printing-3.2 for porteus 3.2

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Cant get parallel HP6L printer to work with lan printser

Post#196 by Blaze » 02 Feb 2017, 19:04

Hi wii07 and iVAN.
Can you try latest versions of 07-printing modules in Always Fresh mode?
07-printing-i586-18.01.2017.xzm
07-printing-x86_64-18.01.2017.xzm
Plus run these commands

Code: Select all

su
toor
/etc/rc.d/rc.cups stop
rm -rf /var/spool/cups
/etc/rc.d/rc.cups start
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

wii07
White ninja
White ninja
Posts: 20
Joined: 28 Dec 2016, 23:25
Distribution: Porteus 3.2.2 64 bit
Location: Germany

Re: Cant get parallel HP6L printer to work with lan printser

Post#197 by wii07 » 02 Feb 2017, 20:15

Thx alot, working perfect now, also in the "normal" porteus mode. :good:

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: printing-3.2 for porteus 3.2

Post#198 by Blaze » 03 Feb 2017, 18:26

07-printing-i586-03.02.2017.xzm
07-printing-x86_64-03.02.2017.xzm

Changelog
Added drivers for Canon support

UFR II/UFR II LT Printer Driver for Linux V3.30
Linux_UFRII_PrinterDriver_V330_uk_EN.tar.gz
(cndrvcups-common-3.70-1.x86_64.rpm and cndrvcups-ufr2-uk-3.30-1.x86_64.rpm)
http://www.canon-europe.com/support/bus ... t-support/

Tweak

rm -rf /printing-module/var/spool/cups

Removed

exo-0.10.7-x86_64-1.txz
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: printing-3.2 for porteus 3.2

Post#199 by Blaze » 29 Mar 2017, 19:53

HP LaserJet 2420 printer in Porteus
Image
This printer is detected automatically and all works fine.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: printing-3.2 for porteus 3.2

Post#200 by Blaze » 09 Apr 2017, 16:19

The Gutenprint project is pleased to announce Gutenprint 5.2.12. This release adds support for many new printers and other improvements over
5.2.11. Note that the Foomatic data generator and the Ghostscript IJS driver have been removed as CUPS support is ubiquitous and Foomatic is not needed with CUPS.
http://gimp-print.sourceforge.net/
I have one question. The packages foomatic-filters, ghostscript, ghostscript-fonts-std does not need in 07-printing module?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
francois
Contributor
Contributor
Posts: 6433
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: printing-3.2 for porteus 3.2

Post#201 by francois » 29 Apr 2017, 01:57

Modules:
07-printing-x86_64-03.02.2017.xzm
python-2.7.11-x86_64-2.xzm


Error message:

Code: Select all

root@porteus:/mnt/sda5/64_V32/porteus/modules# system-config-printer
  File "/usr/share/system-config-printer/system-config-printer.py", line 32
    except RuntimeError, e:
                       ^
SyntaxError: invalid syntax
root@porteus:/mnt/sda5/64_V32/porteus/modules# 
Any idea?

Thanks.
Prendre son temps, profiter de celui qui passe.

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: printing-3.2 for porteus 3.2

Post#202 by Blaze » 29 Apr 2017, 10:38

francois, in porteus current

Code: Select all

guest@porteus:~$ find /var/log/packages/ -iname *python*
/var/log/packages/python-2.7.13-x86_64-1
guest@porteus:~$ uname -a
Linux porteus 4.10.8-porteus #1 SMP PREEMPT Sat Apr 1 22:30:16 Local time zone must be set--s x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
guest@porteus:~$ system-config-printer
Traceback (most recent call last):
  File "/usr/share/system-config-printer/system-config-printer.py", line 29, in <module>
    import dbus
  File "/usr/lib64/python2.7/site-packages/dbus/__init__.py", line 77, in <module>
    import dbus.types as types
  File "/usr/lib64/python2.7/site-packages/dbus/types.py", line 6, in <module>
    from _dbus_bindings import (
ImportError: /usr/lib64/python2.7/site-packages/_dbus_bindings.so: undefined symbol: PyUnicodeUCS2_FromStringAndSize
guest@porteus:~$
The old python of printing module + a new python = crash =@ :D
Update of printing module will solve this problem :)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
francois
Contributor
Contributor
Posts: 6433
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: printing-3.2 for porteus 3.2

Post#203 by francois » 30 Apr 2017, 02:00

This is under kde5 (plasma) desktop. New python was what was needed. But also, I have been working with a corrupt changes file. :(

But now output error for simple scan

Code: Select all

root@porteus:~/Downloads# simple-scan
simple-scan: error while loading shared libraries: libgphoto2.so.6: cannot open shared object file: No such file or directory
root@porteus:~/Downloads# 
:
Prendre son temps, profiter de celui qui passe.

