Page 1 of 2

Unrecognized logical partitions by media:/, driving me nuts!

Posted: 27 Mar 2011, 16:24
by XAVIER
Hi guys,

First the site looks great, much better than slax.org's forum.

I seem to be having very similar issues as the OP in this post.
http://ubuntuforums.org/showthread.php?t=99997


I have a external USB hard drive with 3 partitions, only 2 of which are picked up in media:// places .
From what i have read HAL might have something to do with the issue. However the last thing i want to do is revert to a different kernel or start changing major system files.

Within fstab is comments for this partition.

"fdisk -l /dev/sdc*" shows the following

Code: Select all

Disk /dev/sdc: 750.2 GB, 750156374016 bytes
34 heads, 32 sectors/track, 1346644 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa34266cf

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63   366281999   183140968+   c  W95 FAT32 (LBA)
/dev/sdc2       366282000  1465127999   549423000    f  W95 Ext'd (LBA)
/dev/sdc5       366282063   732563999   183140968+   7  HPFS/NTFS
/dev/sdc6       732564063  1465127999   366281968+   7  HPFS/NTFS
So it looks like (from what i can tell) , i have one primary partition and one logical volume with 2 partitions.
This is just a guess. The partition is accessible fine when doing "mkdir /mnt/sdc5" "mount /dev/sdc5 /mnt/sdc5"


This issue has been lingering for some time.
All thoughts are helpful.

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 16:46
by Hamza
The partition is accessible fine when doing "mkdir /mnt/sdc5" "mount /dev/sdc5 /mnt/sdc5"
Why , it does not mount automaticly at boot ?

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 17:25
by XAVIER
no it doesn't seem to.

I tried making modifications to both fstab and mtab without avail

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 17:59
by Hamza
Can you post the result of ssinfo (jayflood's tools) .

We cannot help you without more infos.

Have you read the rules before posting ?

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 18:54
by XAVIER
I'm pretty familiar with the rules Hamza, with over 300+ posts on the slax forums and ive been a developer for quite many years.

