Bluetooth and sound did not work

Here you can post about your various experiences with PC hardware. You can also post about hardware that is not compatible with the linux kernel or not recommended for use with Porteus.
beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#16 by beny » 05 Dec 2022, 20:16

show if you have a key or a switch that allow you the bluetooth on keyboard..
[bluetooth]# pairable on
Changing pairable on succeeded
[NEW] Device FC:D9:08:00:66:6D POCO X3 Pro
[CHG] Device FC:D9:08:00:66:6D RSSI: -63
[CHG] Device FC:D9:08:00:66:6D RSSI: -49
[bluetooth]# connect FC:D9:08:00:66:6D
Attempting to connect to FC:D9:08:00:66:6D
[CHG] Device FC:D9:08:00:66:6D Connected: yes
[CHG] Device FC:D9:08:00:66:6D Modalias: bluetooth:v038Fp1200d1436

CHG] Device FC:D9:08:00:66:6D ServicesResolved: yes
Request confirmation
[agent] Confirm passkey 503807 (yes/no): [CHG] Device FC:D9:08:00:66:6D RSSI: -41
[agent] Confirm passkey 503807 (yes/no): yes
[CHG] Device FC:D9:08:00:66:6D Paired: yes
Connection successful
[CHG] Device FC:D9:08:00:66:6D RSSI: -50
[CHG] Device FC:D9:08:00:66:6D RSSI: -58
[CHG] Device FC:D9:08:00:66:6D RSSI: -48
Authorize service
[agent] Authorize service 00001108-0000-1000-8000-00805f9b34fb (yes/no): yes
[CHG] Device FC:D9:08:00:66:6D RSSI: -66
[CHG] Device FC:D9:08:00:66:6D RSSI: -57
[CHG] Device FC:D9:08:00:66:6D RSSI: -48
[CHG] Controller 00:1A:7D:DA:71:0D UUIDs: 00001133-0000-1000-8000-00805f9b34fb

[CHG] Device FC:D9:08:00:66:6D RSSI: -56
[POCO X3 Pro]#
the only thing is i have not the stock kernel Linux porteus.example.net 6.0.11-porteus

User avatar
KingJames
White ninja
White ninja
Posts: 25
Joined: 26 Nov 2022, 17:20
Distribution: porteus5.0

Bluetooth and sound did not work

Post#17 by KingJames » 05 Dec 2022, 21:38

Okay, so I think I did it right. I downloaded and extracted the 6.0.7 file. Then I moved the 000-kernel module and the crippled_sources module to porteus/base and the vmlinuz to base/syslinux and rebooted. No errors. I then tried everything I have tried so far and had no success with either sound or bluetooth.
Porteus 5.0. I'm still learning linux. I hate Big Tech spying on me and I like open source. I am really enjoying Porteus. I keep it on a thumb drive and I copy to ram in less time than it takes Windows on my hard drive to boot up.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#18 by beny » 05 Dec 2022, 23:10

for the sound firmware try this package with the last one "removed"
and you have to know how to start the bluetooth device i think you have a combo of keys or so
Last edited by beny on 06 Dec 2022, 01:24, edited 1 time in total.

User avatar
KingJames
White ninja
White ninja
Posts: 25
Joined: 26 Nov 2022, 17:20
Distribution: porteus5.0

Bluetooth and sound did not work

Post#19 by KingJames » 05 Dec 2022, 23:31

After updating kernel, with no errors, I tried all of what has been suggested up till now, but with no success.
Porteus 5.0. I'm still learning linux. I hate Big Tech spying on me and I like open source. I am really enjoying Porteus. I keep it on a thumb drive and I copy to ram in less time than it takes Windows on my hard drive to boot up.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#20 by beny » 06 Dec 2022, 00:28

maybe a dmesg on terminal show if you have the firmware loaded

User avatar
KingJames
White ninja
White ninja
Posts: 25
Joined: 26 Nov 2022, 17:20
Distribution: porteus5.0

Bluetooth and sound did not work

Post#21 by KingJames » 06 Dec 2022, 00:38

Not sure why, but my posts don't seem to be going through.

Nothing improved after updating my kernel.
Porteus 5.0. I'm still learning linux. I hate Big Tech spying on me and I like open source. I am really enjoying Porteus. I keep it on a thumb drive and I copy to ram in less time than it takes Windows on my hard drive to boot up.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#22 by beny » 06 Dec 2022, 01:23

ok i have removed the mediafire software and i have build i hope a better one this is the link: https://www.mediafire.com/file/xvbcpitc ... 4.xzm/file try it in this there are some /usr/bin that are sof-tool but you have windows on your notebook?
after the install post a dmesg to know system run.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#23 by beny » 06 Dec 2022, 13:08

hi KingJames:this is the kernel module for your audio device but as you can see you need to load other module to work,and the firmware is loaded when the modules are loaded you can see all of this in terminal with lsmod that show you the kernel module loaded on time.
root@porteus:/home/guest# modinfo '/lib/modules/6.0.11-porteus/kernel/sound/soc/sof/intel/snd-sof-pci-intel-tgl.ko'
filename: /lib/modules/6.0.11-porteus/kernel/sound/soc/sof/intel/snd-sof-pci-intel-tgl.ko
import_ns: SND_SOC_SOF_PCI_DEV
import_ns: SND_SOC_SOF_INTEL_HDA_COMMON
license: Dual BSD/GPL
alias: pci:v00008086d000054C8sv*sd*bc*sc*i*
alias: pci:v00008086d000051CCsv*sd*bc*sc*i*
alias: pci:v00008086d000051CBsv*sd*bc*sc*i*
alias: pci:v00008086d000051CAsv*sd*bc*sc*i*
alias: pci:v00008086d000051C9sv*sd*bc*sc*i*
alias: pci:v00008086d000051CDsv*sd*bc*sc*i*
alias: pci:v00008086d000051C8sv*sd*bc*sc*i*
alias: pci:v00008086d00007A50sv*sd*bc*sc*i*
alias: pci:v00008086d00007AD0sv*sd*bc*sc*i*
alias: pci:v00008086d00004B58sv*sd*bc*sc*i*
alias: pci:v00008086d00004B55sv*sd*bc*sc*i*
alias: pci:v00008086d000043C8sv*sd*bc*sc*i*
alias: pci:v00008086d0000A0C8sv*sd*bc*sc*i*
depends: snd-soc-acpi-intel-match,snd-sof-intel-hda-common,snd-sof-pci
retpoline: Y
intree: Y
name: snd_sof_pci_intel_tgl
vermagic: 6.0.11-porteus SMP preempt mod_unload
sig_id: PKCS#7
signer: Build time autogenerated kernel key
sig_key: 13:83:13:34:F7:95:93:D5:33:C2:9B:32:4A:8A:04:27:B1:23:2D:F5
sig_hashalgo: sha1
signature: 40:5E:F7:E7:B9:A3:8D:EA:47:21:F2:F2:5E:81:60:3C:2D:5D:F7:8A:
BC:F8:55:DA:27:71:12:4E:02:D8:7E:F9:10:A5:0D:61:CF:A6:AE:15:
ED:62:63:84:8F:58:A5:E1:E4:56:28:B9:73:9B:A3:26:57:50:42:BD:
01:7D:23:B8:0B:2A:A9:FC:63:20:73:58:7F:85:3F:F4:98:1B:4E:DA:
94:DF:A5:89:A5:CF:4E:1A:70:B9:E4:F9:66:E6:74:DB:BD:81:62:67:
E8:09:68:AB:9E:88:44:18:0C:A9:8E:F7:D4:0A:BF:1B:FC:AC:30:9D:
F0:EB:6B:07:06:AB:E5:2D:DA:B4:C1:03:4C:9E:07:6E:02:74:E0:A3:
7D:57:BC:AB:15:20:95:5C:55:44:A3:4A:BC:45:E6:E6:1D:6B:DB:CC:
96:59:3D:90:27:35:9B:24:07:B7:6C:57:0B:64:09:38:15:3F:A4:06:
4B:CA:B9:3B:5C:48:56:2E:8F:FB:4E:FA:1B:FE:EE:07:A6:B1:71:25:
12:7C:1E:07:36:B5:CE:30:A1:7E:47:DC:C8:13:FF:E1:D0:61:B9:48:
46:E4:22:30:F1:87:09:52:D0:A6:F2:B8:70:49:B5:A7:44:2D:77:6C:
14:BA:AF:07:AF:D4:26:32:B2:A8:CD:7B:BF:C9:F8:6D:50:9D:71:6E:
5B:BF:35:2D:D5:3E:3A:3C:C5:D6:F0:58:3F:04:7F:B1:2E:5F:80:C1:
5D:AA:8B:AB:54:C5:D3:6B:47:30:F0:DB:62:44:0A:40:1C:B5:B6:D3:
7C:1A:0E:28:5E:27:4B:B1:CC:96:21:C1:AA:6C:20:4A:00:AE:43:41:
2F:98:A2:05:2E:7E:BA:F0:2E:A2:C4:01:02:12:D9:74:FD:C5:A8:B7:
26:88:77:66:09:DE:7F:E2:ED:F1:F5:C7:49:B9:E3:C8:BE:4B:75:61:
AD:44:01:7C:6C:08:31:73:D0:0E:F9:49:7B:81:F3:0B:92:ED:AF:C2:
40:CF:96:AF:96:CC:37:9E:FF:EE:A4:6C:65:E7:3C:AE:B1:8F:EE:5B:
2D:70:84:3F:33:56:08:70:66:71:97:DB:1F:0D:55:AB:77:9F:2C:02:
D3:4E:6A:FF:B1:8A:FD:9E:1E:28:8F:B3:BC:3F:41:AB:3A:50:17:EC:
88:97:5E:3A:86:D1:CE:77:B5:6C:74:6C:F3:49:F5:98:34:79:43:1B:
15:F7:2C:8D:69:9C:0B:77:89:A6:24:91:73:FA:4F:43:65:D3:AF:CB:
B5:57:B9:A7:0A:EF:03:C4:C2:20:A9:7F:DB:C0:D7:1A:6D:73:17:9B:
58:94:3B:47:F4:5A:5F:DE:D6:1A:F4:E7
root@porteus:/home/guest#

