very strange, that the Z8350 is so different to the Celeron N3050 - the CPUS are quite the same - both Braswell:
I have a Acer Laptop R3-131T with N3050 and everything exept bluetooth (firmware-problem) is working out of the box - even my touch-display - no troubles with C-states - maybe lets compare the modules?
Code: Select all
root@porteus:/home/guest# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:2280] (rev 21)
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:22b1] (rev 21)
00:0b.0 Signal processing controller [1180]: Intel Corporation Device [8086:22dc] (rev 21)
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:22b5] (rev 21)
00:1a.0 Encryption controller [1080]: Intel Corporation Device [8086:2298] (rev 21)
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:2284] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:22c8] (rev 21)
00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:22ca] (rev 21)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:229c] (rev 21)
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:2292] (rev 21)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
02:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 81)
root@porteus:/home/guest# exit
exit
guest@porteus:~$ dmesg
[ 0.000000] Linux version 4.16.3-porteus (root@) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sat Apr 21 12:42:52 Local time zone must be set--
[ 0.000000] Command line: changes=/porteus initrd=/boot/syslinux/initrd.xz BOOT_IMAGE=/boot/syslinux/vmlinuz
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000741fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000741ff000-0x0000000074bfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000074bff000-0x00000000766fefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000766ff000-0x000000007673efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007673f000-0x0000000077341fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077342000-0x0000000077c41fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077c42000-0x0000000077ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Acer Aspire R3-131T/Aspire R3-131T, BIOS V1.09 07/21/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 0FFA00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x01ff8000, 0x01ff8fff] PGTABLE
[ 0.000000] BRK [0x01ff9000, 0x01ff9fff] PGTABLE
[ 0.000000] BRK [0x01ffa000, 0x01ffafff] PGTABLE
[ 0.000000] BRK [0x01ffb000, 0x01ffbfff] PGTABLE
[ 0.000000] BRK [0x01ffc000, 0x01ffcfff] PGTABLE
[ 0.000000] BRK [0x01ffd000, 0x01ffdfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1ff35000-0x1fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000007673E120 0000A4 (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.000000] ACPI: FACP 0x0000000076734000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: DSDT 0x0000000076722000 00C485 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000076680000 000040
[ 0.000000] ACPI: UEFI 0x000000007673D000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000007673C000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: TCPA 0x000000007673B000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000007673A000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076735000 00421B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: MCFG 0x0000000076732000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076730000 0005AC (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007672F000 000D2E (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076721000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000076720000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007671F000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: APIC 0x0000000076733000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007671E000 000432 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: TPM2 0x000000007671D000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FPDT 0x0000000076731000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27fff4000-0x27fff7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x00000000741fefff]
[ 0.000000] node 0: [mem 0x000000007673f000-0x0000000077341fff]
[ 0.000000] node 0: [mem 0x0000000077c42000-0x0000000077ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2051933
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7423 pages used for memmap
[ 0.000000] DMA32 zone: 475072 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c800000-0x7e7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x741ff000-0x74bfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x74bff000-0x766fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x766ff000-0x7673efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77342000-0x77c41fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132888 r8192 d30952 u524288
[ 0.000000] pcpu-alloc: s132888 r8192 d30952 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2019849
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: quiet changes=/porteus initrd=/boot/syslinux/initrd.xz BOOT_IMAGE=/boot/syslinux/vmlinuz
[ 0.000000] Memory: 7994712K/8207732K available (8204K kernel code, 662K rwdata, 1728K rodata, 976K init, 412K bss, 213020K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.002000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.007000] tsc: Detected 1600.000 MHz processor
[ 0.007000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.007000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600000)
[ 0.007000] pid_max: default: 32768 minimum: 301
[ 0.010430] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012229] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012286] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012637] CPU: Physical Processor ID: 0
[ 0.012640] CPU: Processor Core ID: 0
[ 0.012647] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.012648] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012662] mce: CPU supports 6 MCE banks
[ 0.012674] process: using mwait in idle threads
[ 0.012681] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.012683] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.012686] Spectre V2 : Mitigation: Full generic retpoline
[ 0.012976] Freeing SMP alternatives memory: 20K
[ 0.014150] TSC deadline timer enabled
[ 0.014154] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.018018] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.018043] ... version: 3
[ 0.018045] ... bit width: 40
[ 0.018046] ... generic registers: 2
[ 0.018048] ... value mask: 000000ffffffffff
[ 0.018049] ... max period: 0000007fffffffff
[ 0.018050] ... fixed-purpose events: 3
[ 0.018052] ... event mask: 0000000700000003
[ 0.020010] Hierarchical SRCU implementation.
