: authenticate with 24:f5:a2:3f:a3:8d
[ 42.219807] wlan0: send auth to 24:f5:a2:3f:a3:8d (try 1/3)
[ 42.230803] wlan0: authenticated
[ 42.231825] wlan0: associate with 24:f5:a2:3f:a3:8d (try 1/3)
[ 42.248583] wlan0: RX AssocResp from 24:f5:a2:3f:a3:8d (capab=0x411 status=0 aid=6)
[ 42.266551] wlan0: associated
[ 42.356411] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
guest@porteus:~$
Code: Select all
guest@porteus:/mnt/sda6/porteus4.0/Guest$ su
Password:
root@porteus:/mnt/sda6/porteus4.0/Guest# spectre*.sh
bash: spectre-meltdown-checker.sh: command not found
root@porteus:/mnt/sda6/porteus4.0/Guest# exit
exit
guest@porteus:/mnt/sda6/porteus4.0/Guest$ ./spectre*.sh
Spectre and Meltdown mitigation detection tool v0.41
Note that you should launch this script with root privileges to get accurate information.
We'll proceed but you might see permission denied errors.
To run it as root, you can try the following command: sudo ./spectre-meltdown-checker.sh
Checking for vulnerabilities on current system
Kernel is Linux 5.4.50-porteus #1 SMP Wed Jul 1 14:48:01 UTC 2020 x86_64
CPU is Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
:
:
:
> SUMMARY: CVE-2017-5753:OK CVE-2017-5715:KO CVE-2017-5754:OK CVE-2018-3640:KO CVE-2018-3639:OK CVE-2018-3615:KO CVE-2018-3620:OK CVE-2018-3646:OK CVE-2018-12126:KO CVE-2018-12130:KO CVE-2018-12127:KO CVE-2019-11091:KO
We're missing some kernel info (see -v), accuracy might be reduced
Need more detailed information about mitigation options? Use --explain
A false sense of security is worse than no security at all, see --disclaimer
guest@porteus:/mnt/sda6/porteus4.0/Guest$Ed
-
maia
- Samurai
- Posts: 123
- Joined: 08 Aug 2019, 16:56
- Distribution: Porteus-5 64b Openbox
- Location: Brasil
Porteus Kernel Builder
The processor I use still has 04 uncorrected vulnerabilities
Checking for vulnerabilities on current system
Kernel is Linux 5.6.18-porteus #1 SMP Sat Jun 27 08:10:09 -03 2020 x86_64
CPU is Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz
SUMMARY: CVE-2017-5753:OK CVE-2017-5715:KO CVE-2017-5754:OK CVE-2018-3640:KO CVE-2018-3639:OK CVE-2018-3615:KO CVE-2018-3620:OK CVE-2018-3646:OK CVE-2018-12126:OK CVE-2018-12130:OK CVE-2018-12127:OK CVE-2019-11091:OK CVE-2019-11135:OK CVE-2018-12207:OK CVE-2020-0543:KO
Checking for vulnerabilities on current system
Kernel is Linux 5.6.18-porteus #1 SMP Sat Jun 27 08:10:09 -03 2020 x86_64
CPU is Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz
SUMMARY: CVE-2017-5753:OK CVE-2017-5715:KO CVE-2017-5754:OK CVE-2018-3640:KO CVE-2018-3639:OK CVE-2018-3615:KO CVE-2018-3620:OK CVE-2018-3646:OK CVE-2018-12126:OK CVE-2018-12130:OK CVE-2018-12127:OK CVE-2019-11091:OK CVE-2019-11135:OK CVE-2018-12207:OK CVE-2020-0543:KO
Sorry my english is really, g##gle-tr4nsl4t0r
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm)
[5.4.51] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.4.51.tar (92 M)
http://www.mediafire.com/file/tc7yeorjs ... 5.4.51.tar
c0ca017b725381c341496f2af7f02719 64bit-ALL-kernel5.4.51.tar
Note : Compiler that was used.
for kernel 5.4.51: gcc-10.1.0-x86_64
Firmware data base was built with
kernel-firmware-20200702_74ac3b5-noarch-1 (from slackware)
and
a little addtional from linux-firmware-20200519.8ba6fa6-noarch-1plus.
Thanks to neko.
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm)
[5.4.51] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.4.51.tar (92 M)
http://www.mediafire.com/file/tc7yeorjs ... 5.4.51.tar
c0ca017b725381c341496f2af7f02719 64bit-ALL-kernel5.4.51.tar
Note : Compiler that was used.
for kernel 5.4.51: gcc-10.1.0-x86_64
Firmware data base was built with
kernel-firmware-20200702_74ac3b5-noarch-1 (from slackware)
and
a little addtional from linux-firmware-20200519.8ba6fa6-noarch-1plus.
