Canon imageCLASS MF3010 VP

Non release banter
User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#16 by Karmi » 28 Nov 2022, 00:21

beny wrote:
27 Nov 2022, 23:09
hi Karmi https://www.mediafire.com/file/g2k5psgg ... 4.xzm/file
i have done the package from a canon rpm try it if work
Hi beny...that link isn't working.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Canon imageCLASS MF3010 VP [SOLVED]

Post#17 by beny » 28 Nov 2022, 00:36


User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#18 by Karmi » 28 Nov 2022, 00:40

Looks like Mediafire isn't working on my end...files are probably OK, but their site isn't opening for me. I'll try them later...thanks!

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#19 by Karmi » 28 Nov 2022, 01:48

beny wrote:
28 Nov 2022, 00:36
https://www.mediafire.com/file/g2k5psgg ... 4.xzm/file seem that work try it
OK...MediaFire cleared back up and got the file. No luck tho in Always Fresh section at all. That looks like the same Linux driver from Canon that I had...tho I never tried it under Always Ready. Thanks tho!

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Canon imageCLASS MF3010 VP [SOLVED]

Post#20 by Blaze » 28 Nov 2022, 05:21

Karmi, do you use system-config-printer for setup printer?
Do you try another driver for MF3010 in system-config-printer?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#21 by Karmi » 28 Nov 2022, 10:24

Blaze wrote:
28 Nov 2022, 05:21
Karmi, do you use system-config-printer for setup printer?
Do you try another driver for MF3010 in system-config-printer?
Not if that is a Porteus file. All I have done w/ any settings is after the printer is added - I then add a couple check-marks that are suggested to add in the Server Print Settings, i.e., Publish shared printers connected to this system & enable debugging.

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Canon imageCLASS MF3010 VP [SOLVED]

Post#22 by beny » 28 Nov 2022, 10:58

hi Karmi but you have run this bin?/mnt/live/memory/images/cnrdrvcups-ufr2-us-5.60-1.03.x86_64.xzm/usr/bin/cnsetuputil2 that make a setup of your primter maybe... if you start the cups daemon the ppd of your printer is in start a setup and i don't know if work or not i have a brother but the window of canon printer setup utilities is on screen ready to enter your data.

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#23 by Karmi » 28 Nov 2022, 11:27

beny wrote:
28 Nov 2022, 10:58
hi Karmi but you have run this bin?/mnt/live/memory/images/cnrdrvcups-ufr2-us-5.60-1.03.x86_64.xzm/usr/bin/cnsetuputil2 that make a setup of your primter maybe...
Hi beny. Blaze just mentioned something about using a system-config-printer, and that is way above my 'Plug & Play' experience wid printers, especially after reading what forum member francois says about it!?! :%) Now something about the bin. :Search:

I appreciate the help, but would never add this printer to my main Porteus 5 Cinnamon drive if it requires much more than 'Plug & Play' of a driver (like it did on Fedora, Mint & Sparky tests), and maybe some simple editing of a cfg file. Don't mind doing tests on the Porteus testing USB tho, but am about to give up on this printer working wid Porteus. I use Porteus as my main working Linux OS, but all my actual printing gets done from the main Win11 Pro machine.

Have done a clean install on the test USB, and will wait to see what Blaze suggests at this point...Thanks!

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Canon imageCLASS MF3010 VP [SOLVED]

Post#24 by Blaze » 28 Nov 2022, 14:24

Karmi, my Canon i-SENSYS LBP6030B is work fine for me
ImageImage
Image

What do you have in /var/log/cups with my latest 07-printing module

Code: Select all

cat /var/log/cups/error_log
cat /var/log/access_log
?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#25 by Karmi » 28 Nov 2022, 15:03

Blaze wrote:
28 Nov 2022, 14:24
What do you have in /var/log/cups with my latest 07-printing module

Code: Select all

access_log
error_log
Only problem I see now is "Rendering completed." Isn't rendering the scanner? This scanner isn't supposed to work wid Linux.

UPDATE: Also, you have more to do than waste your time on this one printer. Your latest module was very close, but maybe the printer/scanner combo is an issue wid it for Linux because of the scanner. I don't really need this printer working on Porteus, so no biggie if it doesn't work.