[ 0.024007] smp: Bringing up secondary CPUs ...
[ 0.031026] x86: Booting SMP configuration:
[ 0.031029] .... node #0, CPUs: #1
[ 0.031162] smp: Brought up 1 node, 2 CPUs
[ 0.031162] smpboot: Max logical packages: 2
[ 0.031162] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[ 0.032327] devtmpfs: initialized
[ 0.032373] PM: Registering ACPI NVS region [mem 0x74bff000-0x766fefff] (28311552 bytes)
[ 0.033814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.033814] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.033814] pinctrl core: initialized pinctrl subsystem
[ 0.034202] NET: Registered protocol family 16
[ 0.034601] cpuidle: using governor ladder
[ 0.034601] cpuidle: using governor menu
[ 0.034601] ACPI: bus type PCI registered
[ 0.034601] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.034601] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.034601] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.034601] PCI: Using configuration type 1 for base access
[ 0.038383] ACPI: Added _OSI(Module Device)
[ 0.038383] ACPI: Added _OSI(Processor Device)
[ 0.038383] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.038383] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045783] ACPI Error: No handler for Region [RAM_] (00000000240f2a7e) [EmbeddedControl] (20180105/evregion-166)
[ 0.045889] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180105/exfldio-299)
[ 0.045980] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180105/psparse-550)
[ 0.046097] ACPI Error: No handler for Region [RAM_] (00000000240f2a7e) [EmbeddedControl] (20180105/evregion-166)
[ 0.046192] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180105/exfldio-299)
[ 0.046283] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180105/psparse-550)
[ 0.049679] ACPI: Dynamic OEM Table Load:
[ 0.049694] ACPI: SSDT 0xFFFF880276751000 0004EA (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.050164] ACPI: Dynamic OEM Table Load:
[ 0.050175] ACPI: SSDT 0xFFFF880276758800 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.051012] ACPI: Dynamic OEM Table Load:
[ 0.051022] ACPI: SSDT 0xFFFF88027677A000 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.051431] ACPI: Dynamic OEM Table Load:
[ 0.051441] ACPI: SSDT 0xFFFF8802767209C0 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.052654] ACPI: EC: EC started
[ 0.052656] ACPI: EC: interrupt blocked
[ 0.056129] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.056134] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.056137] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.056139] ACPI: Interpreter enabled
[ 0.056183] ACPI: (supports S0 S3 S4 S5)
[ 0.056185] ACPI: Using IOAPIC for interrupt routing
[ 0.056247] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.057208] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.060599] ACPI: Power Resource [USBC] (on)
[ 0.064300] (null): Device [PWM1] is in always present list
[ 0.068281] ACPI: Power Resource [CLK0] (on)
[ 0.068776] ACPI: Power Resource [CLK0] (on)
[ 0.068858] ACPI: Power Resource [CLK1] (on)
[ 0.075705] ACPI: Power Resource [ID3C] (off)
[ 0.079360] (null): Device [GPED] is in always present list
[ 0.082282] ACPI: Power Resource [FN00] (off)
[ 0.083255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.083265] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.083345] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.083369] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.083997] PCI host bridge to bus 0000:00
[ 0.084000] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.084008] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.084011] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.084014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.084018] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.084022] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.084026] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.084032] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.084036] pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
[ 0.084040] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.084053] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.084300] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.084326] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.084338] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.084348] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.084559] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.084583] pci 0000:00:0b.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[ 0.084806] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.084839] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[ 0.084938] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.085139] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.085166] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[ 0.085179] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[ 0.085266] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.085499] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.085535] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[ 0.085636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.085799] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.085914] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.086092] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[ 0.086207] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.086392] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.086677] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.086748] pci 0000:00:1f.3: reg 0x10: [mem 0x91419000-0x9141901f]
[ 0.086863] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.087272] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.087315] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.087355] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[ 0.087381] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[ 0.087526] pci 0000:01:00.0: supports D1 D2
[ 0.087529] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.090048] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.090057] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.090063] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff]
[ 0.090271] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.090467] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
[ 0.091231] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.094091] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.094100] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x910fffff]
[ 1.122672] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 1.122804] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 1.122932] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.123063] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.123191] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.123319] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.123446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.123572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.126650] ACPI: EC: interrupt unblocked
[ 1.126680] ACPI: EC: event unblocked
[ 1.126713] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.126717] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.126860] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.126860] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.126860] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.126860] vgaarb: loaded
[ 1.127185] SCSI subsystem initialized
[ 1.128030] libata version 3.00 loaded.
