Porteus

Porteus User Forum
https://forum.porteus.org/

Restarting with PorteuX. Problems with 0.7

https://forum.porteus.org/viewtopic.php?f=146&t=11081

Page 1 of 1

Restarting with PorteuX. Problems with 0.7

Posted: 06 Nov 2023, 04:45
by Ed_P
I lost my Porteux system a couple of months ago so I'm starting over, basically from scratch.

I'm booting the porteux-v0.7-xfce-4.18-stable-x86_64.iso and find that bash scripts, that run in Porteus, don't run when I click on them. What do I need to do to make them runable?

Added in 47 minutes 45 seconds:
And Porteux 0.7 isn't picking up my extramod= cheatcode.

Code: Select all

menuentry " PorteuX " --class slackware   --class icon-porteus  {

     set linux_folder=/porteusx
     set iso=/ISOs/porteux/porteux-v0.7-xfce-4.18-stable-x86_64.iso
     
     set bootdrv=$root
     search -f $iso --set=root

     set porteus_parms="extramod=$linux_folder/Modules;$linux_folder/modsavedat noload=save.dat volume=33 reboot=cold"

     loopback loop $iso
     linux (loop)/boot/syslinux/vmlinuz from=$iso $porteus_parms
     initrd (loop)/boot/syslinux/initrd.zst
     echo "Booting PorteuX" 
}
Added in 16 hours 36 minutes 29 seconds:
Same problems with porteux-v0.7-xfce-4.18-current-x86_64.iso. :(

Restarting with PorteuX. Problems with 0.7

Posted: 06 Nov 2023, 23:18
by beny
hi Ed_P, this is the extramod on cheatcode:where is the path of yours directory or am i wrong

extramod=/path/folder_with_modules
extramod=/path/folder_with_modules;/path2/folder_with_modules

... This cheatcode lets you load modules from one or more external
folders that are located outside of the /porteux directory.
Multiple folders can be specified, with full paths separated by
a semicolon without any spaces.
Examples:
'extramod=/mnt/sdb3/porteux-modules'
'extramod=/mnt/sdb3/porteux-modules;/mnt/sdc4/inkscape_modules'

Restarting with PorteuX. Problems with 0.7

Posted: 07 Nov 2023, 03:59
by Ed_P
Thank you beny, I am aware of the syntax.

Code: Select all

guest@porteux:~$ cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/porteux/porteux-v0.7-xfce-4.18-current-x86_64.iso extramod=/porteusx/Modules;/porteusx/modsavedat noload=save.dat volume=33 reboot=cold
guest@porteux:~$
And since the /porteux folder is on the same drive as the ISOs folder root is pointing to the folders referenced.

Code: Select all

guest@porteux:~$ ls -on /mnt/nvme0n1p7
total 76
drwxrwxrwx 1 1000     0 Oct  7 17:47 $RECYCLE.BIN/
drwxrwxrwx 1 1000  4096 Jan 24  2018 Dell/
drwxrwxrwx 1 1000     0 Jan 26  2018 Dell-Recovery/
drwxrwxrwx 1 1000     0 Mar 12  2018 efi/
drwxrwxrwx 1 1000  4096 Apr 28  2018 emoticons/
drwxrwxrwx 1 1000     0 Nov 28  2022 grub2/
drwxrwxrwx 1 1000 32768 Nov  5 06:03 ISOs/                                  <<<<<<<<<<<<<<<<<<<
drwxrwxrwx 1 1000  4096 Jan 11  2018 porteus3.0/
drwxrwxrwx 1 1000  4096 Jan 25  2020 porteus3.2/
drwxrwxrwx 1 1000  8192 Mar 25  2022 porteus4.0/
drwxrwxrwx 1 1000  8192 Oct 26 05:31 porteus5.0/
drwxrwxrwx 1 1000     0 Nov  6 02:55 porteux/                                <<<<<<<<<<<<<<<<<<<
drwxrwxrwx 1 1000     0 Nov  3 04:07 Recovery/
-rwxrwxrwx 1 1000  1019 Nov  6 18:07 syntax.report.txt*
drwxrwxrwx 1 1000  4096 Nov  4 22:48 System\ Volume\ Information/
drwxrwxrwx 1 1000  4096 Oct 15 18:20 Users/
guest@porteux:~$

