Feedback and Bug Reports for Porteus v2.1 RC2

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
cchuang
Black ninja
Black ninja
Posts: 42
Joined: 03 Jan 2011, 06:55
Location: Taiwan

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#136 by cchuang » 08 Aug 2013, 12:28

Dear fanthom,

here the output:
1. lspci -knn:

Code: Select all

00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09)
	Subsystem: Apple Computer Inc. Device [106b:00f7]
00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09)
	Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0155] (rev 09)
	Kernel driver in use: pcieport
00:01.2 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0159] (rev 09)
	Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
	Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
	Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4)
	Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
	Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e57] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
	Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Intel Corporation Device [8086:7270]
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0fd5] (rev a1)
	Subsystem: Apple Computer Inc. Device [106b:00f2]
	Kernel driver in use: nouveau
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0e1b] (rev a1)
	Subsystem: Apple Computer Inc. Device [106b:00f2]
	Kernel driver in use: snd_hda_intel
03:00.0 Ethernet controller [0200]: Broadcom Corporation Device [14e4:16a3] (rev 10)
	Subsystem: Broadcom Corporation Device [14e4:16b4]
03:00.1 SD Host controller [0805]: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader [14e4:16bc] (rev 10)
	Subsystem: Broadcom Corporation Device [14e4:96bc]
	Kernel driver in use: sdhci-pci
04:00.0 Network controller [0280]: Broadcom Corporation BCM4331 802.11a/b/g/n [14e4:4331] (rev 02)
	Subsystem: Apple Computer Inc. Device [106b:00ef]
2. modprobe wl;modprobe b43
3. dmesg:

Code: Select all

[    0.000000] Linux version 3.9.4-porteus (root@porteus) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sat May 25 21:56:02 UTC 2013
[    0.000000] Command line: initrd=initrd.xz vmalloc=512MB load=TeXmacs;Python27;cas login=root BOOT_IMAGE=vmlinuz 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008ad13fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad14000-0x000000008ad52fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ad53000-0x000000008ad68fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad69000-0x000000008ad8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008af8ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008af90000-0x000000008affefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS MBP101.88Z.00EE.B03.1212211437 12/21/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 0A0000000 mask FE0000000 uncachable
[    0.000000]   2 base 090000000 mask FF0000000 uncachable
[    0.000000]   3 base 08C000000 mask FFC000000 uncachable
[    0.000000]   4 base 08B000000 mask FFF000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01743000, 0x01743fff] PGTABLE
[    0.000000] BRK [0x01744000, 0x01744fff] PGTABLE
[    0.000000] BRK [0x01745000, 0x01745fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x26f400000-0x26f5fffff]
[    0.000000]  [mem 0x26f400000-0x26f5fffff] page 2M
[    0.000000] BRK [0x01746000, 0x01746fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x26c000000-0x26f3fffff]
[    0.000000]  [mem 0x26c000000-0x26f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x26bffffff]
[    0.000000]  [mem 0x200000000-0x26bffffff] page 2M
[    0.000000] BRK [0x01747000, 0x01747fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x40005000-0x8ad13fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x8abfffff] page 2M
[    0.000000]  [mem 0x8ac00000-0x8ad13fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8ad53000-0x8ad68fff]
[    0.000000]  [mem 0x8ad53000-0x8ad68fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8ad8f000-0x8af8ffff]
[    0.000000]  [mem 0x8ad8f000-0x8af8ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8afff000-0x8affffff]
[    0.000000]  [mem 0x8afff000-0x8affffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x1ff52000-0x1fffefff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 000000008ad8e1c0 000B4 (v01 APPLE   Apple00 00000000      01000013)
[    0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE   Apple00 00000000 Loki 0000005F)
[    0.000000] ACPI: DSDT 000000008ad82000 04D5C (v01 APPLE  MacBookP 00100001 INTL 20100915)
[    0.000000] ACPI: FACS 000000008ad1e000 00040
[    0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 000000008ad7f000 0053A (v01 APPLE  SataAhci 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad7e000 00024 (v01 APPLE   SmcDppt 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad79000 00D3E (v01 APPLE    UsbPpt 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE     IGHda 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad75000 00032 (v01 APPLE    SsdtS3 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad73000 015EB (v02 APPLE  SsdtIGPU 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad6e000 019AA (v01 APPLE  TbtPEG11 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad6d000 00657 (v01  PmRef  Cpu0Ist 00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad6c000 00B3D (v01  PmRef    CpuPm 00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad6b000 00315 (v01  PmRef  Cpu0Tst 00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 000000008ad6a000 0037A (v01  PmRef    ApTst 00003000 INTL 20100915)
[    0.000000] ACPI: DMAR 000000008ad69000 00088 (v01 APPLE      IVB  00000001 AAPL 00000001)
[    0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x26f5fffff]
[    0.000000]   NODE_DATA [mem 0x26f5f3000-0x26f5f6fff]
[    0.000000]  [ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880266c00000-ffff88026ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x26f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0008dfff]
[    0.000000]   node   0: [mem 0x00090000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x8ad13fff]
[    0.000000]   node   0: [mem 0x8ad53000-0x8ad68fff]
[    0.000000]   node   0: [mem 0x8ad8f000-0x8af8ffff]
[    0.000000]   node   0: [mem 0x8afff000-0x8affffff]
[    0.000000]   node   0: [mem 0x100000000-0x26f5fffff]
[    0.000000] On node 0 totalpages: 2073287
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8821 pages used for memmap
[    0.000000]   DMA32 zone: 564523 pages, LIFO batch:31
[    0.000000]   Normal zone: 23512 pages used for memmap
[    0.000000]   Normal zone: 1504768 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000008e000 - 0000000000090000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
[    0.000000] PM: Registered nosave memory: 00000000000c0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 000000008ad14000 - 000000008ad53000
[    0.000000] PM: Registered nosave memory: 000000008ad69000 - 000000008ad8f000
[    0.000000] PM: Registered nosave memory: 000000008af90000 - 000000008afff000
[    0.000000] PM: Registered nosave memory: 000000008b000000 - 000000008fa00000
[    0.000000] PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[    0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[    0.000000] e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88026f200000 s72768 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s72768 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2040869
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: quiet initrd=initrd.xz vmalloc=512MB load=TeXmacs;Python27;cas login=root BOOT_IMAGE=vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 8086788k/10213376k available (4074k kernel code, 1920228k absent, 206360k reserved, 1960k data, 776k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:4352 nr_irqs:936 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2394.612 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.22 BogoMIPS (lpj=2394612)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000449] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002455] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003344] Mount-cache hash table entries: 256
[    0.003503] CPU: Physical Processor ID: 0
[    0.003504] CPU: Processor Core ID: 0
[    0.003877] mce: CPU supports 9 MCE banks
[    0.003889] CPU0: Thermal monitoring enabled (TM1)
[    0.003900] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.003900] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003900] tlb_flushall_shift: 1
[    0.003997] Freeing SMP alternatives: 12k freed
[    0.004001] ACPI: Core revision 20130117
[    0.009421] ACPI: All ACPI Tables successfully acquired
[    0.009736] dmar: Host address width 36
[    0.009738] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.009743] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.009744] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.009747] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.009749] dmar: RMRR base: 0x0000008b800000 end: 0x0000008f9fffff
[    0.009823] IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
[    0.009824] HPET id 0 under DRHD base 0xfed91000
[    0.009826] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
[    0.009913] Not enable interrupt remapping
[    0.010339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020350] smpboot: CPU0: Intel(R) Core(TM) i7-3635QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.020359] TSC deadline timer enabled
[    0.020370] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.020376] ... version:                3
[    0.020377] ... bit width:              48
[    0.020378] ... generic registers:      4
[    0.020379] ... value mask:             0000ffffffffffff
[    0.020380] ... max period:             000000007fffffff
[    0.020381] ... fixed-purpose events:   3
[    0.020382] ... event mask:             000000070000000f
[    0.026446] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7
[    0.122302] Brought up 8 CPUs
[    0.122306] smpboot: Total of 8 processors activated (38313.79 BogoMIPS)
[    0.128435] devtmpfs: initialized
[    0.128619] PM: Registering ACPI NVS region [mem 0x8ad14000-0x8ad52fff] (258048 bytes)
[    0.128678] NET: Registered protocol family 16
[    0.128975] ACPI: bus type PCI registered
[    0.129093] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[    0.129096] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in E820
[    0.138955] PCI: Using configuration type 1 for base access
[    0.142755] bio: create slab <bio-0> at 0
[    0.142826] ACPI: Added _OSI(Module Device)
[    0.142828] ACPI: Added _OSI(Processor Device)