[ 1.128039] ACPI: bus type USB registered
[ 1.128079] usbcore: registered new interface driver usbfs
[ 1.128099] usbcore: registered new interface driver hub
[ 1.128128] usbcore: registered new device driver usb
[ 1.128155] Linux video capture interface: v2.00
[ 1.128181] pps_core: LinuxPPS API ver. 1 registered
[ 1.128183] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.128189] PTP clock support registered
[ 1.128273] Advanced Linux Sound Architecture Driver Initialized.
[ 1.128276] PCI: Using ACPI for IRQ routing
[ 1.131991] PCI: pci_cache_line_size set to 64 bytes
[ 1.132107] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.132111] e820: reserve RAM buffer [mem 0x741ff000-0x77ffffff]
[ 1.132114] e820: reserve RAM buffer [mem 0x77342000-0x77ffffff]
[ 1.132410] clocksource: Switched to clocksource tsc-early
[ 1.132501] pnp: PnP ACPI init
[ 1.132639] system 00:00: [io 0x0400-0x047f] has been reserved
[ 1.132644] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 1.132648] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[ 1.132660] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.132662] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.132813] pnp 00:02: Plug and Play ACPI device, IDs ETD0504 PNP0f13 ETD0000 (active)
[ 1.135089] system 00:03: [mem 0x91422000-0x91422fff] has been reserved
[ 1.135094] system 00:03: [mem 0x91420000-0x91420fff] has been reserved
[ 1.135098] system 00:03: [mem 0x9141e000-0x9141efff] has been reserved
[ 1.135102] system 00:03: [mem 0x9141c000-0x9141cfff] has been reserved
[ 1.135105] system 00:03: [mem 0x9141a000-0x9141afff] has been reserved
[ 1.135115] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.135279] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.135284] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.135287] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.135291] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.135295] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
[ 1.135298] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
[ 1.135302] system 00:04: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 1.135306] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.135310] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.135319] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.135625] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.136021] pnp: PnP ACPI: found 6 devices
[ 1.145260] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.145307] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.145313] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.145324] pci 0000:00:1c.0: bridge window [mem 0x91100000-0x911fffff]
[ 1.145340] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.145351] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x910fffff]
[ 1.145367] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.145371] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.145374] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.145377] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.145380] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.145383] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.145387] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.145390] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 1.145393] pci_bus 0000:00: resource 12 [mem 0xfe800000-0xfe80ffff window]
[ 1.145397] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.145400] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[ 1.145403] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[ 1.145628] NET: Registered protocol family 2
[ 1.145991] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 1.146098] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.146387] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.146741] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.146866] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.146945] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.147144] NET: Registered protocol family 1
[ 1.147183] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.151232] PCI: CLS 64 bytes, default 64
[ 1.151334] Unpacking initramfs...
