Porteus-v1.2-rc1 x86_64 is ready for testing!
- fanthom
- Moderator Team
- Posts: 5622
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Porteus-v1.2-rc1 x86_64 is ready for testing!
First rc of upcoming 64bit Porteus-1.2 is ready. Please give it a shot and report all bugs and suggestion which could improve users experience.
Detailed changelog about the release can be found in this thread:
http://porteus.org/forum/viewtopic.php?f=44&t=1064
Download the ISO from here:
http://ponce.cc/porteus/x86_64/testing/Porteus-v1.2-rc1
ISO is slightly larger mainly due to upgraded 'qt' package to version 4.8.0 .
Just today i have decided to include broadcom-sta by default. All other broadcom drivers (b43, b43-legacy, bcma) are blacklisted by default. Let's hope this release gonna solve never-ending broadcom wifi failure saga.
'vga-detect' cheatcode is much improved in this release so please test it extensively. I have added "xorg guard" process which unloads proprietary GPU drivers in case when xorg doesn't start properly so you should always get into desktop despite of drivers being used.
@beny
Please prepare 3 nVidia drivers for this release:
- current
- 173.14.x
- 96.43.x
and i'll drop them to the repo when ready.
Have fun and dont hesitate to post in this thread.
Detailed changelog about the release can be found in this thread:
http://porteus.org/forum/viewtopic.php?f=44&t=1064
Download the ISO from here:
http://ponce.cc/porteus/x86_64/testing/Porteus-v1.2-rc1
ISO is slightly larger mainly due to upgraded 'qt' package to version 4.8.0 .
Just today i have decided to include broadcom-sta by default. All other broadcom drivers (b43, b43-legacy, bcma) are blacklisted by default. Let's hope this release gonna solve never-ending broadcom wifi failure saga.
'vga-detect' cheatcode is much improved in this release so please test it extensively. I have added "xorg guard" process which unloads proprietary GPU drivers in case when xorg doesn't start properly so you should always get into desktop despite of drivers being used.
@beny
Please prepare 3 nVidia drivers for this release:
- current
- 173.14.x
- 96.43.x
and i'll drop them to the repo when ready.
Have fun and dont hesitate to post in this thread.
Last edited by brokenman on 20 Feb 2012, 19:22, edited 1 time in total.
Reason: Stuck it
Reason: Stuck it
Please add [Solved] to your thread title if the solution was found.
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Hi to all avid porteus programmers testers users alike
Beautiful, fast, responsive distro, the fastest on my laptop (techs: dual core @ p7450) to date. Copied,pre hand, a couple of files to porteus/base and sent the thing for a spin. This ROCKS 8)
LO_fast, krusader_fast, sound_very good, FF_ver.10-excellent -> kernel 3.2.6 8) giving the last boost out my system.
I as a user must bow down and must add for a RC1,WOW. What is still to come when Porteus-v1.2 finally is out?
Keep up this passion, and a
from me ...
Beautiful, fast, responsive distro, the fastest on my laptop (techs: dual core @ p7450) to date. Copied,pre hand, a couple of files to porteus/base and sent the thing for a spin. This ROCKS 8)
LO_fast, krusader_fast, sound_very good, FF_ver.10-excellent -> kernel 3.2.6 8) giving the last boost out my system.
I as a user must bow down and must add for a RC1,WOW. What is still to come when Porteus-v1.2 finally is out?
Keep up this passion, and a

