Page 1 of 1
Porteus 5.0 no sound
Posted: 23 Jul 2023, 21:32
by lakesidepark
Hello I installed the new Poeteus 5 KDE in my computer, all hardwares recognized but no sound.
I checked the /usr/share/alsa/ucm2 and in there have the folder that correspond to my driver chtmax98090 and inside this folder has the files Hifi.conf and chtmax98080.conf
Also I checked the foler /usr/share/alsa/ucm2/codecs and there have all files: EnableSeq.conf, Headphones.conf, HeadsetMic.conf, InternalMic.conf and Speaker.conf.
After seach in Google I go to /usr/share/alsa/pcm/ and dive a cat in default.conf and there is no seted audio driver
But in Configuration -> audio is empty
How can I activate the audio.
Thanks
||Porteus 5.0 no sound
Posted: 24 Jul 2023, 06:14
by Blaze
Hi
lakesidepark.
Can you try to update kernel to
Porteus Kernel Builder (Пост Blaze #94925) and test it.
Not bad if you share this log. Open terminal and run
Code: Select all
dmesg | egrep -i 'sound|fail|error|warn|found|hda|audio|snd|realtek|firmware|ucm|pcm|alsa|codec|chtmax'
Porteus 5.0 no sound
Posted: 25 Jul 2023, 04:14
by Vic
I had the same issue. Tried PorteuX and sound worked. Yay!
Vic
Porteus 5.0 no sound
Posted: 25 Jul 2023, 13:48
by lakesidepark
What is PorteuX?
Porteus 5.0 no sound
Posted: 25 Jul 2023, 13:49
by lakesidepark
Blaze wrote: ↑24 Jul 2023, 06:14
Hi
lakesidepark.
Can you try to update kernel to
Porteus Kernel Builder (Пост Blaze #94925) and test it.
Not bad if you share this log. Open terminal and run
Code: Select all
dmesg | egrep -i 'sound|fail|error|warn|found|hda|audio|snd|realtek|firmware|ucm|pcm|alsa|codec|chtmax'
I will run, and send the output.
Thanks
Porteus 5.0 no sound
Posted: 25 Jul 2023, 14:31
by Vic
PorteuX is a derivative of Porteus.
PorteuX
Vic
Porteus 5.0 no sound
Posted: 02 Aug 2023, 16:32
by lakesidepark
Sorry for the late I was traveling for work
|The output of dmesg
Code: Select all
dmesg | egrep -i 'sound|fail|error|warn|found|audio|snd|realteck|firmware|ucm|pcm|alsa|codec|chtmax'
[ 0.005412] No NUMA configuration found
[ 0.118578] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.124799] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.176431] Advanced Linux Sound Architecture Driver Initialized.
[ 0.190670] pnp: PnP ACPI: found 8 devices
[ 0.253165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[ 0.253363] hub 1-0:1.0: USB hub found
[ 0.253752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[ 0.253907] hub 2-0:1.0: USB hub found
[ 0.258561] i8042: Warning: Keylock active
[ 0.260892] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 35)
[ 0.262030] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 35)
[ 0.262424] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.262461] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[ 0.380382] ALSA device list:
[ 0.380387] No soundcards found.