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Bluetooth and sound did not work

Post#24 by Blaze » 06 Dec 2022, 17:12

Hi KingJames
Thanks for your report.
Can you test sound with this kernel Porteus Kernel Builder (Пост Blaze #91916) ?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
KingJames
White ninja
White ninja
Posts: 25
Joined: 26 Nov 2022, 17:20
Distribution: porteus5.0

Bluetooth and sound did not work

Post#25 by KingJames » 07 Dec 2022, 03:43

Unfortunately, even using kernel 6.1 sound still doesn't work. I know Acer does some different stuff hardware wise, but I didn't know it was this out there.

I may be misreading something, but I am only using one sof module at a time. Should I use multiple of the different versions suggested here?

I tried running modinfo as suggested. I don't know how to read it, so I'll leave that to y'all.

Code: Select all

guest@porteus.example.net:~
$ modinfo /lib/modules/6.1.0-rc8-porteus/kernel/sound/soc/sof/intel/snd-sof-pci-intel-tgl.ko 
filename:       /lib/modules/6.1.0-rc8-porteus/kernel/sound/soc/sof/intel/snd-sof-pci-intel-tgl.ko
import_ns:      SND_SOC_SOF_PCI_DEV
import_ns:      SND_SOC_SOF_INTEL_HDA_COMMON
license:        Dual BSD/GPL
alias:          pci:v00008086d000054C8sv*sd*bc*sc*i*
alias:          pci:v00008086d000051CFsv*sd*bc*sc*i*
alias:          pci:v00008086d000051CEsv*sd*bc*sc*i*
alias:          pci:v00008086d000051CDsv*sd*bc*sc*i*
alias:          pci:v00008086d000051CCsv*sd*bc*sc*i*
alias:          pci:v00008086d000051CBsv*sd*bc*sc*i*
alias:          pci:v00008086d000051CAsv*sd*bc*sc*i*
alias:          pci:v00008086d000051C9sv*sd*bc*sc*i*
alias:          pci:v00008086d000051C8sv*sd*bc*sc*i*
alias:          pci:v00008086d00007A50sv*sd*bc*sc*i*
alias:          pci:v00008086d00007AD0sv*sd*bc*sc*i*
alias:          pci:v00008086d00004B58sv*sd*bc*sc*i*
alias:          pci:v00008086d00004B55sv*sd*bc*sc*i*
alias:          pci:v00008086d000043C8sv*sd*bc*sc*i*
alias:          pci:v00008086d0000A0C8sv*sd*bc*sc*i*
depends:        snd-soc-acpi-intel-match,snd-sof-intel-hda-common,snd-sof-pci
retpoline:      Y
intree:         Y
name:           snd_sof_pci_intel_tgl
vermagic:       6.1.0-rc8-porteus SMP preempt mod_unload 
sig_id:         PKCS#7
signer:         Build time autogenerated kernel key
sig_key:        50:D3:92:72:27:79:83:68:FD:AD:DD:A4:DF:66:1F:31:2C:B7:19:61
sig_hashalgo:   sha1
signature:      CA:84:B1:43:AF:4F:E3:9E:BF:9A:34:40:29:4C:39:72:D9:B4:89:D8:
                64:70:5C:21:EB:50:3C:E0:28:56:DA:DE:4D:8C:D0:5F:3B:49:19:E4:
                79:2A:17:95:F3:CC:3F:90:29:E4:FE:37:08:B6:F7:E0:50:63:5F:69:
                CA:DE:46:D4:BD:02:FF:DF:FC:BA:F7:46:53:2E:39:CF:6B:8B:31:AC:
                F3:33:33:8B:77:80:2C:FD:C7:E2:13:7A:DB:43:E8:BD:47:BF:BB:79:
                00:FE:CB:91:B4:2B:9C:CD:81:84:81:F4:46:E9:26:B2:A8:84:D9:36:
                10:EC:01:E1:09:BD:3F:C0:20:A5:F8:EE:33:F7:E7:C3:76:AB:F0:A6:
                7B:C6:99:19:F2:D5:6C:36:E9:98:24:9F:58:C6:3F:E2:07:FA:BB:90:
                6A:E4:F1:13:83:26:F4:70:96:4F:36:63:4B:25:52:A2:A5:46:92:00:
                F2:22:74:E7:D2:34:A2:EF:CC:02:BC:CB:9B:2E:B4:7C:82:7F:64:55:
                0E:C5:A8:B3:70:73:A1:CC:2F:F6:AF:E5:F2:AD:2E:D0:2D:9D:67:BF:
                03:E7:A7:13:43:CC:A7:BC:05:35:CB:3D:D7:3A:65:03:08:5D:FB:81:
                0B:33:CB:FB:42:01:55:18:46:D4:20:C8:42:7D:68:3E:A4:57:AA:DD:
                E0:49:C3:ED:40:52:10:02:EA:50:A0:04:6D:D2:36:BD:F9:13:1E:80:
                BB:9C:1B:8B:5F:D4:D7:2B:A4:E2:24:FE:95:E6:B1:F6:A3:D4:97:40:
                C2:02:B8:E5:45:A6:8C:0A:24:C8:80:90:E0:94:25:29:75:3F:89:9F:
                12:A0:EB:35:6D:73:E4:93:12:76:41:1F:10:93:4B:12:E7:9D:F2:01:
                F5:05:B0:6D:A1:F7:2F:BD:88:7E:7C:F3:6A:40:1D:7E:ED:08:E9:85:
                9B:07:71:AB:5E:36:4F:FC:CE:2C:71:6B:85:8D:82:60:5C:8B:ED:95:
                37:F4:9A:E4:D3:F9:96:88:6D:42:52:A2:EE:55:1C:8F:BD:35:26:66:
                26:A5:7A:02:C1:55:7B:BA:C8:46:6D:7D:FF:97:0A:96:85:CF:FA:F5:
                0C:1A:4C:87:64:9C:A3:8F:A7:5B:CE:2B:E0:82:7D:5C:AA:24:15:FB:
                A6:DA:EA:1D:CE:39:F9:43:CA:F1:03:2F:BC:A5:75:2D:4D:91:C3:9E:
                DC:32:74:B5:8D:82:0B:6C:E0:38:0C:AE:3C:61:B2:76:F2:8F:76:43:
                5E:90:CB:11:0C:2E:57:5C:75:F1:EB:BA:11:D5:82:1F:0F:C8:AF:04:
                C2:65:1B:1F:93:75:3D:F7:57:6C:EF:9A
@beny Yeah, I have Windows 10 on my hard drive. I went ahead and got your new compile for sof firmware, but still no result. Here is the result of dmesg. It's a mile long though, sorry, I don't know what to grep for.

Code: Select all

guest@porteus.example.net:~
$ dmesg 
[    0.000000] Linux version 6.1.0-rc8-porteus (root@porteus.example.net) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT_DYNAMIC Tue Dec  6 19:44:30 MSK 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz copy2ram noauto initrd=/boot/syslinux/initrd.xz
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.000000] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3632
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fd98fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fd99000-0x0000000040698fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040699000-0x00000000424aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000424af000-0x00000000442fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000442ff000-0x0000000044b2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000044b2f000-0x0000000044bfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000044bff000-0x0000000044bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000044c00000-0x0000000048ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000049e00000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff500000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b07fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by INSYDE Corp.
[    0.000000] efi: ACPI=0x44bfe000 ACPI 2.0=0x44bfe014 TPMFinalLog=0x44ac5000 SMBIOS=0x429de000 SMBIOS 3.0=0x429dc000 ESRT=0x3c2b0a98 RNG=0x44b78018 TPMEventLog=0x38545018 
[    0.000000] efi: seeding entropy pool
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: Acer Aspire A517-52/Jasmine_TL, BIOS V1.17 08/31/2021
[    0.000000] tsc: Detected 2400.000 MHz processor
[    0.000000] tsc: Detected 2419.200 MHz TSC
[    0.000005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000012] last_pfn = 0x2b0800 max_arch_pfn = 0x400000000
[    0.000098] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000728] last_pfn = 0x44c00 max_arch_pfn = 0x400000000
[    0.007694] esrt: Reserving ESRT space from 0x000000003c2b0a98 to 0x000000003c2b0ad0.
[    0.007697] e820: update [mem 0x3c2b0000-0x3c2b0fff] usable ==> reserved
[    0.007708] Using GB pages for direct mapping
[    0.008126] Secure boot disabled
[    0.008126] RAMDISK: [mem 0x4192d000-0x41a48fff]
[    0.008128] ACPI: Early table checksum verification disabled
[    0.008130] ACPI: RSDP 0x0000000044BFE014 000024 (v02 ACRSYS)
[    0.008132] ACPI: XSDT 0x0000000044BDB188 00011C (v01 ACRSYS ACRPRDCT 00000002      01000013)
[    0.008135] ACPI: FACP 0x0000000044BDE000 000114 (v06 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008139] ACPI: DSDT 0x0000000044B81000 059940 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008141] ACPI: FACS 0x0000000044AA2000 000040
[    0.008142] ACPI: UEFI 0x0000000044B2E000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.008144] ACPI: SSDT 0x0000000044BFA000 00255C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008146] ACPI: SSDT 0x0000000044BF9000 000100 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008148] ACPI: SSDT 0x0000000044BF6000 002137 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008150] ACPI: SSDT 0x0000000044BF2000 003300 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008151] ACPI: SSDT 0x0000000044BF1000 00077B (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008153] ACPI: TPM2 0x0000000044BF0000 00004C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008155] ACPI: MSDM 0x0000000044BEF000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.008157] ACPI: SSDT 0x0000000044BEE000 000D02 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008159] ACPI: NHLT 0x0000000044BEC000 001B54 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008160] ACPI: LPIT 0x0000000044BEB000 0000CC (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008162] ACPI: WSMT 0x0000000044BEA000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008164] ACPI: SSDT 0x0000000044BE9000 000B70 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008166] ACPI: SSDT 0x0000000044BE8000 00012A (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008168] ACPI: DBGP 0x0000000044BE7000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008169] ACPI: DBG2 0x0000000044BE6000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008171] ACPI: SSDT 0x0000000044BDF000 006A45 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008173] ACPI: HPET 0x0000000044BDD000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008175] ACPI: APIC 0x0000000044BDC000 00012C (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008176] ACPI: MCFG 0x0000000044BFD000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008178] ACPI: SSDT 0x0000000044B80000 000C78 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008180] ACPI: DMAR 0x0000000044B7F000 000088 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008182] ACPI: UEFI 0x0000000044A9F000 00063A (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008184] ACPI: UEFI 0x0000000044A9E000 00005C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.008186] ACPI: SSDT 0x0000000044B7E000 000985 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008187] ACPI: SSDT 0x0000000044B7D000 0000F8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.008189] ACPI: SSDT 0x0000000044B7C000 000835 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.008191] ACPI: FPDT 0x0000000044B7B000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.008193] ACPI: PTDT 0x0000000044B79000 000CFE (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[    0.008195] ACPI: BGRT 0x0000000044B7A000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.008196] ACPI: Reserving FACP table memory at [mem 0x44bde000-0x44bde113]
[    0.008197] ACPI: Reserving DSDT table memory at [mem 0x44b81000-0x44bda93f]
[    0.008197] ACPI: Reserving FACS table memory at [mem 0x44aa2000-0x44aa203f]
[    0.008198] ACPI: Reserving UEFI table memory at [mem 0x44b2e000-0x44b2e235]
[    0.008198] ACPI: Reserving SSDT table memory at [mem 0x44bfa000-0x44bfc55b]
[    0.008199] ACPI: Reserving SSDT table memory at [mem 0x44bf9000-0x44bf90ff]
[    0.008199] ACPI: Reserving SSDT table memory at [mem 0x44bf6000-0x44bf8136]
[    0.008200] ACPI: Reserving SSDT table memory at [mem 0x44bf2000-0x44bf52ff]
[    0.008200] ACPI: Reserving SSDT table memory at [mem 0x44bf1000-0x44bf177a]
[    0.008201] ACPI: Reserving TPM2 table memory at [mem 0x44bf0000-0x44bf004b]
[    0.008201] ACPI: Reserving MSDM table memory at [mem 0x44bef000-0x44bef054]
[    0.008202] ACPI: Reserving SSDT table memory at [mem 0x44bee000-0x44beed01]
[    0.008202] ACPI: Reserving NHLT table memory at [mem 0x44bec000-0x44bedb53]
[    0.008203] ACPI: Reserving LPIT table memory at [mem 0x44beb000-0x44beb0cb]
[    0.008203] ACPI: Reserving WSMT table memory at [mem 0x44bea000-0x44bea027]
[    0.008204] ACPI: Reserving SSDT table memory at [mem 0x44be9000-0x44be9b6f]
[    0.008204] ACPI: Reserving SSDT table memory at [mem 0x44be8000-0x44be8129]
[    0.008205] ACPI: Reserving DBGP table memory at [mem 0x44be7000-0x44be7033]
[    0.008205] ACPI: Reserving DBG2 table memory at [mem 0x44be6000-0x44be6053]
[    0.008206] ACPI: Reserving SSDT table memory at [mem 0x44bdf000-0x44be5a44]
[    0.008206] ACPI: Reserving HPET table memory at [mem 0x44bdd000-0x44bdd037]
[    0.008207] ACPI: Reserving APIC table memory at [mem 0x44bdc000-0x44bdc12b]
[    0.008207] ACPI: Reserving MCFG table memory at [mem 0x44bfd000-0x44bfd03b]
[    0.008208] ACPI: Reserving SSDT table memory at [mem 0x44b80000-0x44b80c77]
[    0.008208] ACPI: Reserving DMAR table memory at [mem 0x44b7f000-0x44b7f087]
[    0.008209] ACPI: Reserving UEFI table memory at [mem 0x44a9f000-0x44a9f639]
[    0.008209] ACPI: Reserving UEFI table memory at [mem 0x44a9e000-0x44a9e05b]
[    0.008210] ACPI: Reserving SSDT table memory at [mem 0x44b7e000-0x44b7e984]
[    0.008210] ACPI: Reserving SSDT table memory at [mem 0x44b7d000-0x44b7d0f7]
[    0.008211] ACPI: Reserving SSDT table memory at [mem 0x44b7c000-0x44b7c834]
[    0.008212] ACPI: Reserving FPDT table memory at [mem 0x44b7b000-0x44b7b043]
[    0.008212] ACPI: Reserving PTDT table memory at [mem 0x44b79000-0x44b79cfd]
[    0.008213] ACPI: Reserving BGRT table memory at [mem 0x44b7a000-0x44b7a037]
[    0.008235] No NUMA configuration found
[    0.008235] Faking a node at [mem 0x0000000000000000-0x00000002b07fffff]
[    0.008237] NODE_DATA(0) allocated [mem 0x2b07f8000-0x2b07fcfff]
[    0.008246] Zone ranges:
[    0.008246]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008247]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008248]   Normal   [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008249] Movable zone start for each node
[    0.008249] Early memory node ranges
[    0.008250]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008250]   node   0: [mem 0x0000000000100000-0x000000003fd98fff]
[    0.008251]   node   0: [mem 0x0000000040699000-0x00000000424aefff]
[    0.008251]   node   0: [mem 0x0000000044bff000-0x0000000044bfffff]
[    0.008252]   node   0: [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008253] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b07fffff]
[    0.008255] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008272] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009560] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.009617] On node 0, zone DMA32: 10064 pages in unavailable ranges
[    0.018045] On node 0, zone Normal: 13312 pages in unavailable ranges
[    0.018210] On node 0, zone Normal: 30720 pages in unavailable ranges
[    0.018231] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[    0.018540] ACPI: PM-Timer IO Port: 0x1808
[    0.018544] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.018545] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.018546] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.018546] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.018547] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.018547] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.018548] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.018548] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.018548] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.018549] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.018549] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.018550] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.018550] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.018550] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.018551] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.018551] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.018586] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.018589] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.018590] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.018594] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.018594] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.018596] TSC deadline timer available
[    0.018597] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.018601] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.018602] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.018603] PM: hibernation: Registered nosave memory: [mem 0x3c2b0000-0x3c2b0fff]
[    0.018603] PM: hibernation: Registered nosave memory: [mem 0x3fd99000-0x40698fff]
[    0.018604] PM: hibernation: Registered nosave memory: [mem 0x424af000-0x442fefff]
[    0.018604] PM: hibernation: Registered nosave memory: [mem 0x442ff000-0x44b2efff]
[    0.018605] PM: hibernation: Registered nosave memory: [mem 0x44b2f000-0x44bfefff]
[    0.018605] PM: hibernation: Registered nosave memory: [mem 0x44c00000-0x48ffffff]
[    0.018606] PM: hibernation: Registered nosave memory: [mem 0x49000000-0x49dfffff]
[    0.018606] PM: hibernation: Registered nosave memory: [mem 0x49e00000-0x4f7fffff]
[    0.018607] PM: hibernation: Registered nosave memory: [mem 0x4f800000-0xbfffffff]
[    0.018607] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[    0.018607] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe00ffff]
[    0.018608] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[    0.018608] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[    0.018608] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.018609] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xff4fffff]
[    0.018609] PM: hibernation: Registered nosave memory: [mem 0xff500000-0xffffffff]
[    0.018610] [mem 0x4f800000-0xbfffffff] available for PCI devices
[    0.018612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.023481] setup_percpu: NR_CPUS:32 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.023581] percpu: Embedded 44 pages/cpu s143208 r8192 d28824 u262144
[    0.023585] pcpu-alloc: s143208 r8192 d28824 u262144 alloc=1*2097152
[    0.023587] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.023597] Fallback order for Node 0: 0 
[    0.023598] Built 1 zonelists, mobility grouping on.  Total pages: 2008609
[    0.023599] Policy zone: Normal
[    0.023600] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz copy2ram noauto initrd=/boot/syslinux/initrd.xz
[    0.023644] Unknown kernel command line parameters "copy2ram noauto BOOT_IMAGE=/boot/syslinux/vmlinuz", will be passed to user space.
[    0.023661] random: crng init done
[    0.023874] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.023985] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.024043] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.024051] software IO TLB: area num 8.
[    0.039445] Memory: 7835648K/8162616K available (12289K kernel code, 1173K rwdata, 2432K rodata, 1268K init, 972K bss, 326712K reserved, 0K cma-reserved)
[    0.039469] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.039704] Dynamic Preempt: voluntary
[    0.039723] rcu: Preemptible hierarchical RCU implementation.
[    0.039724] rcu:     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[    0.039725]  Trampoline variant of Tasks RCU enabled.
[    0.039725]  Tracing variant of Tasks RCU enabled.
[    0.039725] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.039726] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.039753] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[    0.040018] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.040205] Console: colour dummy device 80x25
[    0.040215] printk: console [tty0] enabled
[    0.040224] ACPI: Core revision 20220331
[    0.040426] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.040427] APIC: Switch to symmetric I/O mode setup
[    0.040428] DMAR: Host address width 39
[    0.040429] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.040434] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[    0.040435] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.040440] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.040442] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[    0.040444] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.040445] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.042021] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.046504] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[    0.046509] Calibrating delay loop (skipped), value calculated using timer frequency.. 4838.40 BogoMIPS (lpj=2419200)
[    0.046511] pid_max: default: 32768 minimum: 301
[    0.047507] LSM: Security Framework initializing
[    0.047507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.047507] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.047507] CPU0: Thermal monitoring enabled (TM1)
[    0.047507] process: using mwait in idle threads
[    0.047507] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.047507] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.047507] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.047507] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[    0.047507] Spectre V2 : Mitigation: Enhanced IBRS
[    0.047507] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.047507] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.047507] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.047507] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.047507] Freeing SMP alternatives memory: 24K
[    0.047507] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[    0.047507] cblist_init_generic: Setting adjustable number of callback queues.
[    0.047507] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.047507] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.047507] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.047507] ... version:                5
[    0.047507] ... bit width:              48
[    0.047507] ... generic registers:      8
[    0.047507] ... value mask:             0000ffffffffffff
[    0.047507] ... max period:             00007fffffffffff
[    0.047507] ... fixed-purpose events:   4
[    0.047507] ... event mask:             0001000f000000ff
[    0.047507] Estimated ratio of average max frequency by base frequency (times 1024): 1621
[    0.047507] rcu: Hierarchical SRCU implementation.
[    0.047507] rcu:     Max phase no-delay instances is 400.
[    0.047507] smp: Bringing up secondary CPUs ...
[    0.047507] x86: Booting SMP configuration:
[    0.047507] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.052177] smp: Brought up 1 node, 8 CPUs
[    0.052177] smpboot: Max logical packages: 1
[    0.052177] smpboot: Total of 8 processors activated (38707.20 BogoMIPS)
[    0.052647] devtmpfs: initialized
[    0.052647] x86/mm: Memory block size: 128MB
[    0.052872] ACPI: PM: Registering ACPI NVS region [mem 0x442ff000-0x44b2efff] (8585216 bytes)
[    0.052872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.052872] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.052872] pinctrl core: initialized pinctrl subsystem
[    0.052885] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.053558] thermal_sys: Registered thermal governor 'bang_bang'
[    0.053559] thermal_sys: Registered thermal governor 'step_wise'
[    0.053559] thermal_sys: Registered thermal governor 'user_space'
[    0.053569] cpuidle: using governor ladder
[    0.053569] cpuidle: using governor menu
[    0.053569] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.053591] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.053595] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.053606] PCI: Using configuration type 1 for base access
[    0.053739] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.054528] raid6: skipped pq benchmark and selected avx512x4
[    0.054528] raid6: using avx512x2 recovery algorithm
[    0.054546] ACPI: Added _OSI(Module Device)
[    0.054546] ACPI: Added _OSI(Processor Device)
[    0.054547] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.054547] ACPI: Added _OSI(Processor Aggregator Device)
[    0.089007] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089013] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089016] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089018] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089021] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089023] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089107] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089110] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089112] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089114] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089117] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089119] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089120] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089123] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089125] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089126] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089129] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089132] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089133] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089136] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089138] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089140] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089143] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089145] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089146] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089149] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089151] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089152] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089155] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089158] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089159] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089162] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089164] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089165] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089168] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089171] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089172] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089175] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089177] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089178] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089181] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089183] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089185] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089188] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089190] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089191] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089194] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089196] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089294] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089297] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089299] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089300] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089303] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089305] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089387] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089390] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089392] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089393] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089397] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089399] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089528] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089531] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089534] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089535] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089538] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089540] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089542] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089545] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089547] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089548] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089551] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089553] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089555] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089558] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089560] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089561] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089564] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089566] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089568] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089571] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089573] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089574] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089577] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089579] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089580] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089583] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089585] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089587] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089589] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089592] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089593] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089596] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089598] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.089599] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20220331/dswload2-326)
[    0.089602] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20220331/psobject-220)
[    0.089604] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[    0.090540] ACPI: 14 ACPI AML tables successfully acquired and loaded
[    0.095641] ACPI: Dynamic OEM Table Load:
[    0.095649] ACPI: SSDT 0xFFFF888100972C00 0001C6 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.096181] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.098488] ACPI: Dynamic OEM Table Load:
[    0.098494] ACPI: SSDT 0xFFFF888100C8F400 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.099114] ACPI: Dynamic OEM Table Load:
[    0.099119] ACPI: SSDT 0xFFFF888100C84000 0005C3 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.099774] ACPI: Dynamic OEM Table Load:
[    0.099779] ACPI: SSDT 0xFFFF888100C8F800 00028B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.100477] ACPI: Dynamic OEM Table Load:
[    0.100483] ACPI: SSDT 0xFFFF88810006E000 0008E7 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.101176] ACPI: Dynamic OEM Table Load:
[    0.101180] ACPI: SSDT 0xFFFF888100C85800 00048A (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.101831] ACPI: Dynamic OEM Table Load:
[    0.101836] ACPI: SSDT 0xFFFF888100C86000 0004D4 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.102475] ACPI: Dynamic OEM Table Load:
[    0.102479] ACPI: SSDT 0xFFFF888100C86800 00048A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.106944] ACPI: EC: EC started
[    0.106944] ACPI: EC: interrupt blocked
[    0.107118] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.107119] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.107120] ACPI: Interpreter enabled
[    0.107150] ACPI: PM: (supports S0 S3 S4 S5)
[    0.107151] ACPI: Using IOAPIC for interrupt routing
[    0.107173] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.107174] PCI: Using E820 reservations for host bridge windows
[    0.109300] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.109653] ACPI: PM: Power Resource [PCRP]
[    0.109671] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.DGPV], AE_NOT_FOUND (20220331/psargs-330)
[    0.109676] ACPI Error: Aborting method \_SB.PC00.PEG0.PCRP._ON due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[    0.112468] ACPI: PM: Power Resource [BTRT]
[    0.117912] ACPI: PM: Power Resource [V0PR]
[    0.117980] ACPI: PM: Power Resource [V1PR]
[    0.118045] ACPI: PM: Power Resource [V2PR]
[    0.121530] ACPI: PM: Power Resource [WRST]
[    0.123504] ACPI: PM: Power Resource [V0PR]
[    0.123543] ACPI: PM: Power Resource [V1PR]
[    0.123575] ACPI: PM: Power Resource [V2PR]
[    0.123606] ACPI: PM: Power Resource [V3PR]
[    0.124966] ACPI: PM: Power Resource [FN00]
[    0.125001] ACPI: PM: Power Resource [FN01]
[    0.125034] ACPI: PM: Power Resource [FN02]
[    0.125067] ACPI: PM: Power Resource [FN03]
[    0.125099] ACPI: PM: Power Resource [FN04]
[    0.125459] ACPI: PM: Power Resource [PIN]
[    0.125650] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
[    0.125654] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.127816] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
[    0.130092] PCI host bridge to bus 0000:00
[    0.130093] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.130095] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.130096] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.130097] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window]
[    0.130098] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.130099] pci_bus 0000:00: root bus resource [bus 00-e0]
[    0.130172] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000
[    0.130277] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000
[    0.130285] pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
[    0.130291] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.130294] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.130307] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.130308] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.130310] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.130335] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[    0.130336] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[    0.130340] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[    0.130341] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[    0.130453] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
[    0.130462] pci 0000:00:08.0: reg 0x10: [mem 0x6003213000-0x6003213fff 64bit]
[    0.130567] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[    0.130579] pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
[    0.130584] pci 0000:00:0e.0: reg 0x18: [mem 0x50000000-0x51ffffff]
[    0.130596] pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
[    0.130798] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[    0.130820] pci 0000:00:14.0: reg 0x10: [mem 0x52100000-0x5210ffff 64bit]
[    0.130904] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.131125] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[    0.131149] pci 0000:00:14.2: reg 0x10: [mem 0x6003208000-0x600320bfff 64bit]
[    0.131165] pci 0000:00:14.2: reg 0x18: [mem 0x6003212000-0x6003212fff 64bit]
[    0.131312] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000
[    0.131356] pci 0000:00:14.3: reg 0x10: [mem 0x6003204000-0x6003207fff 64bit]
[    0.131494] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.131760] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[    0.131790] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.132070] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000
[    0.132104] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.132383] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[    0.132407] pci 0000:00:16.0: reg 0x10: [mem 0x600320f000-0x600320ffff 64bit]
[    0.132492] pci 0000:00:16.0: PME# supported from D3hot
[    0.132695] pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000
[    0.132979] pci 0000:00:19.0: [8086:a0c5] type 00 class 0x0c8000
[    0.133013] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.133292] pci 0000:00:19.1: [8086:a0c6] type 00 class 0x0c8000
[    0.133326] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.133627] pci 0000:00:1d.0: [8086:a0b0] type 01 class 0x060400
[    0.133730] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.133767] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.134094] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[    0.134336] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[    0.134380] pci 0000:00:1f.3: reg 0x10: [mem 0x6003200000-0x6003203fff 64bit]
[    0.134432] pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
[    0.134539] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.134766] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[    0.134792] pci 0000:00:1f.4: reg 0x10: [mem 0x600320c000-0x600320c0ff 64bit]
[    0.134821] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.134963] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[    0.134983] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.135145] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.135169] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.135199] pci 0000:01:00.0: reg 0x18: [mem 0x52004000-0x52004fff 64bit]
[    0.135218] pci 0000:01:00.0: reg 0x20: [mem 0x52000000-0x52003fff 64bit]
[    0.135343] pci 0000:01:00.0: supports D1 D2
[    0.135344] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.135534] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.135537] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.135540] pci 0000:00:1d.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.144752] Low-power S0 idle used by default for system suspend
[    0.150328] ACPI: EC: interrupt unblocked
[    0.150329] ACPI: EC: event unblocked
[    0.150344] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.150345] ACPI: EC: GPE=0x6e
[    0.150346] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.150347] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events
[    0.150375] iommu: Default domain type: Translated 
[    0.150376] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.150380] SCSI subsystem initialized
[    0.150380] libata version 3.00 loaded.
[    0.150380] ACPI: bus type USB registered
[    0.150380] usbcore: registered new interface driver usbfs
[    0.150380] usbcore: registered new interface driver hub
[    0.150380] usbcore: registered new device driver usb
[    0.150380] mc: Linux media interface: v0.10
[    0.150380] videodev: Linux video capture interface: v2.00
[    0.150380] pps_core: LinuxPPS API ver. 1 registered
[    0.150380] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.150380] PTP clock support registered
[    0.150519] Registered efivars operations
[    0.150533] Advanced Linux Sound Architecture Driver Initialized.
[    0.150607] PCI: Using ACPI for IRQ routing
[    0.170958] PCI: pci_cache_line_size set to 64 bytes
[    0.171103] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.171229] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.171230] e820: reserve RAM buffer [mem 0x3c2b0000-0x3fffffff]
[    0.171231] e820: reserve RAM buffer [mem 0x3fd99000-0x3fffffff]
[    0.171232] e820: reserve RAM buffer [mem 0x424af000-0x43ffffff]
[    0.171232] e820: reserve RAM buffer [mem 0x44c00000-0x47ffffff]
[    0.171233] e820: reserve RAM buffer [mem 0x2b0800000-0x2b3ffffff]
[    0.171240] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.171240] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.171240] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.171240] vgaarb: loaded
[    0.171240] clocksource: Switched to clocksource tsc-early
[    0.171240] pnp: PnP ACPI init
[    0.171240] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.171240] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.171240] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.171240] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.171240] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[    0.171240] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[    0.171240] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.171240] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.171240] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.171240] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.171240] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.171240] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.171569] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.171570] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.171571] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
[    0.171572] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
[    0.171573] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[    0.171575] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.171576] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.171577] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.171578] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.171578] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.171735] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.171935] pnp: PnP ACPI: found 8 devices
[    0.177054] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.177084] NET: Registered PF_INET protocol family
[    0.177149] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.178229] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.178237] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.178240] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.178289] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.178465] TCP: Hash tables configured (established 65536 bind 65536)
[    0.178485] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.178498] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.178529] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.178535] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[    0.178539] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178542] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[    0.178545] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178546] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[    0.178548] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178550] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[    0.178608] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178609] pci 0000:00:15.3: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[    0.178669] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178670] pci 0000:00:19.0: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit]
[    0.178725] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178726] pci 0000:00:19.1: BAR 0: assigned [mem 0x4017003000-0x4017003fff 64bit]
[    0.178785] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff]
[    0.178787] pci 0000:00:1f.5: BAR 0: assigned [mem 0x4f800000-0x4f800fff]
[    0.178798] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.178800] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.178804] pci 0000:00:1d.0:   bridge window [mem 0x52000000-0x520fffff]
[    0.178810] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.178812] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.178812] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.178813] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xbfffffff window]
[    0.178814] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.178815] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.178816] pci_bus 0000:01: resource 1 [mem 0x52000000-0x520fffff]
[    0.180928] PCI: CLS 64 bytes, default 64
[    0.180940] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.180940] software IO TLB: mapped [mem 0x0000000034545000-0x0000000038545000] (64MB)
[    0.180957] Unpacking initramfs...
[    0.180993] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
[    0.180995] caller 0xffffffff81013aba mapping multiple BARs
[    0.181104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22df1149949, max_idle_ns: 440795312789 ns
[    0.181112] clocksource: Switched to clocksource tsc
[    0.181287] Initialise system trusted keyrings
[    0.181304] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[    0.181866] zbud: loaded
[    0.182039] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.182064] ntfs: driver 2.1.32 [Flags: R/W].
[    0.182086] ntfs3: Max link count 4000
[    0.182087] ntfs3: Enabled Linux POSIX ACLs support
[    0.182087] ntfs3: Read-only LZX/Xpress compression included
[    0.182100] fuse: init (API version 7.37)
[    0.182149] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.182367] aufs 6.x-rcN-20221107
[    0.189684] xor: automatically using best checksumming function   avx       
[    0.189685] Key type asymmetric registered
[    0.189685] Asymmetric key parser 'x509' registered
[    0.189690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.191739] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.192164] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[    0.192165] pci_bus 10000:e0: root bus resource [bus e0-ff]
[    0.192167] pci_bus 10000:e0: root bus resource [mem 0x50000000-0x51ffffff]
[    0.192168] pci_bus 10000:e0: root bus resource [mem 0x6003102000-0x60031fffff 64bit]
[    0.192193] pci 10000:e0:17.0: [8086:a0d3] type 00 class 0x010601
[    0.192214] pci 10000:e0:17.0: reg 0x10: [mem 0x00000000-0x00001fff]
[    0.192225] pci 10000:e0:17.0: reg 0x14: [mem 0x00000000-0x000000ff]
[    0.192237] pci 10000:e0:17.0: reg 0x18: [io  0x0000-0x0007]
[    0.192248] pci 10000:e0:17.0: reg 0x1c: [io  0x0000-0x0003]
[    0.192259] pci 10000:e0:17.0: reg 0x20: [io  0x0000-0x001f]
[    0.192270] pci 10000:e0:17.0: reg 0x24: [mem 0x50000000-0x500007ff]
[    0.192314] pci 10000:e0:17.0: PME# supported from D3hot
[    0.192351] pci 10000:e0:1c.0: [8086:09ab] type 00 class 0x088000
[    0.192402] pci 10000:e0:1c.4: [8086:a0bc] type 01 class 0x060400
[    0.192504] pci 10000:e0:1c.4: PME# supported from D0 D3hot D3cold
[    0.192545] pci 10000:e0:1c.4: PTM enabled (root), 4ns granularity
[    0.192606] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.192649] pci 10000:e1:00.0: [15b7:5009] type 00 class 0x010802
[    0.192680] pci 10000:e1:00.0: reg 0x10: [mem 0x50100000-0x50103fff 64bit]
[    0.192724] pci 10000:e1:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit]
[    0.192966] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.192968] pci 10000:e0:1c.4:   bridge window [io  0x0000-0x0fff]
[    0.192971] pci 10000:e0:1c.4:   bridge window [mem 0x50100000-0x501fffff]
[    0.192977] pci 10000:e0:1c.4: Primary bus is hard wired to 0
[    0.196155] pci 10000:e0:1c.4: BAR 14: assigned [mem 0x50000000-0x500fffff]
[    0.196157] pci 10000:e0:17.0: BAR 0: assigned [mem 0x50100000-0x50101fff]
[    0.196161] pci 10000:e0:1c.4: BAR 13: no space for [io  size 0x1000]
[    0.196162] pci 10000:e0:1c.4: BAR 13: failed to assign [io  size 0x1000]
[    0.196163] pci 10000:e0:17.0: BAR 5: assigned [mem 0x50102000-0x501027ff]
[    0.196167] pci 10000:e0:17.0: BAR 1: assigned [mem 0x50102800-0x501028ff]
[    0.196171] pci 10000:e0:17.0: BAR 4: no space for [io  size 0x0020]
[    0.196172] pci 10000:e0:17.0: BAR 4: failed to assign [io  size 0x0020]
[    0.196172] pci 10000:e0:17.0: BAR 2: no space for [io  size 0x0008]
[    0.196173] pci 10000:e0:17.0: BAR 2: failed to assign [io  size 0x0008]
[    0.196174] pci 10000:e0:17.0: BAR 3: no space for [io  size 0x0004]
[    0.196175] pci 10000:e0:17.0: BAR 3: failed to assign [io  size 0x0004]
[    0.196177] pci 10000:e1:00.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit]
[    0.196190] pci 10000:e1:00.0: BAR 4: assigned [mem 0x50004000-0x500040ff 64bit]
[    0.196204] pci 10000:e0:1c.4: PCI bridge to [bus e1]
[    0.196209] pci 10000:e0:1c.4:   bridge window [mem 0x50000000-0x500fffff]
[    0.196226] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.196227] pcieport 10000:e0:1c.4: PCI INT A: no GSI
[    0.196270] pcieport 10000:e0:1c.4: PME: Signaling with IRQ 142
[    0.196335] vmd 0000:00:0e.0: Bound to PCI domain 10000
[    0.196491] Monitor-Mwait will be used to enter C-1 state
[    0.196513] Monitor-Mwait will be used to enter C-2 state
[    0.196517] Monitor-Mwait will be used to enter C-3 state
[    0.196519] ACPI: \_SB_.PR00: Found 3 idle states
[    0.196839] ACPI: AC: AC Adapter [ACAD] (on-line)
[    0.196877] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/PNP0C0D:00/input/input0
[    0.196888] ACPI: button: Lid Switch [LID0]
[    0.196914] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.196924] ACPI: button: Sleep Button [SLPB]
[    0.196941] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.196961] ACPI: button: Power Button [PWRB]
[    0.198214] thermal LNXTHERM:00: registered as thermal_zone0
[    0.198215] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.198455] hpet_acpi_add: no address or irqs in _CRS
[    0.198467] Linux agpgart interface v0.103
[    0.198512] ACPI: bus type drm_connector registered
[    0.198952] ACPI: battery: Slot [BAT1] (battery present)
[    0.200310] loop: module loaded
[    0.200331] usbcore: registered new interface driver rtsx_usb
[    0.200632] nvme nvme0: pci function 10000:e1:00.0
[    0.200641] pcieport 10000:e0:1c.4: can't derive routing for PCI INT A
[    0.200644] nvme 10000:e1:00.0: PCI INT A: no GSI
[    0.200653] ahci 10000:e0:17.0: version 3.0
[    0.200659] ahci 10000:e0:17.0: can't derive routing for PCI INT A
[    0.200660] ahci 10000:e0:17.0: PCI INT A: no GSI
[    0.209077] nvme nvme0: 8/0/0 default/read/poll queues
[    0.210801] ahci 10000:e0:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.210803] ahci 10000:e0:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    0.210955] scsi host0: ahci
[    0.211009] scsi host1: ahci
[    0.211029] ata1: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102100 irq 144
[    0.211032] ata2: SATA max UDMA/133 abar m2048@0x50102000 port 0x50102180 irq 144
[    0.211282] Fusion MPT base driver 3.04.20
[    0.211283] Copyright (c) 1999-2008 LSI Corporation
[    0.211285] Fusion MPT SPI Host driver 3.04.20
[    0.211290] Fusion MPT SAS Host driver 3.04.20
[    0.211435] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.211438] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.212284]  nvme0n1: p1 p2 p3 p4
[    0.212539] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[    0.212743] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.212744] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.212746] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.212765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    0.212767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.212768] usb usb1: Product: xHCI Host Controller
[    0.212769] usb usb1: Manufacturer: Linux 6.1.0-rc8-porteus xhci-hcd
[    0.212769] usb usb1: SerialNumber: 0000:00:14.0
[    0.212866] hub 1-0:1.0: USB hub found
[    0.212887] hub 1-0:1.0: 12 ports detected
[    0.213288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    0.213289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.213290] usb usb2: Product: xHCI Host Controller
[    0.213291] usb usb2: Manufacturer: Linux 6.1.0-rc8-porteus xhci-hcd
[    0.213292] usb usb2: SerialNumber: 0000:00:14.0
[    0.213328] hub 2-0:1.0: USB hub found
[    0.213341] hub 2-0:1.0: 4 ports detected
[    0.213586] usbcore: registered new interface driver uas
[    0.213593] usbcore: registered new interface driver usb-storage
[    0.213596] usbcore: registered new interface driver ums-alauda
[    0.213598] usbcore: registered new interface driver ums-cypress
[    0.213600] usbcore: registered new interface driver ums-datafab
[    0.213602] usbcore: registered new interface driver ums_eneub6250
[    0.213605] usbcore: registered new interface driver ums-freecom
[    0.213607] usbcore: registered new interface driver ums-isd200
[    0.213609] usbcore: registered new interface driver ums-jumpshot
[    0.213612] usbcore: registered new interface driver ums-karma
[    0.213614] usbcore: registered new interface driver ums-onetouch
[    0.213617] usbcore: registered new interface driver ums-realtek
[    0.213619] usbcore: registered new interface driver ums-sddr09
[    0.213621] usbcore: registered new interface driver ums-sddr55
[    0.213623] usbcore: registered new interface driver ums-usbat
[    0.213625] usbcore: registered new device driver apple-mfi-fastcharge
[    0.213643] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.213644] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.214291] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.214353] mousedev: PS/2 mouse device common for all mice
[    0.214413] rtc_cmos 00:01: RTC can wake from S4
[    0.215256] rtc_cmos 00:01: registered as rtc0
[    0.215430] rtc_cmos 00:01: setting system clock to 2022-12-06T21:33:37 UTC (1670362417)
[    0.215432] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.215770] intel_pstate: Intel P-state driver initializing
[    0.216062] intel_pstate: HWP enabled
[    0.216068] sdhci: Secure Digital Host Controller Interface driver
[    0.216068] sdhci: Copyright(c) Pierre Ossman
[    0.216085] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    0.216086] wbsd: Copyright(c) Pierre Ossman
[    0.216098] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    0.216133] usbcore: registered new interface driver vub300
[    0.216137] usbcore: registered new interface driver ushc
[    0.216145] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.216188] efifb: probing for efifb
[    0.216194] efifb: framebuffer at 0x4000000000, using 1200k, total 1200k
[    0.216195] efifb: mode is 640x480x32, linelength=2560, pages=1
[    0.216196] efifb: scrolling: redraw
[    0.216196] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.216254] Console: switching to colour frame buffer device 80x30
[    0.216514] fb0: EFI VGA frame buffer device
[    0.216528] hid: raw HID events driver (C) Jiri Kosina
[    0.216538] usbcore: registered new interface driver usbhid
[    0.216538] usbhid: USB HID core driver
[    0.216594] intel_pmc_core INT33A1:00:  initialized
[    0.216679] NET: Registered PF_PACKET protocol family
[    0.217244] microcode: sig=0x806c1, pf=0x80, revision=0x8a
[    0.217261] microcode: Microcode Update Driver: v2.2.
[    0.217263] IPI shorthand broadcast: enabled
[    0.217272] sched_clock: Marking stable (210892075, 6320625)->(233302426, -16089726)
[    0.217307] registered taskstats version 1
[    0.217309] Loading compiled-in X.509 certificates
[    0.224592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.255819] Freeing initrd memory: 1136K
[    0.256562] Loaded X.509 cert 'Build time autogenerated kernel key: 0594721612a5a30944a4d50a8efc71f940c7e6d3'
[    0.256624] zswap: loaded using pool lzo/zbud
[    0.256717] Key type .fscrypt registered
[    0.256717] Key type fscrypt-provisioning registered
[    0.256858] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[    0.256968] Key type encrypted registered
[    0.257338] ALSA device list:
[    0.257339]   No soundcards found.
[    0.448671] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    0.518154] ata2: SATA link down (SStatus 0 SControl 300)
[    0.518274] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.518865] ata1.00: ATA-10: WDC WD10SPZX-21Z10T0, 02.01A02, max UDMA/133
[    0.520308] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.520317] ata1.00: Features: NCQ-prio
[    0.522782] ata1.00: configured for UDMA/133
[    0.522928] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPZX-21Z 1A02 PQ: 0 ANSI: 5
[    0.523431] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.523437] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.523457] sd 0:0:0:0: [sda] Write Protect is off
[    0.523461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.523486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.523628] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.578165] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    0.578174] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.578177] usb 1-3: Product: USB Receiver
[    0.578179] usb 1-3: Manufacturer: Logitech
[    0.581409] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0001/input/input4
[    0.632967] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    0.635205] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input5
[    0.635466] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input6
[    0.636717]  sda: sda1
[    0.636900] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.637341] Freeing unused kernel image (initmem) memory: 1268K
[    0.642633] Write protecting the kernel read-only data: 18432k
[    0.643498] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.644009] Freeing unused kernel image (rodata/data gap) memory: 1664K
[    0.644016] rodata_test: all tests were successful
[    0.644022] Run /init as init process
[    0.644023]   with arguments:
[    0.644024]     /init
[    0.644025]     copy2ram
[    0.644026]     noauto
[    0.644027]   with environment:
[    0.644028]     HOME=/
[    0.644028]     TERM=linux
[    0.644029]     BOOT_IMAGE=/boot/syslinux/vmlinuz
[    0.686837] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0002/input/input7
[    0.687190] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    0.688860] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    0.726428] process '/usr/bin/ntfs-3g' started with executable stack
[    0.802653] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    0.929750] usb 1-5: New USB device found, idVendor=0781, idProduct=55a5, bcdDevice= 1.00
[    0.929758] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.929760] usb 1-5: Product: Cruzer Snap
[    0.929763] usb 1-5: Manufacturer: SanDisk
[    0.929765] usb 1-5: SerialNumber: 04016528101320121318
[    0.930923] usb-storage 1-5:1.0: USB Mass Storage device detected
[    0.931462] scsi host2: usb-storage 1-5:1.0
[    1.045603] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    1.181816] usb 1-8: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[    1.181823] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.181826] usb 1-8: Product: HD User Facing
[    1.181828] usb 1-8: Manufacturer: SunplusIT Inc
[    1.298619] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[    1.426246] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    1.426253] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.936382] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Snap      1.00 PQ: 0 ANSI: 6
[    1.937482] sd 2:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[    1.938971] sd 2:0:0:0: [sdb] Write Protect is off
[    1.938977] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    1.939567] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.943930]  sdb: sdb1
[    1.943981] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.835015] loop0: detected capacity change from 0 to 174712
[   30.232730] loop0: detected capacity change from 0 to 174712
[   30.248481] loop1: detected capacity change from 0 to 249016
[   30.262255] loop2: detected capacity change from 0 to 228328
[   30.274333] loop3: detected capacity change from 0 to 35760
[   30.288026] loop4: detected capacity change from 0 to 170232
[   30.300001] loop5: detected capacity change from 0 to 70248
[   30.312124] loop6: detected capacity change from 0 to 6416
[   30.323922] loop7: detected capacity change from 0 to 256
[   30.336014] loop8: detected capacity change from 0 to 16
[   30.345833] REISERFS warning (device loop8): sh-2006 read_super_block: bread failed (dev loop8, block 2, size 4096)
[   30.345839] REISERFS warning (device loop8): sh-2006 read_super_block: bread failed (dev loop8, block 16, size 4096)
[   30.347942] loop9: detected capacity change from 0 to 8
[   30.357827] REISERFS warning (device loop9): sh-2006 read_super_block: bread failed (dev loop9, block 2, size 4096)
[   30.357833] REISERFS warning (device loop9): sh-2006 read_super_block: bread failed (dev loop9, block 16, size 4096)
[   30.360334] loop10: detected capacity change from 0 to 42552
[   30.374078] loop11: detected capacity change from 0 to 209968
[   30.385399] loop12: detected capacity change from 0 to 13552
[   30.396285] loop13: detected capacity change from 0 to 424
[   42.045219] block device autoloading is deprecated and will be removed.
[   42.045281] block device autoloading is deprecated and will be removed.
[   42.045332] block device autoloading is deprecated and will be removed.
[   42.045386] block device autoloading is deprecated and will be removed.
[   42.045435] block device autoloading is deprecated and will be removed.
[   42.045486] block device autoloading is deprecated and will be removed.
[   42.045539] block device autoloading is deprecated and will be removed.
[   42.433257] NET: Registered PF_INET6 protocol family
[   42.433397] Segment Routing with IPv6
[   42.433400] In-situ OAM (IOAM) with IPv6
[   42.443012] udevd[681]: starting eudev-3.2.11
[   42.477097] input: Intel HID events as /devices/platform/INTC1051:00/input/input9
[   42.477161] intel-hid INTC1051:00: platform supports 5 button array
[   42.477182] input: Intel HID 5 button array as /devices/platform/INTC1051:00/input/input10
[   42.937287] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   42.939268] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   42.940002] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   42.940005] cfg80211: failed to load regulatory.db
[   42.975720] Intel(R) Wireless WiFi driver for Linux
[   42.976975] Bluetooth: Core ver 2.22
[   42.976987] NET: Registered PF_BLUETOOTH protocol family
[   42.976989] Bluetooth: HCI device and connection manager initialized
[   42.976992] Bluetooth: HCI socket layer initialized
[   42.976994] Bluetooth: L2CAP socket layer initialized
[   42.976997] Bluetooth: SCO socket layer initialized
[   43.000531] usbcore: registered new interface driver btusb
[   43.001651] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018
[   43.003357] Bluetooth: hci0: Device revision is 2
[   43.003394] Bluetooth: hci0: Secure boot is enabled
[   43.003414] Bluetooth: hci0: OTP lock is enabled
[   43.003430] Bluetooth: hci0: API lock is enabled
[   43.003443] Bluetooth: hci0: Debug lock is disabled
[   43.003460] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   43.009785] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-19-0-4.sfi (-2)
[   43.104394] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[   43.104404] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[   43.106193] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-hr-b0-72.ucode op_mode iwlmvm
[   43.126745] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   43.133226] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[   43.181702] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[   43.221827] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[   43.244974] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
[   43.256918] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[   43.272230] Console: switching to colour dummy device 80x25
[   43.272263] i915 0000:00:02.0: vgaarb: deactivate vga console
[   43.272309] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[   43.273214] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   43.280413] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[   43.290294] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   43.290345] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   43.291100] i2c i2c-13: 2/2 memory slots populated (from DMI)
[   43.291535] i2c i2c-13: Successfully instantiated SPD at 0x50
[   43.355667] input: SYNA7DB5:01 06CB:CD41 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input11
[   43.355729] input: SYNA7DB5:01 06CB:CD41 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input12
[   43.355784] hid-generic 0018:06CB:CD41.0004: input,hidraw1: I2C HID v1.00 Mouse [SYNA7DB5:01 06CB:CD41] on i2c-SYNA7DB5:01
[   43.359995] cryptd: max_cpu_qlen set to 1000
[   43.364456] usb 1-8: Found UVC 1.00 device HD User Facing (0408:a061)
[   43.369391] input: Logitech Wireless Device PID:406d Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input14
[   43.369491] hid-generic 0003:046D:406D.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:406d] on usb-0000:00:14.0-3/input2:1
[   43.381622] input: HD User Facing: HD User Facing as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
[   43.381654] usbcore: registered new interface driver uvcvideo
[   43.395212] AVX2 version of gcm_enc/dec engaged.
[   43.395234] AES CTR mode by8 optimization enabled
[   43.399711] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[   43.399759] thermal thermal_zone2: failed to read out thermal zone (-61)
[   43.461689] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[   43.461760] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[   43.461932] acer_wmi: Acer Laptop ACPI-WMI Extras
[   43.461960] acer_wmi: Function bitmap for Communication Button: 0x801
[   43.468429] input: Acer WMI hotkeys as /devices/virtual/input/input19
[   43.522994] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[   43.568710] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input20
[   43.583827] logitech-hidpp-device 0003:046D:406D.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-3/input2:1
[   43.589311] iwlwifi 0000:00:14.3: base HW address: 40:1c:83:d0:03:4a
[   43.591004] input: SYNA7DB5:01 06CB:CD41 Mouse as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input21
[   43.591100] input: SYNA7DB5:01 06CB:CD41 Touchpad as /devices/pci0000:00/0000:00:15.3/i2c_designware.1/i2c-1/i2c-SYNA7DB5:01/0018:06CB:CD41.0004/input/input22
[   43.591190] hid-multitouch 0018:06CB:CD41.0004: input,hidraw2: I2C HID v1.00 Mouse [SYNA7DB5:01 06CB:CD41] on i2c-SYNA7DB5:01
[   43.602945] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 08:97:98:dc:7a:d9, XID 541, IRQ 167
[   43.602955] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   43.632667] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[   43.673368] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[   43.673455] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[   43.673470] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[   43.673691] intel_rapl_msr: PL4 support detected.
[   43.673704] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[   43.673724] intel_rapl_common: Found RAPL domain package
[   43.673726] intel_rapl_common: Found RAPL domain core
[   43.673728] intel_rapl_common: Found RAPL domain uncore
[   43.808812] r8169 0000:01:00.0 eth0: Link is Down
[   44.410789] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   44.412422] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   44.412875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[   44.413189] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa0670d80)
[   44.415939] fbcon: i915drmfb (fb0) is primary device
[   44.442744] Console: switching to colour frame buffer device 240x67
[   44.461936] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   44.475283] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[   44.519054] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[   44.519057] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[   44.519059] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[   44.519347] sof-audio-pci-intel-tgl 0000:00:1f.3: Direct firmware load for intel/sof/sof-tgl.ri failed with error -2
[   44.519349] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
[   44.519350] sof-audio-pci-intel-tgl 0000:00:1f.3:        download it from https://github.com/thesofproject/sof-bin/
[   44.519350] sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP firmware -2
[   44.519612] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof_probe_work failed err: -2
[  276.189159] wlan0: authenticate with 2c:99:24:e8:5f:c6
[  276.193707] wlan0: send auth to 2c:99:24:e8:5f:c6 (try 1/3)
[  276.220713] wlan0: authenticated
[  276.221556] wlan0: associate with 2c:99:24:e8:5f:c6 (try 1/3)
[  276.223109] wlan0: RX AssocResp from 2c:99:24:e8:5f:c6 (capab=0x411 status=0 aid=4)
[  276.229477] wlan0: associated
[  276.381493] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 2c:99:24:e8:5f:c6
[  280.229873] wlan0: disassociated from 2c:99:24:e8:5f:c6 (Reason: 2=PREV_AUTH_NOT_VALID)
[  292.940920] wlan0: authenticate with 46:f0:da:5a:bd:a2
[  292.947701] wlan0: send auth to 46:f0:da:5a:bd:a2 (try 1/3)
[  293.097960] wlan0: authenticate with 46:f0:da:5a:bd:a2
[  293.097971] wlan0: send auth to 46:f0:da:5a:bd:a2 (try 1/3)
[  293.100296] wlan0: authenticated
[  293.102546] wlan0: associate with 46:f0:da:5a:bd:a2 (try 1/3)
[  293.109613] wlan0: RX AssocResp from 46:f0:da:5a:bd:a2 (capab=0x1531 status=0 aid=8)
[  293.113891] wlan0: associated
[  293.225282] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  587.936166] acer_wmi: Unknown function number - 9 - 0
Porteus 5.0. I'm still learning linux. I hate Big Tech spying on me and I like open source. I am really enjoying Porteus. I keep it on a thumb drive and I copy to ram in less time than it takes Windows on my hard drive to boot up.