wicd failed in Porteus 1.2rc
Hi,
Just test porteus-1.2rc1 and wicd does not work. This error message after execute "wicd" in shell is as follows:
File "/usr/share/wicd/daemon/wicd-daemon.py", line 60, in <module>
from wicd.misc import noneToBlankString, _status_dict
ImportError: cannot import name _static_dict
cch
Just test porteus-1.2rc1 and wicd does not work. This error message after execute "wicd" in shell is as follows:
File "/usr/share/wicd/daemon/wicd-daemon.py", line 60, in <module>
from wicd.misc import noneToBlankString, _status_dict
ImportError: cannot import name _static_dict
cch
- brokenman
- Site Admin
- Posts: 6104
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
- Contact:
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Thanks for the kind words ... what started out as a plaything (64bit porteus) for fanthom, he has turned into a solid usable platform. Kudos!! Keep up the great work fanthom!
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
- brokenman
- Site Admin
- Posts: 6104
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
- Contact:
Re: wicd failed in Porteus 1.2rc
What is the output of: wicd-gtk
Wicd should already be started in the systray after boot. When you click it, is it populated with wireless networks or not?
Wicd should already be started in the systray after boot. When you click it, is it populated with wireless networks or not?
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
Re: wicd failed in Porteus 1.2rc
Sorry for my mistake.
This error is due to execute wrong python, 2.7.2 version I added, which is auto-loaded while startup and makes system confusing. wicd-gtk uses python-2.6.6 (come with porteus). Sorry.
Porteus-1.2rc was tested on my MacBook air 13 (i7 version); i915 and wifi work WELL now but the touchpad seemingly works a little sensible (at least it works well in 1.1 version), I will keep trying.
Thanks for all of you, Porteus developers!
cch
EDIT:\\
merged with rc1 thread
fanthom
This error is due to execute wrong python, 2.7.2 version I added, which is auto-loaded while startup and makes system confusing. wicd-gtk uses python-2.6.6 (come with porteus). Sorry.
Porteus-1.2rc was tested on my MacBook air 13 (i7 version); i915 and wifi work WELL now but the touchpad seemingly works a little sensible (at least it works well in 1.1 version), I will keep trying.
Thanks for all of you, Porteus developers!
cch
EDIT:\\
merged with rc1 thread
fanthom
- Tonio
- Contributor
- Posts: 276
- Joined: 28 Dec 2010, 16:37
- Distribution: Slackware,porteus,FreeBSD,Slax
- Location: 127.0.0.1
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Got this new version. Now I do get IP adress and working connection on bootup. This did not happen with the official Porteus v1.1 and rc candidates. Great Job guys 
have not tested xfce version, but will consider it later. Sorry for being quiet. I have been busy at work

have not tested xfce version, but will consider it later. Sorry for being quiet. I have been busy at work

Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Currently booting and it doesn't appear something is broken. So, everything is perfect !
We should begin to works to get a boot under 10 seconds 8)
We should begin to works to get a boot under 10 seconds 8)
NjVFQzY2Rg==
- Rava
- Contributor
- Posts: 4910
- Joined: 11 Jan 2011, 02:46
- Distribution: XFCE 5.0 x86_64 + 4.0 i586
- Location: Forests of Germany
Porteus-XFCE-v1.2-rc1 and cdrecord bug
Unable to write a CDROM with an internal BD/DVD/CD writer of an Asus notebook:
I tried to find a solution in other forums but so far to no prevail.
Code: Select all
root@porteus:/mnt/DL# l /dev/dvdwriter
lrwxrwxrwx 1 root 3 2012-03-20 23:44 /dev/dvdwriter -> sr0
root@porteus:/mnt/DL# l /dev/cdwriter
lrwxrwxrwx 1 root 3 2012-03-20 23:44 /dev/cdwriter -> sr0
root@porteus:/mnt/DL# l /dev/sr0
brw-rw---- 1 root 11, 0 2012-03-20 23:44 /dev/sr0
root@porteus:/media/Elements/backup# cdrecord --scanbus|grep -- 0,0
Linux sg driver version: 3.5.34
0,0,0 0) 'ATA ' 'WDC WD6400BEVT-2' '01.0' Disk
1,0,0 100) 'ATA ' 'WDC WD3200BEVT-2' '11.0' Disk
5,0,0 500) 'Optiarc ' 'BD ROM BC-5500H ' '1.B0' Removable CD-ROM
8,0,0 800) 'USB ' 'Flash Disk ' '2040' Removable Disk
12,0,0 1200) ' ' 'USB DISK Pro ' 'PMAP' Removable Disk
13,0,0 1300) 'Lexar ' 'USB Flash Drive ' '1100' Removable Disk
14,0,0 1400) 'WD ' 'Elements 1023 ' '2005' Disk
root@porteus:/mnt/DL# cdrecord speed=10 dev=5,0,0 gracetime=20 -tao -v KNOPPIX_V6.7.1CD-2011-09-14-DE.iso
Cdrecord-ProDVD-ProBD-Clone 3.01a02 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Joerg Schilling
TOC Type: 1 = CD-ROM
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identifikation : 'BD ROM BC-5500H '
Revision : '1.B0'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
cdrecord: Cannot load media with this drive!
cdrecord: Try to load media by hand.
Current: none
Profile: BD-ROM
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 699 MB
Total size: 803 MB (79:37.62) = 358322 sectors
Lout start: 804 MB (79:39/47) = 358322 sectors
cdrecord: Cannot load media with this drive!
cdrecord: Try to load media by hand.
cdrecord: Cannot load media.
Cheers!
Yours Rava
Yours Rava
- Ahau
- King of Docs
- Posts: 1331
- Joined: 28 Dec 2010, 15:18
- Distribution: LXDE & Xfce 32/64-bit
- Location: USA
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Merged with standard edition 1.2 RC1 thread as this is an issue apparently with hardware or cdrecord (maintained in 001 module, not xfce). Rava, does this error occur when you use the standard edition and/or other linuxes with this laptop? Does it occur when you use different software, such as k3b or pburn? Is it repeatable on other hardware, or specific to this one machine?
Thanks!
Thanks!
Please take a look at our online documentation, here. Suggestions are welcome!
- Rava
- Contributor
- Posts: 4910
- Joined: 11 Jan 2011, 02:46
- Distribution: XFCE 5.0 x86_64 + 4.0 i586
- Location: Forests of Germany
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
I forgot to add: when I put in an blank CDROM nothing happened in XFCe.Ahau wrote:Merged with standard edition 1.2 RC1 thread as this is an issue apparently with hardware or cdrecord (maintained in 001 module, not xfce). Rava, does this error occur when you use the standard edition and/or other linuxes with this laptop? Does it occur when you use different software, such as k3b or pburn? Is it repeatable on other hardware, or specific to this one machine?
When I started the very same Porteus from the USB stick on another machine all worked well...
But sorry, I don't have that laptop anymore, since it's not mine and I just borrowed it to check out Porteus and x86-64 Linux on it fror the friend who owns it...
When I get the chance I check that issue out later. Maybe he installs besides Windoze 7 also Linux Mint... which I am not so fond of. I used to have it for a while but it was super bloated.
Cheers!
Yours Rava
Yours Rava
- Ahau
- King of Docs
- Posts: 1331
- Joined: 28 Dec 2010, 15:18
- Distribution: LXDE & Xfce 32/64-bit
- Location: USA
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Ok, thanks. If it's not happening on other computers, then it's probably a hardware-specific issue, like conflicting or absent drivers.
Please take a look at our online documentation, here. Suggestions are welcome!
- Rava
- Contributor
- Posts: 4910
- Joined: 11 Jan 2011, 02:46
- Distribution: XFCE 5.0 x86_64 + 4.0 i586
- Location: Forests of Germany
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
Or faulty hardware.Ahau wrote:Ok, thanks. If it's not happening on other computers, then it's probably a hardware-specific issue, like conflicting or absent drivers.

