Unfortunately, even using kernel 6.1 sound still doesn't work. I know Acer does some different stuff hardware wise, but I didn't know it was this out there.
I may be misreading something, but I am only using one sof module at a time. Should I use multiple of the different versions suggested here?
I tried running modinfo as suggested. I don't know how to read it, so I'll leave that to y'all.
@beny Yeah, I have Windows 10 on my hard drive. I went ahead and got your new compile for sof firmware, but still no result. Here is the result of dmesg. It's a mile long though, sorry, I don't know what to grep for.
Code: Select all
guest@porteus.example.net:~
$ dmesg
[ 0.000000] Linux version 6.1.0-rc8-porteus (root@porteus.example.net) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT_DYNAMIC Tue Dec 6 19:44:30 MSK 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz copy2ram noauto initrd=/boot/syslinux/initrd.xz
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 3632
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fd98fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fd99000-0x0000000040698fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040699000-0x00000000424aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000424af000-0x00000000442fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000442ff000-0x0000000044b2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000044b2f000-0x0000000044bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000044bff000-0x0000000044bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000044c00000-0x0000000048ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000049e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b07fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x44bfe000 ACPI 2.0=0x44bfe014 TPMFinalLog=0x44ac5000 SMBIOS=0x429de000 SMBIOS 3.0=0x429dc000 ESRT=0x3c2b0a98 RNG=0x44b78018 TPMEventLog=0x38545018
[ 0.000000] efi: seeding entropy pool
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: Acer Aspire A517-52/Jasmine_TL, BIOS V1.17 08/31/2021
[ 0.000000] tsc: Detected 2400.000 MHz processor
[ 0.000000] tsc: Detected 2419.200 MHz TSC
[ 0.000005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000012] last_pfn = 0x2b0800 max_arch_pfn = 0x400000000
[ 0.000098] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000728] last_pfn = 0x44c00 max_arch_pfn = 0x400000000
[ 0.007694] esrt: Reserving ESRT space from 0x000000003c2b0a98 to 0x000000003c2b0ad0.
[ 0.007697] e820: update [mem 0x3c2b0000-0x3c2b0fff] usable ==> reserved
[ 0.007708] Using GB pages for direct mapping
[ 0.008126] Secure boot disabled
[ 0.008126] RAMDISK: [mem 0x4192d000-0x41a48fff]
[ 0.008128] ACPI: Early table checksum verification disabled
[ 0.008130] ACPI: RSDP 0x0000000044BFE014 000024 (v02 ACRSYS)
[ 0.008132] ACPI: XSDT 0x0000000044BDB188 00011C (v01 ACRSYS ACRPRDCT 00000002 01000013)
[ 0.008135] ACPI: FACP 0x0000000044BDE000 000114 (v06 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008139] ACPI: DSDT 0x0000000044B81000 059940 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008141] ACPI: FACS 0x0000000044AA2000 000040
[ 0.008142] ACPI: UEFI 0x0000000044B2E000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.008144] ACPI: SSDT 0x0000000044BFA000 00255C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.008146] ACPI: SSDT 0x0000000044BF9000 000100 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.008148] ACPI: SSDT 0x0000000044BF6000 002137 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.008150] ACPI: SSDT 0x0000000044BF2000 003300 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.008151] ACPI: SSDT 0x0000000044BF1000 00077B (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.008153] ACPI: TPM2 0x0000000044BF0000 00004C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008155] ACPI: MSDM 0x0000000044BEF000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.008157] ACPI: SSDT 0x0000000044BEE000 000D02 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.008159] ACPI: NHLT 0x0000000044BEC000 001B54 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008160] ACPI: LPIT 0x0000000044BEB000 0000CC (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008162] ACPI: WSMT 0x0000000044BEA000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008164] ACPI: SSDT 0x0000000044BE9000 000B70 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.008166] ACPI: SSDT 0x0000000044BE8000 00012A (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.008168] ACPI: DBGP 0x0000000044BE7000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008169] ACPI: DBG2 0x0000000044BE6000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008171] ACPI: SSDT 0x0000000044BDF000 006A45 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.008173] ACPI: HPET 0x0000000044BDD000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008175] ACPI: APIC 0x0000000044BDC000 00012C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008176] ACPI: MCFG 0x0000000044BFD000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008178] ACPI: SSDT 0x0000000044B80000 000C78 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008180] ACPI: DMAR 0x0000000044B7F000 000088 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008182] ACPI: UEFI 0x0000000044A9F000 00063A (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.008184] ACPI: UEFI 0x0000000044A9E000 00005C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.008186] ACPI: SSDT 0x0000000044B7E000 000985 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.008187] ACPI: SSDT 0x0000000044B7D000 0000F8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.008189] ACPI: SSDT 0x0000000044B7C000 000835 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.008191] ACPI: FPDT 0x0000000044B7B000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.008193] ACPI: PTDT 0x0000000044B79000 000CFE (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[ 0.008195] ACPI: BGRT 0x0000000044B7A000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.008196] ACPI: Reserving FACP table memory at [mem 0x44bde000-0x44bde113]
[ 0.008197] ACPI: Reserving DSDT table memory at [mem 0x44b81000-0x44bda93f]
[ 0.008197] ACPI: Reserving FACS table memory at [mem 0x44aa2000-0x44aa203f]
[ 0.008198] ACPI: Reserving UEFI table memory at [mem 0x44b2e000-0x44b2e235]
[ 0.008198] ACPI: Reserving SSDT table memory at [mem 0x44bfa000-0x44bfc55b]
[ 0.008199] ACPI: Reserving SSDT table memory at [mem 0x44bf9000-0x44bf90ff]
[ 0.008199] ACPI: Reserving SSDT table memory at [mem 0x44bf6000-0x44bf8136]
[ 0.008200] ACPI: Reserving SSDT table memory at [mem 0x44bf2000-0x44bf52ff]
[ 0.008200] ACPI: Reserving SSDT table memory at [mem 0x44bf1000-0x44bf177a]