[ 1.307889] random: crng init done
[ 1.323410] Freeing initrd memory: 808K
[ 1.323418] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.323423] software IO TLB [mem 0x701ff000-0x741ff000] (64MB) mapped at [000000009a262fee-0000000049ca7c95]
[ 1.323546] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 1.323582] clocksource: Switched to clocksource tsc
[ 1.324263] Initialise system trusted keyrings
[ 1.324381] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[ 1.327860] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.327952] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.328120] fuse init (API version 7.26)
[ 1.328306] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1.331352] aufs 4.x-rcN-20180312
[ 1.332908] Key type asymmetric registered
[ 1.332910] Asymmetric key parser 'x509' registered
[ 1.332961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.332965] io scheduler noop registered
[ 1.332967] io scheduler deadline registered (default)
[ 1.333804] intel_idle: MWAIT substates: 0x33000020
[ 1.333806] intel_idle: v0.4.1 model 0x4C
[ 1.334072] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.334342] ACPI: AC Adapter [ADP1] (off-line)
[ 1.334500] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.334531] ACPI: Lid Switch [LID0]
[ 1.334621] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.334672] ACPI: Sleep Button [SLPB]
[ 1.334763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.334840] ACPI: Power Button [PWRF]
[ 1.340692] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.340695] ACPI: Thermal Zone [TZ01] (42 C)
[ 1.340947] Linux agpgart interface v0.103
[ 1.343048] loop: module loaded
[ 1.344050] ACPI: Battery Slot [BAT0] (battery present)
[ 1.346454] Fusion MPT base driver 3.04.20
[ 1.346456] Copyright (c) 1999-2008 LSI Corporation
[ 1.346464] Fusion MPT SPI Host driver 3.04.20
[ 1.346486] Fusion MPT SAS Host driver 3.04.20
[ 1.346524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.346526] ehci-pci: EHCI PCI platform driver
[ 1.346543] ehci-platform: EHCI generic platform driver
[ 1.346577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.346587] ohci-pci: OHCI PCI platform driver
[ 1.346605] ohci-platform: OHCI generic platform driver
[ 1.346629] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.346957] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.346968] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.348124] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[ 1.348137] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.348413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.348417] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.348420] usb usb1: Product: xHCI Host Controller
[ 1.348423] usb usb1: Manufacturer: Linux 4.16.3-porteus xhci-hcd
[ 1.348425] usb usb1: SerialNumber: 0000:00:14.0
[ 1.348645] hub 1-0:1.0: USB hub found
[ 1.348674] hub 1-0:1.0: 7 ports detected
[ 1.350425] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.350433] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.350523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.350527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.350530] usb usb2: Product: xHCI Host Controller
[ 1.350533] usb usb2: Manufacturer: Linux 4.16.3-porteus xhci-hcd
[ 1.350535] usb usb2: SerialNumber: 0000:00:14.0
[ 1.350734] hub 2-0:1.0: USB hub found
[ 1.350761] hub 2-0:1.0: 6 ports detected
[ 1.351435] usb: port power management may be unreliable
[ 1.352337] usbcore: registered new interface driver uas
[ 1.352365] usbcore: registered new interface driver usb-storage
[ 1.352378] usbcore: registered new interface driver ums-alauda
[ 1.352390] usbcore: registered new interface driver ums-cypress
[ 1.352405] usbcore: registered new interface driver ums-datafab
[ 1.352418] usbcore: registered new interface driver ums_eneub6250
[ 1.352429] usbcore: registered new interface driver ums-freecom
[ 1.352441] usbcore: registered new interface driver ums-isd200
[ 1.352452] usbcore: registered new interface driver ums-jumpshot