Code: Select all
SPEAKUP y -> m
SPEAKUP_SYNTH_ACNTPC y -> m
SPEAKUP_SYNTH_ACNTSA y -> m
SPEAKUP_SYNTH_APOLLO y -> m
SPEAKUP_SYNTH_AUDPTR y -> m
SPEAKUP_SYNTH_BNS y -> m
SPEAKUP_SYNTH_DECEXT y -> m
SPEAKUP_SYNTH_DECTLK y -> m
SPEAKUP_SYNTH_DTLK y -> m
SPEAKUP_SYNTH_DUMMY y -> m
SPEAKUP_SYNTH_KEYPC y -> m
SPEAKUP_SYNTH_LTLK y -> m
SPEAKUP_SYNTH_SOFT y -> m
SPEAKUP_SYNTH_SPKOUT y -> m
SPEAKUP_SYNTH_TXPRT y -> m
+EFI_CUSTOM_SSDT_OVERLAYS yLinux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
Ed_P
- Contributor
- Posts: 8359
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Porteus Kernel Builder
Is there a link that shows what bugs are fixed in the new 5.4.51 release so we know what to test for? This just isn't that helpful. ftp://ftp.osuosl.org/pub/slackware/slac ... ngeLog.txt
Ed
-
maia
- Samurai
- Posts: 123
- Joined: 08 Aug 2019, 16:56
- Distribution: Porteus-5 64b Openbox
- Location: Brasil
Porteus Kernel Builder
Hi Blaze.
I tested this latest version and it didn't work with my TP-LINK card either.
Apparently, only versions up to: 5.7.2 - 5.6.18 and 5.4.40 work with my usb card.
I tested this latest version and it didn't work with my TP-LINK card either.
Apparently, only versions up to: 5.7.2 - 5.6.18 and 5.4.40 work with my usb card.
Code: Select all
#####
Linux 5.4.51-porteus #1 SMP Sun Jul 12 10:53:13 UTC 2020 x86_64 Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz GenuineIntel GNU/Linux
[ 9.613967] Segment Routing with IPv6
[ 12.102742] random: crng init done
[ 12.102744] random: 7 urandom warning(s) missed due to ratelimiting
[ 23.150817] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 23.297556] usb 3-2: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[ 23.297562] usb 3-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 23.297565] usb 3-2: Product: USB2.0 WLAN
[ 23.297567] usb 3-2: Manufacturer: ATHEROS
[ 23.297569] usb 3-2: SerialNumber: 12345
[ 23.843593] usb 3-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 23.844765] usbcore: registered new interface driver ath9k_htc
[ 24.136517] usb 3-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 24.388449] ath9k_htc 3-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 53.813368] ath9k_htc: Failed to initialize the device
[ 53.813532] usb 3-2: ath9k_htc: USB layer deinitializedSorry my english is really, g##gle-tr4nsl4t0r
-
Blaze
- DEV Team
- Posts: 3882
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Porteus Kernel Builder
Ed_P, nothing has changed for me.
maia, something lately the kernel is unstable
I have these bugs on 5.7.8
[Updated kernel Examples]
==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm)
[5.7.8] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.7.8.tar (96 M)
http://www.mediafire.com/file/140qvy256 ... l5.7.8.tar
f01e41b7444132b75358b22f01ebe185 64bit-ALL-kernel5.7.8.tar
Note : Compiler that was used.
for kernel 5.7.8: gcc-10.1.0-x86_64
maia, something lately the kernel is unstable
I have these bugs on 5.7.8
Code: Select all
Lockdown: grep: hibernation is restricted; see man kernel_lockdown.7
buggy seq_file .next function 0xffffffff81152f5c did not updated position index
[ 0.599451] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20200326/psargs-330)
[ 0.599564] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200326/psparse-529)
[ 0.600344] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20200326/psargs-330)
[ 0.600441] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200326/psparse-529)
[ 0.600914] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20200326/psargs-330)
[ 0.601015] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20200326/psparse-529)==== AUFS Kernel only for Porteus ====
Simple package (vmlinuz, 000-kernel.xzm, 06-crippled_sources-NNN-XXbit.xzm)
[5.7.8] <-- NEW : "All patches" patching was done.
64bit-ALL-kernel5.7.8.tar (96 M)
http://www.mediafire.com/file/140qvy256 ... l5.7.8.tar
f01e41b7444132b75358b22f01ebe185 64bit-ALL-kernel5.7.8.tar
Note : Compiler that was used.
for kernel 5.7.8: gcc-10.1.0-x86_64
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