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Canon imageCLASS MF3010 VP [SOLVED]

Post#26 by Blaze » 28 Nov 2022, 18:18

Can you show content of these logs?
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#27 by Karmi » 28 Nov 2022, 19:06

Blaze wrote:
28 Nov 2022, 18:18
Can you show content of these logs?
OOPS! :oops:

Always Fresh access log:

Code: Select all

localhost - - [28/Nov/2022:13:57:35 +0000] "POST / HTTP/1.1" 200 361 Create-Printer-Subscriptions successful-ok
Always Fresh error log:

Code: Select all

E [28/Nov/2022:13:57:31 +0000] Unknown directive IdleExitTimeout on line 32 of /etc/cups/cupsd.conf.
E [28/Nov/2022:13:57:31 +0000] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
That's from guest Always ready area...the other logs are longer in root area. Will login and send those also.

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#28 by Karmi » 28 Nov 2022, 19:13

Karmi wrote:
28 Nov 2022, 19:06
Blaze wrote:
28 Nov 2022, 18:18
Can you show content of these logs?
OOPS! :oops:

Always Fresh access log:

Code: Select all

localhost - - [28/Nov/2022:13:57:35 +0000] "POST / HTTP/1.1" 200 361 Create-Printer-Subscriptions successful-ok
Always Fresh error log:

Code: Select all

E [28/Nov/2022:13:57:31 +0000] Unknown directive IdleExitTimeout on line 32 of /etc/cups/cupsd.conf.
E [28/Nov/2022:13:57:31 +0000] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
That's from guest Always ready area...the other logs are longer in root area. Will login and send those also.
root access log:

