ArchLinux packages manager for Porteus

Here is a place for your projects which are not officially supported by the Porteus Team. For example: your own kernel patched with extra features; desktops not included in the standard ISO like Gnome; base modules that are different than the standard ISO, etc...
raja
Shogun
Shogun
Posts: 276
Joined: 02 May 2017, 09:51
Distribution: v3.2.2-32 and Porteus-Artix-64
Location: Chennai,India

ArchLinux packages manager for Porteus

Post#631 by raja » 29 Apr 2021, 07:53

neko,

With current AUFS, e.g kernel-5.12, numerous errors are noted in dmeg log....

Code: Select all

3.006157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    3.016175] /mnt/sda2/artix/base/000-kernel.xzm: Can't open blockdev
[    3.016290] /mnt/sda2/artix/base/000-kernel.xzm: Can't open blockdev
[    3.016511] /mnt/sda2/artix/base/000-kernel.xzm: Can't open blockdev
[    3.035898] loop0: detected capacity change from 0 to 232696
[    3.086458] loop1: detected capacity change from 0 to 260568
[    3.139161] loop2: detected capacity change from 0 to 134024
[    3.205904] loop3: detected capacity change from 0 to 91728
[    3.253557] loop4: detected capacity change from 0 to 37736
[    3.306668] loop5: detected capacity change from 0 to 2976
[    3.354173] loop6: detected capacity change from 0 to 64624
[    3.405546] loop7: detected capacity change from 0 to 29184
[    3.453187] loop8: detected capacity change from 0 to 360
[    3.505162] loop9: detected capacity change from 0 to 92536
[    3.549918] loop10: detected capacity change from 0 to 4280
[    3.602462] loop11: detected capacity change from 0 to 25752
There are 15 more entries.

Can you please look into it for a solution?

Thanks.
Linux Kernel-4.4.243-32 bit; Linux kernel-5.4.85-64 bit.

neko
DEV Team
DEV Team
Posts: 1752
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

ArchLinux packages manager for Porteus

Post#632 by neko » 02 May 2021, 09:46

@raja

I checked /var/log/dmesg at the boot end of Porteus-LXDE-v5.0rc2-x86_64.iso updated with kernel 5.12.

Code: Select all

$ grep loop /var/log/dmesg
[    0.000000] Command line: BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=UUID:2e83f04f-de0e-4c0a-ab26-8dd722bdff4b/porteus/kernel/UP.Porteus-LXDE-v5.0rc2-x86_64.iso copy2ram kmap=jp
[    0.048996] Kernel command line: quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=UUID:2e83f04f-de0e-4c0a-ab26-8dd722bdff4b/porteus/kernel/UP.Porteus-LXDE-v5.0rc2-x86_64.iso copy2ram kmap=jp
[    0.108757] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400)
[    0.518423] loop: module loaded
[    0.879300]     BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz
[    3.176490] loop0: detected capacity change from 0 to 695800
[    3.186982] exFAT-fs (loop0): invalid boot record signature
[    3.186988] exFAT-fs (loop0): failed to read boot sector
[    3.186990] exFAT-fs (loop0): failed to recognize exfat type
[    3.189981] loop1: detected capacity change from 0 to 156544
[    3.201759] /dev/loop1: Can't open blockdev
[    4.464741] loop1: detected capacity change from 0 to 156544
[    4.479288] loop2: detected capacity change from 0 to 273384
[    4.490782] loop3: detected capacity change from 0 to 195528
[    4.503321] loop4: detected capacity change from 0 to 32072
[    4.517098] loop5: detected capacity change from 0 to 21360
$
I don't know what happened during boot, but it seems boot was a success.

Following article might be usefull for this log.
https://access.redhat.com/discussions/3218241


Thanks.

Post Reply