Code: Select all

guest@porteux:~$ ls -on /mnt/nvme0n1p7/porteux
total 0
drwxrwxrwx 1 1000 0 Nov  6 19:57 Guest/
drwxrwxrwx 1 1000 0 Nov  6 02:54 modsavedat/                            <<<<<<<<<<<<<<
drwxrwxrwx 1 1000 0 Nov  6 05:21 Modules/                               <<<<<<<<<<<<<<
guest@porteux:~$

Restarting with PorteuX. Problems with 0.7

Posted: 07 Nov 2023, 16:07
by beny
ok, but where is porteusx directory? If it is the path of extramod

Restarting with PorteuX. Problems with 0.7

Posted: 07 Nov 2023, 19:18
by Ed_P
Hi beny. As seen in the 2nd code box in my prior posting above, the extramod directories are in the porteux directory.

I tried this last night with PorteuX 0.6 ISOs and same problem. I think when I lost my files I had only tested up to PorteuX 0.5 so I guess I will try it next, because I used to be able to boot Porteux with extramods. The grub2 approach I'm using is the same one I've used for years with Porteus and other Linux ISOs and since the ISOs and support directories are all on the same drive it works.

Added in 53 minutes 44 seconds:
Well this is getting stranger and stranger. I was able to take a picture of the boot screen with my phone. And in the picture porteux is seen stating:

Code: Select all

loading additional modules in /porteux/Modules
loading additional modules in /porteux/modsavedat
:o :good:

And in /porteux/Modules is:

Code: Select all

guest@porteus:/mnt/nvme0n1p7/porteux$ ls -on Modules
total 105048
-rwxrwxrwx 1 1000 33947648 Nov  5 00:31 003-cinnamon-5.8.0-current-20230630.xzm*
-rwxrwxrwx 1 1000 73023488 Oct 31 16:05 firefox-119.0-x86_64-en-US.xzm*
-rwxrwxrwx 1 1000   598016 Nov  5 00:29 keepassx-20230529-x86_64-1.xzm*
guest@porteus:/mnt/nvme0n1p7/porteux$
So why aren't they being loaded? :%) Because /mnt/nvme0n1p7/porteux is on a NTFS drive? Because porteux doesn't work with .xzm modules? :hmmm:

Restarting with PorteuX. Problems with 0.7

Posted: 07 Nov 2023, 21:22
by beny
hi Ed_P the slpkg with all deps are loaded without trouble in porteux, i don't have a ntfs system the ext4 path work
LABEL text
MENU LABEL Text Mode
KERNEL /boot/syslinux/vmlinuz
INITRD /boot/syslinux/initrd.zst
APPEND changes=/porteux 3 extramod=/mnt/sda1/tmp/vcpkg

Restarting with PorteuX. Problems with 0.7

Posted: 08 Nov 2023, 06:29
by Ed_P
Same situation with porteux-v0.5-xfce-4.18-current-x86_64.iso which I'm sure worked before I lost all my files. :hammer:

New problem: with porteux running I closed the lid on my notebook and when I opened it a few minutes later I got:

Code: Select all

None of the screen lock tools ran successfully, the screen will not be locked.

Restarting with PorteuX. Problems with 0.7

Posted: 08 Nov 2023, 09:49
by Rapha_
Ed_P wrote: ↑
07 Nov 2023, 03:59
 guest@porteux:~$ cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/porteux/porteux-v0.7-xfce-4.18-current-x86_64.iso extramod=/porteusx/Modules;/porteusx/modsavedat noload=save.dat volume=33 reboot=cold
guest@porteux:~$
from=your.iso No, in this way it search in the path inside the iso !