[    0.142829] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.142830] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144119] ACPI: EC: EC description table is found, configuring boot EC
[    0.148262] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    2.154830] ACPI: SSDT 000000008ad19190 008AD (v01  PmRef  Cpu0Cst 00003001 INTL 20100915)
[    2.155157] ACPI: Dynamic OEM Table Load:
[    2.155159] ACPI: SSDT           (null) 008AD (v01  PmRef  Cpu0Cst 00003001 INTL 20100915)
[    2.158625] ACPI: SSDT 000000008ad1a710 003A4 (v01  PmRef    ApIst 00003000 INTL 20100915)
[    2.158980] ACPI: Dynamic OEM Table Load:
[    2.158982] ACPI: SSDT           (null) 003A4 (v01  PmRef    ApIst 00003000 INTL 20100915)
[    2.162528] ACPI: SSDT 000000008ad18d90 00119 (v01  PmRef    ApCst 00003000 INTL 20100915)
[    2.162853] ACPI: Dynamic OEM Table Load:
[    2.162854] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100915)
[    2.167351] ACPI: Interpreter enabled
[    2.167357] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[    2.167361] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[    2.167372] ACPI: (supports S0 S3 S4 S5)
[    2.167373] ACPI: Using IOAPIC for interrupt routing
[    2.167414] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.177461] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.177854] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
[    2.177889] PCI host bridge to bus 0000:00
[    2.177893] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.177895] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    2.177897] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    2.177899] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    2.177901] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
[    2.177903] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    2.177911] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    2.177989] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    2.178023] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    2.178041] pci 0000:00:01.0: System wakeup disabled by ACPI
[    2.178096] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[    2.178175] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    2.178202] pci 0000:00:01.1: System wakeup disabled by ACPI
[    2.178253] pci 0000:00:01.2: [8086:0159] type 01 class 0x060400
[    2.178332] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    2.178359] pci 0000:00:01.2: System wakeup disabled by ACPI
[    2.178431] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    2.178456] pci 0000:00:14.0: reg 10: [mem 0xc1c00000-0xc1c0ffff 64bit]
[    2.178533] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    2.178566] pci 0000:00:14.0: System wakeup disabled by ACPI
[    2.178619] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    2.178645] pci 0000:00:16.0: reg 10: [mem 0xc1c17100-0xc1c1710f 64bit]
[    2.178724] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.178811] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    2.178834] pci 0000:00:1a.0: reg 10: [mem 0xc1c16c00-0xc1c16fff]
[    2.178926] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    2.178959] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    2.179007] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    2.179023] pci 0000:00:1b.0: reg 10: [mem 0xc1c10000-0xc1c13fff 64bit]
[    2.179097] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.179124] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    2.179174] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    2.179302] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.179341] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    2.179393] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    2.179523] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    2.179565] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    2.179621] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    2.179645] pci 0000:00:1d.0: reg 10: [mem 0xc1c16800-0xc1c16bff]
[    2.179737] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.179768] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    2.179819] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    2.179985] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    2.180005] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    2.180014] pci 0000:00:1f.2: reg 14: [io  0x309c-0x309f]
[    2.180022] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    2.180031] pci 0000:00:1f.2: reg 1c: [io  0x3098-0x309b]
[    2.180039] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    2.180047] pci 0000:00:1f.2: reg 24: [mem 0xc1c16000-0xc1c167ff]
[    2.180093] pci 0000:00:1f.2: PME# supported from D3hot
[    2.180159] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    2.180176] pci 0000:00:1f.3: reg 10: [mem 0xc1c17000-0xc1c170ff 64bit]
[    2.180199] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    2.180329] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
[    2.180340] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc0ffffff]
[    2.180351] pci 0000:01:00.0: reg 14: [mem 0x90000000-0x9fffffff 64bit pref]
[    2.180361] pci 0000:01:00.0: reg 1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    2.180368] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    2.180376] pci 0000:01:00.0: reg 30: [mem 0xc1000000-0xc107ffff pref]
[    2.180429] pci 0000:01:00.0: System wakeup disabled by ACPI
[    2.180483] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    2.180494] pci 0000:01:00.1: reg 10: [mem 0xc1080000-0xc1083fff]
[    3.186002] pci 0000:00:01.0: ASPM: Could not configure common clock
[    3.186113] pci 0000:00:01.0: PCI bridge to [bus 01]
[    3.186116] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    3.186119] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc10fffff]
[    3.186122] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    3.186198] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
[    3.186202] pci 0000:00:01.1:   bridge window [io  0x4000-0x6fff]
[    3.186206] pci 0000:00:01.1:   bridge window [mem 0xc1d00000-0xcdffffff]
[    3.186212] pci 0000:00:01.1:   bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[    3.186287] pci 0000:00:01.2: PCI bridge to [bus 02]
[    3.186293] pci 0000:00:01.2:   bridge window [mem 0xc1b00000-0xc1bfffff]
[    3.186472] pci 0000:03:00.0: [14e4:16a3] type 00 class 0x020000
[    3.186511] pci 0000:03:00.0: reg 10: [mem 0xc1800000-0xc180ffff 64bit pref]
[    3.186541] pci 0000:03:00.0: reg 18: [mem 0xc1810000-0xc181ffff 64bit pref]
[    3.186597] pci 0000:03:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[    3.186706] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    3.186859] pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
[    3.186898] pci 0000:03:00.1: reg 10: [mem 0xc1820000-0xc182ffff 64bit pref]
[    3.187084] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[    3.187127] pci 0000:03:00.1: System wakeup disabled by ACPI
[    3.189182] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    3.189189] pci 0000:00:1c.0:   bridge window [mem 0xc1a00000-0xc1afffff]
[    3.189198] pci 0000:00:1c.0:   bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
[    3.189345] pci 0000:04:00.0: [14e4:4331] type 00 class 0x028000
[    3.189376] pci 0000:04:00.0: reg 10: [mem 0xc1900000-0xc1903fff 64bit]
[    3.189527] pci 0000:04:00.0: supports D1 D2
[    3.189529] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    3.189568] pci 0000:04:00.0: System wakeup disabled by ACPI
[    3.191118] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    3.191127] pci 0000:00:1c.1:   bridge window [mem 0xc1900000-0xc19fffff]
[    3.191208] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    3.191283] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    3.191761] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    3.191807] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    3.191856] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    3.191906] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    3.191955] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    3.192004] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    3.192052] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    3.192107] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    3.193399] ACPI: Enabled 3 GPEs in block 00 to 3F
[    3.193407] acpi root: \_SB_.PCI0 notify handler is installed
[    3.193457] Found 1 acpi root devices
[    3.193479] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    3.193614] ACPI: No dock devices found.