[ 0.008201] ACPI: Reserving TPM2 table memory at [mem 0x44bf0000-0x44bf004b]
[ 0.008201] ACPI: Reserving MSDM table memory at [mem 0x44bef000-0x44bef054]
[ 0.008202] ACPI: Reserving SSDT table memory at [mem 0x44bee000-0x44beed01]
[ 0.008202] ACPI: Reserving NHLT table memory at [mem 0x44bec000-0x44bedb53]
[ 0.008203] ACPI: Reserving LPIT table memory at [mem 0x44beb000-0x44beb0cb]
[ 0.008203] ACPI: Reserving WSMT table memory at [mem 0x44bea000-0x44bea027]
[ 0.008204] ACPI: Reserving SSDT table memory at [mem 0x44be9000-0x44be9b6f]
[ 0.008204] ACPI: Reserving SSDT table memory at [mem 0x44be8000-0x44be8129]
[ 0.008205] ACPI: Reserving DBGP table memory at [mem 0x44be7000-0x44be7033]
[ 0.008205] ACPI: Reserving DBG2 table memory at [mem 0x44be6000-0x44be6053]
[ 0.008206] ACPI: Reserving SSDT table memory at [mem 0x44bdf000-0x44be5a44]
[ 0.008206] ACPI: Reserving HPET table memory at [mem 0x44bdd000-0x44bdd037]
[ 0.008207] ACPI: Reserving APIC table memory at [mem 0x44bdc000-0x44bdc12b]
[ 0.008207] ACPI: Reserving MCFG table memory at [mem 0x44bfd000-0x44bfd03b]
[ 0.008208] ACPI: Reserving SSDT table memory at [mem 0x44b80000-0x44b80c77]
[ 0.008208] ACPI: Reserving DMAR table memory at [mem 0x44b7f000-0x44b7f087]
[ 0.008209] ACPI: Reserving UEFI table memory at [mem 0x44a9f000-0x44a9f639]
[ 0.008209] ACPI: Reserving UEFI table memory at [mem 0x44a9e000-0x44a9e05b]
[ 0.008210] ACPI: Reserving SSDT table memory at [mem 0x44b7e000-0x44b7e984]
[ 0.008210] ACPI: Reserving SSDT table memory at [mem 0x44b7d000-0x44b7d0f7]
[ 0.008211] ACPI: Reserving SSDT table memory at [mem 0x44b7c000-0x44b7c834]
[ 0.008212] ACPI: Reserving FPDT table memory at [mem 0x44b7b000-0x44b7b043]
[ 0.008212] ACPI: Reserving PTDT table memory at [mem 0x44b79000-0x44b79cfd]
[ 0.008213] ACPI: Reserving BGRT table memory at [mem 0x44b7a000-0x44b7a037]
[ 0.008235] No NUMA configuration found
[ 0.008235] Faking a node at [mem 0x0000000000000000-0x00000002b07fffff]
[ 0.008237] NODE_DATA(0) allocated [mem 0x2b07f8000-0x2b07fcfff]
[ 0.008246] Zone ranges:
[ 0.008246] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008247] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008248] Normal [mem 0x0000000100000000-0x00000002b07fffff]
[ 0.008249] Movable zone start for each node
[ 0.008249] Early memory node ranges
[ 0.008250] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008250] node 0: [mem 0x0000000000100000-0x000000003fd98fff]
[ 0.008251] node 0: [mem 0x0000000040699000-0x00000000424aefff]
[ 0.008251] node 0: [mem 0x0000000044bff000-0x0000000044bfffff]
[ 0.008252] node 0: [mem 0x0000000100000000-0x00000002b07fffff]
[ 0.008253] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b07fffff]
[ 0.008255] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008272] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.009560] On node 0, zone DMA32: 2304 pages in unavailable ranges
[ 0.009617] On node 0, zone DMA32: 10064 pages in unavailable ranges
[ 0.018045] On node 0, zone Normal: 13312 pages in unavailable ranges
[ 0.018210] On node 0, zone Normal: 30720 pages in unavailable ranges
[ 0.018231] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[ 0.018540] ACPI: PM-Timer IO Port: 0x1808
[ 0.018544] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.018545] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.018546] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.018546] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.018547] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.018547] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.018548] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.018548] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.018548] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.018549] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.018549] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.018550] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.018550] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.018550] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.018551] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.018551] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.018586] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.018589] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018590] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.018594] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.018594] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.018596] TSC deadline timer available
[ 0.018597] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.018601] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018602] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.018603] PM: hibernation: Registered nosave memory: [mem 0x3c2b0000-0x3c2b0fff]
[ 0.018603] PM: hibernation: Registered nosave memory: [mem 0x3fd99000-0x40698fff]
[ 0.018604] PM: hibernation: Registered nosave memory: [mem 0x424af000-0x442fefff]
[ 0.018604] PM: hibernation: Registered nosave memory: [mem 0x442ff000-0x44b2efff]
[ 0.018605] PM: hibernation: Registered nosave memory: [mem 0x44b2f000-0x44bfefff]
[ 0.018605] PM: hibernation: Registered nosave memory: [mem 0x44c00000-0x48ffffff]
[ 0.018606] PM: hibernation: Registered nosave memory: [mem 0x49000000-0x49dfffff]
[ 0.018606] PM: hibernation: Registered nosave memory: [mem 0x49e00000-0x4f7fffff]
[ 0.018607] PM: hibernation: Registered nosave memory: [mem 0x4f800000-0xbfffffff]
[ 0.018607] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[ 0.018607] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe00ffff]
[ 0.018608] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[ 0.018608] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[ 0.018608] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.018609] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xff4fffff]
[ 0.018609] PM: hibernation: Registered nosave memory: [mem 0xff500000-0xffffffff]
[ 0.018610] [mem 0x4f800000-0xbfffffff] available for PCI devices
[ 0.018612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.023481] setup_percpu: NR_CPUS:32 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.023581] percpu: Embedded 44 pages/cpu s143208 r8192 d28824 u262144
[ 0.023585] pcpu-alloc: s143208 r8192 d28824 u262144 alloc=1*2097152
[ 0.023587] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.023597] Fallback order for Node 0: 0
[ 0.023598] Built 1 zonelists, mobility grouping on. Total pages: 2008609
[ 0.023599] Policy zone: Normal
[ 0.023600] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz copy2ram noauto initrd=/boot/syslinux/initrd.xz
[ 0.023644] Unknown kernel command line parameters "copy2ram noauto BOOT_IMAGE=/boot/syslinux/vmlinuz", will be passed to user space.