Here is the output of dmesg

Code: Select all

abling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.286953] pnp 00:0c: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.286957] pnp 00:0c: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.287044] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.301333] pnp 00:0d: [mem 0x00000000-0x0009efff]
[    0.301336] pnp 00:0d: [mem 0x0009f000-0x0009ffff]
[    0.301339] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    0.301342] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.301345] pnp 00:0d: [mem 0x00100000-0x7f65a7ff]
[    0.301347] pnp 00:0d: [mem 0x7f65a800-0x7f6fffff]
[    0.301350] pnp 00:0d: [mem 0x7f700000-0x7f7fffff]
[    0.301353] pnp 00:0d: [mem 0x7f700000-0x7fefffff]
[    0.301355] pnp 00:0d: [mem 0xffe00000-0xffffffff]
[    0.301358] pnp 00:0d: [mem 0xffa00000-0xffbfffff]
[    0.301361] pnp 00:0d: [mem 0xfec00000-0xfec0ffff]
[    0.301363] pnp 00:0d: [mem 0xfee00000-0xfee0ffff]
[    0.301366] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[    0.301369] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[    0.301371] pnp 00:0d: [mem 0xfeda0000-0xfeda3fff]
[    0.301374] pnp 00:0d: [mem 0xfeda4000-0xfeda4fff]
[    0.301377] pnp 00:0d: [mem 0xfeda5000-0xfeda5fff]
[    0.301379] pnp 00:0d: [mem 0xfeda6000-0xfeda6fff]
[    0.301382] pnp 00:0d: [mem 0xfed18000-0xfed1bfff]
[    0.301385] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[    0.301516] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.301578] pnp: PnP ACPI: found 14 devices
[    0.301580] ACPI: ACPI bus type pnp unregistered
[    0.301584] PnPBIOS: Disabled by ACPI PNP
[    0.301594] system 00:05: [io  0x0c80-0x0caf] has been reserved
[    0.301598] system 00:05: [io  0x0cc0-0x0cff] could not be reserved
[    0.301605] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.301612] system 00:0a: [io  0x0cb0-0x0cbb] has been reserved
[    0.301615] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.301622] system 00:0b: [io  0x0900-0x097f] has been reserved
[    0.301625] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.301631] system 00:0c: [io  0xf400-0xf4fe] has been reserved
[    0.301635] system 00:0c: [io  0x1080-0x10bf] has been reserved
[    0.301638] system 00:0c: [io  0x10c0-0x10df] has been reserved
[    0.301641] system 00:0c: [io  0x0809] has been reserved
[    0.301648] system 00:0d: [mem 0x00000000-0x0009efff] could not be reserved
[    0.301651] system 00:0d: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.301655] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.301658] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.301662] system 00:0d: [mem 0x00100000-0x7f65a7ff] could not be reserved
[    0.301665] system 00:0d: [mem 0x7f65a800-0x7f6fffff] has been reserved
[    0.301668] system 00:0d: [mem 0x7f700000-0x7f7fffff] has been reserved
[    0.301672] system 00:0d: [mem 0x7f700000-0x7fefffff] could not be reserved
[    0.301675] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
[    0.301679] system 00:0d: [mem 0xffa00000-0xffbfffff] has been reserved
[    0.301682] system 00:0d: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.301686] system 00:0d: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.301689] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.301692] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.301696] system 00:0d: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.301699] system 00:0d: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.301702] system 00:0d: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.301706] system 00:0d: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.301709] system 00:0d: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.301712] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.339709] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.339714] pci 0000:00:1c.0: BAR 14: assigned [mem 0x84000000-0x841fffff]
[    0.339719] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
[    0.339724] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
[    0.339729] pci 0000:00:1c.5: BAR 15: assigned [mem 0x84600000-0x847fffff 64bit pref]
[    0.339734] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.339738] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.339742] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.339745] pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.339748] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    0.339753] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.339760] pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff]
[    0.339766] pci 0000:00:1c.0:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
[    0.339775] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[    0.339779] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.339787] pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6cfffff]
[    0.339792] pci 0000:00:1c.1:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
[    0.339801] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.339805] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.339813] pci 0000:00:1c.3:   bridge window [mem 0xf6a00000-0xf6bfffff]
[    0.339818] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.339827] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    0.339831] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.339839] pci 0000:00:1c.5:   bridge window [mem 0xf6900000-0xf69fffff]
[    0.339845] pci 0000:00:1c.5:   bridge window [mem 0x84600000-0x847fffff 64bit pref]
[    0.339855] pci 0000:03:01.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.339860] pci 0000:03:01.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.339863] pci 0000:03:01.0: BAR 0: assigned [mem 0xf6800000-0xf6800fff]
[    0.339870] pci 0000:03:01.0: BAR 0: set to [mem 0xf6800000-0xf6800fff] (PCI address [0xf6800000-0xf6800fff])
[    0.339874] pci 0000:03:01.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.339877] pci 0000:03:01.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.339879] pci 0000:03:01.0: CardBus bridge to [bus 04-07]
[    0.339882] pci 0000:03:01.0:   bridge window [io  0x5000-0x50ff]
[    0.339888] pci 0000:03:01.0:   bridge window [io  0x5400-0x54ff]
[    0.339894] pci 0000:03:01.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.339900] pci 0000:03:01.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.339906] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.339910] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.339918] pci 0000:00:1e.0:   bridge window [mem 0xf6800000-0xf68fffff]
[    0.339923] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.339942] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.339952] pci 0000:00:1c.0: setting latency timer to 64
[    0.339963] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.339969] pci 0000:00:1c.1: setting latency timer to 64
[    0.339979] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.339985] pci 0000:00:1c.3: setting latency timer to 64
[    0.339994] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.340000] pci 0000:00:1c.5: setting latency timer to 64