In extramod it should be with full path like this :

extramod=/mnt/nvme0n1p7/porteusx/Modules;/mnt/nvme0n1p7/porteusx/modsavedat

Restarting with PorteuX. Problems with 0.7

Posted: 08 Nov 2023, 16:43
by Ed_P
Thanks Rapha. This is how I boot Porteus 5.01:

Code: Select all

guest@porteus:~$ cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/Porteus-CINNAMON-v5.01-x86_64.iso volume=33 reboot=cold extramod=/porteus5.0/Modules noload=kde;jinn;lxqt;xfce;lxde;mate;open;dat.xzm
guest@porteus:~$
(and 5.0rc3 and 4.0 and 3.2 and 3.0 and ..... which is why this problem is so strange for me.) :)
BTW The value of root for /mnt/nvme0nip7 is hd0,gpt7.

I am thinking of trying your, and beny's, suggestion, later today.


Added in 4 hours 29 minutes 36 seconds:
Here's what I got using extramod=/mnt/nvme0n1p7/porteusx/Modules;/mnt/nvme0n1p7/porteusx/modsavedat.
Image

Image

Restarting with PorteuX. Problems with 0.7

Posted: 08 Nov 2023, 22:45
by Rapha_
Ed_P wrote: ↑
08 Nov 2023, 21:13
 Thanks Rapha. This is how I boot Porteus 5.01:

Code: Select all

guest@porteus:~$ cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/Porteus-CINNAMON-v5.01-x86_64.iso volume=33 reboot=cold extramod=/porteus5.0/Modules noload=kde;jinn;lxqt;xfce;lxde;mate;open;dat.xzm
guest@porteus:~$
I don't see initrd :unknown:

Restarting with PorteuX. Problems with 0.7

Posted: 09 Nov 2023, 01:09
by Ed_P
Do you see it here? :D
Ed_P wrote: ↑
06 Nov 2023, 22:09

Code: Select all

menuentry " PorteuX " --class slackware   --class icon-porteus  {

     set linux_folder=/porteusx
     set iso=/ISOs/porteux/porteux-v0.7-xfce-4.18-stable-x86_64.iso
     
     set bootdrv=$root
     search -f $iso --set=root

     set porteus_parms="extramod=$linux_folder/Modules;$linux_folder/modsavedat noload=save.dat volume=33 reboot=cold"

     loopback loop $iso
     linux (loop)/boot/syslinux/vmlinuz from=$iso $porteus_parms
     initrd (loop)/boot/syslinux/initrd.zst
     echo "Booting PorteuX"  
}
What does your cat /proc/cmdline look like?


Added in 5 hours 5 minutes 29 seconds:
Progress :good:

I found an old grub2 PorteuX menu on a USB stick. :Yahoo!:

Code: Select all

menuentry " PorteuX 0.5 ISO - Cinnamon"  --class slackware   --class icon-porteux  {

     set linux_folder=/porteux
     set iso="/ISOs/porteux/porteux-v0.5-xfce-4.18-stable-x86_64.iso"

     set bootparms="volume=33 reboot=cold extramod=$linux_folder/Modules \
       kmap=us noload=mate;lxqt;xfce;-test norootcopy"   # cinn"

     search -f $iso --set=root
     loopback loop $iso
     linux (loop)/boot/syslinux/vmlinuz      from=$iso $bootparms
     initrd (loop)/boot/syslinux/initrd.zst
     }
And it reads the extramod=$linux_folder/Modules folder. :celebrate14:

Unfortunately, it doesn't boot. :wall:

Code: Select all

porteux login: /usr/sbin/lxdm-binary: /lib64/libc.so.6: version 'GLIBC_2.34' not found (required by /usr/sbin/lxdm-binary)
Followed by a bunch of 'not found' msgs which end with INIT: Id "x1" respawning too fast: disabled for 5 minutes
And at the end of 5 minutes the errors repeat.

But this is using Porteux 0.5. :) Next to try this menu with Porteux 0.6 and 0.7. :good:


Added in 25 minutes 15 seconds:
Same problem with PorteuX 0.6 and 0.7. :medic:

Restarting with PorteuX. Problems with 0.7

Posted: 09 Nov 2023, 09:40
by porteux
@Ed_P, please don't mix stable and current modules.