[ 0.023661] random: crng init done
[ 0.023874] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.023985] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.024043] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.024051] software IO TLB: area num 8.
[ 0.039445] Memory: 7835648K/8162616K available (12289K kernel code, 1173K rwdata, 2432K rodata, 1268K init, 972K bss, 326712K reserved, 0K cma-reserved)
[ 0.039469] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.039704] Dynamic Preempt: voluntary
[ 0.039723] rcu: Preemptible hierarchical RCU implementation.
[ 0.039724] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.039725] Trampoline variant of Tasks RCU enabled.
[ 0.039725] Tracing variant of Tasks RCU enabled.
[ 0.039725] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.039726] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.039753] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[ 0.040018] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.040205] Console: colour dummy device 80x25
[ 0.040215] printk: console [tty0] enabled
[ 0.040224] ACPI: Core revision 20220331
[ 0.040426] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.040427] APIC: Switch to symmetric I/O mode setup
[ 0.040428] DMAR: Host address width 39
[ 0.040429] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.040434] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ 0.040435] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.040440] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.040442] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.040444] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.040445] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.042021] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.046504] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[ 0.046509] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200)
[ 0.046511] pid_max: default: 32768 minimum: 301
[ 0.047507] LSM: Security Framework initializing
[ 0.047507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.047507] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.047507] CPU0: Thermal monitoring enabled (TM1)
[ 0.047507] process: using mwait in idle threads
[ 0.047507] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.047507] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.047507] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.047507] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[ 0.047507] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.047507] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.047507] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.047507] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.047507] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.047507] Freeing SMP alternatives memory: 24K
[ 0.047507] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[ 0.047507] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.047507] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.047507] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.047507] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.047507] ... version: 5
[ 0.047507] ... bit width: 48
[ 0.047507] ... generic registers: 8
[ 0.047507] ... value mask: 0000ffffffffffff
[ 0.047507] ... max period: 00007fffffffffff
[ 0.047507] ... fixed-purpose events: 4
[ 0.047507] ... event mask: 0001000f000000ff
[ 0.047507] Estimated ratio of average max frequency by base frequency (times 1024): 1621
[ 0.047507] rcu: Hierarchical SRCU implementation.
[ 0.047507] rcu: Max phase no-delay instances is 400.
[ 0.047507] smp: Bringing up secondary CPUs ...
[ 0.047507] x86: Booting SMP configuration:
[ 0.047507] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.052177] smp: Brought up 1 node, 8 CPUs
[ 0.052177] smpboot: Max logical packages: 1
[ 0.052177] smpboot: Total of 8 processors activated (38707.20 BogoMIPS)
[ 0.052647] devtmpfs: initialized
[ 0.052647] x86/mm: Memory block size: 128MB
[ 0.052872] ACPI: PM: Registering ACPI NVS region [mem 0x442ff000-0x44b2efff] (8585216 bytes)
[ 0.052872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.052872] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.052872] pinctrl core: initialized pinctrl subsystem
[ 0.052885] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.053558] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.053559] thermal_sys: Registered thermal governor 'step_wise'
[ 0.053559] thermal_sys: Registered thermal governor 'user_space'
[ 0.053569] cpuidle: using governor ladder
[ 0.053569] cpuidle: using governor menu
[ 0.053569] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053591] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.053595] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.053606] PCI: Using configuration type 1 for base access
[ 0.053739] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.054528] raid6: skipped pq benchmark and selected avx512x4
[ 0.054528] raid6: using avx512x2 recovery algorithm
[ 0.054546] ACPI: Added _OSI(Module Device)
[ 0.054546] ACPI: Added _OSI(Processor Device)
[ 0.054547] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.054547] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.089007] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089013] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089016] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089018] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089021] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089023] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089107] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089110] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089112] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089114] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089117] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089119] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089120] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089123] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089125] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089126] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089129] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089132] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089133] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089136] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089138] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089140] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089143] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089145] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089146] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089149] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089151] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089152] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089155] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089158] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089159] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089162] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089164] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089165] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089168] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089171] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089172] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089175] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089177] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089178] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089181] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089183] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089185] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089188] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089190] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089191] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089194] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089196] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089294] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089297] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089299] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089300] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089303] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089305] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089387] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089390] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089392] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089393] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089397] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089399] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089528] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089531] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089534] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089535] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089538] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089540] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089542] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089545] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089547] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089548] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089551] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089553] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089555] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089558] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089560] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089561] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089564] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089566] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089568] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089571] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089573] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089574] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089577] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089579] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089580] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089583] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089585] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089587] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089589] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089592] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089593] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089596] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089598] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.089599] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[ 0.089602] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[ 0.089604] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.090540] ACPI: 14 ACPI AML tables successfully acquired and loaded