[    0.340009] pci 0000:00:1e.0: setting latency timer to 64
[    0.340018] pci 0000:03:01.0: enabling device (0000 -> 0003)
[    0.340023] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.340033] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.340035] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.340038] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.340041] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.340044] pci_bus 0000:00: resource 8 [mem 0x80000000-0xf7ffffff]
[    0.340047] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
[    0.340050] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[    0.340052] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[    0.340055] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[    0.340058] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
[    0.340061] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff]
[    0.340064] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff]
[    0.340066] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff]
[    0.340069] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.340072] pci_bus 0000:0b: resource 1 [mem 0x84000000-0x841fffff]
[    0.340075] pci_bus 0000:0b: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[    0.340078] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.340081] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[    0.340084] pci_bus 0000:0c: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
[    0.340086] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.340089] pci_bus 0000:0d: resource 1 [mem 0xf6a00000-0xf6bfffff]
[    0.340092] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.340095] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.340097] pci_bus 0000:09: resource 1 [mem 0xf6900000-0xf69fffff]
[    0.340100] pci_bus 0000:09: resource 2 [mem 0x84600000-0x847fffff 64bit pref]
[    0.340103] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.340106] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf68fffff]
[    0.340109] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.340112] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.340114] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.340117] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.340120] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.340123] pci_bus 0000:03: resource 8 [mem 0x80000000-0xf7ffffff]
[    0.340125] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
[    0.340128] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[    0.340131] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[    0.340134] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[    0.340136] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff]
[    0.340139] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff]
[    0.340142] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff]
[    0.340145] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff]
[    0.340147] pci_bus 0000:04: resource 0 [io  0x5000-0x50ff]
[    0.340150] pci_bus 0000:04: resource 1 [io  0x5400-0x54ff]
[    0.340153] pci_bus 0000:04: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.340156] pci_bus 0000:04: resource 3 [mem 0x88000000-0x8bffffff]
[    0.340178] NET: Registered protocol family 2
[    0.340211] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.340290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.340640] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.340809] TCP: Hash tables configured (established 131072 bind 65536)
[    0.340812] TCP reno registered
[    0.340815] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.340823] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.340884] NET: Registered protocol family 1
[    0.340896] pci 0000:00:02.0: Boot video device
[    0.341092] PCI: CLS 64 bytes, default 64
[    0.341139] Trying to unpack rootfs image as initramfs...
[    0.710787] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.712364] Freeing initrd memory: 1600k freed
[    0.712887] Simple Boot Flag at 0x79 set to 0x1
[    0.713737] highmem bounce pool size: 64 pages
[    0.713743] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.716286] VFS: Disk quotas dquot_6.5.2
[    0.716352] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.717174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.717357] fuse init (API version 7.15)
[    0.717534] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.718043] SGI XFS Quota Management subsystem
[    0.718202] aufs 2.1-standalone.tree-37-rcN-20101220
[    0.718207] msgmni has been set to 1730
[    0.718310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.718314] io scheduler noop registered
[    0.718330] io scheduler cfq registered (default)
[    0.718984] intel_idle: MWAIT substates: 0x22220
[    0.718986] intel_idle: does not run on family 6 model 15
[    0.719054] isapnp: Scanning for PnP cards...
[    1.076063] isapnp: No Plug & Play device found
[    1.107141] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.127976] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.191983] brd: module loaded
[    1.192951] loop: module loaded
[    1.193511] ahci 0000:00:1f.2: version 3.0
[    1.193533] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.193581] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.193659] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.193663] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.193670] ahci 0000:00:1f.2: setting latency timer to 64
[    1.195547] scsi0 : ahci
[    1.195685] scsi1 : ahci
[    1.195800] scsi2 : ahci
[    1.196045] ata1: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 40
[    1.196048] ata2: DUMMY
[    1.196051] ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 40
[    1.196372] ata_piix 0000:00:1f.1: version 2.13
[    1.196382] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.196422] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.196926] scsi3 : ata_piix
[    1.197114] scsi4 : ata_piix
[    1.199180] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    1.199183] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    1.199361] ata5: port disabled. ignoring.
[    1.201367] Fusion MPT base driver 3.04.17
[    1.201369] Copyright (c) 1999-2008 LSI Corporation
[    1.201378] Fusion MPT SPI Host driver 3.04.17
[    1.201414] Fusion MPT FC Host driver 3.04.17
[    1.201453] Fusion MPT SAS Host driver 3.04.17
[    1.201521] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
[    1.201548] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[    1.353379] ata4.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A100, max UDMA/33
[    1.359257] ata4.00: configured for UDMA/33
[    1.501025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.501048] ata3: SATA link down (SStatus 0 SControl 300)
[    1.555662] ata1.00: ATA-8: OCZ-VERTEX2, 1.02, max UDMA/133
[    1.555665] ata1.00: 97696368 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    1.605666] ata1.00: configured for UDMA/133
[    1.605773] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.02 PQ: 0 ANSI: 5
