Page 2 of 4

Re: pstocanonbj or bjfilter [x86_64]

Posted: 13 Dec 2013, 17:36
by Blaze
Yes, i have foomatic-filters-4.0.12-x86_64-1.xzm
and i have this error

Code: Select all

    E [14/Dec/2013:00:01:36 +0400] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
:D :wall:

Re: pstocanonbj or bjfilter [x86_64]

Posted: 13 Dec 2013, 17:46
by francois
Well i think what sorted the problem might have been to edit cupsd.conf
SystemGroup lpadmin
listen localhost:631
listen *:631
I also had to install foomatic-filters & ghostscript too ....
The printer is perfect now.

Re: pstocanonbj or bjfilter [x86_64]

Posted: 13 Dec 2013, 18:12
by Blaze
with foomatic-filters & ghostscript

Code: Select all

D [14/Dec/2013:22:03:10 +0400] [Job 3] Wrote 1 pages...
D [14/Dec/2013:22:03:10 +0400] [Job 3] Set job-printer-state-message to "child process aborted", current level=ERROR
D [14/Dec/2013:22:03:10 +0400] [Job 3] Sent 0 bytes...
D [14/Dec/2013:22:03:10 +0400] [Job 3] Waiting for read thread to exit...
D [14/Dec/2013:22:03:10 +0400] [Job 3] Read 163 bytes of back-channel data...
D [14/Dec/2013:22:03:10 +0400] [Job 3] End of messages
D [14/Dec/2013:22:03:10 +0400] [Job 3] printer-state=3(idle)
D [14/Dec/2013:22:03:10 +0400] [Job 3] printer-state-message="child process aborted"
D [14/Dec/2013:22:03:10 +0400] [Job 3] printer-state-reasons=none
W [14/Dec/2013:22:03:26 +0400] [CGI] Missing Product in /usr/share/cups/model/canonpixus550i.ppd!
W [14/Dec/2013:22:03:26 +0400] [CGI] Missing Product in /usr/share/cups/model/canonpixus850i.ppd!
W [14/Dec/2013:22:03:26 +0400] [CGI] Missing Product in /usr/share/cups/model/canonpixus950i.ppd!
E [14/Dec/2013:22:04:13 +0400] [CGI] Saw EOF, expected '}'!
E [14/Dec/2013:22:04:21 +0400] [CGI] Saw EOF, expected '}'! 

Re: pstocanonbj or bjfilter [x86_64]

Posted: 14 Dec 2013, 07:06
by Ahau
Are you running porteus 2.1 with the 07-printing.xzm module, or are you running an older version and/or a custom printer driver module?

The default printing module for 2.1 comes with cups-bjnp which is required for printing over a network on some canon printers. I can't tell you how long it took me to figure that one out -- my printer (Canon Pixma MG5300) would work when connected via usb but not over wifi, even though everything appeared as if it was working normally. No error messages, just nothing came out of the printer. HTH -- if not, try booting 2.1 with print module without saved changes and give it a shot and let me know if the error logs change and what happens.

Re: pstocanonbj or bjfilter [x86_64]

Posted: 14 Dec 2013, 08:59
by Blaze
Ahau.
I use Porteus 2.1 x64 and 07-printing.xzm without saved changes + i tried everything advices with pstocanonbj_3.3.orig_x86_64.xzm, Canon-PIXMA-iP5000.ppd, foomatic-filters-4.0.12-x86_64-1.xzm - but it does not help me.

Re: pstocanonbj or bjfilter [x86_64]

Posted: 15 Dec 2013, 12:45
by francois
I hope that cups 1.6 will solve your problem. It is supposed to work directly to pdf format instead of passing thru ps. I wonder what impact this will have on our porteus print pack?

Re: pstocanonbj or bjfilter [x86_64]

Posted: 15 Dec 2013, 16:12
by Blaze

Re: pstocanonbj or bjfilter [x86_64]

Posted: 19 Dec 2013, 01:52
by francois
Have you tried a factory reset on your printer?

Re: pstocanonbj or bjfilter [x86_64]

Posted: 19 Dec 2013, 16:33
by Blaze
francois, my Canon iP1500 is a veteran 8)
I have this printer since 2002 year :friends:
canon pixma ip1500 waste ink absorber is full
I have cleaned the absorber 3 times on this veteran (fixyourownprinter.com/forums/inkjet/41348)
factory reset
What do you mean about factory reset?

Re: pstocanonbj or bjfilter [x86_64]

Posted: 19 Dec 2013, 23:33
by francois
Just an idea like that. My brother printer has such a function called factory reset:
http://welcome.solutions.brother.com/BS ... l5070n_all

I thought that canon printers would have such a function. 8)

It seems that such operation is possible on canon printers:
http://www.ehow.com/how_5943494_perform ... inter.html
Often a hard reset of the printer will resolve issues with communication between the printer and the computer.

Re: pstocanonbj or bjfilter [x86_64]

Posted: 21 Dec 2013, 07:55
by Blaze
It does not help.

BTW i have done the module cups-1.7.0-x86_64-1wsr.xzm (WARNING It can kill your Porteus)

Re: pstocanonbj or bjfilter [x86_64]

Posted: 23 Dec 2013, 13:33
by francois
Thanks for cups 1.7. I shoul try it in the following days. Does it make any difference for your printer?

Re: pstocanonbj or bjfilter [x86_64]

Posted: 23 Dec 2013, 15:29
by Blaze
After reboot Porteus with cups 1.7 module - KDE is crashing and i can't boot Porteus with cups 1.7
I can't to test my printer with cups 1.7.

Re: pstocanonbj or bjfilter [x86_64]

Posted: 28 Dec 2013, 06:08
by francois
Maybe you should try cups 1.6.x as:
http://www.linuxfoundation.org/collabor ... ting/group
PDF is the standard print job format from CUPS 1.6.x on

Re: pstocanonbj or bjfilter [x86_64]

Posted: 28 Dec 2013, 12:24
by Blaze
francois, where i can download cups 1.6 module for Porteus?
I cannot find the sourse with cups 1.6 and Slackbuild for it.
Thanks for help.