[ 0.628158] usb 1-3: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ 0.915409] usb 1-4: New USB device found, idVendor=0bda, idProduct=57cf, bcdDevice= 0.03
[ 1.165320] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 8.931793] elan_i2c i2c-ELAN0000:00: supply vcc not found, using dummy regulator
[ 8.966893] elants_i2c i2c-ELAN0001:00: supply vcc33 not found, using dummy regulator
[ 8.966984] elants_i2c i2c-ELAN0001:00: supply vccio not found, using dummy regulator
[ 9.072745] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0007, Sample: 0x000b, IAP: 0x000b
[ 9.685468] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[ 9.685480] intel_sst_acpi 808622A8:00: request fw failed
[ 9.719864] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 9.719871] cfg80211: failed to load regulatory.db
[ 10.006468] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[ 10.006478] iwlwifi 0000:02:00.0: Found debug configuration: 0
[ 10.010632] iwlwifi 0000:02:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[ 10.059994] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffa0356080)
[ 10.757828] intel_rapl_common: Found RAPL domain package
[ 10.757835] intel_rapl_common: Found RAPL domain core
[ 10.824657] input: chtmax98090 Headset Jack as /devices/pci0000:00/808622A8:00/cht-bsw-max98090/sound/card1/input7
[ 11.961600] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.961730] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.961833] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.131386] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 12.152756] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 12.354365] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 12.354371] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 12.354416] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 12.354421] Bluetooth: hci0: failed to open default fw file: intel/ibt-hw-37.8.bseq
[ 12.840442] usb 1-4: Found UVC 1.00 device HD WebCam (0bda:57cf)
[ 24.791268] SSP2-Codec: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 24.791429] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[ 24.791437] intel_sst_acpi 808622A8:00: request fw failed -2
[ 24.791439] intel_sst_acpi 808622A8:00: FW download fail -2
[ 25.813063] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on ssp2-port: -16
[ 25.813076] SSP2-Codec: __soc_pcm_open() failed (-16)
[ 25.813084] Audio Port: ASoC: dpcm_be_dai_startup() failed at SSP2-Codec (-16)
[ 25.813091] Audio Port: dpcm_fe_dai_startup() failed (-16
Porteus 5.0 no sound
Posted: 02 Aug 2023, 16:46
by lakesidepark
Vic wrote: ↑25 Jul 2023, 14:31
PorteuX is a derivative of Porteus.
PorteuX
Vic
I tested PorteuX 0.5 still no sound
Porteus 5.0 no sound
Posted: 02 Aug 2023, 17:47
by beny
hi, if you install inxi from slackware repos and use like this:dmesg is ok but is too generic
bash-5.2# inxi -A
Audio:
Device-1: AMD SBx00 Azalia driver: snd_hda_intel
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel
API: ALSA v: k6.1.42-beny status: kernel-api
Server-1: PulseAudio v: 16.1 status: active
bash-5.2#
Porteus 5.0 no sound
Posted: 02 Aug 2023, 18:41
by Blaze
Porteus 5.0 no sound
Posted: 02 Aug 2023, 20:47
by lakesidepark
How can I do that I'm new in Porteus I came from Arch
Porteus 5.0 no sound
Posted: 02 Aug 2023, 20:50
by lakesidepark
beny wrote: ↑02 Aug 2023, 17:47
hi, if you install inxi from slackware repos and use like this:dmesg is ok but is too generic
bash-5.2# inxi -A
Audio:
Device-1: AMD SBx00 Azalia driver: snd_hda_intel
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel
API: ALSA v: k6.1.42-beny status: kernel-api
Server-1: PulseAudio v: 16.1 status: active
bash-5.2#
This wrong my audio its chtmax98090 not Nvidia
Porteus 5.0 no sound
Posted: 02 Aug 2023, 20:57
by beny
hi, you have to type inxi -A on terminal, the log is mine
Porteus 5.0 no sound
Posted: 02 Aug 2023, 21:42
by Ed_P
lakesidepark wrote: ↑02 Aug 2023, 20:47
How can I do that I'm new in Porteus I came from Arch
Download the deb file, in terminal run the command deb2xzm for the file to create a xzm version, on your Porteus drive add the xzm file to the /porteus/modules folder. When you boot the fix should be activated and sound should work.
lakesidepark wrote: ↑02 Aug 2023, 20:50
This wrong my audio its chtmax98090 not Nvidia
Yes and you're not running the command on
beny's machine. Run the inxi -A command on
your machine and post what it shows.
Porteus 5.0 no sound
Posted: 03 Aug 2023, 07:15
by Blaze
lakesidepark, you can click right mouse button on the deb or rpm package and convert it to xzm (
password for root is toor)
Anyway you can dowload and activate this module
firmware-intel-sound-20210315-noarch.xzm