[    1.605980] sd 0:0:0:0: [sda] 97696368 512-byte logical blocks: (50.0 GB/46.5 GiB)
[    1.606055] sd 0:0:0:0: [sda] Write Protect is off
[    1.606059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.606082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.606640]  sda: sda1
[    1.606883] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.610800] scsi 3:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCT10N A100 PQ: 0 ANSI: 5
[    1.622341] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.622344] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.622474] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.745035] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[    1.745040] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[    1.745044] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[    1.745051] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[    1.745055] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[    1.752035] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xf6800000-0xf68fffff]
[    1.752039] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6800000-0xf68fffff: excluding 0xf6800000-0xf680ffff 0xf68f0000-0xf68fffff
[    1.752056] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[    1.752059] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[    1.752616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.752640] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.752654] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.752658] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.752665] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.756033] ehci_hcd 0000:00:1a.7: debug port 1
[    1.759925] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.759941] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    1.769011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.769178] hub 1-0:1.0: USB hub found
[    1.769183] hub 1-0:1.0: 4 ports detected
[    1.769274] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.769285] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.769289] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.769295] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.777036] ehci_hcd 0000:00:1d.7: debug port 1
[    1.780922] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.780937] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    1.790007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.790163] hub 2-0:1.0: USB hub found
[    1.790168] hub 2-0:1.0: 6 ports detected
[    1.790282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.790320] uhci_hcd: USB Universal Host Controller Interface driver
[    1.790353] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.790360] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.790364] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.790370] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.797037] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    1.797210] hub 3-0:1.0: USB hub found
[    1.797215] hub 3-0:1.0: 2 ports detected
[    1.797298] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.797305] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.797309] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.797314] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.805044] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    1.805219] hub 4-0:1.0: USB hub found
[    1.805223] hub 4-0:1.0: 2 ports detected
[    1.805307] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.805314] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.805318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.805323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.813036] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    1.813215] hub 5-0:1.0: USB hub found
[    1.813220] hub 5-0:1.0: 2 ports detected
[    1.813296] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.813303] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.813307] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.813313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.821036] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    1.821208] hub 6-0:1.0: USB hub found
[    1.821213] hub 6-0:1.0: 2 ports detected
[    1.821292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.821299] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.821303] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.821309] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.829035] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    1.829205] hub 7-0:1.0: USB hub found
[    1.829210] hub 7-0:1.0: 2 ports detected
[    1.829385] usbcore: registered new interface driver uas
[    1.829387] Initializing USB Mass Storage driver...
[    1.829443] usbcore: registered new interface driver usb-storage
[    1.829445] USB Mass Storage support registered.
[    1.829478] usbcore: registered new interface driver ums-alauda
[    1.829511] usbcore: registered new interface driver ums-cypress
[    1.829545] usbcore: registered new interface driver ums-datafab
[    1.829578] usbcore: registered new interface driver ums-freecom
[    1.829611] usbcore: registered new interface driver ums-isd200
[    1.829644] usbcore: registered new interface driver ums-jumpshot
[    1.829678] usbcore: registered new interface driver ums-karma
[    1.829712] usbcore: registered new interface driver ums-onetouch
[    1.829747] usbcore: registered new interface driver ums-sddr09
[    1.829781] usbcore: registered new interface driver ums-sddr55
[    1.829815] usbcore: registered new interface driver ums-usbat
[    1.829916] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.833200] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.833206] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.833376] mice: PS/2 mouse device common for all mice
[    1.833543] device-mapper: uevent: version 1.0.3
[    1.833687] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    1.833871] EISA: Probing bus 0 at eisa.0
[    1.833873] EISA: Cannot allocate resource for mainboard
[    1.833876] Cannot allocate resource for EISA slot 1
[    1.833878] Cannot allocate resource for EISA slot 2
[    1.833880] Cannot allocate resource for EISA slot 3
[    1.833882] Cannot allocate resource for EISA slot 4
[    1.833884] Cannot allocate resource for EISA slot 5
[    1.833886] Cannot allocate resource for EISA slot 6
[    1.833888] Cannot allocate resource for EISA slot 7
[    1.833890] Cannot allocate resource for EISA slot 8
[    1.833892] EISA: Detected 0 cards.
[    1.833895] cpuidle: using governor ladder
[    1.833897] cpuidle: using governor menu
[    1.833959] TCP cubic registered
[    1.833962] NET: Registered protocol family 17
[    1.833972] Registering the dns_resolver key type
[    1.834009] Using IPI No-Shortcut mode
[    1.836624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.840945] md: Waiting for all devices to be available before autodetect
[    1.840948] md: If you don't use raid, use raid=noautodetect
[    1.841115] md: Autodetecting RAID arrays.
[    1.841117] md: Scanned 0 and added 0 devices.
[    1.841119] md: autorun ...