[    3.193709] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    3.193711] vgaarb: loaded
[    3.193712] vgaarb: bridge control possible 0000:01:00.0
[    3.193840] SCSI subsystem initialized
[    3.193843] ACPI: bus type ATA registered
[    3.193898] libata version 3.00 loaded.
[    3.193902] ACPI: bus type USB registered
[    3.193943] usbcore: registered new interface driver usbfs
[    3.193965] usbcore: registered new interface driver hub
[    3.193989] usbcore: registered new device driver usb
[    3.194144] PCI: Using ACPI for IRQ routing
[    3.198695] PCI: pci_cache_line_size set to 64 bytes
[    3.198886] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
[    3.198888] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.198889] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    3.198890] e820: reserve RAM buffer [mem 0x8ad14000-0x8bffffff]
[    3.198892] e820: reserve RAM buffer [mem 0x8ad69000-0x8bffffff]
[    3.198894] e820: reserve RAM buffer [mem 0x8af90000-0x8bffffff]
[    3.198895] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[    3.198896] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[    3.199067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    3.199073] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    3.201112] Switching to clocksource hpet
[    3.201182] pnp: PnP ACPI init
[    3.201189] ACPI: bus type PNP registered
[    3.201273] pnp 00:00: [dma 4]
[    3.201311] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    3.201360] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    3.201482] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[    3.201485] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    3.201539] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    3.201594] system 00:04: [io  0x1000-0x100f] has been reserved
[    3.201596] system 00:04: [io  0x0400-0x047f] has been reserved
[    3.201598] system 00:04: [io  0x0500-0x057f] has been reserved
[    3.201601] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.201644] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.201697] pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
[    3.201777] pnp 00:07: Plug and Play ACPI device, IDs APP000b (active)
[    3.201928] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    3.201931] system 00:08: [mem 0xfed10000-0xfed17fff] could not be reserved
[    3.201933] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    3.201935] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    3.201937] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    3.201939] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    3.201941] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    3.201943] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    3.201945] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    3.201947] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    3.201949] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.203309] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    3.203311] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[    3.203313] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    3.203321] pnp: PnP ACPI: found 10 devices
[    3.203322] ACPI: bus type PNP unregistered
[    3.210326] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[    3.210375] pci 0000:00:01.0: PCI bridge to [bus 01]
[    3.210378] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    3.210381] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc10fffff]
[    3.210384] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    3.210387] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
[    3.210390] pci 0000:00:01.1:   bridge window [io  0x4000-0x6fff]
[    3.210395] pci 0000:00:01.1:   bridge window [mem 0xc1d00000-0xcdffffff]
[    3.210398] pci 0000:00:01.1:   bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[    3.210404] pci 0000:00:01.2: PCI bridge to [bus 02]
[    3.210409] pci 0000:00:01.2:   bridge window [mem 0xc1b00000-0xc1bfffff]
[    3.210419] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1830000-0xc18307ff pref]
[    3.210421] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    3.210430] pci 0000:00:1c.0:   bridge window [mem 0xc1a00000-0xc1afffff]
[    3.210436] pci 0000:00:1c.0:   bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
[    3.210444] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    3.210451] pci 0000:00:1c.1:   bridge window [mem 0xc1900000-0xc19fffff]
[    3.210534] pci 0000:00:01.2: enabling device (0000 -> 0002)
[    3.210628] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    3.210630] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    3.210632] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    3.210633] pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
[    3.210635] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    3.210637] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    3.210639] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
[    3.210640] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    3.210642] pci_bus 0000:05: resource 0 [io  0x4000-0x6fff]
[    3.210644] pci_bus 0000:05: resource 1 [mem 0xc1d00000-0xcdffffff]
[    3.210646] pci_bus 0000:05: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
[    3.210647] pci_bus 0000:02: resource 1 [mem 0xc1b00000-0xc1bfffff]
[    3.210649] pci_bus 0000:03: resource 1 [mem 0xc1a00000-0xc1afffff]
[    3.210651] pci_bus 0000:03: resource 2 [mem 0xc1800000-0xc18fffff 64bit pref]
[    3.210653] pci_bus 0000:04: resource 1 [mem 0xc1900000-0xc19fffff]
[    3.210676] NET: Registered protocol family 2
[    3.210833] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.211006] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.211112] TCP: Hash tables configured (established 65536 bind 65536)
[    3.211127] TCP: reno registered
[    3.211138] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    3.211175] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    3.211233] NET: Registered protocol family 1
[    3.211288] pci 0000:00:14.0: can't derive routing for PCI INT A
[    3.211290] pci 0000:00:14.0: PCI INT A: no GSI
[    3.211356] pci 0000:00:14.0: can't derive routing for PCI INT A
[    3.211758] pci 0000:01:00.0: Boot video device
[    3.211839] PCI: CLS 256 bytes, default 64
[    3.211866] Unpacking initramfs...
[    3.291151] Freeing initrd memory: 692k freed
[    3.291223] dmar: Device scope device [0000:00:02.00] not found
[    3.291225] dmar: Device scope device [0000:00:02.00] not found
[    3.291226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.291229] software IO TLB [mem 0x86d14000-0x8ad14000] (64MB) mapped at [ffff880086d14000-ffff88008ad13fff]
[    3.294448] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.294540] fuse init (API version 7.21)
[    3.294639] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    3.295041] aufs 3.9-20130520
[    3.295045] msgmni has been set to 15795
[    3.295238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.295240] io scheduler noop registered
[    3.295241] io scheduler deadline registered (default)
[    3.295327] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    3.295461] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    3.295609] pcieport 0000:00:01.2: irq 42 for MSI/MSI-X
[    3.295771] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
[    3.295939] pcieport 0000:00:1c.1: irq 44 for MSI/MSI-X
[    3.296097] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    3.296099] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.296100] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    3.296103] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    3.296118] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    3.296121] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    3.296136] pcieport 0000:00:01.2: Signaling PME through PCIe PME interrupt
[    3.296139] pcie_pme 0000:00:01.2:pcie01: service driver pcie_pme loaded
[    3.296164] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    3.296166] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    3.296168] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    3.296176] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    3.296196] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    3.296198] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    3.296205] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    3.296359] intel_idle: MWAIT substates: 0x21120
[    3.296361] intel_idle: v0.4 model 0x3A
[    3.296362] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.297330] loop: module loaded
[    3.297612] ahci 0000:00:1f.2: version 3.0