[ 0.095641] ACPI: Dynamic OEM Table Load:
[ 0.095649] ACPI: SSDT 0xFFFF888100972C00 0001C6 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
[ 0.096181] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.098488] ACPI: Dynamic OEM Table Load:
[ 0.098494] ACPI: SSDT 0xFFFF888100C8F400 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.099114] ACPI: Dynamic OEM Table Load:
[ 0.099119] ACPI: SSDT 0xFFFF888100C84000 0005C3 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.099774] ACPI: Dynamic OEM Table Load:
[ 0.099779] ACPI: SSDT 0xFFFF888100C8F800 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.100477] ACPI: Dynamic OEM Table Load:
[ 0.100483] ACPI: SSDT 0xFFFF88810006E000 0008E7 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.101176] ACPI: Dynamic OEM Table Load:
[ 0.101180] ACPI: SSDT 0xFFFF888100C85800 00048A (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.101831] ACPI: Dynamic OEM Table Load:
[ 0.101836] ACPI: SSDT 0xFFFF888100C86000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20160422)
[ 0.102475] ACPI: Dynamic OEM Table Load:
[ 0.102479] ACPI: SSDT 0xFFFF888100C86800 00048A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.106944] ACPI: EC: EC started
[ 0.106944] ACPI: EC: interrupt blocked
[ 0.107118] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.107119] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.107120] ACPI: Interpreter enabled
[ 0.107150] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.107151] ACPI: Using IOAPIC for interrupt routing
[ 0.107173] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.107174] PCI: Using E820 reservations for host bridge windows
[ 0.109300] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.109653] ACPI: PM: Power Resource [PCRP]
[ 0.109671] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.DGPV], AE_NOT_FOUND (20220331/psargs-330)
[ 0.109676] ACPI Error: Aborting method \_SB.PC00.PEG0.PCRP._ON due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[ 0.112468] ACPI: PM: Power Resource [BTRT]
[ 0.117912] ACPI: PM: Power Resource [V0PR]
[ 0.117980] ACPI: PM: Power Resource [V1PR]
[ 0.118045] ACPI: PM: Power Resource [V2PR]
[ 0.121530] ACPI: PM: Power Resource [WRST]
[ 0.123504] ACPI: PM: Power Resource [V0PR]
[ 0.123543] ACPI: PM: Power Resource [V1PR]
[ 0.123575] ACPI: PM: Power Resource [V2PR]
[ 0.123606] ACPI: PM: Power Resource [V3PR]
[ 0.124966] ACPI: PM: Power Resource [FN00]
[ 0.125001] ACPI: PM: Power Resource [FN01]
[ 0.125034] ACPI: PM: Power Resource [FN02]
[ 0.125067] ACPI: PM: Power Resource [FN03]
[ 0.125099] ACPI: PM: Power Resource [FN04]
[ 0.125459] ACPI: PM: Power Resource [PIN]
[ 0.125650] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[ 0.125654] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.127816] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
[ 0.130092] PCI host bridge to bus 0000:00
[ 0.130093] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.130095] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.130096] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.130097] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window]
[ 0.130098] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.130099] pci_bus 0000:00: root bus resource [bus 00-e0]
[ 0.130172] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
[ 0.130277] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
[ 0.130285] pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
[ 0.130291] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.130294] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.130307] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.130308] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.130310] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.130335] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[ 0.130336] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[ 0.130340] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[ 0.130341] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[ 0.130453] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
[ 0.130462] pci 0000:00:08.0: reg 0x10: [mem 0x6003213000-0x6003213fff 64bit]
[ 0.130567] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[ 0.130579] pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
[ 0.130584] pci 0000:00:0e.0: reg 0x18: [mem 0x50000000-0x51ffffff]
[ 0.130596] pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
[ 0.130798] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[ 0.130820] pci 0000:00:14.0: reg 0x10: [mem 0x52100000-0x5210ffff 64bit]
[ 0.130904] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.131125] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[ 0.131149] pci 0000:00:14.2: reg 0x10: [mem 0x6003208000-0x600320bfff 64bit]
[ 0.131165] pci 0000:00:14.2: reg 0x18: [mem 0x6003212000-0x6003212fff 64bit]
[ 0.131312] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[ 0.131356] pci 0000:00:14.3: reg 0x10: [mem 0x6003204000-0x6003207fff 64bit]
[ 0.131494] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.131760] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[ 0.131790] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.132070] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000
[ 0.132104] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.132383] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[ 0.132407] pci 0000:00:16.0: reg 0x10: [mem 0x600320f000-0x600320ffff 64bit]
[ 0.132492] pci 0000:00:16.0: PME# supported from D3hot
[ 0.132695] pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000
[ 0.132979] pci 0000:00:19.0: [8086:a0c5] type 00 class 0x0c8000
[ 0.133013] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.133292] pci 0000:00:19.1: [8086:a0c6] type 00 class 0x0c8000
[ 0.133326] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.133627] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400
[ 0.133730] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.133767] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.134094] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[ 0.134336] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[ 0.134380] pci 0000:00:1f.3: reg 0x10: [mem 0x6003200000-0x6003203fff 64bit]
[ 0.134432] pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
[ 0.134539] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.134766] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[ 0.134792] pci 0000:00:1f.4: reg 0x10: [mem 0x600320c000-0x600320c0ff 64bit]
[ 0.134821] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.134963] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[ 0.134983] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.135145] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.135169] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.135199] pci 0000:01:00.0: reg 0x18: [mem 0x52004000-0x52004fff 64bit]
[ 0.135218] pci 0000:01:00.0: reg 0x20: [mem 0x52000000-0x52003fff 64bit]
[ 0.135343] pci 0000:01:00.0: supports D1 D2
[ 0.135344] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.135534] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.135537] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.135540] pci 0000:00:1d.0: bridge window [mem 0x52000000-0x520fffff]
[ 0.144752] Low-power S0 idle used by default for system suspend
[ 0.150328] ACPI: EC: interrupt unblocked
[ 0.150329] ACPI: EC: event unblocked
[ 0.150344] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.150345] ACPI: EC: GPE=0x6e
[ 0.150346] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.150347] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.150375] iommu: Default domain type: Translated
[ 0.150376] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.150380] SCSI subsystem initialized
[ 0.150380] libata version 3.00 loaded.
[ 0.150380] ACPI: bus type USB registered
[ 0.150380] usbcore: registered new interface driver usbfs
[ 0.150380] usbcore: registered new interface driver hub
[ 0.150380] usbcore: registered new device driver usb
[ 0.150380] mc: Linux media interface: v0.10
[ 0.150380] videodev: Linux video capture interface: v2.00
[ 0.150380] pps_core: LinuxPPS API ver. 1 registered
[ 0.150380] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.150380] PTP clock support registered
[ 0.150519] Registered efivars operations
[ 0.150533] Advanced Linux Sound Architecture Driver Initialized.