When I get the change I try it again with some other Linux... like Knoppix... or Puppy... and give you the heads up. Since conflicting or absent drivers would have been an Porteus issue to be solved


Cheers!
Yours Rava
Yours Rava
- fanthom
- Moderator Team
- Posts: 5622
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
@all
here is a kernel update (linux-3.3.1) for rc1 of Portues-1.2
this kernel is based on experimental config which i would like to use in rc2 so please test it when you have a chance.
vmlinuz is slightly larger as i have compiled drivers for Multi Media Cards and Memory Sticks into it (as per luc0zade bug report).
ndiswrapper module is absent as it did not compile against 3.3.x kernel.
have fun:
http://ponce.cc/porteus/x86_64/testing/ ... ftm.tar.gz
here is a kernel update (linux-3.3.1) for rc1 of Portues-1.2
this kernel is based on experimental config which i would like to use in rc2 so please test it when you have a chance.
vmlinuz is slightly larger as i have compiled drivers for Multi Media Cards and Memory Sticks into it (as per luc0zade bug report).
ndiswrapper module is absent as it did not compile against 3.3.x kernel.
have fun:
http://ponce.cc/porteus/x86_64/testing/ ... ftm.tar.gz
Please add [Solved] to your thread title if the solution was found.
Re: Porteus-v1.2-rc1 x86_64 is ready for testing!
@fanthom
Thanks so much for working on a solution to the SD card / MMC drive session changes save file bug.
@all
I'll really like to test this kernel update but as I'm not a Linux developer I'm having difficulty finding out how to turn the files inside the tarball into a bootable iso.
Is there a HOWTO help guide for this process online somewhere?
Thanks so much for working on a solution to the SD card / MMC drive session changes save file bug.
@all
I'll really like to test this kernel update but as I'm not a Linux developer I'm having difficulty finding out how to turn the files inside the tarball into a bootable iso.
Is there a HOWTO help guide for this process online somewhere?