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: printing-3.2 for porteus 3.2

Post#204 by Blaze » 30 Apr 2017, 09:27

francois, in Porteus current with XFCE DE - all is good

Code: Select all

root@porteus:~# ldd /usr/bin/simple-scan | grep gphoto
	libgphoto2.so.6 => /usr/lib64/libgphoto2.so.6 (0x00007f9c1b1db000)
	libgphoto2_port.so.12 => /usr/lib64/libgphoto2_port.so.12 (0x00007f9c1afd0000)
root@porteus:~# find /var/log/packages -iname *gphoto*
/var/log/packages/libgphoto2-2.5.13-x86_64-1
root@porteus:~#
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
francois
Contributor
Contributor
Posts: 6433
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: printing-3.2 for porteus 3.2

Post#205 by francois » 01 May 2017, 01:48

In kde:

Code: Select all

root@porteus:~# ldd /usr/bin/simple-scan | grep gphoto
        libgphoto2.so.6 => not found
        libgphoto2_port.so.12 => not found
root@porteus:~# 
And installed:
libgphoto2-2.5.10-x86_64-1.txz

So for kde5 missing packages for printing are:
python-2.7.13-x86_64-2_slack14.2.xzm
tcl-8.6.5-x86_64-2.xzm
tk-8.6.5-x86_64-2.xzm

libgphoto2-2.5.10-x86_64-1.xzm :)
Prendre son temps, profiter de celui qui passe.

User avatar
amplatfus
Samurai
Samurai
Posts: 153
Joined: 30 Oct 2012, 14:55
Distribution: MATE Porteus-v5.0rc1
Location: Romania

Re: printing-3.2 for porteus 3.2

Post#206 by amplatfus » 23 Jul 2017, 07:20

sci_fi wrote:Good morning,

Thanks to everyone for the suggestions. Printing is now working for me. I re-installed the latest 07-printing module, re-did the configuration via CUPS and boot in always fresh mode and all is well.

Again thank you for the help. I am now totally transitioned to 3.2.2.

Best regards,

sci_fi
Hi,

Could you please share the printing.xzm? With the one from dl.porteus.org I have error: printer can't create temporary file.

Many thanks!
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm

User avatar
Ed_P
Contributor
Contributor
Posts: 8315
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

printing-3.2 for porteus 3.2

Post#207 by Ed_P » 23 Jul 2017, 13:13

Ed

User avatar
amplatfus
Samurai
Samurai
Posts: 153
Joined: 30 Oct 2012, 14:55
Distribution: MATE Porteus-v5.0rc1
Location: Romania

printing-3.2 for porteus 3.2

Post#208 by amplatfus » 23 Jul 2017, 13:33

Ed_P wrote:
23 Jul 2017, 13:13
Have you seen this posting amplatfus?

Re: Printing problems (Vers. 3.2.2 Xfce) (Post by Blaze #56946)
Thank you so much!
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm

User avatar
amplatfus
Samurai
Samurai
Posts: 153
Joined: 30 Oct 2012, 14:55
Distribution: MATE Porteus-v5.0rc1
Location: Romania

printing-3.2 for porteus 3.2

Post#209 by amplatfus » 23 Jul 2017, 20:17

Hi,

I can print with version 07-printing-i586-18.01.2017.xzm, is working, but I have red error at logout:

Code: Select all

No module named PyQt4.OtCore. Unable to load Ot4/Ot5 sussport Is it installed?.
Please do you have it too? I tested with MATE Porteus 3.2.2
Image

Edit: correct version active with this error is 07-printing-x86_64-03.02.2017.xzm The error appears randomly.

Thank you,
amplatfus
Last edited by amplatfus on 24 Jul 2017, 11:39, edited 1 time in total.
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm

User avatar
Blaze
DEV Team
DEV Team
Posts: 3860
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

printing-3.2 for porteus 3.2

Post#210 by Blaze » 24 Jul 2017, 08:10

amplatfus, it's strange and 18.01.2017 is not stable.
Look at this post Re: Printing and scanning for Porteus 4.0 (Пост Blaze #55162)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

Post Reply