[    3.297697] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    3.297749] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    3.297753] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    3.297758] ahci 0000:00:1f.2: setting latency timer to 64
[    3.298383] scsi0 : ahci
[    3.298460] scsi1 : ahci
[    3.298534] scsi2 : ahci
[    3.298604] scsi3 : ahci
[    3.298675] scsi4 : ahci
[    3.298736] scsi5 : ahci
[    3.298800] ata1: SATA max UDMA/133 abar m2048@0xc1c16000 port 0xc1c16100 irq 45
[    3.298802] ata2: DUMMY
[    3.298803] ata3: DUMMY
[    3.298804] ata4: DUMMY
[    3.298805] ata5: DUMMY
[    3.298806] ata6: DUMMY
[    3.300327] Fusion MPT base driver 3.04.20
[    3.300328] Copyright (c) 1999-2008 LSI Corporation
[    3.300332] Fusion MPT SPI Host driver 3.04.20
[    3.300359] Fusion MPT SAS Host driver 3.04.20
[    3.300390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.300392] ehci-pci: EHCI PCI platform driver
[    3.300449] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    3.300453] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.300458] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.300471] ehci-pci 0000:00:1a.0: debug port 2
[    3.304370] ehci-pci 0000:00:1a.0: cache line size of 256 is not supported
[    3.304383] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc1c16c00
[    3.310245] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.310382] hub 1-0:1.0: USB hub found
[    3.310386] hub 1-0:1.0: 2 ports detected
[    3.310504] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    3.310508] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.310511] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.310527] ehci-pci 0000:00:1d.0: debug port 2
[    3.314421] ehci-pci 0000:00:1d.0: cache line size of 256 is not supported
[    3.314433] ehci-pci 0000:00:1d.0: irq 22, io mem 0xc1c16800
[    3.320254] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.320379] hub 2-0:1.0: USB hub found
[    3.320383] hub 2-0:1.0: 2 ports detected
[    3.320474] ehci-platform: EHCI generic platform driver
[    3.320495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.320547] uhci_hcd: USB Universal Host Controller Interface driver
[    3.320617] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    3.320619] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    3.320636] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    3.320639] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.320643] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    3.320732] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[    3.320771] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
[    3.320887] xHCI xhci_add_endpoint called for root hub
[    3.320888] xHCI xhci_check_bandwidth called for root hub
[    3.320923] hub 3-0:1.0: USB hub found
[    3.320932] hub 3-0:1.0: 4 ports detected
[    3.321042] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.321045] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    3.321123] xHCI xhci_add_endpoint called for root hub
[    3.321125] xHCI xhci_check_bandwidth called for root hub
[    3.321159] hub 4-0:1.0: USB hub found
[    3.321167] hub 4-0:1.0: 4 ports detected
[    3.329304] Initializing USB Mass Storage driver...
[    3.329343] usbcore: registered new interface driver usb-storage
[    3.329344] USB Mass Storage support registered.
[    3.329366] usbcore: registered new interface driver ums-alauda
[    3.329386] usbcore: registered new interface driver ums-cypress
[    3.329411] usbcore: registered new interface driver ums-datafab
[    3.329435] usbcore: registered new interface driver ums-freecom
[    3.329459] usbcore: registered new interface driver ums-isd200
[    3.329482] usbcore: registered new interface driver ums-jumpshot
[    3.329504] usbcore: registered new interface driver ums-karma
[    3.329524] usbcore: registered new interface driver ums-onetouch
[    3.329550] usbcore: registered new interface driver ums-realtek
[    3.329575] usbcore: registered new interface driver ums-sddr09
[    3.329599] usbcore: registered new interface driver ums-sddr55
[    3.329621] usbcore: registered new interface driver ums-usbat
[    3.329710] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.980824] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.981090] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.981131] ata1.00: ATA-8: APPLE SSD SD256E, 1027AP, max UDMA/133
[    3.981132] ata1.00: 490234752 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.981414] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.981456] ata1.00: configured for UDMA/133
[    3.981518] scsi 0:0:0:0: Direct-Access     ATA      APPLE SSD SD256E 1027 PQ: 0 ANSI: 5
[    3.981650] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[    3.981653] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.981718] sd 0:0:0:0: [sda] Write Protect is off
[    3.981721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.981746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.983376]  sda: sda1 sda2 sda3
[    3.983611] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.080899] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.195462] hub 2-1:1.0: USB hub found
[    4.195551] hub 2-1:1.0: 8 ports detected
[    4.294077] tsc: Refined TSC clocksource calibration: 2394.562 MHz
[    4.294080] Switching to clocksource tsc
[    4.426847] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.427726] i8042: No controller found
[    4.427861] rtc_cmos 00:05: RTC can wake from S4
[    4.427992] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    4.428019] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.428187] cpuidle: using governor ladder
[    4.428378] cpuidle: using governor menu
[    4.428399] sdhci: Secure Digital Host Controller Interface driver
[    4.428400] sdhci: Copyright(c) Pierre Ossman
[    4.428412] sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    4.458220] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA
[    4.458308] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    4.458310] wbsd: Copyright(c) Pierre Ossman
[    4.458379] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    4.458428] usbcore: registered new interface driver vub300
[    4.458447] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.458613] hidraw: raw HID events driver (C) Jiri Kosina
[    4.458654] usbcore: registered new interface driver usbhid
[    4.458655] usbhid: USB HID core driver
[    4.458714] TCP: cubic registered
[    4.458716] NET: Registered protocol family 17
[    4.459113] registered taskstats version 1
[    4.460407] rtc_cmos 00:05: setting system clock to 2013-08-08 12:16:17 UTC (1375964177)
[    4.465250] Freeing unused kernel memory: 776k freed
[    4.465325] BFS CPU scheduler v0.430 by Con Kolivas.
[    4.542923] hub 1-1:1.0: USB hub found
[    4.542972] hub 1-1:1.0: 6 ports detected
[    4.697325] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    4.711572] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    4.711580] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    4.711914] scsi6 : usb-storage 3-2:1.0
[    4.788038] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[    4.866473] hub 2-1.8:1.0: USB hub found
[    4.866691] hub 2-1.8:1.0: 2 ports detected
[    4.940892] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    5.141070] usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci
[    5.228817] hub 2-1.8.1:1.0: USB hub found
[    5.229004] hub 2-1.8.1:1.0: 3 ports detected
[    5.303200] usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci
[    5.493354] usb 2-1.8.1.1: new full-speed USB device number 6 using ehci-pci
[    5.572496] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.1/2-1.8.1.1:1.0/input/input0
[    5.572571] hid-generic 0003:05AC:820A.0003: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
[    5.634449] usb 2-1.8.1.2: new full-speed USB device number 7 using ehci-pci
[    5.714244] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.2/2-1.8.1.2:1.0/input/input1
[    5.714306] hid-generic 0003:05AC:820B.0004: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
[    5.776569] usb 2-1.8.1.3: new full-speed USB device number 8 using ehci-pci
[    6.035588] scsi 6:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 4
[    6.035986] sd 6:0:0:0: [sdb] 61046784 512-byte logical blocks: (31.2 GB/29.1 GiB)
[    6.036404] sd 6:0:0:0: [sdb] Write Protect is off
[    6.036408] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    6.036831] sd 6:0:0:0: [sdb] No Caching mode page present
[    6.036835] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    6.038300] sd 6:0:0:0: [sdb] No Caching mode page present
