New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#196
by Blaze » 02 Feb 2017, 19:04
Hi
wii07 and
iVAN.
Can you try latest versions of 07-printing modules in Always Fresh mode?
07-printing-i586-18.01.2017.xzm
07-printing-x86_64-18.01.2017.xzm
Plus run these commands
Code: Select all
su
toor
/etc/rc.d/rc.cups stop
rm -rf /var/spool/cups
/etc/rc.d/rc.cups start
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
wii07
- White ninja
- Posts: 20
- Joined: 28 Dec 2016, 23:25
- Distribution: Porteus 3.2.2 64 bit
- Location: Germany
Post#197
by wii07 » 02 Feb 2017, 20:15
Thx alot, working perfect now, also in the "normal" porteus mode.
wii07
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#198
by Blaze » 03 Feb 2017, 18:26
07-printing-i586-03.02.2017.xzm
07-printing-x86_64-03.02.2017.xzm
Changelog
Added drivers for Canon support
UFR II/UFR II LT Printer Driver for Linux V3.30
Linux_UFRII_PrinterDriver_V330_uk_EN.tar.gz
(cndrvcups-common-3.70-1.x86_64.rpm and cndrvcups-ufr2-uk-3.30-1.x86_64.rpm)
http://www.canon-europe.com/support/bus ... t-support/
Tweak
rm -rf /printing-module/var/spool/cups
Removed
exo-0.10.7-x86_64-1.txz
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#199
by Blaze » 29 Mar 2017, 19:53
HP LaserJet 2420 printer in Porteus
This printer is detected automatically and all works fine.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#200
by Blaze » 09 Apr 2017, 16:19
The Gutenprint project is pleased to announce Gutenprint 5.2.12. This release adds support for many new printers and other improvements over
5.2.11.
Note that the Foomatic data generator and the Ghostscript IJS driver have been removed as CUPS support is ubiquitous and Foomatic is not needed with CUPS.
http://gimp-print.sourceforge.net/
I have one question. The packages foomatic-filters, ghostscript, ghostscript-fonts-std does not need in 07-printing module?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
francois
- Contributor
- Posts: 6435
- Joined: 28 Dec 2010, 14:25
- Distribution: xfce plank porteus nemesis
- Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.
Post#201
by francois » 29 Apr 2017, 01:57
Modules:
07-printing-x86_64-03.02.2017.xzm
python-2.7.11-x86_64-2.xzm
Error message:
Code: Select all
root@porteus:/mnt/sda5/64_V32/porteus/modules# system-config-printer
File "/usr/share/system-config-printer/system-config-printer.py", line 32
except RuntimeError, e:
^
SyntaxError: invalid syntax
root@porteus:/mnt/sda5/64_V32/porteus/modules#
Any idea?
Thanks.
Prendre son temps, profiter de celui qui passe.
francois
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#202
by Blaze » 29 Apr 2017, 10:38
francois, in porteus current
Code: Select all
guest@porteus:~$ find /var/log/packages/ -iname *python*
/var/log/packages/python-2.7.13-x86_64-1
guest@porteus:~$ uname -a
Linux porteus 4.10.8-porteus #1 SMP PREEMPT Sat Apr 1 22:30:16 Local time zone must be set--s x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
guest@porteus:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 29, in <module>
import dbus
File "/usr/lib64/python2.7/site-packages/dbus/__init__.py", line 77, in <module>
import dbus.types as types
File "/usr/lib64/python2.7/site-packages/dbus/types.py", line 6, in <module>
from _dbus_bindings import (
ImportError: /usr/lib64/python2.7/site-packages/_dbus_bindings.so: undefined symbol: PyUnicodeUCS2_FromStringAndSize
guest@porteus:~$
The old python of printing module + a new python = crash
Update of printing module will solve this problem
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
francois
- Contributor
- Posts: 6435
- Joined: 28 Dec 2010, 14:25
- Distribution: xfce plank porteus nemesis
- Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.
Post#203
by francois » 30 Apr 2017, 02:00
This is under kde5 (plasma) desktop. New python was what was needed. But also, I have been working with a corrupt changes file.