[    1.841121] md: ... autorun DONE.
[    1.841144] RAMDISK: lzma image found at block 0
[    2.092029] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.208964] usb 2-1: selecting invalid altsetting 1
[    2.209031] scsi5 : usb-storage 2-1:1.0
[    2.233535] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    2.233555] Freeing unused kernel memory: 460k freed
[    2.660020] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    2.800259] hub 7-1:1.0: USB hub found
[    2.802180] hub 7-1:1.0: 4 ports detected
[    3.079209] usb 7-1.2: new full speed USB device using uhci_hcd and address 3
[    3.211788] scsi 5:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[    3.213526] sd 5:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB)
[    3.214029] sd 5:0:0:0: [sdb] Write Protect is off
[    3.214032] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    3.214035] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.216148] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.430429]  sdb: sdb1 sdb2 sdb3
[    3.432296] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    3.432300] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[   14.635500] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.635687] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   14.635791] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   14.742343] wmi: Mapper loaded
[   14.780553] Linux agpgart interface v0.103
[   14.864665] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xc80-0xcbf 0xcf8-0xcff
[   14.865314] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   14.866222] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   14.869016] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[   14.869103] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   14.869189] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   14.869287] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   14.971423] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   15.039176] ACPI: AC Adapter [AC] (on-line)
[   15.259730] thermal LNXTHERM:00: registered as thermal_zone0
[   15.259734] ACPI: Thermal Zone [THM] (59 C)
[   15.266649] ACPI: acpi_idle registered with cpuidle
[   15.269019] Monitor-Mwait will be used to enter C-1 state
[   15.272019] Monitor-Mwait will be used to enter C-2 state
[   15.273101] Monitor-Mwait will be used to enter C-3 state
[   15.273107] Marking TSC unstable due to TSC halts in idle
[   15.273255] Switching to clocksource hpet
[   15.304261] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
[   15.328801] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   15.330138] firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   15.339896] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[   15.340475] ACPI: Lid Switch [LID]
[   15.340540] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   15.340582] ACPI: Power Button [PBTN]
[   15.340647] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[   15.340686] ACPI: Sleep Button [SBTN]
[   15.367921] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.381076] firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[   15.382830] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   15.564525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.575424] rtc_cmos 00:03: RTC can wake from S4
[   15.578587] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   15.578623] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   15.622273] ACPI: Battery Slot [BAT0] (battery present)
[   15.622309] ACPI: Battery Slot [BAT1] (battery absent)
[   15.633744] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[   15.633857] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[   15.634883] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[   15.640652] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[   15.705631] input: Dell WMI hotkeys as /devices/virtual/input/input5
[   15.737678] cfg80211: Calling CRDA to update world regulatory domain
[   15.802539] [drm] Initialized drm 1.1.0 20060810
[   15.882597] firewire_core: created device fw0: GUID 424fc00009058581, S400
[   15.920140] tg3.c:v3.115 (October 14, 2010)
[   15.920161] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.920172] tg3 0000:09:00.0: setting latency timer to 64
[   15.941104] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:19:b9:78:d6:2a
[   15.941109] tg3 0000:09:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[   15.941113] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   15.941116] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   16.009299] iwl3945: Intel(R) PRO/Wireless 3945ABGN/BGN Network Connection driver for Linux, in-tree:s
[   16.009303] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[   16.009393] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   16.009408] iwl3945 0000:0c:00.0: setting latency timer to 64
[   16.072986] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   16.073066] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   16.073098] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.075179] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   16.075182] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABGN
[   16.075326] iwl3945 0000:0c:00.0: irq 42 for MSI/MSI-X
[   16.196586] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.196796] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.197327] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.197332] i915 0000:00:02.0: setting latency timer to 64
[   16.220900] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   16.253765] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   16.657248] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.657589] [drm] initialized overlay support
[   16.999629] fbcon: inteldrmfb (fb0) is primary device
[   17.023646] Console: switching to colour frame buffer device 160x50
[   17.027628] fb0: inteldrmfb frame buffer device
[   17.027630] drm: registered panic notifier
[   17.029464] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8
[   17.029584] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   17.029604] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   17.029861] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.142501] tg3 0000:09:00.0: irq 44 for MSI/MSI-X
[   19.319982] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[   24.416860] Non-volatile memory driver v1.3
[   24.795724] NET: Registered protocol family 10
[   24.795955] lo: Disabled Privacy Extensions
[   24.796045] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.796086] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.792430] start_kdeinit (3373): /proc/3373/oom_adj is deprecated, please use /proc/3373/oom_score_adj instead.
[  132.589176] wlan0: authenticate with 00:12:0e:78:a4:6f (try 1)
[  132.590848] wlan0: authenticated
[  132.595204] wlan0: associate with 00:12:0e:78:a4:6f (try 1)
[  132.597239] wlan0: RX AssocResp from 00:12:0e:78:a4:6f (capab=0x411 status=0 aid=1)
[  132.597244] wlan0: associated
[  132.598937] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  142.834225] wlan0: no IPv6 routers present
EDIT:

