mount.exfat /dev/sdc1 /mnt/testKulle wrote: ↑07 Jan 2021, 08:29@Donald
Here the result:bad usage ??Code: Select all
guest@porteus:~$ su Passwort: root@porteus:/home/guest# mkdir /mnt/test root@porteus:/home/guest# mount .exfat /dev/sdc1 /mnt/test mount: bad usage Rufen Sie „mount --help“ auf, um weitere Informationen zu erhalten. root@porteus:/home/guest#
File system exfat is not supported ?
- babam
- Warlord
- Posts: 528
- Joined: 16 Nov 2016, 10:30
- Distribution: Porteus 5.0rc3 Xfce K6.1.1
- Location: Rainy city
File system exfat is not supported ?
Sorry, my English is bad.
File system exfat is not supported ?
That will be the cause!beny wrote: ↑
you have used linux without the exfat-utils i do not think you have done right.
Ventoy created the USB stick sdc:
sdc2 vfat with the folders EFI grub tool ventoy
sdc1 exfat for the ISOs
I now have 2 options:
either
A. I'll create the stick again
or
B. I will reformat sdc1 (fat32 or ext2 or ext4)
I will probably choose B
Which is better in this case, ext2 or ext4?
So far I have always used fat32 for USB sticks
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
File system exfat is not supported ?
Kulle, try this kernel Porteus Kernel Builder (Пост Blaze #80931)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
File system exfat is not supported ?
I put the two modules from beny (exfat-utils...xzm and fuse-exfat...xzm) in the Porteus/modules folder so that they are activated every time it starts.
After restart I then recreated the USB stick.
No success!
sdc1 cannot be mounted.
Reformatting does not work either:
I wait and wait, nothing happens!
I give up!
exfat obviously cannot be used in my Porteus 4.0
After restart I then recreated the USB stick.
No success!
sdc1 cannot be mounted.
Reformatting does not work either:
Code: Select all
root@porteus:/home/guest# mkfs -t ext2 /dev/sdc1
mke2fs 1.44.1 (24-Mar-2018)
I give up!
exfat obviously cannot be used in my Porteus 4.0
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
File system exfat is not supported ?
Porteus 5.0 RC2
Code: Select all
# lsblk -e1,7 -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 931.5G disk
├─sda1 50M ntfs part /mnt/sda1
├─sda2 149.7G ntfs part /mnt/sda2
├─sda3 508M ntfs part /mnt/sda3
└─sda4 781.2G ntfs part /mnt/sda4
sdb 111.8G disk
└─sdb1 111.8G ext2 part /mnt/sdb1
sdc 931.5G disk
├─sdc1 208.9G ext2 part /mnt/sdc1
└─sdc2 722.7G ext4 part
sdd 29.3G disk
└─sdd1 29.3G vfat part /mnt/sdd1
sr0 1024M rom
# blkid /dev/sdd1
/dev/sdd1: LABEL="KERNEL" UUID="983B-80B3" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="1b002d0c-01"
# fdisk -l | grep -C4 sdd1
Тип метки диска: dos
Идентификатор диска: 0x1b002d0c
Устр-во Загрузочный начало Конец Секторы Размер Идентификатор Тип
/dev/sdd1 * 2048 61439999 61437952 29.3G c W95 FAT32 (LBA)
# uname -a
Linux porteus.example.net 5.10.5-porteus #1 SMP Thu Jan 7 13:18:22 UTC 2021 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
File system exfat is not supported ?
hi kulle take a look at this kernel config:
and without the main fs support i think you can't do this task,this is mine when i compile the new one i have to put on Y all.and i love terminal but for the file system task i use gparted i have to see the work on progress.
Code: Select all
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# end of DOS/FAT/EXFAT/NT Filesystems
-
- Full of knowledge
- Posts: 2070
- Joined: 17 Jun 2013, 13:17
- Distribution: Porteus 3.2.2 XFCE 32bit
- Location: Germany
File system exfat is not supported ?
Guys, mounting exfat is no problem if exfat-utils and fuse-exfat are activated.
Proof: ( @ Kulle v4.0 64bit Xfce )
Proof: ( @ Kulle v4.0 64bit Xfce )
Code: Select all
root@porteus:/home/guest# blkid
/dev/sdc1: UUID="B1B6-C7AE" TYPE="exfat" PTTYPE="dos" PARTUUID="000c8179-01"
root@porteus:/home/guest# mkdir /mnt/test
root@porteus:/home/guest# mount.exfat /dev/sdc1 /mnt/test
FUSE exfat 1.3.0
root@porteus:/home/guest# cd /mnt/test
root@porteus:/mnt/test# mkdir bla blub
root@porteus:/mnt/test# ls
bla/ blub/
root@porteus:/mnt/test#
File system exfat is not supported ?
