does not work for me.
I copied firmware esfw3e.bin from Epson Perfection 1270 to /usr/share/sane/snapscan
Opened /etc/sane.d/snapscan.conf
found
Code: Select all
firmware /usr/share/sane/snapscan/your-firmwarefile.bin
Code: Select all
firmware /usr/share/sane/snapscan/esfw3e.bin
Code: Select all
sed -i 's|^firmware.*|firmware /usr/share/sane/snapscan/esfw3e.bin|' /etc/sane.d/snapscan.conf
Code: Select all
sane-find-scanner
Code: Select all
found USB scanner (vendor=0x04b8 [EPSON], product=0x0120 [EPSON Scanner]) at libusb:001:002
Code: Select all
# Epson Perfection 1270
usb 0x04b8 0x0120
Code: Select all
scanimage -L
Code: Select all
device `snapscan:libusb:001:005' is a EPSON EPSON Scanner flatbed scanner
I tried to run simple-scan, but I don't have success in it.
Code: Select all
root@blaze:~# simple-scan
(simple-scan:2675): Gdk-WARNING **: gdk_window_set_icon_list: icons too large
[snapscan] Scanner warming up - waiting 6 seconds.
** (simple-scan:2675): WARNING **: Unable to start device: Error during device I/O
Error segmentation
root@blaze:~#
BTW, VueScan is working for me. But this program is shareware (not free).