Here is the ssinfo log

Code: Select all

----------------------
Output from ssinfo
----------------------
script by jayflood
.
.

====== USER INFO =====
User is: root
.
===== MACHINE INFO =====
Platform: i686
Kernel: 2.6.37-porteus
Processor: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz
MemTotal:        2064424 kB
MemFree:          995252 kB
Bootparam: root=/dev/ram0 ramdisk_size=6666 rw initrd=/boot/initrd.lz vga=9 splash=silent quiet autoexec=xconf;telinit~4 load=ch BOOT_IMAGE=/boot/vmlinuz 
.
===== SOUND INFO =====
Sound card:  0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf6dfc000 irq 41
Sound driver: Advanced Linux Sound Architecture Driver Version 1.0.23.
.
===== PARTITION INFO =====
Slax is on: /mnt/sdb1
.
Partitions: 
sda
sda1
sdb
sdb1
sdb2
sdb3
sdc
sdc1
sdc2
sdc5
sdc6
.
Mounted: 
/dev/sdb1     vfat    805M  491M  315M  61% /mnt/sdb1
.
===== OPTICAl DRIVE =====
sr0
.
===== USB INFO =====
Removables: Mass
External
Removable status: sd0:0:0:0:[sda]Protect
sd5:0:0:0:[sdb]Protect
sd6:0:0:0:[sdc]Protect
.
lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
Bus 002 Device 003: ID 0c0b:b159 Dura Micro, Inc. (Acomdata) 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
.
===== SCREEN INFO =====
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
.
===== MODULES LOADED =====
ssinfo.lzm
ssinfo.sq4.lzm
.
===== NETWORK INFO =====
eth0      Link encap:Ethernet  HWaddr 00:19:B9:78:D6:2A  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:17 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:400 (400.0 b)  TX bytes:400 (400.0 b)