Code: Select all

localhost - - [28/Nov/2022:09:55:21 -0500] "POST / HTTP/1.1" 200 360 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:09:55:48 -0500] "POST / HTTP/1.1" 200 273 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:09:55:55 -0500] "POST / HTTP/1.1" 401 147 CUPS-Get-Devices successful-ok
localhost - root [28/Nov/2022:09:55:55 -0500] "POST / HTTP/1.1" 200 2659 CUPS-Get-Devices -
localhost - root [28/Nov/2022:09:55:56 -0500] "POST / HTTP/1.1" 200 370 CUPS-Get-Devices -
localhost - - [28/Nov/2022:09:56:08 -0500] "POST / HTTP/1.1" 200 2849772 CUPS-Get-PPDs -
localhost - - [28/Nov/2022:09:56:12 -0500] "POST / HTTP/1.1" 200 43408 CUPS-Get-PPD -
localhost - - [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 401 43535 CUPS-Add-Modify-Printer successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 43535 CUPS-Add-Modify-Printer successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 128 Resume-Printer successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 128 CUPS-Accept-Jobs successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 128 CUPS-Set-Default successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 169 CUPS-Add-Modify-Printer successful-ok
localhost - root [28/Nov/2022:09:56:14 -0500] "POST /admin/ HTTP/1.1" 200 158 CUPS-Add-Modify-Printer successful-ok
localhost - - [28/Nov/2022:09:56:23 -0500] "POST /printers/Canon-MF3010 HTTP/1.1" 200 413 Print-Job successful-ok
localhost - - [28/Nov/2022:09:56:23 -0500] "POST / HTTP/1.1" 200 362 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:09:56:37 -0500] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
localhost - - [28/Nov/2022:10:01:03 -0500] "POST / HTTP/1.1" 200 273 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:10:01:21 -0500] "GET /admin/conf/cupsd.conf HTTP/1.1" 401 0 - -
localhost - root [28/Nov/2022:10:01:21 -0500] "GET /admin/conf/cupsd.conf HTTP/1.1" 200 6565 - -
localhost - root [28/Nov/2022:10:01:25 -0500] "PUT /admin/conf/cupsd.conf HTTP/1.1" 201 4713 - -
localhost - - [28/Nov/2022:10:01:44 -0500] "POST / HTTP/1.1" 401 75 CUPS-Get-Devices successful-ok
localhost - root [28/Nov/2022:10:01:44 -0500] "POST / HTTP/1.1" 200 2298 CUPS-Get-Devices -
localhost - root [28/Nov/2022:10:04:08 -0500] "PUT /admin/conf/cupsd.conf HTTP/1.1" 201 4785 - -
localhost - - [28/Nov/2022:10:04:11 -0500] "GET /admin/log/error_log HTTP/1.1" 401 0 - -
localhost - root [28/Nov/2022:10:04:11 -0500] "GET /admin/log/error_log HTTP/1.1" 200 12570 - -
localhost - root [28/Nov/2022:10:04:11 -0500] "POST / HTTP/1.1" 200 277 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:10:04:19 -0500] "POST /printers/Canon-MF3010 HTTP/1.1" 200 413 Print-Job successful-ok
localhost - root [28/Nov/2022:10:05:06 -0500] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
localhost - root [28/Nov/2022:10:05:06 -0500] "PUT /admin/conf/cupsd.conf HTTP/1.1" 201 4777 - -
localhost - - [28/Nov/2022:10:05:07 -0500] "GET /admin/log/error_log HTTP/1.1" 401 0 - -
localhost - root [28/Nov/2022:10:05:07 -0500] "GET /admin/log/error_log HTTP/1.1" 200 52265 - -
localhost - - [28/Nov/2022:10:05:10 -0500] "PUT /admin/conf/cupsd.conf HTTP/1.1" 401 0 - -
localhost - root [28/Nov/2022:10:05:10 -0500] "PUT /admin/conf/cupsd.conf HTTP/1.1" 201 4736 - -
localhost - - [28/Nov/2022:10:05:17 -0500] "POST / HTTP/1.1" 200 362 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:10:05:17 -0500] "POST / HTTP/1.1" 200 362 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:10:05:25 -0500] "POST /jobs/ HTTP/1.1" 200 138 Cancel-Job successful-ok
localhost - - [28/Nov/2022:10:05:41 -0500] "POST /jobs/ HTTP/1.1" 200 168 Set-Job-Attributes successful-ok
localhost - - [28/Nov/2022:10:05:45 -0500] "POST /jobs/ HTTP/1.1" 200 165 Set-Job-Attributes successful-ok
localhost - - [28/Nov/2022:10:05:49 -0500] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
localhost - - [28/Nov/2022:10:05:49 -0500] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
localhost - - [28/Nov/2022:10:24:07 -0500] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
localhost - - [28/Nov/2022:13:50:19 -0500] "POST / HTTP/1.1" 200 360 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:13:50:52 -0500] "POST / HTTP/1.1" 200 362 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:14:07:32 -0500] "POST / HTTP/1.1" 200 360 Create-Printer-Subscriptions successful-ok
localhost - - [28/Nov/2022:14:08:06 -0500] "POST / HTTP/1.1" 200 362 Create-Printer-Subscriptions successful-ok
root error log:

Code: Select all

E [28/Nov/2022:04:55:16 -0500] Unknown directive IdleExitTimeout on line 32 of /etc/cups/cupsd.conf.
E [28/Nov/2022:04:55:16 -0500] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [28/Nov/2022:09:55:56 -0500] [CGI] Unable to execute ippfind utility: No such file or directory
E [28/Nov/2022:09:56:09 -0500] [cups-driverd] Bad driver information file \"/usr/share/cups/drv/sample.drv\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/C410sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/C420sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/C43xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-300sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-310sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-320sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-360sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-600sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-610sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-620sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLP-660sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLX-216xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLX-3160sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLX-3170sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLX-3180sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/CLX-6220sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/K2200sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M2020sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M2070sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M262xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M267xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M283xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M288xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M301xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M306xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M332xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/M337xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/ML-2160sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/ML-2540sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/ML-2950sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/SCX-3400sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/SCX-4650sc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/SCX-470xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/SCX-472xsc.cts\"!
E [28/Nov/2022:09:56:10 -0500] [cups-driverd] Bad driver information file \"/usr/share/ppd/suld/cms/SF-760sc.cts\"!
E [28/Nov/2022:09:56:11 -0500] [CGI] Unable to execute ippfind utility: No such file or directory
E [28/Nov/2022:10:01:25 -0500] Unknown directive IdleExitTimeout on line 13 of /etc/cups/cupsd.conf.
W [28/Nov/2022:10:01:25 -0500] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
W [28/Nov/2022:10:01:25 -0500] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Canon-MF3010-Gray..\' already exists
E [28/Nov/2022:10:01:44 -0500] [CGI] Unable to execute ippfind utility: No such file or directory
I [28/Nov/2022:10:04:08 -0500] Listening to 0.0.0.0:631 (IPv4)
I [28/Nov/2022:10:04:08 -0500] Listening to [v1.::]:631 (IPv6)
I [28/Nov/2022:10:04:08 -0500] Listening to /var/run/cups/cups.sock (Domain)
E [28/Nov/2022:10:04:08 -0500] Unknown directive IdleExitTimeout on line 12 of /etc/cups/cupsd.conf.
E [28/Nov/2022:10:04:08 -0500] Unknown directive JobPrivateAccess on line 126 of /etc/cups/cupsd.conf.
E [28/Nov/2022:10:04:08 -0500] Unknown directive JobPrivateValues on line 127 of /etc/cups/cupsd.conf.
E [28/Nov/2022:10:04:08 -0500] Unknown directive SubscriptionPrivateAccess on line 128 of /etc/cups/cupsd.conf.
E [28/Nov/2022:10:04:08 -0500] Unknown directive SubscriptionPrivateValues on line 129 of /etc/cups/cupsd.conf.
I [28/Nov/2022:10:04:08 -0500] Remote access is enabled.
D [28/Nov/2022:10:04:08 -0500] Added auto ServerAlias porteus.example.net
D [28/Nov/2022:10:04:08 -0500] Added auto ServerAlias porteus
I [28/Nov/2022:10:04:08 -0500] Loaded configuration file "/etc/cups/cupsd.conf"
D [28/Nov/2022:10:04:08 -0500] Using keychain "/Library/Keychains/System.keychain" for server name "porteus.example.net".
I [28/Nov/2022:10:04:08 -0500] Configured for up to 100 clients.
I [28/Nov/2022:10:04:08 -0500] Allowing up to 100 client connections per host.
I [28/Nov/2022:10:04:08 -0500] Using policy "default" as the default.