[ 1.352464] usbcore: registered new interface driver ums-karma
[ 1.352475] usbcore: registered new interface driver ums-onetouch
[ 1.352495] usbcore: registered new interface driver ums-realtek
[ 1.352507] usbcore: registered new interface driver ums-sddr09
[ 1.352522] usbcore: registered new interface driver ums-sddr55
[ 1.352534] usbcore: registered new interface driver ums-usbat
[ 1.352605] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.355604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.355844] mousedev: PS/2 mouse device common for all mice
[ 1.356223] rtc_cmos 00:05: RTC can wake from S4
[ 1.356536] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.356597] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram
[ 1.356628] intel_pstate: Intel P-state driver initializing
[ 1.356774] sdhci: Secure Digital Host Controller Interface driver
[ 1.356781] sdhci: Copyright(c) Pierre Ossman
[ 1.369476] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 1.378975] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.491234] mmc0: new HS200 MMC card at address 0001
[ 1.491929] mmcblk0: mmc0:0001 HBG4e 29.1 GiB
[ 1.492391] mmcblk0boot0: mmc0:0001 HBG4e partition 1 4.00 MiB
[ 1.492834] mmcblk0boot1: mmc0:0001 HBG4e partition 2 4.00 MiB
[ 1.493154] mmcblk0rpmb: mmc0:0001 HBG4e partition 3 4.00 MiB, chardev (247:0)
[ 1.495720] mmcblk0: p1 p2
[ 1.674049] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.810618] usb 1-3: New USB device found, idVendor=04f2, idProduct=b520
[ 1.810628] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.810632] usb 1-3: Product: HD WebCam
[ 1.810643] usb 1-3: Manufacturer: SunplusIT Inc
[ 1.896933] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f00)
[ 1.907406] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 1.916218] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.917723] psmouse serio1: elantech: Elan sample query result 01, 67, 75
[ 1.929564] usb 2-1: New USB device found, idVendor=0781, idProduct=5583
[ 1.929583] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.929596] usb 2-1: Product: Ultra Fit
[ 1.929607] usb 2-1: Manufacturer: SanDisk
[ 1.929616] usb 2-1: SerialNumber: 4C530001280113113015
[ 1.931585] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.932132] scsi host0: usb-storage 2-1:1.0
[ 1.974481] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 2.042040] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 2.170297] usb 1-4: New USB device found, idVendor=2386, idProduct=0401
[ 2.170301] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.170313] usb 1-4: Product: Raydium Touch System
[ 2.170316] usb 1-4: Manufacturer: Raydium Corporation
[ 2.286038] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 2.402260] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 2.402447] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 2.402455] wbsd: Copyright(c) Pierre Ossman
[ 2.402673] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 2.406079] usbcore: registered new interface driver vub300
[ 2.406090] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.408233] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.413308] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input6
[ 2.413439] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
[ 2.413450] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.413686] hid-generic 0003:2386:0401.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
[ 2.413749] usbcore: registered new interface driver usbhid
[ 2.413752] usbhid: USB HID core driver
[ 2.414230] NET: Registered protocol family 17
[ 2.415385] microcode: sig=0x406c3, pf=0x1, revision=0x34f
[ 2.415504] microcode: Microcode Update Driver: v2.2.
[ 2.415528] sched_clock: Marking stable (2415085012, 0)->(2415200975, -115963)
[ 2.415816] registered taskstats version 1
[ 2.415818] Loading compiled-in X.509 certificates
[ 2.416575] Key type encrypted registered
[ 2.417379] rtc_cmos 00:05: setting system clock to 2019-05-05 13:18:53 UTC (1557062333)
[ 2.417407] ALSA device list:
[ 2.417409] No soundcards found.