wlan0     Link encap:Ethernet  HWaddr 00:1B:77:38:4A:E3  
          inet addr:192.168.1.42  Bcast:255.255.255.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:77ff:fe38:4ae3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1333 errors:0 dropped:0 overruns:0 frame:0
          TX packets:979 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1425304 (1.3 Mb)  TX bytes:133822 (130.6 Kb)
.
# Generated by dhcpcd from wlan0
# /etc/resolv.conf.head can replace this line
domain myhome.westell.com
nameserver 192.168.1.1
# /etc/resolv.conf.tail can replace this line
.
===== PCI INFO =====
lspci: 00:00.0 Host bridge: Intel Corporation Mobile PM915/GM915 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM915/GL915 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM915/GL915 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABGN Network Connection (rev 02)
.
.
===== LOGS INFO =====
dmesg | tail 
.
[  167.932447] SysRq : Terminate All Tasks
[  181.662759] wlan0: authenticate with 00:12:0e:78:a4:6f (try 1)
[  181.664620] wlan0: authenticated
[  181.669063] wlan0: associate with 00:12:0e:78:a4:6f (try 1)
[  181.671086] wlan0: RX AssocResp from 00:12:0e:78:a4:6f (capab=0x411 status=0 aid=1)
[  181.671090] wlan0: associated
[  181.672831] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  192.338077] wlan0: no IPv6 routers present
[  268.663923] SQUASHFS error: Can't find a SQUASHFS superblock on loop46
[  268.666546] SQUASHFS error: Can't find a SQUASHFS superblock on loop46
.
.
cat /var/log/messages | tail
.
Mar 28 17:02:23 (none) acpid: client connected from 3358[0:0] 
Mar 28 17:02:23 (none) acpid: 1 client rule loaded 
Mar 28 17:02:33 (none) dhcpcd[2735]: received SIGTERM, stopping
Mar 28 17:02:33 (none) dhcpcd[2735]: eth0: removing interface
Mar 28 17:02:33 (none) dhcpcd[2736]: received SIGTERM, stopping
Mar 28 17:02:33 (none) dhcpcd[2736]: wlan0: removing interface
Mar 28 17:04:25 (none) dhcpcd[4065]: version 5.2.7 starting
Mar 28 17:04:25 (none) dhcpcd[4065]: forked to background, child pid 4078
Mar 28 17:04:25 (none) dhcpcd[4078]: wlan0: waiting for carrier
Mar 28 17:04:30 (none) exiting on signal 15
..

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 19:30
by Ahau
XAVIER,

I have a similar chipset, and was having issues with my usb flash drive automounting at startup. Please check and see if all of your partitions are automounted in /mnt/live/mnt. If so, try the beta for version 1; fanthom resolved a bug for 'lazy' devices, and my usb flash drive is properly mounted in /mnt now.

thanks!

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 19:35
by Hamza
I have a similar chipset, and was having issues with my usb flash drive automounting at startup. Please check and see if all of your partitions are automounted in /mnt/live/mnt. If so, try the beta for version 1; fanthom resolved a bug for 'lazy' devices, and my usb flash drive is properly mounted in /mnt now.
This is with a frugal installation (with syslinux) ?

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 21:04
by fanthom
@XAVIER
welcome on board :)

your partitions looks ok for me. seems that it's a HAL issue indeed. did you try to mount your partitions manually?
what about plugging your drive before booting of Porteus and using 'delay=5' cheatcode?
please show me output of 'blkid' command.

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 27 Mar 2011, 22:11
by Ahau
@Hamza,

No, this was not on a frugal install. It was on a USB flash drive w/syslinux. The drive on which porteus was installed would not show up in /mnt, but it would show up in /mnt/live/mnt. delay=5 cheatcode would allow it to mount automatically at /mnt.

I suppose a quick and dirty fix would be to add 'mkdir /mnt/sdc5; mount /dev/sdc5 /mnt/sdc5' to rc.local and stick it in your rootcopy, but it'd be better to get it resolved in the default system. :D

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 28 Mar 2011, 05:56
by XAVIER
Like i said, im able to manually mount the partition.

The problem is getting it to show up in media places -within ?kde's version of "?nautilus?"?
I should note that this is a external USB HDD 3.5" 7200RPM drive separate from the drive that slax is installed on and the file system is NTFS.
Also, i have had the same problem on my other system as well. So im pretty sure its a original configuration issue and needs to be fixed logistically.

It's driving me nuts because on older versions of slax the partition would show up fine.

ps: i finally get to use this smiley to show my frustration!

:wall: x 1 trillion

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 28 Mar 2011, 08:20
by brokenman
I'd also say to use the delay cheat to make sure there is sufficient time to pick it up. After boot try: partprobe /dev/sdc and see if you get the window popup for it.

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 28 Mar 2011, 08:25
by fanthom
@XAVIER
regarding slax: does this partition appear under /mnt or /media?
if /mnt then mounting is done through udev and not HAL so you may be interested in this solution:
http://forum.porteus.org/viewtopic.php?f=53&t=356

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 28 Mar 2011, 19:17
by XAVIER
@fanthom

well i spent the better part of the morning gathering the files and neatly placing them where they are supposed to go.
Checked and triple checked everything.

No joy. :O: :wall:

So i tried the files from both 6.1 and even 6.0 as well, no luck there either.

I don't get it, there is absolutely nothing wrong with the media. I am able to manually mount the partition and write to it perfectly as well as verify the contents.
Everything comes back 5/5 , it simple just isn't picked up somewhere and sent to the appropriate place to be shown in media:/

I think the kde module for this is kio_media manager or something to that affect.


