Page 1 of 1
Black Screen on graphics mode lxde
Posted: 10 Nov 2013, 17:36
by JR44
Everything was working fine until the pc froze when I clicked apply on and catalyst. control center and was forced yo shutdown. Always fresh works so that means there's some sort of corruption on my save.dat which let me to trying the save repair tool on always fresh but that didn't help either. Any help?
Re: Black Screen on graphics mode lxde
Posted: 10 Nov 2013, 19:31
by JR44
oops wrong section. can a admin/mod move it to newbie questions?
Re: Black Screen on graphics mode lxde
Posted: 10 Nov 2013, 20:28
by fanthom
please move amd-catalyst driver to /optional then boot porteus to text mode and run following command:
Code: Select all
rm /mnt/live/memory/changes/etc/X11/xorg.conf
now move catalyst back to /modules and reboot.
if that wont help then you'll have to create new save.dat i'm afraid as i'm not sure what kind of damage catalyst driver made to your system.
Re: Black Screen on graphics mode lxde
Posted: 16 Nov 2013, 15:57
by JR44
Rm cannot remove /mnt/live/memory/changes/etc/X11/xorg.conf: no such file or directory
Re: Black Screen on graphics mode lxde
Posted: 18 Nov 2013, 09:42
by fanthom
i thought there is some custom xorg.conf in your changes which is causing troubles. seems not so you'll have to create new save.dat i'm afraid.
Re: Black Screen on graphics mode lxde
Posted: 19 Nov 2013, 11:42
by micele
Hello,
I've a problem configuring xorg.conf ,
I would like to configure dual desktop extended on 2 hdmi (on same card)
lspci get this output:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
using xrandr command
xrandr --output HDMI1 --auto --output HDMI2 --auto --right-of HDMI1
..is ok
using these xorg.conf not run correctly (duplicate desktop):
Code: Select all
Section "ServerLayout"
Identifier "Layout 1"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "PHILIPS"
ModelName "246V5L"
DisplaySize 531 299
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "PHILIPS"
ModelName "246V5L"
DisplaySize 531 299
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "1280x720"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "Monitor1"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
what is wrong???
Thankyou!
Re: Black Screen on graphics mode lxde
Posted: 19 Nov 2013, 15:08
by fanthom
hi micele,
not sure about the proper xorg.conf syntax byt maybe you could add this xrandr command at the end of /opt/porteus-scripts/xorg/gui-autostart script?
it should work just fine.
Re: Black Screen on graphics mode lxde
Posted: 19 Nov 2013, 16:39
by micele
ok, i try to modify xorg.conf :
Code: Select all
Section "ServerLayout"
Identifier "Layout 1"
Screen 0 "Screen 0"
Screen 1 "Screen 1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "HDMI1"
VendorName "PHILIPS"
ModelName "246V5L"
DisplaySize 531 299
Option "PreferredMode" "1920x1080"
Option "Position" "0 0"
EndSection
Section "Monitor"
Identifier "HDMI2"
VendorName "PHILIPS"
ModelName "246V5L"
DisplaySize 531 299
Option "PreferredMode" "1920x1080"
Option "Position" "1920 0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "Card0"
Monitor "HDMI1"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x720"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Card0"
Monitor "HDMI2"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x720"
EndSubSection
EndSection
Porteus now start extended 2 monitor, now my difficulty is to run 2 instances of firefox, first on left monitor and second on second monitor from script.
I try launch
firefox --display:0.0 and it's start on left monitor, but when i launch
firefox --display:0.1 or
firefox --display:a.b .. ..anything I write as 'a' and 'b' always start on left monitor!!!!
xrandr -q get this output:
Code: Select all
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 25.0 30.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x720 60.0 50.0
1440x576 25.0
1024x768 75.1 60.0
1440x480 30.0
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 72.8 75.0 66.7 60.0 59.9
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 25.0 30.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x720 60.0 50.0
1440x576 25.0
1024x768 75.1 60.0
1440x480 30.0
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 72.8 75.0 66.7 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
...
Thanks
Re: Black Screen on graphics mode lxde
Posted: 19 Nov 2013, 22:37
by tome
You need -no-remote option to start new instance of firefox if you already have current instance.