[ 2.420728] Freeing unused kernel memory: 976K
[ 2.420733] Write protecting the kernel read-only data: 12288k
[ 2.422242] Freeing unused kernel memory: 2020K
[ 2.424051] Freeing unused kernel memory: 320K
[ 2.424059] rodata_test: all tests were successful
[ 2.977118] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 2.977808] sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[ 2.978964] sd 0:0:0:0: [sda] Write Protect is off
[ 2.978968] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.979299] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.984692] sda: sda1
[ 2.986581] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.754771] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 3.755036] mmcblk1: mmc1:aaaa SL32G 29.7 GiB
[ 3.757113] mmcblk1: p1 p2
[ 3.769423] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.209367] REISERFS warning (device loop12): sh-2006 read_super_block: bread failed (dev loop12, block 2, size 4096)
[ 4.209376] REISERFS warning (device loop12): sh-2006 read_super_block: bread failed (dev loop12, block 16, size 4096)
[ 4.219417] REISERFS warning (device loop13): sh-2006 read_super_block: bread failed (dev loop13, block 16, size 4096)
[ 4.295843] REISERFS warning (device loop19): sh-2006 read_super_block: bread failed (dev loop19, block 16, size 4096)
[ 4.411872] REISERFS warning (device loop28): sh-2006 read_super_block: bread failed (dev loop28, block 16, size 4096)
[ 5.207203] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 21.904067] udevd[685]: starting eudev-3.2.5
[ 22.524697] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 22.562497] i2c_hid i2c-INT33D1:00: HID over i2c has not been provided an Int IRQ
[ 22.562544] i2c_hid: probe of i2c-INT33D1:00 failed with error -22
[ 22.710932] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.719858] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 22.968645] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 23.010674] cryptd: max_cpu_qlen set to 1000
[ 23.054039] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 23.054077] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 23.054791] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 23.070643] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0x0000000046f34454, 30:65:ec:7c:2b:aa, XID 14100800 IRQ 119
[ 23.070654] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 23.072894] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 23.072899] cfg80211: failed to load regulatory.db
[ 23.140681] SSE version of gcm_enc/dec engaged.
[ 23.183377] Intel(R) Wireless WiFi driver for Linux
[ 23.183380] Copyright(c) 2003- 2015 Intel Corporation
[ 23.222537] [drm] Replacing VGA console driver
[ 23.229937] Console: switching to colour dummy device 80x25
[ 23.230455] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 23.230457] [drm] Driver supports precise vblank timestamp query.
[ 23.233581] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 23.262281] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 23.263523] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 23.263940] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 23.264472] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffa025a9a0)
[ 23.402485] fbcon: inteldrmfb (fb0) is primary device
[ 23.435440] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 23.785573] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 23.805069] iwlwifi 0000:02:00.0: base HW address: 34:02:86:71:a1:ba
[ 23.920364] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 23.921052] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 24.123083] intel_rapl: Found RAPL domain package
[ 24.123085] intel_rapl: Found RAPL domain core
[ 24.672298] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 24.672335] acer_wmi: Function bitmap for Communication Button: 0x801
[ 24.706829] Console: switching to colour frame buffer device 170x48
[ 24.708582] input: Acer WMI hotkeys as /devices/virtual/input/input8
[ 24.728987] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 24.741112] iwlwifi 0000:02:00.0 wlan125: renamed from wlan0
[ 24.746407] iwlwifi 0000:02:00.0 wlan1: renamed from wlan125
[ 24.922083] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.922095] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.922098] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 24.922106] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 24.922108] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 24.922111] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
[ 25.006124] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 25.006250] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 25.230244] Bluetooth: Core ver 2.22
[ 25.230642] NET: Registered protocol family 31
[ 25.230644] Bluetooth: HCI device and connection manager initialized
[ 25.230652] Bluetooth: HCI socket layer initialized
[ 25.230655] Bluetooth: L2CAP socket layer initialized
[ 25.230665] Bluetooth: SCO socket layer initialized
[ 25.735783] usbcore: registered new interface driver btusb
[ 25.750817] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 25.845604] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 25.845612] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2)
[ 25.845710] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 25.845713] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[ 25.850244] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input14
[ 25.852886] hid-multitouch 0003:2386:0401.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
[ 25.977476] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b520)
[ 25.985178] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input21
[ 25.985695] usbcore: registered new interface driver uvcvideo
[ 25.985697] USB Video Class driver (1.1.1)
[ 26.766147] NET: Registered protocol family 10
[ 26.771296] Segment Routing with IPv6
[ 29.949313] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.005158] r8169 0000:01:00.0 eth0: link down
[ 30.005337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.022556] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.178282] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.290813] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.868441] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 34.638635] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 35.741942] wlan1: authenticate with a4:b1:e9:96:a5:f5
[ 35.748658] wlan1: send auth to a4:b1:e9:96:a5:f5 (try 1/3)
[ 35.750943] wlan1: authenticated
[ 35.752043] wlan1: associate with a4:b1:e9:96:a5:f5 (try 1/3)
[ 35.755882] wlan1: RX AssocResp from a4:b1:e9:96:a5:f5 (capab=0x411 status=0 aid=1)
[ 35.757707] wlan1: associated
[ 35.905253] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1168.658470] acpi device:17: Cannot transition to power state D3hot for parent in (unknown)
[ 1169.696628] pci_bus 0000:01: Allocating resources
[ 1169.696685] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1169.696713] pci_bus 0000:02: Allocating resources
[ 1169.696788] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1169.696794] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1169.696866] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91500000-0x916fffff 64bit pref]
[ 1169.696903] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref]
[ 1169.696919] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 1170.975939] wlan1: deauthenticating from a4:b1:e9:96:a5:f5 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1171.004526] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1171.368981] PM: suspend entry (deep)
[ 1171.368992] PM: Syncing filesystems ... done.