Let me just run by everyone one last time what fdisk says.

root@porteus:~# fdisk -l /dev/sdc

Disk /dev/sdc: 750.2 GB, 750156374016 bytes
34 heads, 32 sectors/track, 1346644 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa34266cf

Device Boot Start End Blocks Id System
/dev/sdc1 * 63 366281999 183140968+ c W95 FAT32 (LBA)
/dev/sdc2 366282000 1465127999 549423000 f W95 Ext'd (LBA)
/dev/sdc5 366282063 732563999 183140968+ 7 HPFS/NTFS
/dev/sdc6 732564063 1465127999 366281968+ 7 HPFS/NTFS




So as you can see (or how i understand it anyways) , there are 2 primary partitions. And under one of those are 2 logical partitions.

So 3 partitions in total. 2 of these (sdc1 and sdc6) *are* picked up and mounted by kio/hal however sdc5 isn't.

This is the first ntfs partition under the second primary.

I think I do remember at one time or another the partition being displayed in media, i may be wrong.
I should note, ive had similar issues with the flash drive and xfs file systems in the past. But nothing like this.

Posted after 27 minutes 16 seconds:
Re: Unrecognized logical partitions by media:/, driving me nuts!
Should probably also note that with the new files the 2 other partitions do automount at boot.

Also found the following post where people where having the same issues with kio mm, however those files that are referred to in the post dont show up in the porteus file system. (Unless by some chance they are deleted at boot)

http://ubuntuforums.org/archive/index.php/t-229336.html

Posted after 1 hour 27 minutes 54 seconds:
Re: Unrecognized logical partitions by media:/, driving me nuts!
One final and probably the most important thing.


You know what bothers me isn't even the problem so much with kioMM , but more the way that it is handling the practical application.

Which has got me absolutely upset. :shock:


Why do we even need to automount partitions at boot in order for hal to start picking them up? This is what worries me the most.
Especially these days with USB crapware running ramped. It maybe a paranoid agenda but its still a elusive one.


I dont think there is a smiley for this one.

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 28 Mar 2011, 20:59
by fanthom
any chance to get output of 'blkid' command?
when you plug your hd before booting of porteus then linuxrc creates proper entries for the partitions in /etc/fstab.
HAL checks fstab first and if partition is not there then tries to mount device in the /media folder.

workaround:
add static entry to the fstab.
as you know fstab is refreshed after each boot so you would have to add something like:
mkdir /mnt/sda2 && echo "/dev/sda2 /mnt/sda2 ntfs-3g locale=pl_PL.UTF-8 0 0" >> /etc/fstab
to your /etc/rc.d/rc.local, after that HAL should mount it properly when you plug the device into PC.

Re: Unrecognized logical partitions by media:/, driving me n

Posted: 29 Mar 2011, 04:23
by XAVIER
blkid does NOT return the partition info for sdc5 after its mounted.

I tried

mkdir /mnt/sda2 && echo "/dev/sda2 /mnt/sda2 ntfs-3g locale=pl_PL.UTF-8 0 0" >> /etc/fstab

that didn't work so i tried

mkdir /mnt/sda2 && ntfs-3g /dev/sdc5 /mnt/sdc5 && echo "/dev/sdc5 /mnt/sdc5 ntfs-3g locale=pl_PL.UTF-8 0 0" >> /etc/fstab


that didn't work either. only new info is that blkid doesn't display the partition. , I also tried everything with sudo and no joy there either.

:o



edit:

Is there a way to mount the drive BEFORE hal starts ?

edit 2:

heres the output

root@porteus:~# blkid | grep sdc
/dev/sdc6: LABEL="LOCAL II" UUID="F8CCFDB0CCFD6970" TYPE="ntfs"
/dev/sdc1: LABEL="PRIMARY0" UUID="49D6-1C9E" TYPE="vfat"

Posted after 2 hours 52 minutes 37 seconds:
Re: Unrecognized logical partitions by media:/, driving me nuts!
Also not sure, but i think this might be helpful


root@porteus:~# hal-device | grep sdc5
block.device = '/dev/sdc5' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/host7/target7:0:0/7:0:0:0/block/sdc/sdc5' (string)