D [28/Nov/2022:10:04:08 -0500] cupsdMarkDirty(P----)
D [28/Nov/2022:10:04:08 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs"
D [28/Nov/2022:10:04:08 -0500] load_ppd: Loading /etc/cups/ppd/Canon-MF3010.ppd...
D [28/Nov/2022:10:04:08 -0500] load_ppd: Saving /var/cache/cups/Canon-MF3010.data...
D [28/Nov/2022:10:04:08 -0500] cupsdRegisterPrinter(p=0x55dc119de940(Canon-MF3010))
D [28/Nov/2022:10:04:08 -0500] cupsdMarkDirty(--p--)
D [28/Nov/2022:10:04:08 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [28/Nov/2022:10:04:08 -0500] Partial reload complete.
D [28/Nov/2022:10:04:08 -0500] Calling FindDeviceById(cups-Canon-MF3010)
D [28/Nov/2022:10:04:08 -0500] Calling DeleteDevice(/org/freedesktop/ColorManager/devices/cups_Canon_MF3010)
D [28/Nov/2022:10:04:08 -0500] Using profile ID "Canon-MF3010-Gray..".
D [28/Nov/2022:10:04:08 -0500] Calling CreateProfile(Canon-MF3010-Gray..,temp)
W [28/Nov/2022:10:04:08 -0500] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Canon-MF3010-Gray..\' already exists
I [28/Nov/2022:10:04:08 -0500] Registering ICC color profiles for "Canon-MF3010".
D [28/Nov/2022:10:04:08 -0500] Calling CreateDevice(cups-Canon-MF3010,temp)
D [28/Nov/2022:10:04:08 -0500] Created device "/org/freedesktop/ColorManager/devices/cups_Canon_MF3010".
I [28/Nov/2022:10:04:08 -0500] Listening to 0.0.0.0:631 on fd 5...
I [28/Nov/2022:10:04:08 -0500] Listening to [v1.::]:631 on fd 7...
I [28/Nov/2022:10:04:08 -0500] Listening to /var/run/cups/cups.sock on fd 8...
I [28/Nov/2022:10:04:08 -0500] Resuming new connection processing...
D [28/Nov/2022:10:04:08 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:08 -0500] Discarding unused server-restarted event...
D [28/Nov/2022:10:04:09 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:09 -0500] [Client 77] Server address is "/var/run/cups/cups.sock".
D [28/Nov/2022:10:04:09 -0500] [Client 77] Accepted from localhost (Domain)
D [28/Nov/2022:10:04:09 -0500] [Client 77] Waiting for request.
I [28/Nov/2022:10:04:09 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:09 -0500] cupsdAddCert: Adding certificate for PID 0
D [28/Nov/2022:10:04:09 -0500] Report: clients=1
D [28/Nov/2022:10:04:09 -0500] Report: jobs=1
D [28/Nov/2022:10:04:09 -0500] Report: jobs-active=1
D [28/Nov/2022:10:04:09 -0500] Report: printers=1
D [28/Nov/2022:10:04:09 -0500] Report: stringpool-string-count=1689
D [28/Nov/2022:10:04:09 -0500] Report: stringpool-alloc-bytes=10664
D [28/Nov/2022:10:04:09 -0500] Report: stringpool-total-bytes=29904
D [28/Nov/2022:10:04:09 -0500] PID 1954 (/usr/lib64/cups/notifier/dbus) exited with no errors.
I [28/Nov/2022:10:04:10 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:11 -0500] [Client 77] GET /admin/log/error_log HTTP/1.1
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 77] Read: status=200, state=3
D [28/Nov/2022:10:04:11 -0500] [Client 77] No authentication data provided.
D [28/Nov/2022:10:04:11 -0500] cupsdIsAuthorized: username=""
D [28/Nov/2022:10:04:11 -0500] [Client 77] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [28/Nov/2022:10:04:11 -0500] [Client 77] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [28/Nov/2022:10:04:11 -0500] [Client 77] Closing connection.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
I [28/Nov/2022:10:04:11 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 78] Server address is "/var/run/cups/cups.sock".
D [28/Nov/2022:10:04:11 -0500] [Client 78] Accepted from localhost (Domain)
D [28/Nov/2022:10:04:11 -0500] [Client 78] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 79] Server address is "/var/run/cups/cups.sock".
D [28/Nov/2022:10:04:11 -0500] [Client 79] Accepted from localhost (Domain)
D [28/Nov/2022:10:04:11 -0500] [Client 79] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] [Client 78] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [28/Nov/2022:10:04:11 -0500] [Client 78] Closing connection.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Server address is "/var/run/cups/cups.sock".
D [28/Nov/2022:10:04:11 -0500] [Client 80] Accepted from localhost (Domain)
D [28/Nov/2022:10:04:11 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] [Client 79] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [28/Nov/2022:10:04:11 -0500] [Client 79] Closing connection.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] GET /admin/log/error_log HTTP/1.1
