@fanthom that fixes the issue with Slackware current. Will apply it to Alpha 1.0 and report back with an edit.
NOTE:
KDE segfaults
and only xfce works here
/*
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.37 Slackware Linux Project
Current Operating System: Linux GHS-E213-2 2.6.35.11 #2 SMP Tue Feb 8 00:10:05 CST 2011 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0 3
Build Date: 08 February 2011 08:45:11PM
Current version of pixman: 0.20.2
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 28 16:49:17 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
resize called 1680 1050
xset: bad font path element (#10), possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
kbuildsycoca4 running...
Fetched layout groups from X server: layouts: ("us") variants: ("")
Fetched layout groups from X server: layouts: ("us") variants: ("")
QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
kded(2141)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kwin(2179) KWin::CompositingPrefs::detectDriverAndVersion: GL vendor is "Mesa Project"
kwin(2179) KWin::CompositingPrefs::detectDriverAndVersion: GL renderer is "Software Rasterizer"
kwin(2179) KWin::CompositingPrefs::detectDriverAndVersion: GL version is "1.4 (2.1 Mesa 7.9.2-devel)"
kwin(2179) KWin::CompositingPrefs::detectDriverAndVersion: Detected driver "software" , version "7.9.2.-devel)"
kwin(2179): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(2179): ""restore2" - conversion of "0,0,0,0" to QRect failed"
kwin(2179): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
kwin(2179): glCheckFramebufferStatus failed: "GL_NO_ERROR"
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0268]
1: /usr/bin/X (0x400000+0x60fc9) [0x460fc9]
2: /lib64/libc.so.6 (0x7fc6cf760000+0x340b0) [0x7fc6cf7940b0]
3: /lib64/libc.so.6 (0x7fc6cf760000+0x8b04b) [0x7fc6cf7eb04b]
4: /usr/lib64/xorg/modules/libfb.so (fbBlt+0xf8) [0x7fc6cda002b8]
5: /usr/lib64/xorg/modules/libfb.so (fbBltStip+0x40) [0x7fc6cda01040]
6: /usr/lib64/xorg/modules/libfb.so (fbGetImage+0x206) [0x7fc6cda067a6]
7: /usr/bin/X (0x400000+0x154dd8) [0x554dd8]
8: /usr/lib64/xorg/modules/extensions/libglx.so (0x7fc6ceca3000+0x38e3a) [0x7fc6cecdbe3a]
9: /usr/lib64/xorg/modules/dri/swrast_dri.so (0x7fc6cca1d000+0x2906b) [0x7fc6cca4606b]
10: /usr/lib64/xorg/modules/extensions/libglx.so (0x7fc6ceca3000+0x38dd8) [0x7fc6cecdbdd8]
11: /usr/lib64/xorg/modules/extensions/libglx.so (0x7fc6ceca3000+0x359fe) [0x7fc6cecd89fe]
12: /usr/lib64/xorg/modules/extensions/libglx.so (0x7fc6ceca3000+0x36842) [0x7fc6cecd9842]
13: /usr/lib64/xorg/modules/extensions/libglx.so (0x7fc6ceca3000+0x38453) [0x7fc6cecdb453]
14: /usr/bin/X (0x400000+0x2def1) [0x42def1]
15: /usr/bin/X (0x400000+0x21ffe) [0x421ffe]
16: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7fc6cf77ee5d]
17: /usr/bin/X (0x400000+0x21bb9) [0x421bb9]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at
http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
Unexpected response from KInit (response = 0).
startkde: Could not start ksmserver. Check your installation.
QProcess: Destroyed while process is still running.
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
xinit: connection to X server lost
kglobalaccel: Fatal IO error: client killed
kded4: Fatal IO error: client killed
olivares@GHS-E213-2:~$ Qt-subapplication: Fatal IO error: client killed
Error: Can't open display: :0
GOT SIGHUP
Could not connect to D-Bus server: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-fTOaF722EC: Connection refused
startkde: Shutting down...
kdeinit4_wrapper: Warning: connect(/home/olivares/.kde/socket-GHS-E213-2/kdeinit4__0) failed: : No such file or directory
Error: Can not contact kdeinit4!
startkde: Running shutdown scripts...
xprop: unable to open display ':0'
xprop: unable to open display ':0'
startkde: Done.
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
/******
Working in xfce starting up
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.37 Slackware Linux Project
Current Operating System: Linux GHS-E213-2 2.6.35.11 #2 SMP Tue Feb 8 00:10:05 CST 2011 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0 3
Build Date: 08 February 2011 08:45:11PM
Current version of pixman: 0.20.2
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 28 16:50:47 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
resize called 1680 1050
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 2860
xfdesktop[2891]: starting up
HP Linux Imaging and Printing System (ver. 3.11.1)
System Tray Status Service ver. 2.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
*******/
*/
Posted after 16 minutes 59 seconds:
@fanthom & all
The nouveau-kms.conf hack in /etc/modprobe.d/ fixes the issue
Thanks.
bash-4.1# lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
root@porteus:~# cat /mnt/sda2/etc/modprobe.d/nouveau-kms.conf
options nouveau noaccel=1
root@porteus:~# cat /mnt/sda2/etc/modprobe.d/nouveau-kms.conf > /etc/modprobe.d/
/nouveau-kms.conf
root@porteus:~# cat /etc/modprobe.d/nouveau-kms.conf
options nouveau noaccel=1
root@porteus:~# xconf
Trying to autoconfigure Xwindow system, please wait...
creating /etc/X11/xorg.conf...
all done. Run startx now.
If you get black screen or Out-Of-Sync, hit Ctrl+Alt+NumPlus few times
root@porteus:~# startx
xauth: file /root/.serverauth.2801 does not exist
xauth: file /root/.Xauthority does not exist
xauth: file /root/.Xauthority does not exist
X.Org X Server 1.9.3
Release Date: 2010-12-13
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux porteus 2.6.38-rc4-porteus #3 SMP PREEMPT Wed Fe
b 9 17:47:19 Local time zone must be set--s x86_64
Kernel command line: root=/dev/ram0 ramdisk_size=6666 rw initrd=/boot/initrd.xz
BOOT_IMAGE=/boot/vmlinuz
Build Date: 31 January 2011 07:25:48PM
Current version of pixman: 0.20.2
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 28 17:03:56 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NOUVEAU(0): Error creating GPU channel: -19
(EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
resize called 1680 1050
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QS
tring,QString,QString)
kbuildsycoca4 running...
/* removed no need, eveything is working.. */
Should you need further information, please let me know. On my slackware-x86_64 current intallation KDE segfaults, but XFCE works fine. Now with the nouveau-kms.conf file everything is fine here on porteus 1.0 x86_64 alpha
bash-4.1# cat /etc/porteus-version
Porteus-v1.0
bash-4.1# uname -r
2.6.38-rc4-porteus
bash-4.1# uname -a
Linux porteus 2.6.38-rc4-porteus #3 SMP PREEMPT Wed Feb 9 17:47:19 Local time zone must be set--s x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ AuthenticAMD GNU/Linux