Restarting with PorteuX. Problems with 0.7

Posted: 09 Nov 2023, 14:50
by Ed_P
porteux wrote: ↑
09 Nov 2023, 09:40
 @Ed_P, please don't mix stable and current modules.
:shock:

Code: Select all

guest@porteux:~$ cat /proc/cmdline
quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/PorteuX/porteux-v0.6-xfce-4.18-current-x86_64.iso volume=33 reboot=cold extramod=/porteux/Modules;/porteux/modsavedat kmap=us noload=mate;lxqt;xfce;-test norootcopy
guest@porteux:~$ ls -l /mnt/live/memory/images
total 0
drwxr-xr-x  5 root root  61 Sep  4 12:40 000-kernel-6.5.1.xzm/
drwxr-xr-x 21 root root 317 Sep  9 09:20 001-core-current-20230906.xzm/
drwxr-xr-x 11 root root 154 Sep  6 19:16 002-xorg-current-20230906.xzm/
drwxr-xr-x  5 root root  60 Feb  3  2023 002-xtra-current-20230906.xzm/
drwxr-xr-x 10 root root 117 Jul  1 21:16 003-cinnamon-5.8.0-current-20230630.xzm/
drwxr-xr-x  4 root root  37 Oct 31 20:05 firefox-119.0-x86_64-en-US.xzm/
drwxr-xr-x  3 root root  26 May 28 22:48 keepassx-20230529-x86_64-1.xzm/
guest@porteux:~$
:worthy: :worthy: :worthy: Thank you. :worship: :worship: :worship:

I did not pick up on the 003 module's release in it's name. :wall:

Now to test 0.7. Thank you porteux. :beer:

Added in 20 minutes 47 seconds:
As always, the most difficult computer problems have the simplest solutions. :pardon:


Added in 2 hours 15 minutes 55 seconds:
A new problem.

Code: Select all

#!/bin/sh

# https://forum.porteus.org/viewtopic.php?p=94878#p94878

if [ `whoami` != "root" ]; then
   echo -e "Enter root's password\033[1;31m"
   su -c "sh $0 $1"
   exit
fi
echo -e "\033[0m"; echo -en "\033]0;Make a Mod\a"

if [ -d /tmp/mod/ ]; then
   rm -rf /tmp/mod
fi
mkdir -p /tmp/mod
 
xzm2dir /mnt/nvme0n1p7/porteux/Modules/003-*       -o=/tmp/mod
#xzm2dir /mnt/live/memory/images/003-*              -o=/tmp/mod    

#set -x
# https://forum.porteus.org/viewtopic.php?p=94844#p94844
# all settings in Cinnamon are stored in ~/.config/dconf/user
cp -a -p --parents /home/guest/.config/dconf/*        /tmp/mod/

# https://forum.porteus.org/viewtopic.php?p=94892#p94892 - wallpaper
cp -a -p --parents /home/guest/Pictures/pxfuel.jpg    /tmp/mod/

dir2xzm /tmp/mod -o=/tmp/mycinnamon.xzm   &&   rm -rf /tmp/mod

echo
echo "COPY the .xzm file to the folder you boot your modules from."
ls -on /tmp
sleep 20
exit
A simply script to save the change to the DE's taskbar location and it's wallpaper as a user module. But when executed produces:

Code: Select all

guest@porteux:~$ ./MyCinnamon.sh
bash: ./MyCinnamon.sh: cannot execute: required file not found
:o What simple thing am I missing now??? :hammer: A couple of other bash scripts run fine. :unknown:


Added in 5 hours 45 minutes 38 seconds:
dos2unix fixed the problem. Apparently I had made a change while in Windows. :shock: :evil:

:D

Added in 1 hour 55 minutes 28 seconds:
Finally able to move on to other PorteuX 0.7 pproblems. :happy62:
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/