[ 0.150607] PCI: Using ACPI for IRQ routing
[ 0.170958] PCI: pci_cache_line_size set to 64 bytes
[ 0.171103] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.171229] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.171230] e820: reserve RAM buffer [mem 0x3c2b0000-0x3fffffff]
[ 0.171231] e820: reserve RAM buffer [mem 0x3fd99000-0x3fffffff]
[ 0.171232] e820: reserve RAM buffer [mem 0x424af000-0x43ffffff]
[ 0.171232] e820: reserve RAM buffer [mem 0x44c00000-0x47ffffff]
[ 0.171233] e820: reserve RAM buffer [mem 0x2b0800000-0x2b3ffffff]
[ 0.171240] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.171240] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.171240] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.171240] vgaarb: loaded
[ 0.171240] clocksource: Switched to clocksource tsc-early
[ 0.171240] pnp: PnP ACPI init
[ 0.171240] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.171240] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.171240] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.171240] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.171240] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 0.171240] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.171240] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.171240] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.171240] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.171240] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.171240] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.171240] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.171569] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 0.171570] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.171571] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
[ 0.171572] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
[ 0.171573] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[ 0.171575] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.171576] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.171577] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.171578] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ 0.171578] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.171735] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.171935] pnp: PnP ACPI: found 8 devices
[ 0.177054] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.177084] NET: Registered PF_INET protocol family
[ 0.177149] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.178229] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.178237] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.178240] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.178289] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.178465] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.178485] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.178498] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.178529] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.178535] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[ 0.178539] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178542] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ 0.178545] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178546] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ 0.178548] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178550] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ 0.178608] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178609] pci 0000:00:15.3: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[ 0.178669] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178670] pci 0000:00:19.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[ 0.178725] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178726] pci 0000:00:19.1: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[ 0.178785] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.178787] pci 0000:00:1f.5: BAR 0: assigned [mem 0x4f800000-0x4f800fff]
[ 0.178798] pci 0000:00:1d.0: PCI bridge to [bus 01]
[ 0.178800] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
[ 0.178804] pci 0000:00:1d.0: bridge window [mem 0x52000000-0x520fffff]
[ 0.178810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.178812] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.178812] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.178813] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xbfffffff window]
[ 0.178814] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.178815] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.178816] pci_bus 0000:01: resource 1 [mem 0x52000000-0x520fffff]
[ 0.180928] PCI: CLS 64 bytes, default 64
[ 0.180940] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.180940] software IO TLB: mapped [mem 0x0000000034545000-0x0000000038545000] (64MB)
[ 0.180957] Unpacking initramfs...
[ 0.180993] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
[ 0.180995] caller 0xffffffff81013aba mapping multiple BARs
[ 0.181104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[ 0.181112] clocksource: Switched to clocksource tsc
[ 0.181287] Initialise system trusted keyrings
[ 0.181304] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[ 0.181866] zbud: loaded
[ 0.182039] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.182064] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.182086] ntfs3: Max link count 4000
[ 0.182087] ntfs3: Enabled Linux POSIX ACLs support
[ 0.182087] ntfs3: Read-only LZX/Xpress compression included
[ 0.182100] fuse: init (API version 7.37)
[ 0.182149] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.182367] aufs 6.x-rcN-20221107
[ 0.189684] xor: automatically using best checksumming function avx
[ 0.189685] Key type asymmetric registered
[ 0.189685] Asymmetric key parser 'x509' registered
[ 0.189690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.191739] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[ 0.192164] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[ 0.192165] pci_bus 10000:e0: root bus resource [bus e0-ff]
[ 0.192167] pci_bus 10000:e0: root bus resource [mem 0x50000000-0x51ffffff]
[ 0.192168] pci_bus 10000:e0: root bus resource [mem 0x6003102000-0x60031fffff 64bit]
[ 0.192193] pci 10000:e0:17.0: [8086:a0d3] type 00 class 0x010601
[ 0.192214] pci 10000:e0:17.0: reg 0x10: [mem 0x00000000-0x00001fff]
[ 0.192225] pci 10000:e0:17.0: reg 0x14: [mem 0x00000000-0x000000ff]
[ 0.192237] pci 10000:e0:17.0: reg 0x18: [io 0x0000-0x0007]
[ 0.192248] pci 10000:e0:17.0: reg 0x1c: [io 0x0000-0x0003]
[ 0.192259] pci 10000:e0:17.0: reg 0x20: [io 0x0000-0x001f]
[ 0.192270] pci 10000:e0:17.0: reg 0x24: [mem 0x50000000-0x500007ff]
[ 0.192314] pci 10000:e0:17.0: PME# supported from D3hot
[ 0.192351] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
[ 0.192402] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
[ 0.192504] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[ 0.192545] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[ 0.192606] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[ 0.192649] pci 10000:e1:00.0: [15b7:5009] type 00 class 0x010802
[ 0.192680] pci 10000:e1:00.0: reg 0x10: [mem 0x50100000-0x50103fff 64bit]
[ 0.192724] pci 10000:e1:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit]
[ 0.192966] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[ 0.192968] pci 10000:e0:1c.4: bridge window [io 0x0000-0x0fff]
[ 0.192971] pci 10000:e0:1c.4: bridge window [mem 0x50100000-0x501fffff]
