I am not abble to start PorteuX 0.5 on the following assembled computer
Code: Select all
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 01)
02:03.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g
Code: Select all
Bus 002 Device 003: ID 0bda:0111 Generic USB2.0-CRW
Bus 002 Device 002: ID 0781:556b SanDisk Cruzer Edge
Bus 002 Device 001: ID 1d6b:0002 Linux 6.2.16-porteux ehci_hcd EHCI Host Controller
Bus 005 Device 001: ID 1d6b:0001 Linux 6.2.16-porteux uhci_hcd UHCI Host Controller
Bus 004 Device 001: ID 1d6b:0001 Linux 6.2.16-porteux uhci_hcd UHCI Host Controller
Bus 003 Device 001: ID 1d6b:0001 Linux 6.2.16-porteux uhci_hcd UHCI Host Controller
Bus 001 Device 001: ID 1d6b:0001 Linux 6.2.16-porteux uhci_hcd UHCI Host ControllerWhen I start in always fresh mode, the shell text il always blinking instead of loading XFCE desktop
When I start in text mode, log into root and launch Startx it fail with this Xorg.0.log
Code: Select all
[ 30.099]
X.Org X Server 1.20.14
X Protocol Version 11, Revision 0
[ 30.100] Build Operating System: Slackware 15.0 Slackware Linux Project
[ 30.100] Current Operating System: Linux porteux.example.net 6.2.16-porteux #1 SMP PREEMPT_DYNAMIC Mon Jun 26 23:24:16 NZST 2023 x86_64
[ 30.100] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz 3 initrd=/boot/syslinux/initrd.zst
[ 30.100] Build Date: 29 March 2023 01:43:21PM
[ 30.100]
[ 30.102] Current version of pixman: 0.40.0
[ 30.108] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.108] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.121] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 14 00:05:00 2007
[ 30.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.138] (==) No Layout section. Using the first Screen section.
[ 30.138] (==) No screen section available. Using defaults.
[ 30.138] (**) |-->Screen "Default Screen Section" (0)
[ 30.138] (**) | |-->Monitor "<default monitor>"
[ 30.139] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.139] (==) Automatically adding devices
[ 30.139] (==) Automatically enabling devices
[ 30.139] (==) Automatically adding GPU devices
[ 30.139] (==) Automatically binding GPU devices
[ 30.147] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 30.147] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 30.147] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[ 30.148] Entry deleted from font path.
[ 30.148] (==) FontPath set to:
/usr/share/fonts/TTF
[ 30.148] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 30.148] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.148] (II) Loader magic: 0x619c80
[ 30.148] (II) Module ABI versions:
[ 30.148] X.Org ANSI C Emulation: 0.4
[ 30.148] X.Org Video Driver: 24.1
[ 30.148] X.Org XInput driver : 24.1
[ 30.148] X.Org Server Extension : 10.0
[ 30.149] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 30.168] (--) PCI:*(0@0:2:0) 8086:2772:103c:2a57 rev 2, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe940000/262144, I/O @ 0x0000dc00/8, BIOS @ 0x????????/131072
[ 30.169] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.169] (II) LoadModule: "glx"
[ 30.171] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 30.189] (II) Module glx: vendor="X.Org Foundation"
[ 30.189] compiled for 1.20.14, module version = 1.0.0
[ 30.189] ABI class: X.Org Server Extension, version 10.0
[ 30.189] (==) Matched intel as autoconfigured driver 0
[ 30.189] (==) Matched modesetting as autoconfigured driver 1
[ 30.189] (==) Matched fbdev as autoconfigured driver 2
[ 30.189] (==) Matched vesa as autoconfigured driver 3
[ 30.189] (==) Assigned the driver to the xf86ConfigLayout
[ 30.189] (II) LoadModule: "intel"
[ 30.191] (WW) Warning, couldn't open module intel
[ 30.191] (EE) Failed to load module "intel" (module does not exist, 0)
[ 30.191] (II) LoadModule: "modesetting"
[ 30.191] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 30.205] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.206] compiled for 1.20.14, module version = 1.20.14
[ 30.206] Module class: X.Org Video Driver
[ 30.206] ABI class: X.Org Video Driver, version 24.1
[ 30.206] (II) LoadModule: "fbdev"
[ 30.206] (WW) Warning, couldn't open module fbdev
[ 30.207] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 30.207] (II) LoadModule: "vesa"
[ 30.207] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 30.212] (II) Module vesa: vendor="X.Org Foundation"
[ 30.212] compiled for 1.20.10, module version = 2.5.0
[ 30.212] Module class: X.Org Video Driver
[ 30.212] ABI class: X.Org Video Driver, version 24.1
[ 30.212] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.212] (II) VESA: driver for VESA chipsets: vesa
[ 30.212] (++) using VT number 1
[ 30.229] (II) modeset(0): using drv /dev/dri/card0
[ 30.229] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.229] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 30.230] (==) modeset(0): RGB weight 888
[ 30.230] (==) modeset(0): Default visual is TrueColor
[ 30.230] (II) Loading sub module "glamoregl"
[ 30.230] (II) LoadModule: "glamoregl"
[ 30.230] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 30.252] (II) Module glamoregl: vendor="X.Org Foundation"