[    6.038302] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    6.038927]  sdb: sdb1
[    6.040177] sd 6:0:0:0: [sdb] No Caching mode page present
[    6.040180] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    6.040182] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    6.622651] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    8.974408] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[    8.976827] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[    9.550173] udevd[2373]: starting version 182
[   10.026377] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[   10.026417] ACPI: Lid Switch [LID0]
[   10.026491] ACPI: AC Adapter [ADP1] (off-line)
[   10.059943] ACPI: Battery Slot [BAT0] (battery present)
[   10.060023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   10.060030] ACPI: Power Button [PWRB]
[   10.060080] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   10.060084] ACPI: Sleep Button [SLPB]
[   10.060130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   10.060134] ACPI: Power Button [PWRF]
[   10.153650] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[   10.153657] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.159931] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[   10.160022] ACPI: Requesting acpi_cpufreq
[   10.179253] Linux agpgart interface v0.103
[   10.236321] acpi device:02: registered as cooling_device0
[   10.236329] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   10.236373] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[   10.251160] media: Linux media interface: v0.10
[   10.349985] apple_gmux: gmux device not present
[   10.362067] [drm] Initialized drm 1.1.0 20060810
[   10.365652] applesmc: key=493 fan=2 temp=44 index=43 acc=0 lux=2 kbd=1
[   10.369062] mousedev: PS/2 mouse device common for all mice
[   10.402510] input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input7
[   10.402628] usbcore: registered new interface driver bcm5974
[   10.470315] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input8
[   10.470436] apple 0003:05AC:0262.0001: input,hidraw2: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
[   10.472269] apple 0003:05AC:0262.0002: hidraw3: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
[   10.546059] Bluetooth: Core ver 2.16
[   10.546075] NET: Registered protocol family 31
[   10.546078] Bluetooth: HCI device and connection manager initialized
[   10.546084] Bluetooth: HCI socket layer initialized
[   10.546087] Bluetooth: L2CAP socket layer initialized
[   10.546093] Bluetooth: SCO socket layer initialized
[   10.581118] Linux video capture interface: v2.00
[   10.708094] usbcore: registered new interface driver btusb
[   10.749207] usb 2-1.8.1.1: USB disconnect, device number 6
[   10.777313] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   10.819366] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.819661] hda_intel: Disabling MSI
[   10.819670] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.821395] wmi: Mapper loaded
[   10.858696] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
[   10.871609] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
[   10.871781] usbcore: registered new interface driver uvcvideo
[   10.871783] USB Video Class driver (1.1.1)
[   10.908093] usb 2-1.8.1.2: USB disconnect, device number 7
[   11.007865] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.007929] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   11.007983] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.008426] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e7150a2
[   11.008429] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[   11.008431] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[   11.017252] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   11.017267] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.017269] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   11.017308] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.017310] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   11.017312] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.017313] nouveau  [   VBIOS][0000:01:00.0] checking PCIROM for image...
[   11.017400] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   11.017402] nouveau  [   VBIOS][0000:01:00.0] using image from PCIROM
[   11.017552] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   11.017555] nouveau  [   VBIOS][0000:01:00.0] version 80.07.26.04.01
[   11.017728] nouveau E[   VBIOS][0000:01:00.0] 0x86ba[ ]: unknown opcode 0xdb
[   11.017912] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[   11.017914] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   11.017916] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   11.059295] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   11.059319] nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
[   11.059331] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   11.059336] nouveau  [  PTHERM][0000:01:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
[   11.105972] [TTM] Zone  kernel: Available graphics memory: 4044134 kiB
[   11.105975] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   11.105976] [TTM] Initializing pool allocator
[   11.105980] [TTM] Initializing DMA pool allocator
[   11.109720] nouveau  [     DRM] VRAM: 1024 MiB
[   11.109723] nouveau  [     DRM] GART: 512 MiB
[   11.109727] nouveau  [     DRM] TMDS table version 2.0
[   11.109729] nouveau  [     DRM] DCB version 4.0
[   11.109731] nouveau  [     DRM] DCB outp 00: 048101b6 0f230010
[   11.109733] nouveau  [     DRM] DCB outp 01: 018212d6 0f220020
[   11.109735] nouveau  [     DRM] DCB outp 02: 01021212 00020020
[   11.109737] nouveau  [     DRM] DCB outp 03: 088324c6 0f220010
[   11.109738] nouveau  [     DRM] DCB outp 04: 08032402 00020010
[   11.109740] nouveau  [     DRM] DCB outp 05: 02843862 00020010
[   11.109742] nouveau  [     DRM] DCB conn 00: 00020047
[   11.109743] nouveau  [     DRM] DCB conn 01: 02208146
[   11.109745] nouveau  [     DRM] DCB conn 02: 01104246
[   11.109747] nouveau  [     DRM] DCB conn 03: 00410361
[   11.111562] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.111565] [drm] No driver support for vblank timestamp query.
[   11.111567] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   11.111599] nouveau W[     DRM] voltage table 0x5a unknown
[   11.111602] nouveau  [     DRM] 0 available performance level(s)
[   11.111605] nouveau  [     DRM] c:
[   11.121151] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.121154] Bluetooth: BNEP filters: protocol multicast
[   11.121160] Bluetooth: BNEP socket layer initialized
[   11.121905] nouveau  [     DRM] MM: using COPY for buffer copies
[   11.131681] Bluetooth: RFCOMM TTY layer initialized
[   11.131690] Bluetooth: RFCOMM socket layer initialized
[   11.131691] Bluetooth: RFCOMM ver 1.11
[   11.160520] nouveau  [     DRM] allocated 2880x1800 fb: 0x80000, bo ffff8802421ca800
[   11.160572] fbcon: nouveaufb (fb0) is primary device
[   11.621391] Console: switching to colour frame buffer device 360x112
[   11.627789] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   11.627791] nouveau 0000:01:00.0: registered panic notifier
[   11.627793] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[   12.819379] NET: Registered protocol family 10
[   20.215083] ata1.00: configured for UDMA/133
[   20.215086] ata1: EH complete
[   20.215144] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   20.229875] EXT4-fs (sdb1): re-mounted. Opts: commit=600
[   99.891849] lib80211: common routines for IEEE802.11 drivers
[   99.891851] lib80211_crypt: registered algorithm 'NULL'
[   99.963958] wl: module license 'unspecified' taints kernel.
[   99.963960] Disabling lock debugging due to kernel taint
[  170.194674] cfg80211: Calling CRDA to update world regulatory domain
[  170.209011] bcma: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09
[  170.209040] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[  170.209064] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
[  170.209134] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
[  170.261740] bcma: bus0: Bus registered
[  170.274099] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
[  170.274522] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
[  170.275073] Broadcom 43xx driver loaded [ Features: PMNLS ]
[  170.280062] b43-phy0 ERROR: Firmware file "b43/ucode29_mimo.fw" not found
[  170.280068] b43-phy0 ERROR: Firmware file "b43-open/ucode29_mimo.fw" not found
[  170.280072] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#137 by fanthom » 08 Aug 2013, 14:17

@cchuang
please do 2 things:

a) un-blacklist 'b43' driver and blacklist 'wl' as per this HOWTO:
http://forum.porteus.org/viewtopic.php?f=39&t=1099

b) compile b43-fwcutter (takes only couple of seconds) and extract proprietary firmware as per:
http://wireless.kernel.org/en/users/Dri ... 3#firmware

let us know if you managed to do it.
Please add [Solved] to your thread title if the solution was found.

cchuang
Black ninja
Black ninja
Posts: 42
Joined: 03 Jan 2011, 06:55
Location: Taiwan

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#138 by cchuang » 08 Aug 2013, 14:57

[Solved!]

Thanks fanthom. It was solved followed your suggestion. Here, the answer come from the Mac pro.

Thanks!

kadalka
White ninja
White ninja
Posts: 28
Joined: 05 Dec 2012, 18:53
Distribution: Linux Mint
Location: France

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#139 by kadalka » 08 Aug 2013, 18:07

fanthom wrote:@kadalka
Err...

I do not come every day in Porteus forum, however I was wondering:
It seems that you are going to push porteus 2.1 to final ?
How do we know that bugs are corrected ? May be you would create a 2.1.x release ? :lol:
I am astonished that a RC3 will not exist when we all know that MATE needs to be heavily tested... at least.

I suppose that you don't need my rpm2xzm ? :lol: (I would like people to test mine with RC3)

And what about my discuss the other day about firewall ? I do not put SOLVED because it is not solved in my point of view...
My firewall here is based on the original from porteus but I've made many changes so everyone could put whatever they want basically.
(Easy to tweak)
I suppose that you don't need that too... :lol:

Let's see tomorrow how Porteus 2.1 final will be :twisted:
I will make many changes again. few... :lol:

N.B: Of course it's your distro and we all respect that.

PS: I would try to read here this night...
I like Slackware so I tried Porteus...
You don't know everything because you are born to learn ...

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#140 by fanthom » 08 Aug 2013, 21:11

@kadalka
a) no plans for rc3 or 2.1.x - we have also a real life.
b) too late for inclusion in 2.1 but you can post fixes/patches so they may get to next release
c) it's not my distro
Please add [Solved] to your thread title if the solution was found.

neko
DEV Team
DEV Team
Posts: 2109
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#141 by neko » 09 Aug 2013, 01:59

@brokenman
May be next month, I will upload the 'porteus-package-manager' modified for Japanese on the thread "32bit Porteus v2.0 + FVWM(Austrumi like) and minimized" of "Community effort"

But it can not be an Porteus official version directly. It is an mere test sample. You may understand the reason, if you check /linuxrc and /functions included in /boot/syslinux/initrd.xz included in lxde_fvwm_ja1.iso already uploaded on that thread.