[ 0.192977] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[ 0.196155] pci 10000:e0:1c.4: BAR 14: assigned [mem 0x50000000-0x500fffff]
[ 0.196157] pci 10000:e0:17.0: BAR 0: assigned [mem 0x50100000-0x50101fff]
[ 0.196161] pci 10000:e0:1c.4: BAR 13: no space for [io size 0x1000]
[ 0.196162] pci 10000:e0:1c.4: BAR 13: failed to assign [io size 0x1000]
[ 0.196163] pci 10000:e0:17.0: BAR 5: assigned [mem 0x50102000-0x501027ff]
[ 0.196167] pci 10000:e0:17.0: BAR 1: assigned [mem 0x50102800-0x501028ff]
[ 0.196171] pci 10000:e0:17.0: BAR 4: no space for [io size 0x0020]
[ 0.196172] pci 10000:e0:17.0: BAR 4: failed to assign [io size 0x0020]
[ 0.196172] pci 10000:e0:17.0: BAR 2: no space for [io size 0x0008]
[ 0.196173] pci 10000:e0:17.0: BAR 2: failed to assign [io size 0x0008]
[ 0.196174] pci 10000:e0:17.0: BAR 3: no space for [io size 0x0004]
[ 0.196175] pci 10000:e0:17.0: BAR 3: failed to assign [io size 0x0004]
[ 0.196177] pci 10000:e1:00.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit]
[ 0.196190] pci 10000:e1:00.0: BAR 4: assigned [mem 0x50004000-0x500040ff 64bit]
[ 0.196204] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[ 0.196209] pci 10000:e0:1c.4: bridge window [mem 0x50000000-0x500fffff]
[ 0.196226] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[ 0.196227] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[ 0.196270] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 142
[ 0.196335] vmd 0000:00:0e.0: Bound to PCI domain 10000
[ 0.196491] Monitor-Mwait will be used to enter C-1 state
[ 0.196513] Monitor-Mwait will be used to enter C-2 state
[ 0.196517] Monitor-Mwait will be used to enter C-3 state
[ 0.196519] ACPI: \_SB_.PR00: Found 3 idle states
[ 0.196839] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 0.196877] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/PNP0C0D:00/input/input0
[ 0.196888] ACPI: button: Lid Switch [LID0]
[ 0.196914] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.196924] ACPI: button: Sleep Button [SLPB]
[ 0.196941] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.196961] ACPI: button: Power Button [PWRB]
[ 0.198214] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.198215] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.198455] hpet_acpi_add: no address or irqs in _CRS
[ 0.198467] Linux agpgart interface v0.103
[ 0.198512] ACPI: bus type drm_connector registered
[ 0.198952] ACPI: battery: Slot [BAT1] (battery present)
[ 0.200310] loop: module loaded
[ 0.200331] usbcore: registered new interface driver rtsx_usb
[ 0.200632] nvme nvme0: pci function 10000:e1:00.0
[ 0.200641] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[ 0.200644] nvme 10000:e1:00.0: PCI INT A: no GSI
[ 0.200653] ahci 10000:e0:17.0: version 3.0
[ 0.200659] ahci 10000:e0:17.0: can't derive routing for PCI INT A
[ 0.200660] ahci 10000:e0:17.0: PCI INT A: no GSI
[ 0.209077] nvme nvme0: 8/0/0 default/read/poll queues
[ 0.210801] ahci 10000:e0:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.210803] ahci 10000:e0:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds
[ 0.210955] scsi host0: ahci
[ 0.211009] scsi host1: ahci
[ 0.211029] ata1: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102100 irq 144
[ 0.211032] ata2: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102180 irq 144
[ 0.211282] Fusion MPT base driver 3.04.20
[ 0.211283] Copyright (c) 1999-2008 LSI Corporation
[ 0.211285] Fusion MPT SPI Host driver 3.04.20
[ 0.211290] Fusion MPT SAS Host driver 3.04.20
[ 0.211435] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.211438] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.212284] nvme0n1: p1 p2 p3 p4
[ 0.212539] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 0.212743] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.212744] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.212746] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.212765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.212767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.212768] usb usb1: Product: xHCI Host Controller
[ 0.212769] usb usb1: Manufacturer: Linux 6.1.0-rc8-porteus xhci-hcd
[ 0.212769] usb usb1: SerialNumber: 0000:00:14.0
[ 0.212866] hub 1-0:1.0: USB hub found
[ 0.212887] hub 1-0:1.0: 12 ports detected
[ 0.213288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.213289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.213290] usb usb2: Product: xHCI Host Controller
[ 0.213291] usb usb2: Manufacturer: Linux 6.1.0-rc8-porteus xhci-hcd
[ 0.213292] usb usb2: SerialNumber: 0000:00:14.0
[ 0.213328] hub 2-0:1.0: USB hub found
[ 0.213341] hub 2-0:1.0: 4 ports detected
[ 0.213586] usbcore: registered new interface driver uas
[ 0.213593] usbcore: registered new interface driver usb-storage
[ 0.213596] usbcore: registered new interface driver ums-alauda
[ 0.213598] usbcore: registered new interface driver ums-cypress
[ 0.213600] usbcore: registered new interface driver ums-datafab
[ 0.213602] usbcore: registered new interface driver ums_eneub6250
[ 0.213605] usbcore: registered new interface driver ums-freecom
[ 0.213607] usbcore: registered new interface driver ums-isd200
[ 0.213609] usbcore: registered new interface driver ums-jumpshot
[ 0.213612] usbcore: registered new interface driver ums-karma
[ 0.213614] usbcore: registered new interface driver ums-onetouch
[ 0.213617] usbcore: registered new interface driver ums-realtek
[ 0.213619] usbcore: registered new interface driver ums-sddr09
[ 0.213621] usbcore: registered new interface driver ums-sddr55
[ 0.213623] usbcore: registered new interface driver ums-usbat
[ 0.213625] usbcore: registered new device driver apple-mfi-fastcharge
[ 0.213643] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.213644] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.214291] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.214353] mousedev: PS/2 mouse device common for all mice
[ 0.214413] rtc_cmos 00:01: RTC can wake from S4
[ 0.215256] rtc_cmos 00:01: registered as rtc0
[ 0.215430] rtc_cmos 00:01: setting system clock to 2022-12-06T21:33:37 UTC (1670362417)
[ 0.215432] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.215770] intel_pstate: Intel P-state driver initializing
[ 0.216062] intel_pstate: HWP enabled
[ 0.216068] sdhci: Secure Digital Host Controller Interface driver
[ 0.216068] sdhci: Copyright(c) Pierre Ossman
[ 0.216085] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 0.216086] wbsd: Copyright(c) Pierre Ossman
[ 0.216098] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 0.216133] usbcore: registered new interface driver vub300
[ 0.216137] usbcore: registered new interface driver ushc
[ 0.216145] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.216188] efifb: probing for efifb
[ 0.216194] efifb: framebuffer at 0x4000000000, using 1200k, total 1200k
[ 0.216195] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.216196] efifb: scrolling: redraw
[ 0.216196] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.216254] Console: switching to colour frame buffer device 80x30
[ 0.216514] fb0: EFI VGA frame buffer device
[ 0.216528] hid: raw HID events driver (C) Jiri Kosina
[ 0.216538] usbcore: registered new interface driver usbhid
[ 0.216538] usbhid: USB HID core driver
[ 0.216594] intel_pmc_core INT33A1:00: initialized
[ 0.216679] NET: Registered PF_PACKET protocol family
[ 0.217244] microcode: sig=0x806c1, pf=0x80, revision=0x8a
[ 0.217261] microcode: Microcode Update Driver: v2.2.