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Read: status=200, state=3
D [28/Nov/2022:10:04:11 -0500] [Client 80] Authorized as root using PeerCred.
D [28/Nov/2022:10:04:11 -0500] cupsdIsAuthorized: username="root"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Processing GET /admin/log/error_log
D [28/Nov/2022:10:04:11 -0500] [Client 80] filename="/var/log/cups/error_log", type=text/plain
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdSendHeader: code=200, type="text/plain", auth_type=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] Sending file.
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12570, response=(nil)(), pipe_pid=0, file=13
D [28/Nov/2022:10:04:11 -0500] [Client 80] Flushing write buffer.
D [28/Nov/2022:10:04:11 -0500] [Client 80] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:11 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] POST / HTTP/1.1
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Read: status=200, state=6
D [28/Nov/2022:10:04:11 -0500] [Client 80] Authorized as root using PeerCred.
D [28/Nov/2022:10:04:11 -0500] [Client 80] 2.0 Get-Jobs 29
D [28/Nov/2022:10:04:11 -0500] Get-Jobs ipp://localhost/printers/
D [28/Nov/2022:10:04:11 -0500] [Client 80] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [28/Nov/2022:10:04:11 -0500] [Client 80] Content-Length: 188
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=188, response=0x55dc119d3c40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [28/Nov/2022:10:04:11 -0500] [Client 80] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] bytes=0, http_state=0, data_remaining=188
D [28/Nov/2022:10:04:11 -0500] [Client 80] Flushing write buffer.
D [28/Nov/2022:10:04:11 -0500] [Client 80] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:11 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] POST / HTTP/1.1
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Read: status=200, state=6
D [28/Nov/2022:10:04:11 -0500] [Client 80] Authorized as root using PeerCred.
D [28/Nov/2022:10:04:11 -0500] [Client 80] 2.0 Get-Jobs 30
D [28/Nov/2022:10:04:11 -0500] Get-Jobs ipp://localhost/printers/
I [28/Nov/2022:10:04:11 -0500] [Client 80] Limiting Get-Jobs response to 500 jobs.
D [28/Nov/2022:10:04:11 -0500] [Client 80] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [28/Nov/2022:10:04:11 -0500] [Client 80] Content-Length: 89
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=89, response=0x55dc11a86620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [28/Nov/2022:10:04:11 -0500] [Client 80] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] bytes=0, http_state=0, data_remaining=89
D [28/Nov/2022:10:04:11 -0500] [Client 80] Flushing write buffer.
D [28/Nov/2022:10:04:11 -0500] [Client 80] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:11 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] POST / HTTP/1.1
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Read: status=200, state=6
D [28/Nov/2022:10:04:11 -0500] [Client 80] Authorized as root using PeerCred.
D [28/Nov/2022:10:04:11 -0500] [Client 80] 2.0 Create-Printer-Subscriptions 31
D [28/Nov/2022:10:04:11 -0500] Create-Printer-Subscriptions /
D [28/Nov/2022:10:04:11 -0500] create_subscriptions(con=0x55dc11a75b80(80), uri="/")
D [28/Nov/2022:10:04:11 -0500] pullmethod="ippget"
D [28/Nov/2022:10:04:11 -0500] notify-lease-duration=86400
D [28/Nov/2022:10:04:11 -0500] notify-time-interval=0
D [28/Nov/2022:10:04:11 -0500] cupsdAddSubscription(mask=17800, dest=(nil)(), job=(nil)(0), uri="(null)")
D [28/Nov/2022:10:04:11 -0500] Added subscription #5 for server.
D [28/Nov/2022:10:04:11 -0500] cupsdMarkDirty(----S)
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:11 -0500] [Client 80] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [28/Nov/2022:10:04:11 -0500] [Client 80] Content-Length: 107
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:11 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55dc119d3c40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [28/Nov/2022:10:04:11 -0500] [Client 80] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [28/Nov/2022:10:04:11 -0500] [Client 80] bytes=0, http_state=0, data_remaining=107
D [28/Nov/2022:10:04:11 -0500] [Client 80] Flushing write buffer.
