Porteus 5.0 no sound

[lakesidepark]

Hello I installed the new Poeteus 5 KDE in my computer, all hardwares recognized but no sound.

I checked the /usr/share/alsa/ucm2 and in there have the folder that correspond to my driver chtmax98090 and inside this folder has the files Hifi.conf and chtmax98080.conf

Also I checked the foler /usr/share/alsa/ucm2/codecs and there have all files: EnableSeq.conf, Headphones.conf, HeadsetMic.conf, InternalMic.conf and Speaker.conf.

After seach in Google I go to /usr/share/alsa/pcm/ and dive a cat in default.conf and there is no seted audio driver


But in Configuration -> audio is empty

How can I activate the audio.

Thanks

[Blaze]

Hi lakesidepark.
Can you try to update kernel to Porteus Kernel Builder (Пост Blaze #94925) and test it.

Not bad if you share this log. Open terminal and run

Code: Select all

dmesg | egrep -i 'sound|fail|error|warn|found|hda|audio|snd|realtek|firmware|ucm|pcm|alsa|codec|chtmax'

[Vic]

I had the same issue. Tried PorteuX and sound worked. Yay!

Vic

[lakesidepark]

What is PorteuX?

[lakesidepark]

Hi lakesidepark.
Can you try to update kernel to Porteus Kernel Builder (Пост Blaze #94925) and test it.

Not bad if you share this log. Open terminal and run

Code: Select all

dmesg | egrep -i 'sound|fail|error|warn|found|hda|audio|snd|realtek|firmware|ucm|pcm|alsa|codec|chtmax'

I will run, and send the output.

Thanks

[Vic]

PorteuX is a derivative of Porteus.

PorteuX

Vic

[lakesidepark]

Sorry for the late I was traveling for work

|The output of dmesg

Code: Select all

 dmesg | egrep -i 'sound|fail|error|warn|found|audio|snd|realteck|firmware|ucm|pcm|alsa|codec|chtmax'
[    0.005412] No NUMA configuration found
[    0.118578] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.124799] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.176431] Advanced Linux Sound Architecture Driver Initialized.
[    0.190670] pnp: PnP ACPI: found 8 devices
[    0.253165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    0.253363] hub 1-0:1.0: USB hub found
[    0.253752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    0.253907] hub 2-0:1.0: USB hub found
[    0.258561] i8042: Warning: Keylock active
[    0.260892] sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 35)
[    0.262030] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 35)
[    0.262424] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.262461] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    0.380382] ALSA device list:
[    0.380387]   No soundcards found.
[    0.628158] usb 1-3: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[    0.915409] usb 1-4: New USB device found, idVendor=0bda, idProduct=57cf, bcdDevice= 0.03
[    1.165320] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    8.931793] elan_i2c i2c-ELAN0000:00: supply vcc not found, using dummy regulator
[    8.966893] elants_i2c i2c-ELAN0001:00: supply vcc33 not found, using dummy regulator
[    8.966984] elants_i2c i2c-ELAN0001:00: supply vccio not found, using dummy regulator
[    9.072745] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0007, Sample: 0x000b, IAP: 0x000b
[    9.685468] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[    9.685480] intel_sst_acpi 808622A8:00: request fw failed
[    9.719864] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    9.719871] cfg80211: failed to load regulatory.db
[   10.006468] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[   10.006478] iwlwifi 0000:02:00.0: Found debug configuration: 0
[   10.010632] iwlwifi 0000:02:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[   10.059994] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffa0356080)
[   10.757828] intel_rapl_common: Found RAPL domain package
[   10.757835] intel_rapl_common: Found RAPL domain core
[   10.824657] input: chtmax98090 Headset Jack as /devices/pci0000:00/808622A8:00/cht-bsw-max98090/sound/card1/input7
[   11.961600] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.961730] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.961833] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.131386] thermal thermal_zone7: failed to read out thermal zone (-61)
[   12.152756] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[   12.354365] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[   12.354371] Bluetooth: hci0: failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[   12.354416] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[   12.354421] Bluetooth: hci0: failed to open default fw file: intel/ibt-hw-37.8.bseq
[   12.840442] usb 1-4: Found UVC 1.00 device HD WebCam (0bda:57cf)
[   24.791268]  SSP2-Codec: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[   24.791429] intel_sst_acpi 808622A8:00: Direct firmware load for intel/fw_sst_22a8.bin failed with error -2
[   24.791437] intel_sst_acpi 808622A8:00: request fw failed -2
[   24.791439] intel_sst_acpi 808622A8:00: FW download fail -2
[   25.813063] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on ssp2-port: -16
[   25.813076]  SSP2-Codec: __soc_pcm_open() failed (-16)
[   25.813084]  Audio Port: ASoC: dpcm_be_dai_startup() failed at SSP2-Codec (-16)
[   25.813091]  Audio Port: dpcm_fe_dai_startup() failed (-16

[lakesidepark]

PorteuX is a derivative of Porteus.

PorteuX

Vic

I tested PorteuX 0.5 still no sound

[beny]

hi, if you install inxi from slackware repos and use like this:dmesg is ok but is too generic
bash-5.2# inxi -A
Audio:
Device-1: AMD SBx00 Azalia driver: snd_hda_intel
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel
API: ALSA v: k6.1.42-beny status: kernel-api
Server-1: PulseAudio v: 16.1 status: active
bash-5.2#

[Blaze]

Hi lakesidepark,
download http://ftp.de.debian.org/debian/pool/no ... -3_all.deb convert to xzm and activate module. Test sound again.

More info is here https://packages.debian.org/ru/sid/firmware-intel-sound

[lakesidepark]

How can I do that I'm new in Porteus I came from Arch

[lakesidepark]

hi, if you install inxi from slackware repos and use like this:dmesg is ok but is too generic
bash-5.2# inxi -A
Audio:
Device-1: AMD SBx00 Azalia driver: snd_hda_intel
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel
API: ALSA v: k6.1.42-beny status: kernel-api
Server-1: PulseAudio v: 16.1 status: active
bash-5.2#

This wrong my audio its chtmax98090 not Nvidia

[beny]

hi, you have to type inxi -A on terminal, the log is mine

[Ed_P]

How can I do that I'm new in Porteus I came from Arch

Download the deb file, in terminal run the command deb2xzm for the file to create a xzm version, on your Porteus drive add the xzm file to the /porteus/modules folder. When you boot the fix should be activated and sound should work.

This wrong my audio its chtmax98090 not Nvidia

Yes and you're not running the command on beny's machine. Run the inxi -A command on your machine and post what it shows.

[Blaze]

lakesidepark, you can click right mouse button on the deb or rpm package and convert it to xzm (password for root is toor)
Anyway you can dowload and activate this module firmware-intel-sound-20210315-noarch.xzm