[ 0.217263] IPI shorthand broadcast: enabled
[ 0.217272] sched_clock: Marking stable (210892075, 6320625)->(233302426, -16089726)
[ 0.217307] registered taskstats version 1
[ 0.217309] Loading compiled-in X.509 certificates
[ 0.224592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.255819] Freeing initrd memory: 1136K
[ 0.256562] Loaded X.509 cert 'Build time autogenerated kernel key: 0594721612a5a30944a4d50a8efc71f940c7e6d3'
[ 0.256624] zswap: loaded using pool lzo/zbud
[ 0.256717] Key type .fscrypt registered
[ 0.256717] Key type fscrypt-provisioning registered
[ 0.256858] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[ 0.256968] Key type encrypted registered
[ 0.257338] ALSA device list:
[ 0.257339] No soundcards found.
[ 0.448671] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 0.518154] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.518274] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.518865] ata1.00: ATA-10: WDC WD10SPZX-21Z10T0, 02.01A02, max UDMA/133
[ 0.520308] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.520317] ata1.00: Features: NCQ-prio
[ 0.522782] ata1.00: configured for UDMA/133
[ 0.522928] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPZX-21Z 1A02 PQ: 0 ANSI: 5
[ 0.523431] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.523437] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.523457] sd 0:0:0:0: [sda] Write Protect is off
[ 0.523461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.523486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.523628] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 0.578165] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 0.578174] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.578177] usb 1-3: Product: USB Receiver
[ 0.578179] usb 1-3: Manufacturer: Logitech
[ 0.581409] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0001/input/input4
[ 0.632967] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[ 0.635205] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input5
[ 0.635466] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input6
[ 0.636717] sda: sda1
[ 0.636900] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.637341] Freeing unused kernel image (initmem) memory: 1268K
[ 0.642633] Write protecting the kernel read-only data: 18432k
[ 0.643498] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 0.644009] Freeing unused kernel image (rodata/data gap) memory: 1664K
[ 0.644016] rodata_test: all tests were successful
[ 0.644022] Run /init as init process
[ 0.644023] with arguments:
[ 0.644024] /init
[ 0.644025] copy2ram
[ 0.644026] noauto
[ 0.644027] with environment:
[ 0.644028] HOME=/
[ 0.644028] TERM=linux
[ 0.644029] BOOT_IMAGE=/boot/syslinux/vmlinuz
[ 0.686837] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input7
[ 0.687190] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[ 0.688860] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 0.726428] process '/usr/bin/ntfs-3g' started with executable stack
[ 0.802653] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 0.929750] usb 1-5: New USB device found, idVendor=0781, idProduct=55a5, bcdDevice= 1.00
[ 0.929758] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.929760] usb 1-5: Product: Cruzer Snap
[ 0.929763] usb 1-5: Manufacturer: SanDisk
[ 0.929765] usb 1-5: SerialNumber: 04016528101320121318
[ 0.930923] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 0.931462] scsi host2: usb-storage 1-5:1.0
[ 1.045603] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[ 1.181816] usb 1-8: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[ 1.181823] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.181826] usb 1-8: Product: HD User Facing
[ 1.181828] usb 1-8: Manufacturer: SunplusIT Inc
[ 1.298619] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ 1.426246] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[ 1.426253] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.936382] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Snap 1.00 PQ: 0 ANSI: 6
[ 1.937482] sd 2:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 1.938971] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.938977] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1.939567] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.943930] sdb: sdb1
[ 1.943981] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2.835015] loop0: detected capacity change from 0 to 174712
[ 30.232730] loop0: detected capacity change from 0 to 174712
[ 30.248481] loop1: detected capacity change from 0 to 249016
[ 30.262255] loop2: detected capacity change from 0 to 228328
[ 30.274333] loop3: detected capacity change from 0 to 35760
[ 30.288026] loop4: detected capacity change from 0 to 170232
[ 30.300001] loop5: detected capacity change from 0 to 70248
[ 30.312124] loop6: detected capacity change from 0 to 6416
[ 30.323922] loop7: detected capacity change from 0 to 256
[ 30.336014] loop8: detected capacity change from 0 to 16
[ 30.345833] REISERFS warning (device loop8): sh-2006 read_super_block: bread failed (dev loop8, block 2, size 4096)
[ 30.345839] REISERFS warning (device loop8): sh-2006 read_super_block: bread failed (dev loop8, block 16, size 4096)
[ 30.347942] loop9: detected capacity change from 0 to 8
[ 30.357827] REISERFS warning (device loop9): sh-2006 read_super_block: bread failed (dev loop9, block 2, size 4096)
[ 30.357833] REISERFS warning (device loop9): sh-2006 read_super_block: bread failed (dev loop9, block 16, size 4096)
[ 30.360334] loop10: detected capacity change from 0 to 42552
[ 30.374078] loop11: detected capacity change from 0 to 209968
[ 30.385399] loop12: detected capacity change from 0 to 13552
[ 30.396285] loop13: detected capacity change from 0 to 424
[ 42.045219] block device autoloading is deprecated and will be removed.
[ 42.045281] block device autoloading is deprecated and will be removed.
[ 42.045332] block device autoloading is deprecated and will be removed.
[ 42.045386] block device autoloading is deprecated and will be removed.
[ 42.045435] block device autoloading is deprecated and will be removed.
[ 42.045486] block device autoloading is deprecated and will be removed.
[ 42.045539] block device autoloading is deprecated and will be removed.