D [28/Nov/2022:10:04:11 -0500] [Client 80] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:11 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:11 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:12 -0500] [Client 80] POST / HTTP/1.1
D [28/Nov/2022:10:04:12 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:12 -0500] [Client 80] Read: status=200, state=6
D [28/Nov/2022:10:04:12 -0500] [Client 80] Authorized as root using PeerCred.
D [28/Nov/2022:10:04:12 -0500] [Client 80] 2.0 Get-Notifications 32
D [28/Nov/2022:10:04:12 -0500] Get-Notifications /
D [28/Nov/2022:10:04:12 -0500] cupsdIsAuthorized: username="root"
D [28/Nov/2022:10:04:12 -0500] [Client 80] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [28/Nov/2022:10:04:12 -0500] [Client 80] Content-Length: 127
D [28/Nov/2022:10:04:12 -0500] [Client 80] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [28/Nov/2022:10:04:12 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:12 -0500] [Client 80] con->http=0x55dc119e34a0
D [28/Nov/2022:10:04:12 -0500] [Client 80] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x55dc11a86620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [28/Nov/2022:10:04:12 -0500] [Client 80] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [28/Nov/2022:10:04:12 -0500] [Client 80] bytes=0, http_state=0, data_remaining=127
D [28/Nov/2022:10:04:12 -0500] [Client 80] Flushing write buffer.
D [28/Nov/2022:10:04:12 -0500] [Client 80] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:12 -0500] [Client 80] Waiting for request.
D [28/Nov/2022:10:04:12 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
I [28/Nov/2022:10:04:13 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [28/Nov/2022:10:04:19 -0500] [Client 81] Server address is "/var/run/cups/cups.sock".
D [28/Nov/2022:10:04:19 -0500] [Client 81] Accepted from localhost (Domain)
D [28/Nov/2022:10:04:19 -0500] [Client 81] Waiting for request.
I [28/Nov/2022:10:04:19 -0500] Expiring subscriptions...
D [28/Nov/2022:10:04:19 -0500] [Client 81] POST /printers/Canon-MF3010 HTTP/1.1
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:19 -0500] [Client 81] Read: status=200, state=6
D [28/Nov/2022:10:04:19 -0500] [Client 81] No authentication data provided.
D [28/Nov/2022:10:04:19 -0500] [Client 81] 2.0 Print-Job 33
D [28/Nov/2022:10:04:19 -0500] Print-Job ipp://localhost/printers/Canon-MF3010
D [28/Nov/2022:10:04:19 -0500] [Job ???] Auto-typing file...
I [28/Nov/2022:10:04:19 -0500] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [28/Nov/2022:10:04:19 -0500] cupsdMarkDirty(---J-)
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:19 -0500] [Job 2] Applying default options...
D [28/Nov/2022:10:04:19 -0500] add_job: requesting-user-name="root"
D [28/Nov/2022:10:04:19 -0500] Adding default job-sheets values "none,none"...
I [28/Nov/2022:10:04:19 -0500] [Job 2] Adding start banner page "none".
D [28/Nov/2022:10:04:19 -0500] Notifier dbus started - PID = 2041
D [28/Nov/2022:10:04:19 -0500] cupsdMarkDirty(----S)
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [28/Nov/2022:10:04:19 -0500] cupsdMarkDirty(---J-)
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
I [28/Nov/2022:10:04:19 -0500] [Job 2] Adding end banner page "none".
I [28/Nov/2022:10:04:19 -0500] [Job 2] File of type application/vnd.cups-pdf-banner queued by "root".
D [28/Nov/2022:10:04:19 -0500] [Job 2] hold_until=0
I [28/Nov/2022:10:04:19 -0500] [Job 2] Queued on "Canon-MF3010" by "root".
D [28/Nov/2022:10:04:19 -0500] [Client 81] Returning IPP successful-ok for Print-Job (ipp://localhost/printers/Canon-MF3010) from localhost.
D [28/Nov/2022:10:04:19 -0500] [Client 81] Content-Length: 191
D [28/Nov/2022:10:04:19 -0500] [Client 81] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [28/Nov/2022:10:04:19 -0500] [Client 81] con->http=0x55dc11abe000
D [28/Nov/2022:10:04:19 -0500] [Client 81] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=191, response=0x55dc119de030(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [28/Nov/2022:10:04:19 -0500] [Client 81] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [28/Nov/2022:10:04:19 -0500] [Client 81] bytes=0, http_state=0, data_remaining=191
D [28/Nov/2022:10:04:19 -0500] [Client 81] Flushing write buffer.
D [28/Nov/2022:10:04:19 -0500] [Client 81] New state is HTTP_STATE_WAITING
D [28/Nov/2022:10:04:19 -0500] [Client 81] Waiting for request.
D [28/Nov/2022:10:04:19 -0500] cupsdSetBusyState: newbusy="Printing jobs and dirty

