Problem with tg3 driver for Broadcom Ethernet cards
Posted: 09 Feb 2012, 20:19
I was consistently crashing when trying to boot on a BCM95704A6 network card with 32-bit Porteus 1.1. I tried the 3.2.4 kernel and had the same issue.
Finally, I grabbed the tg3 firmware from Broadcom: http://www.broadcom.com/support/etherne ... server.php. After compiling that driver, creating a module to place tg3.ko into /lib/modules/3.2.4-porteus/kernel/drivers/net/ethernet/broadcom/, and rebooting my system on the problem hardware with the new driver, all the problems ceased.
You may want to investigate fixing this driver in the 1.1 kernel or adding a module for this driver.
Thanks!
--fondfire
Finally, I grabbed the tg3 firmware from Broadcom: http://www.broadcom.com/support/etherne ... server.php. After compiling that driver, creating a module to place tg3.ko into /lib/modules/3.2.4-porteus/kernel/drivers/net/ethernet/broadcom/, and rebooting my system on the problem hardware with the new driver, all the problems ceased.
You may want to investigate fixing this driver in the 1.1 kernel or adding a module for this driver.
Thanks!
--fondfire