But now output error for simple scan
Code: Select all
root@porteus:~/Downloads# simple-scan
simple-scan: error while loading shared libraries: libgphoto2.so.6: cannot open shared object file: No such file or directory
root@porteus:~/Downloads#
:
Prendre son temps, profiter de celui qui passe.
francois
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#204
by Blaze » 30 Apr 2017, 09:27
francois, in Porteus current with XFCE DE - all is good
Code: Select all
root@porteus:~# ldd /usr/bin/simple-scan | grep gphoto
libgphoto2.so.6 => /usr/lib64/libgphoto2.so.6 (0x00007f9c1b1db000)
libgphoto2_port.so.12 => /usr/lib64/libgphoto2_port.so.12 (0x00007f9c1afd0000)
root@porteus:~# find /var/log/packages -iname *gphoto*
/var/log/packages/libgphoto2-2.5.13-x86_64-1
root@porteus:~#
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze
-
francois
- Contributor
- Posts: 6435
- Joined: 28 Dec 2010, 14:25
- Distribution: xfce plank porteus nemesis
- Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.
Post#205
by francois » 01 May 2017, 01:48
In kde:
Code: Select all
root@porteus:~# ldd /usr/bin/simple-scan | grep gphoto
libgphoto2.so.6 => not found
libgphoto2_port.so.12 => not found
root@porteus:~#
And installed:
libgphoto2-2.5.10-x86_64-1.txz
So for kde5 missing packages for printing are:
python-2.7.13-x86_64-2_slack14.2.xzm
tcl-8.6.5-x86_64-2.xzm
tk-8.6.5-x86_64-2.xzm
libgphoto2-2.5.10-x86_64-1.xzm
Prendre son temps, profiter de celui qui passe.
francois
-
amplatfus
- Samurai
- Posts: 153
- Joined: 30 Oct 2012, 14:55
- Distribution: MATE Porteus-v5.0rc1
- Location: Romania
Post#206
by amplatfus » 23 Jul 2017, 07:20
sci_fi wrote:Good morning,
Thanks to everyone for the suggestions. Printing is now working for me. I re-installed the latest 07-printing module, re-did the configuration via CUPS and boot in always fresh mode and all is well.
Again thank you for the help. I am now totally transitioned to 3.2.2.
Best regards,
sci_fi
Hi,
Could you please share the printing.xzm? With the one from dl.porteus.org I have error: printer can't create temporary file.
Many thanks!
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm
amplatfus
-
Ed_P
- Contributor
- Posts: 8360
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Post#207
by Ed_P » 23 Jul 2017, 13:13
Ed
Ed_P
-
amplatfus
- Samurai
- Posts: 153
- Joined: 30 Oct 2012, 14:55
- Distribution: MATE Porteus-v5.0rc1
- Location: Romania
Post#208
by amplatfus » 23 Jul 2017, 13:33
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm
amplatfus
-
amplatfus
- Samurai
- Posts: 153
- Joined: 30 Oct 2012, 14:55
- Distribution: MATE Porteus-v5.0rc1
- Location: Romania
Post#209
by amplatfus » 23 Jul 2017, 20:17
Hi,
I can print with version 07-printing-i586-18.01.2017.xzm,
is working, but I have red error at logout:
Code: Select all
No module named PyQt4.OtCore. Unable to load Ot4/Ot5 sussport Is it installed?.
Please do you have it too? I tested with MATE Porteus 3.2.2
Edit: correct version active with this error is
07-printing-x86_64-03.02.2017.xzm The error appears randomly.
Thank you,
amplatfus
Last edited by
amplatfus on 24 Jul 2017, 11:39, edited 1 time in total.
Porteus-v5.0. rc1 MATE. Thank you all dev team and @Blaze for helping to configure it, thanks to entire Porteus community members for great topics.
Kernel: 000-kernel-5.4.8,xzm
amplatfus
-
Blaze
- DEV Team
- Posts: 3884
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
-
Contact:
Post#210
by Blaze » 24 Jul 2017, 08:10
amplatfus, it's strange and 18.01.2017 is not stable.
Look at this post
Re: Printing and scanning for Porteus 4.0 (Пост Blaze #55162)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Blaze