User avatar
Blaze
DEV Team
DEV Team
Posts: 3869
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Canon imageCLASS MF3010 VP [SOLVED]

Post#29 by Blaze » 29 Nov 2022, 08:47

1) Did you try to print from LibreOffice (is better way) or any notepad (not pages from web browser)?
2) Do you have latest updates from Porteus Settings Centre -> Update Porteus (you can get it from this place)?
If you are using usb, plug your switched on device into your machine and then open http://localhost:631 and go "Administration" and then "Add Printer". Enter "root" for the username and the root password. Your usb device should be shown on the list and start with "usb://". Select it and follow the dialogs through picking the correct driver for your device.
Try to print. Then open a terminal and run:

Code: Select all

su
toor
lpstat -t
egrep "error|backend" /var/log/cups/error_log
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Karmi
Samurai
Samurai
Posts: 162
Joined: 03 Apr 2022, 19:46
Distribution: Linux
Location: Old Town, Florida USA

Canon imageCLASS MF3010 VP [SOLVED]

Post#30 by Karmi » 29 Nov 2022, 14:01

Blaze wrote:
29 Nov 2022, 08:47
1) Did you try to print from LibreOffice (is better way) or any notepad (not pages from web browser)?
2) Do you have latest updates from Porteus Settings Centre -> Update Porteus (you can get it from this place)?
If you are using usb, plug your switched on device into your machine and then open http://localhost:631 and go "Administration" and then "Add Printer". Enter "root" for the username and the root password. Your usb device should be shown on the list and start with "usb://". Select it and follow the dialogs through picking the correct driver for your device.
Try to print. Then open a terminal and run:

Code: Select all

su
toor
lpstat -t
egrep "error|backend" /var/log/cups/error_log
This is probably too technical for me, e.g., I don't understand what the "http://localhost:631" is or where it is. Had to experiment by adding it to a url setting in the print app...something like that. However, that method led to a different setup this time where I selected Canon for printer, and then went to a long list of drivers where there was a "MF3010" driver that was "recommended."

I never saw the "usb://" that you mentioned.

Then I - Typed in:
su
toor
lpstat -t

Got this:

Code: Select all

guest@porteus:~$ su
toor
lpstat -t
egrep "error|backend" /var/log/cups/error_log
Password: 
root@porteus:/home/guest# lpstat -t
scheduler is running
system default destination: Canon-MF3010
device for Canon-MF3010: cnusbufr2:/dev/usb/lp0
Canon-MF3010 accepting requests since Tue 29 Nov 2022 08:35:10 AM Local time zone must be set--see zic manual page
printer Canon-MF3010 now printing Canon-MF3010-3.  enabled since Tue 29 Nov 2022 08:35:10 AM Local time zone must be set--see zic manual page
	Rendering completed
Canon-MF3010-3          guest            26624   Tue 29 Nov 2022 08:35:10 AM Local time zone must be set--see zic manual page
root@porteus:/home/guest# 
Then I - Typed in:
egrep "error|backend" /var/log/cups/error_log

Got this:

Code: Select all

root@porteus:/home/guest# egrep "error|backend" /var/log/cups/error_log
D [29/Nov/2022:08:34:04 +0000] [Client 84] GET /admin/log/error_log HTTP/1.1
D [29/Nov/2022:08:34:04 +0000] [Client 85] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [29/Nov/2022:08:34:04 +0000] [Client 86] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [29/Nov/2022:08:34:04 +0000] [Client 87] GET /admin/log/error_log HTTP/1.1
D [29/Nov/2022:08:34:04 +0000] [Client 87] Processing GET /admin/log/error_log
D [29/Nov/2022:08:34:04 +0000] [Client 87] filename="/var/log/cups/error_log", type=text/plain
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12398, response=(nil)(), pipe_pid=0, file=13
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x557fd4a5b0b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=315, response=0x557fd4a7ffe0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [29/Nov/2022:08:34:04 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x557fd4a7b4f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [29/Nov/2022:08:34:05 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x557fd4a7b4f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [29/Nov/2022:08:34:11 +0000] [Client 87] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x557fd49b48e0(IPP_STATE_DATA), pipe_pid=0, file=-1
root@porteus:/home/guest# 
Just too technical for me or this printer isn't going to work wid Porteus...

Post Reply