The 'linuxrc and functions' were rewritten from original 'linuxrc' in order to translate '/boot/docs/cheatcodes.txt' into Japanese version '/boot/docs/cheatcodes-ja.txt' included in the lxde_fvwm_ja1.iso. The 'linuxrc and functions' are mere test samples.

User avatar
brokenman
Site Admin
Site Admin
Posts: 6105
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v4 all desktops
Location: Brazil

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#142 by brokenman » 09 Aug 2013, 04:45

Ok thanks. I'll see what I can do with it. Good luck in there, the script is a little messy.
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
francois
Contributor
Contributor
Posts: 6434
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#143 by francois » 09 Aug 2013, 13:01

Who is starting the thread for brand and shiny new porteus 2.1? :)
Prendre son temps, profiter de celui qui passe.

User avatar
brokenman
Site Admin
Site Admin
Posts: 6105
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v4 all desktops
Location: Brazil

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#144 by brokenman » 09 Aug 2013, 13:51

If nobody else does it I will create individual DE threads tonight.
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
francois
Contributor
Contributor
Posts: 6434
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#145 by francois » 09 Aug 2013, 14:13

Thanks. :)

Maybe a day of break is not a luxury! :twisted:
Prendre son temps, profiter de celui qui passe.

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#146 by Ahau » 09 Aug 2013, 14:53

@rava -- btw, I added 'gifsicle' so making animated gifs with mtpaint should work for you in 2.1 final.

@donald -- we did a lot of work on how automounting works in 2.1 final. Drives will now be mounted in /mnt instead of /run/media/$USER. I was hoping this change would bear on your issue and make it simpler to resolve it but in the end we're still using udisks2 to implement the mount command, and that sends it back through polkit and the whole chain of events. We were reluctant to remove guest from "plugdev" because we didn't want to create bugs somewhere else with our final release, but I'd like to keep working on this so we can get it right going forward and maybe push an update to resolve this or at least an optional module for those who want to restrict guest from mounting/unmounting.

For now, try the following:
1) remove guest from plugdev per my instructions on page 7 of this thread, like you did previously. This will make it so guest cannot unmount drives mounted by root.
2) edit /usr/share/polkit-1/actions/org.freedesktop.udisks2.policy. For each udisks action that looks relevant, such as mounting/unmounting, change this line:

Code: Select all

<allow_active>auth_admin_keep</allow_active>
to look like this:

Code: Select all

<allow_active>auth_admin</allow_active>
"auth_admin_keep" means that once you enter the root password, the authorization is stored for a while. With this change, guest will have to enter the root password for every action.
3) edit /etc/fstab. For any drive you don't want to appear with an icon in thunar, remove 'comment=x-gvfs-show' from its mount options, and it will dissapear. this one will be a little harder to make persistent because fstab is generated on the fly for every boot even if you save your changes. You'll probably want to disable /etc/rc.d/init.d/show_gvfs, either by running 'chmod -x' on it or modifying the contents of the script to suit your needs. Finally, comment out this line:

Code: Select all

test -e /lib/udev/rules.d/80-udisks2.rules && MOPT="$MOPT,comment=x-gvfs-show$GVICON"
in /sbin/udev-fstab-update. (This only applies to 2.1 final and later). This will prevent your drives from showing up in the thunar pane, for all users. If you like, I can try to help out with a more customized approach to show some but not other drives. I'll admit that this is a pain.
Please take a look at our online documentation, here. Suggestions are welcome!

donald
Full of knowledge
Full of knowledge
Posts: 2064
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#147 by donald » 09 Aug 2013, 21:44

@Ahau

Thanks a lot for this Howto.

I think I will play with these options and see what will come out.
What I've written, in my previous posts, was my ideal vision.
Now I see it a little bit cooler:
It's only important that guest can not mount Partitions,
which are not allowed.(I always have something to Hide)
If guest can unmount Partions, or see an Icon of
Partitions which are not allowed, not as important in practice

Thanks for your work on Porteus.
regards
donald

User avatar
brokenman
Site Admin
Site Admin
Posts: 6105
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v4 all desktops
Location: Brazil

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#148 by brokenman » 09 Aug 2013, 23:14

This is a sticky situation that is relative to the user. It's a tricky balance between a seasoned user that wants to limit things and perhaps has other users on the system, or a complete beginner with no computer knowledge that just wants to plug in there device and copy photos onto it. To be successful I believe a distro has to be both. Out of the box should be set up for the beginner, but still have the flexibility for the advanced user to control all aspects. That's why I love linux.
How do i become super user?
Wear your underpants on the outside and put on a cape.

donald
Full of knowledge
Full of knowledge
Posts: 2064
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#149 by donald » 09 Aug 2013, 23:59

@brokenman

That's definitly right.
and yes, it's more comfortable for a single user at Home.
Can you remember how it was in 2.0-XFCE?
There were no Drive-Icons in the left-panel of Thunar.
and as it should be, (imho) you had to be root to mount unmount HD-Partitions.
(guest could use a usb-stick).

I know why it is different now.

But as humans are, If they can see that there is a secret Partition,
they try and try and try to somehow get access.....
.....till the whole system is damaged.

never mind....I will take precautions 8)

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Feedback and Bug Reports for Porteus v2.1 RC2

Post#150 by Ahau » 12 Aug 2013, 14:40

Here's the sticky wicket -- in Porteus 2.0, the icons weren't there, but the guest user still had the ability to mount or unmount them...it's just that most users wouldn't know how to do it without seeing the icons (udisksctl from the command line). Let us know if you're able to tweak it how you like it and maybe write up a howto, or I can help with a script or something to customize how these are handled.
Please take a look at our online documentation, here. Suggestions are welcome!

Post Reply