After I had to cancel (see #19 above)
the USB stick is no longer recognized,
not recognized on USB 2.0, not recognized on USB 3.0.
The stick is now unusable? Can this still be repaired?
The exfat filesystem (above #6) was created by Ventoy:
sdc2 vfat with the folders EFI grub tool ventoy
sdc1 exfat for the ISOs
Now I self formatted another stick with exfat via mkfs.
Test:
Thanks Donald.
So the exfat created by Ventoy cannot be mounted??
Has anyone used Vontoy?
the USB stick is no longer recognized,
not recognized on USB 2.0, not recognized on USB 3.0.
The stick is now unusable? Can this still be repaired?
The exfat filesystem (above #6) was created by Ventoy:
sdc2 vfat with the folders EFI grub tool ventoy
sdc1 exfat for the ISOs
Now I self formatted another stick with exfat via mkfs.
Test:
Code: Select all
root@porteus:/home/guest# blkid
/dev/sda1: UUID="1E4C39F74C39C9F3" TYPE="ntfs" PARTUUID="5125f0f7-01"
... ...
/dev/loop16: TYPE="squashfs"
/dev/sdc1: UUID="AB9C-208B" TYPE="exfat" PTTYPE="dos" PARTUUID="00096f55-01"
root@porteus:/home/guest# mkdir /mnt/test
root@porteus:/home/guest# mount.exfat /dev/sdc1 /mnt/test
FUSE exfat 1.3.0
root@porteus:/home/guest# cd /mnt/test
root@porteus:/mnt/test# mkdir eins zwei
root@porteus:/mnt/test# ls
eins/ zwei/
root@porteus:/mnt/test#
So the exfat created by Ventoy cannot be mounted??
Has anyone used Vontoy?
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
File system exfat is not supported ?
Yes. You must to flash controller.
Welcome to Window$.
Download ChipGenius, get info about Flash Drive and searh firmware tool at Google via Controller Vendor, Controller Part-Number, Flash ID code.
In firmware tool try different settings for repiar USB Flash drive.
I have recovered a lot of flash drives.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
-
- Full of knowledge
- Posts: 2070
- Joined: 17 Jun 2013, 13:17
- Distribution: Porteus 3.2.2 XFCE 32bit
- Location: Germany
File system exfat is not supported ?
Is the stick displayed as a device with the blkid command?
Code: Select all
root@porteus:/home/guest# blkid
Last edited by donald on 08 Jan 2021, 10:26, edited 1 time in total.
- Rava
- Contributor
- Posts: 5401
- Joined: 11 Jan 2011, 02:46
- Distribution: XFCE 5.01 x86_64 + 4.0 i586
- Location: Forests of Germany
File system exfat is not supported ?
Since USB thumbdrives have limited write circles, I would use a non-journaling FS, or here: ext2
I hope you can revive the stick by either donald's or blaze's tips above.
Cheers!
Yours Rava
Yours Rava
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
File system exfat is not supported ?
Bad idea, coz
Code: Select all
Use ext4 for ext2 file systems
Code: Select all
# dmesg | grep sdb
EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
File system exfat is not supported ?
f2fs don't boot so you have to make a separate boot directory for....
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
File system exfat is not supported ?
Damn
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
File system exfat is not supported ?
@Donald
The stick is not displayed as a device with the blkid command.
After I connected this defective USB stick, also sdb is no longer displayed.
Also the icon on the desktop has also disappeared.
sdb is the Boot device with Porteus.
The system is still there (I always use copy2ram)
The stick is not displayed as a device with the blkid command.
After I connected this defective USB stick, also sdb is no longer displayed.
Also the icon on the desktop has also disappeared.
sdb is the Boot device with Porteus.
The system is still there (I always use copy2ram)
Code: Select all
root@porteus:/home/guest# blkid
/dev/sda1: UUID="1E4C39F74C39C9F3" TYPE="ntfs" PARTUUID="5125f0f7-01"
/dev/sda2: LABEL="Boot" UUID="A69487A494877619" TYPE="ntfs" PARTUUID="5125f0f7-02"
/dev/sda3: LABEL="Recover" UUID="34223E21223DE88E" TYPE="ntfs" PARTUUID="5125f0f7-03"
/dev/sda4: UUID="DE5A554B5A552197" TYPE="ntfs" PARTUUID="5125f0f7-04"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop14: TYPE="squashfs"
/dev/loop15: TYPE="squashfs"
/dev/loop16: TYPE="squashfs"
root@porteus:/home/guest#