[ 42.433257] NET: Registered PF_INET6 protocol family
[ 42.433397] Segment Routing with IPv6
[ 42.433400] In-situ OAM (IOAM) with IPv6
[ 42.443012] udevd[681]: starting eudev-3.2.11
[ 42.477097] input: Intel HID events as /devices/platform/INTC1051:00/input/input9
[ 42.477161] intel-hid INTC1051:00: platform supports 5 button array
[ 42.477182] input: Intel HID 5 button array as /devices/platform/INTC1051:00/input/input10
[ 42.937287] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 42.939268] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 42.940002] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 42.940005] cfg80211: failed to load regulatory.db
[ 42.975720] Intel(R) Wireless WiFi driver for Linux
[ 42.976975] Bluetooth: Core ver 2.22
[ 42.976987] NET: Registered PF_BLUETOOTH protocol family
[ 42.976989] Bluetooth: HCI device and connection manager initialized
[ 42.976992] Bluetooth: HCI socket layer initialized
[ 42.976994] Bluetooth: L2CAP socket layer initialized
[ 42.976997] Bluetooth: SCO socket layer initialized
[ 43.000531] usbcore: registered new interface driver btusb
[ 43.001651] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[ 43.003357] Bluetooth: hci0: Device revision is 2
[ 43.003394] Bluetooth: hci0: Secure boot is enabled
[ 43.003414] Bluetooth: hci0: OTP lock is enabled
[ 43.003430] Bluetooth: hci0: API lock is enabled
[ 43.003443] Bluetooth: hci0: Debug lock is disabled
[ 43.003460] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 43.009785] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-19-0-4.sfi (-2)
[ 43.104394] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 43.104404] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[ 43.106193] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-hr-b0-72.ucode op_mode iwlmvm
[ 43.126745] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 43.133226] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 43.181702] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[ 43.221827] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[ 43.244974] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
[ 43.256918] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 43.272230] Console: switching to colour dummy device 80x25
[ 43.272263] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 43.272309] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 43.273214] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 43.280413] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 43.290294] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 43.290345] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 43.291100] i2c i2c-13: 2/2 memory slots populated (from DMI)
[ 43.291535] i2c i2c-13: Successfully instantiated SPD at 0x50
[ 43.355667] input: SYNA7DB5:01 06CB:CD41 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input11
[ 43.355729] input: SYNA7DB5:01 06CB:CD41 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input12
[ 43.355784] hid-generic 0018:06CB:CD41.0004: input,hidraw1: I2C HID v1.00 Mouse [SYNA7DB5:01 06CB:CD41] on i2c-SYNA7DB5:01
[ 43.359995] cryptd: max_cpu_qlen set to 1000
[ 43.364456] usb 1-8: Found UVC 1.00 device HD User Facing (0408:a061)
[ 43.369391] input: Logitech Wireless Device PID:406d Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input14
[ 43.369491] hid-generic 0003:046D:406D.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:406d] on usb-0000:00:14.0-3/input2:1
[ 43.381622] input: HD User Facing: HD User Facing as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
[ 43.381654] usbcore: registered new interface driver uvcvideo
[ 43.395212] AVX2 version of gcm_enc/dec engaged.
[ 43.395234] AES CTR mode by8 optimization enabled
[ 43.399711] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[ 43.399759] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 43.461689] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 43.461760] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 43.461932] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 43.461960] acer_wmi: Function bitmap for Communication Button: 0x801
[ 43.468429] input: Acer WMI hotkeys as /devices/virtual/input/input19
[ 43.522994] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[ 43.568710] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input20
[ 43.583827] logitech-hidpp-device 0003:046D:406D.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-3/input2:1
[ 43.589311] iwlwifi 0000:00:14.3: base HW address: 40:1c:83:d0:03:4a
[ 43.591004] input: SYNA7DB5:01 06CB:CD41 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input21
[ 43.591100] input: SYNA7DB5:01 06CB:CD41 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input22
[ 43.591190] hid-multitouch 0018:06CB:CD41.0004: input,hidraw2: I2C HID v1.00 Mouse [SYNA7DB5:01 06CB:CD41] on i2c-SYNA7DB5:01
[ 43.602945] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 08:97:98:dc:7a:d9, XID 541, IRQ 167
[ 43.602955] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 43.632667] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[ 43.673368] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 43.673455] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 43.673470] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 43.673691] intel_rapl_msr: PL4 support detected.
[ 43.673704] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 43.673724] intel_rapl_common: Found RAPL domain package
[ 43.673726] intel_rapl_common: Found RAPL domain core
[ 43.673728] intel_rapl_common: Found RAPL domain uncore
[ 43.808812] r8169 0000:01:00.0 eth0: Link is Down
[ 44.410789] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 44.412422] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 44.412875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[ 44.413189] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa0670d80)
[ 44.415939] fbcon: i915drmfb (fb0) is primary device
[ 44.442744] Console: switching to colour frame buffer device 240x67
[ 44.461936] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 44.475283] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[ 44.519054] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[ 44.519057] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 44.519059] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 44.519347] sof-audio-pci-intel-tgl 0000:00:1f.3: Direct firmware load for intel/sof/sof-tgl.ri failed with error -2
[ 44.519349] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
[ 44.519350] sof-audio-pci-intel-tgl 0000:00:1f.3: download it from https://github.com/thesofproject/sof-bin/
[ 44.519350] sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP firmware -2
[ 44.519612] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof_probe_work failed err: -2
[ 276.189159] wlan0: authenticate with 2c:99:24:e8:5f:c6
[ 276.193707] wlan0: send auth to 2c:99:24:e8:5f:c6 (try 1/3)
[ 276.220713] wlan0: authenticated
[ 276.221556] wlan0: associate with 2c:99:24:e8:5f:c6 (try 1/3)
[ 276.223109] wlan0: RX AssocResp from 2c:99:24:e8:5f:c6 (capab=0x411 status=0 aid=4)
[ 276.229477] wlan0: associated
[ 276.381493] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 2c:99:24:e8:5f:c6
[ 280.229873] wlan0: disassociated from 2c:99:24:e8:5f:c6 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 292.940920] wlan0: authenticate with 46:f0:da:5a:bd:a2
[ 292.947701] wlan0: send auth to 46:f0:da:5a:bd:a2 (try 1/3)
[ 293.097960] wlan0: authenticate with 46:f0:da:5a:bd:a2
[ 293.097971] wlan0: send auth to 46:f0:da:5a:bd:a2 (try 1/3)
[ 293.100296] wlan0: authenticated
[ 293.102546] wlan0: associate with 46:f0:da:5a:bd:a2 (try 1/3)
[ 293.109613] wlan0: RX AssocResp from 46:f0:da:5a:bd:a2 (capab=0x1531 status=0 aid=8)
[ 293.113891] wlan0: associated
[ 293.225282] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 587.936166] acer_wmi: Unknown function number - 9 - 0