[ 1171.375865] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1171.377853] OOM killer disabled.
[ 1171.377855] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1171.379586] Suspending console(s) (use no_console_suspend to debug)
[ 1171.438373] ACPI: EC: interrupt blocked
[ 1171.463228] ACPI: Preparing to enter system sleep state S3
[ 1171.476410] ACPI: EC: event blocked
[ 1171.476411] ACPI: EC: EC stopped
[ 1171.476412] PM: Saving platform NVS memory
[ 1171.476510] Disabling non-boot CPUs ...
[ 1171.484688] smpboot: CPU 1 is now offline
[ 1171.486484] ACPI: Low-level resume complete
[ 1171.486571] ACPI: EC: EC started
[ 1171.486573] PM: Restoring platform NVS memory
[ 1171.487389] Enabling non-boot CPUs ...
[ 1171.487578] x86: Booting SMP configuration:
[ 1171.487588] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 1171.487998] cache: parent cpu1 should not be sleeping
[ 1171.488685] CPU1 is up
[ 1171.489397] ACPI: Waking up from system sleep state S3
[ 1171.717778] ACPI: EC: interrupt unblocked
[ 1172.784821] ACPI: EC: event unblocked
[ 1172.785718] ACPI: button: The lid device is not compliant to SW_LID.
[ 1173.019853] usb 1-5: reset full-speed USB device number 4 using xhci_hcd
[ 1173.146192] usb 1-5: device firmware changed
[ 1173.260834] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 1173.504338] usb 1-3: reset high-speed USB device number 2 using xhci_hcd
[ 1173.639960] acpi LNXPOWER:03: Turning OFF
[ 1173.640179] acpi LNXPOWER:02: Turning OFF
[ 1173.640437] acpi LNXPOWER:00: Turning OFF
[ 1173.640553] OOM killer enabled.
[ 1173.640560] Restarting tasks ... done.
[ 1173.664773] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 1173.665667] PM: suspend exit
[ 1173.685535] usb 1-5: USB disconnect, device number 4
[ 1173.791132] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1173.800543] usb 1-5: new full-speed USB device number 5 using xhci_hcd
[ 1173.803565] r8169 0000:01:00.0 eth0: link down
[ 1173.803732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1173.806194] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1173.903976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1173.928528] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
[ 1173.928535] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1173.945065] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1173.945248] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 1173.945258] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2)
[ 1173.945389] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 1173.945395] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[ 1174.017730] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1174.098153] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1177.863352] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1178.939149] wlan1: authenticate with a4:b1:e9:96:a5:f5
[ 1178.942691] wlan1: send auth to a4:b1:e9:96:a5:f5 (try 1/3)
[ 1178.948352] wlan1: authenticated
[ 1178.950697] wlan1: associate with a4:b1:e9:96:a5:f5 (try 1/3)
[ 1178.954365] wlan1: RX AssocResp from a4:b1:e9:96:a5:f5 (capab=0x411 status=0 aid=2)
[ 1178.955924] wlan1: associated
[ 1178.984942] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready