Sound not working

Here you can post about your various experiences with PC hardware. You can also post about hardware that is not compatible with the linux kernel or not recommended for use with Porteus.
BenBooth1344
Ronin
Ronin
Posts: 3
Joined: 23 Apr 2024, 12:32
Distribution: Porteus v5.01

Sound not working

Post#1 by BenBooth1344 » 25 Apr 2024, 19:24

I have Porteus v5.01 KDE5 installed on my old chromebook.

I have only "Dummy Audio" as an audio device and neither the built-in speakers or 3.5mm jack headphones show up.

Audio works on LUbuntu

Does anyone have any recomendations on how to fix this?

Some system details:

Code: Select all

guest@porteus:~$ cat /proc/asound/cards
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0x91314000 irq 315
 1 [chtrt5650      ]: chtrt5650 - chtrt5650
                      GOOGLE-Reks-1.0

Code: Select all

guest@porteus:~$ inxi -A
Audio:
  Device-1: Intel driver: snd_hda_intel
  Sound Server-1: ALSA v: k6.6.20-porteus running: yes
  Sound Server-2: PulseAudio v: 15.0 running: yes

Code: Select all

sudo dmesg | egrep -i 'rtl|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded|broad|touch|elan|screen|input'Password: 
[    0.000000] BIOS-provided physical RAM map:
[    0.005416] No NUMA configuration found
[    0.110527] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.120372] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.121578] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.123287] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.148970] libata version 3.00 loaded.
[    0.179440] vgaarb: loaded
[    0.183749] pnp: PnP ACPI: found 9 devices
[    0.202035] zbud: loaded
[    0.202731] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.225622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.246339] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.246481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.259861] loop: module loaded
[    0.263064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    0.263287] hub 1-0:1.0: USB hub found
[    0.263731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.263918] hub 2-0:1.0: USB hub found
[    0.264480] usbcore: registered new interface driver ums-onetouch
[    0.267502] i8042: Warning: Keylock active
[    0.269307] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 21)
[    0.271606] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 21)
[    0.272019] ACPI: \: failed to evaluate _DSM a53ec1f6-cd65-1f46-ab7a-29f7e8d5bd61 (0x1001)
[    0.272053] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    0.273211] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.275970] IPI shorthand broadcast: enabled
[    0.364892] Loaded X.509 cert 'Build time autogenerated kernel key: e079c55cfec89f76147f440f05d0b6cfa11e1642'
[    0.368577] Btrfs loaded, zoned=no, fsverity=no
[    0.371572]   No soundcards found.
[    0.488341] EXT4-fs (mmcblk0p2): mounted filesystem 7b430210-fde6-4ad9-b8d9-b0bdc60db2fc r/w with ordered data mode. Quota mode: disabled.
[    0.698548] usb 1-4: New USB device found, idVendor=0408, idProduct=2010, bcdDevice= 0.05
[    0.955091] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
[    2.078836] ipv6: module verification failed: signature and/or required key missing - tainting kernel
[    3.322990] elants_i2c i2c-ELAN0001:00: supply vcc33 not found, using dummy regulator
[    3.323054] elants_i2c i2c-ELAN0001:00: supply vccio not found, using dummy regulator
[    3.323145] elants_i2c i2c-ELAN0001:00: nothing at this address
[    3.353040] elan_i2c i2c-ELAN0000:00: supply vcc not found, using dummy regulator
[    3.494261] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x007c, Firmware: 0x0003, Sample: 0x0003, IAP: 0x000d
[    3.495631] input: Elan Touchpad as /devices/pci0000:00/808622C1:05/i2c-2/i2c-ELAN0000:00/input/input4
[    3.762871] rt5645 i2c-10EC5650:00: supply avdd not found, using dummy regulator
[    3.762929] rt5645 i2c-10EC5650:00: supply cpvdd not found, using dummy regulator
[    3.775724] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[    3.775748] intel_sst_acpi 808622A8:00: request fw failed
[    4.474986] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.475525] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    4.477265] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.477276] cfg80211: failed to load regulatory.db
[    4.687866] iwlwifi 0000:02:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0
[    4.688213] iwlwifi 0000:02:00.0: PCI dev 095b/5210, rev=0x210, rfid=0xd55555d5
[    4.776397] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[    4.776408] iwlwifi 0000:02:00.0: Found debug configuration: 0
[    4.777222] iwlwifi 0000:02:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[    4.808381] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    6.411360] input: chtrt5650 Headset as /devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card1/input6
[    6.748150] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    6.748275] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    6.748478] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.831809] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    6.831958] thermal thermal_zone0: failed to read out thermal zone (-61)
[    6.878942] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    6.880520] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    6.919152] iwlwifi 0000:02:00.0: base HW address: dc:a9:71:f4:6a:46, OTP minor version: 0x0
[    6.938563] usb 1-4: Found UVC 1.00 device Chromebook HD Camera (0408:2010)
[    7.014105] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.073907] intel_rapl_common: Found RAPL domain package
[    7.073917] intel_rapl_common: Found RAPL domain core
[    7.595061] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[    8.441248] Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated
[    8.472315] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    8.581637] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    8.585799] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[    8.633110] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0
[    8.689376] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    8.810974] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    8.821167] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[   16.105292] wlan0: authenticate with 60:d2:48:f8:d6:7a
[   16.105331] wlan0: 80 MHz not supported, disabling VHT
[   16.121688] wlan0: send auth to 60:d2:48:f8:d6:7a (try 1/3)
[   16.128221] wlan0: authenticated
[   16.136763] wlan0: associate with 60:d2:48:f8:d6:7a (try 1/3)
[   16.139275] wlan0: RX AssocResp from 60:d2:48:f8:d6:7a (capab=0x831 status=0 aid=3)
[   16.143479] wlan0: associated
[   27.654121] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   28.491599] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[   28.491614] intel_sst_acpi 808622A8:00: request fw failed -2
[   28.491617] intel_sst_acpi 808622A8:00: FW download fail -2
[   29.518909] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3
[   29.518923] intel_sst_acpi 808622A8:00: fw returned err -16
[   29.518938] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on ssp2-port: -16
[   29.518948]  SSP2-Codec: ASoC: error at __soc_pcm_open on SSP2-Codec: -16
[   29.518954]  Audio Port: ASoC: error at dpcm_be_dai_startup on Audio Port: -16
[   29.518958]  Audio Port: ASoC: error at dpcm_fe_dai_startup on Audio Port: -16

nanZor
Shogun
Shogun
Posts: 406
Joined: 09 Apr 2019, 03:27
Distribution: Porteus 5.01 x86-64 LXQT

Sound not working

Post#2 by nanZor » 08 Aug 2024, 07:29

Nothing specific, but from this distance with a WAG, be sure you are playing audio when you check the audio control - at least on my chromebox it is "dummy" until something is playing. Just in case..

And, check the Volume Control > Configuration tab. On some hardware, I've had to manually change it myself from data/hdmi out to an analog setting like analog-stereo-duplex. One cheap piece of gear always gets the auto-detection wrong, so with this so I have to change the Config manually.
That's a UNIX book - cool. -Garth

nanZor
Shogun
Shogun
Posts: 406
Joined: 09 Apr 2019, 03:27
Distribution: Porteus 5.01 x86-64 LXQT

Sound not working

Post#3 by nanZor » 27 Sep 2024, 10:43

Oh wow, just ran into this on an Intel NUC (NUC6ayh model) with 5.01 of Porteus, PorteuX, and Nemesis! No cards are detected.

I just liberated it from an old Win10 install (on a 5400rpm drive!), and other bootable linux finds it. Surprising. Seems to be just limited to this one in my pile. I'll keep looking for model-specific issue - but across all three in the Port* family? Weird. Inxi shows no cards, aplay -l find nothing. I'll dig.

Not a showstopper since I can always use a usb<>audio dongle for my earbuds, but this has me puzzled! :%)
That's a UNIX book - cool. -Garth

Post Reply