Page 1 of 2
nvidia-304.137-x86_64
Posted: 30 Sep 2017, 23:20
by donald
If you own the appropriate nvidia card/onboard chip, this one is for you.
-- check the list (supported products) --
http://www.nvidia.com/Download/driverRe ... 3709/en-us
(this list seems not to be 100% accurate because the mentioned
gtx 560 ti needs a 340.xx driver)
This driver update did not need to be patched to work.
nvidia-304.137-x86_64-don.xzm
http://filehorst.de/d/cHroxcwG
The File is on a german hosting service so please do as follows to get it.
Wait 15 sec > click "Jetzt zur Download-Seite" (means go to download page) >
click "Klicke hier, um ihn zu starten" (means click to start the download).
I had it running in porteus 3.2.2 (kernel 4.9) - XFCE,KDE and LXDE
Please let me know if it doesn't work for you.
nvidia-304.137-x86_64
Posted: 09 Oct 2017, 12:44
by donald
UPDATE
....If your PC has little RAM...
Same driver; built without the 32 Bit libraries.
The help- and man files were not stripped off.
Much smaller module ~ 30MB, the "full" module is ~ 55MB in size.
http://filehorst.de/d/cBlrBoGk
nvidia-304.137-x86_64
Posted: 01 Apr 2018, 15:26
by Rava
donald wrote: ↑09 Oct 2017, 12:44
UPDATE
....If your PC has little RAM...
Same driver; built without the 32 Bit libraries.
The help- and man files were not stripped off.
Much smaller module ~ 30MB, the "full" module is ~ 55MB in size.
http://filehorst.de/d/cBlrBoGk
For which Kernel is this driver compiled for?
I would be happy to have one for 4.0rc5 x86-64. Sadly blaze told me the driver wont compile for newer Linux kernel.
nvidia-304.137-x86_64
Posted: 01 Apr 2018, 18:33
by donald
As I said in the first post.
> I had it running in porteus 3.2.2 (kernel 4.9) - XFCE,KDE and LXDE <
I can compile the 304.137 driver up to kernel 4.14.4 using a patched *.run file.
Unfortunately I have not found any patches for newer kernels until now.
Kernel 4.14.4 is used in these complete isos
--made by brokenman if i'm not mistaken--
http://dl.porteus.org/x86_64/testing/Porteus-v4.0rc1/
maybe the driver will also compile with other 4.14 kernels (not tested)
but definately not with 4.15 kernels without further patching.
nvidia-304.137-x86_64
Posted: 02 Apr 2018, 03:40
by Rava
donald wrote: ↑01 Apr 2018, 18:33
As I said in the first post.
> I had it running in porteus 3.2.2 (kernel 4.9) - XFCE,KDE and LXDE <
Maybe put that at the beginning of the post, and not into the last line. For which kernel a GPU driver is compiled for is the main info, aside from the GPU driver version, IMHO.
donald wrote: ↑01 Apr 2018, 18:33
I can compile the 304.137 driver up to kernel 4.14.4 using a patched *.run file.
Unfortunately I have not found any patches for newer kernels until now.
Where did you get these patches?
donald wrote: ↑01 Apr 2018, 18:33
but definately not with 4.15 kernels without further patching.
That was what blaze also told me. I have not visited the nvidia forums in ages, but there should be a solution for compiling nvidia drivers for the recent Linux kernel. What good would be having GPU driver *.run files for Linux if the recent kernel not gets supported.
nvidia-304.137-x86_64
Posted: 02 Apr 2018, 07:45
by donald
success - patched - compiled - is running...
....but i am too tired at the moment to prepare/upload a module..maybe tomorrow - stay tuned
EDIT
here we go..
-- nvidia-304.137-kernel-4.15.10-x86_64-don.xzm --
( built without the 32 bit libraries )
http://filehorst.de/d/cxbasaqo
..tested only with 4.0rc5 + xfce..
as usual..
The File is on a german hosting service so please do as follows to get it.
Wait 15 sec > click "Jetzt zur Download-Seite" (means go to download page) >
click "Klicke hier, um ihn zu starten" (means click to start the download).
nvidia-304.137-x86_64
Posted: 02 Apr 2018, 21:14
by fulalas
Nice work,
donald! I'll try to build a 340.xx one as well
nvidia-304.137-x86_64
Posted: 03 Apr 2018, 15:24
by Rava
Donald, you rock! Thank you very much!
Is there a better way than GLX-Gears to compare the performance of some of my NVidia systems with and without that driver? What do you folks think of GL Mark 2?
nvidia-304.137-x86_64
Posted: 15 Apr 2018, 14:48
by donald
@ Rava
Before you ask...
Nvidia 304.137
kernel 4.16.2-x86_64
( porteus-4.0-x86_64-20180415.iso )
http://filehorst.de/d/cfFmfifj
as usual..
The File is on a german hosting service so please do as follows to get it.
Wait 15 sec > click "Jetzt zur Download-Seite" (means go to download page) >
click "Klicke hier, um ihn zu starten" (means click to start the download).
nvidia-304.137-x86_64
Posted: 15 Apr 2018, 21:27
by fulalas
Nice job,
donald! I'll try to create a 340.xx soon
Let's hope we won't update Porteus 4 kernel until the final release
nvidia-304.137-x86_64
Posted: 16 Apr 2018, 18:16
by Rava
nvidia-304.137-x86_64
Posted: 21 Apr 2018, 08:04
by fulalas
@donald, I've finally managed to put the 340.xx to fully work!
I'll upload soon.
P.S.: kernel 4.16.2 ready
nvidia-304.137-x86_64
Posted: 21 Apr 2018, 08:34
by donald
Congrats..
I hope we stay at kernel 4.16.2
nvidia-304.137-x86_64
Posted: 21 Apr 2018, 12:02
by fulalas
nvidia-304.137-x86_64
Posted: 28 Apr 2018, 22:01
by Rava
donald wrote: ↑21 Apr 2018, 08:34
Congrats..
I hope we stay at kernel 4.16.2
Sadly finale Version seems to be 4.16.3. I for now only tested the Xfce ISO but I presume the other DEs will all have the same kernel.
Will we get Nvidia drivers for that soon?