User avatar
babam
Warlord
Warlord
Posts: 526
Joined: 16 Nov 2016, 10:30
Distribution: Porteus 5.0rc3 Xfce K6.1.1
Location: Rainy city

Bluetooth and sound did not work

Post#26 by babam » 07 Dec 2022, 05:43

KingJames wrote:
29 Nov 2022, 03:05
I'm having the same problem on an Acer Aspire 5. Copied driver for wifi works but I can't get Bluetooth or sound to work.
For audio:
https://drive.google.com/uc?export=down ... Zdya_Bc354

Reboot

Open terminal:

Code: Select all

pulseaudio -k && sudo alsa force-reload
For bluetooth, download and copy to /lib/firmware/intel (persistent) or create an xzm module/rootcopy.
https://anduin.linuxfromscratch.org/BLF ... 19-0-4.ddc
https://anduin.linuxfromscratch.org/BLF ... 19-0-4.sfi

Reboot
Sorry, my English is bad.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#27 by beny » 07 Dec 2022, 11:09

hi all we need is on system

Code: Select all

 guest@porteus:~$  ls /lib/firmware/intel
IntcSST2.bin
dsp_fw_bxtn.bin@
dsp_fw_bxtn_v2219.bin
dsp_fw_bxtn_v3366.bin
dsp_fw_cnl.bin@
dsp_fw_cnl_v1191.bin
dsp_fw_cnl_v1858.bin
dsp_fw_glk.bin@
dsp_fw_glk_v1814.bin
dsp_fw_glk_v2768.bin
dsp_fw_glk_v2880.bin
dsp_fw_glk_v3366.bin
dsp_fw_kbl.bin@
dsp_fw_kbl_v1037.bin
dsp_fw_kbl_v2042.bin
dsp_fw_kbl_v2630.bin
dsp_fw_kbl_v3266.bin
dsp_fw_kbl_v3402.bin
dsp_fw_kbl_v3420.bin
dsp_fw_kbl_v701.bin
dsp_fw_release.bin@
dsp_fw_release_v3402.bin
dsp_fw_release_v969.bin
fw_sst_0f28.bin
fw_sst_0f28.bin-48kHz_i2s_master
fw_sst_0f28_ssp0.bin
fw_sst_22a8.bin
ibt-0040-0041.ddc
ibt-0040-0041.sfi
ibt-0040-1020.ddc
ibt-0040-1020.sfi
ibt-0040-2120.ddc
ibt-0040-2120.sfi
ibt-0040-4150.ddc
ibt-0040-4150.sfi
ibt-0041-0041.ddc
ibt-0041-0041.sfi
ibt-1040-0041.ddc
ibt-1040-0041.sfi
ibt-1040-1020.ddc
ibt-1040-1020.sfi
ibt-1040-2120.ddc
ibt-1040-2120.sfi
ibt-1040-4150.ddc
ibt-1040-4150.sfi
ibt-11-5.ddc
ibt-11-5.sfi
ibt-12-16.ddc
ibt-12-16.sfi
ibt-17-0-1.ddc
ibt-17-0-1.sfi
ibt-17-1.ddc
ibt-17-1.sfi
ibt-17-16-1.ddc
ibt-17-16-1.sfi
ibt-17-2.ddc
ibt-17-2.sfi
ibt-18-0-1.ddc
ibt-18-0-1.sfi
ibt-18-1.ddc
ibt-18-1.sfi
ibt-18-16-1.ddc
ibt-18-16-1.sfi
ibt-18-2.ddc
ibt-18-2.sfi
ibt-19-0-0.ddc
ibt-19-0-0.sfi
ibt-19-0-1.ddc
ibt-19-0-1.sfi
ibt-19-0-4.ddc
ibt-19-0-4.sfi
ibt-19-16-4.ddc
ibt-19-16-4.sfi
ibt-19-240-1.ddc
ibt-19-240-1.sfi
ibt-19-240-4.ddc
ibt-19-240-4.sfi
ibt-19-32-0.ddc
ibt-19-32-0.sfi
ibt-19-32-1.ddc
ibt-19-32-1.sfi
ibt-19-32-4.ddc
ibt-19-32-4.sfi
ibt-20-0-3.ddc
ibt-20-0-3.sfi
ibt-20-1-3.ddc
ibt-20-1-3.sfi
ibt-20-1-4.ddc
ibt-20-1-4.sfi
ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
ibt-hw-37.7.bseq
ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
ibt-hw-37.8.bseq
ice/
ipu3-fw.bin@
irci_irci_ecr-master_20161208_0213_20170112_1500.bin
sof-tplg-v2.2.2/
sof-v2.2.2/
guest@porteus:~$ 

                                

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Bluetooth and sound did not work

Post#28 by Blaze » 07 Dec 2022, 15:23

beny, agree with you.
Do you know where we can get these stuff as module (I mean all in one)?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Bluetooth and sound did not work

Post#29 by beny » 07 Dec 2022, 15:34

please in terminal: lspci -nnk
hi blaze there is something weird with this system,also inxi -F give us the right answer, can you read this tread that i have found:https://forums.gentoo.org/viewtopic-t-1 ... art-0.html seem that firmware and modules have to build static to work
but i can go wrong on this. see kernel driver and module are the same version

Code: Select all

 bash-5.2# lspci -nnk 
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge [1002:5957]
	Subsystem: ASRock Incorporation A770CrossFire Motherboard [1849:5957]
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978]
	Subsystem: ASRock Incorporation A770CrossFire Motherboard [1849:5957]
	Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c]
	Subsystem: ASRock Incorporation RD790 PCI to PCI bridge (PCI express gpp port C) [1849:5957]
	Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d]
	Subsystem: ASRock Incorporation RX780/RD790 PCI to PCI bridge (PCI express gpp port D) [1849:5957]
	Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e]
	Subsystem: ASRock Incorporation A770CrossFire Motherboard [1849:5957]
	Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f]
	Subsystem: ASRock Incorporation A770CrossFire Motherboard [1849:5957]
	Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1849:4391]
	Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1849:4397]
	Kernel driver in use: ohci-pci
00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398]
	Subsystem: ASRock Incorporation SB7x0 USB OHCI1 Controller [1849:4398]
	Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 USB EHCI Controller [1849:4396]
	Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1849:4397]
	Kernel driver in use: ohci-pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398]
	Subsystem: ASRock Incorporation SB7x0 USB OHCI1 Controller [1849:4398]
	Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 USB EHCI Controller [1849:4396]
	Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3c)
	Subsystem: ASRock Incorporation SBx00 SMBus Controller [1849:4385]
	Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 IDE Controller [1849:439c]
	Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: ASRock Incorporation SBx00 Azalia (Intel HDA) [1849:7662]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 LPC host controller [1849:439d]
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384]
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
	Subsystem: ASRock Incorporation SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1849:4399]
	Kernel driver in use: ohci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
	Kernel driver in use: fam15h_power
	Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107 [GeForce GT 740] [10de:0fc8] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] GK107 [GeForce GT 740] [1462:8a9e]
	Kernel driver in use: nouveau
	Kernel modules: nvidiafb, nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] GK107 HDMI Audio Controller [1462:8a9e]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev 10)
	Subsystem: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100]
	Kernel driver in use: xhci_hcd
03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01)
	Subsystem: ASRock Incorporation ASM1062 Serial ATA Controller [1849:1060]
	Kernel driver in use: ahci
04:00.0 USB controller [0c03]: Etron Technology, Inc. EJ188/EJ198 USB 3.0 Host Controller [1b6f:7052]
	Subsystem: ASRock Incorporation QC5000-ITX/PH [1849:7052]
	Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
	Kernel driver in use: r8169
	Kernel modules: r8169
bash-5.2# 

                                                                           

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Bluetooth and sound did not work

Post#30 by Ed_P » 07 Dec 2022, 20:59

beny wrote:
07 Dec 2022, 15:34
inxi -F give us the right answer
??

Code: Select all

root@porteus:/home/guest# inxi -F
bash: inxi: command not found
lspci -nnk works.
Ed

Post Reply