[ 30.252] compiled for 1.20.14, module version = 1.0.1
[ 30.252] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.535] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) 945G
[ 30.535] (II) modeset(0): glamor initialized
[ 30.561] (II) modeset(0): Output VGA-1 has no monitor section
[ 30.577] (II) modeset(0): EDID for output VGA-1
[ 30.577] (II) modeset(0): Manufacturer: MED Model: 78b Serial#: 25124
[ 30.577] (II) modeset(0): Year: 2004 Week: 39
[ 30.577] (II) modeset(0): EDID Version: 1.3
[ 30.577] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 30.577] (II) modeset(0): Sync: Separate Composite SyncOnGreen
[ 30.577] (II) modeset(0): Max Image Size [cm]: horiz.: 33 vert.: 27
[ 30.577] (II) modeset(0): Gamma: 2.20
[ 30.577] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 30.577] (II) modeset(0): First detailed timing is preferred mode
[ 30.577] (II) modeset(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 30.577] (II) modeset(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 30.577] (II) modeset(0): Supported established timings:
[ 30.577] (II) modeset(0): 720x400@70Hz
[ 30.577] (II) modeset(0): 640x480@60Hz
[ 30.577] (II) modeset(0): 640x480@67Hz
[ 30.577] (II) modeset(0): 640x480@72Hz
[ 30.577] (II) modeset(0): 640x480@75Hz
[ 30.577] (II) modeset(0): 800x600@56Hz
[ 30.577] (II) modeset(0): 800x600@60Hz
[ 30.577] (II) modeset(0): 800x600@72Hz
[ 30.577] (II) modeset(0): 800x600@75Hz
[ 30.577] (II) modeset(0): 832x624@75Hz
[ 30.577] (II) modeset(0): 1024x768@60Hz
[ 30.577] (II) modeset(0): 1024x768@70Hz
[ 30.578] (II) modeset(0): 1024x768@75Hz
[ 30.578] (II) modeset(0): 1280x1024@75Hz
[ 30.578] (II) modeset(0): 1152x864@75Hz
[ 30.578] (II) modeset(0): Manufacturer's mask: 0
[ 30.578] (II) modeset(0): Supported standard timings:
[ 30.578] (II) modeset(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 30.578] (II) modeset(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 30.578] (II) modeset(0): Supported detailed timing:
[ 30.578] (II) modeset(0): clock: 108.0 MHz Image Size: 330 x 270 mm
[ 30.578] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 30.578] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 30.578] (II) modeset(0): Serial No: 000000000000
[ 30.578] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 30.578] (II) modeset(0): Monitor name: MD41077EA
[ 30.578] (II) modeset(0): EDID (in hex):
[ 30.578] (II) modeset(0): 00ffffffffffff0034a48b0724620000
[ 30.578] (II) modeset(0): 270e01036e211b78ea2ee5a4574a9c25
[ 30.578] (II) modeset(0): 115054bfef808140714f010101010101
[ 30.578] (II) modeset(0): 010101010101302a009851002a403070
[ 30.578] (II) modeset(0): 13004a0e1100001e000000ff00303030
[ 30.578] (II) modeset(0): 3030303030303030300a000000fd0038
[ 30.578] (II) modeset(0): 4b1f500e000a202020202020000000fc
[ 30.578] (II) modeset(0): 004d44343130373745410a20202000d1
[ 30.578] (II) modeset(0): Printing probed modes for output VGA-1
[ 30.578] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 30.578] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.578] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 30.578] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30.578] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 30.578] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30.578] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.578] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 30.578] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30.578] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.578] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.578] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30.578] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.578] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 30.578] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 30.578] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.578] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.578] (II) modeset(0): Output VGA-1 connected
[ 30.578] (II) modeset(0): Using exact sizes for initial modes
[ 30.578] (II) modeset(0): Output VGA-1 using initial mode 1280x1024 +0+0
[ 30.578] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.578] (==) modeset(0): DPI set to (96, 96)
[ 30.578] (II) Loading sub module "fb"
[ 30.578] (II) LoadModule: "fb"
[ 30.579] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 30.585] (II) Module fb: vendor="X.Org Foundation"
[ 30.585] compiled for 1.20.14, module version = 1.0.0
[ 30.585] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.585] (II) UnloadModule: "vesa"
[ 30.585] (II) Unloading vesa
[ 30.586] Require OpenGL version 2.1 or later.
[ 30.586] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[ 30.586] (EE)
Fatal server error:
[ 30.586] (EE) AddScreen/ScreenInit failed for driver 0
[ 30.586] (EE)
[ 30.586] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 30.586] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 30.586] (EE)
[ 30.602] (EE) Server terminated with error (1). Closing log file.
Code: Select all
(EE) Failed to load module "intel" (module does not exist, 0)How to start PorteuX 0.5 in grafic mode in this PC from the live USB?
