Porteus

M. Eerie wrote: ↑

23 Jan 2024, 07:46

AMD Renoir [Radeon RX Vega 6 ]

hmm, i have an AMD Rembrandt [Radeon 680m] (also using amdgpu) that works ok with the 6.6.12 kernel.. and my nvidia desktop box..

Jack wrote: ↑

23 Jan 2024, 05:12

I try to boot all menu. Just don't bootup.

any boot option you try should include the from= cheatcode, right? so for sdb1, that would be from=/dev/sdb1
even better is to use the UUID, which you should be able to get using blkid .. so: from=UUID:sTrIngOfnUmbers

Can you share the config used to build the kernel?

M. Eerie wrote: ↑

23 Jan 2024, 08:52

Can you share the config used to build the kernel?

here you go: 64bit.config
it's just the "PROTO" config used by neko's kernel builder..

I have Nemesis Cinnamon up and running. I took my Mate and my Cinnamon USB. I took both USB and look at permissons I look at one that work then the one didn't work and change permisson. Now it boots and seem work.

Nemesis-v24.01-XFCE-x86_64.iso
No Wifi for Network device [0280] Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
• Kernel Driver bcma-pci-bridge
How to fix it?
Thanks

Otto wrote: ↑

28 Jan 2024, 02:06

Nemesis-v24.01-XFCE-x86_64.iso
No Wifi for Network device [0280] Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
• Kernel Driver bcma-pci-bridge
How to fix it?
Thanks

(moved your post for better visibility)
according to this post: Nemesis 2023 (Post by Porcino #94697)

Porcino wrote: ↑

30 Jun 2023, 19:10

Solution was easy, with the crippled sources module, install with pacman 'broadcom-wl-dkms' and save changes to a module

might also work for you.. make sure you running without saved changes to do it and probly need to activate the 05-devel module too ( '# get-devel' command should fetch it for you)

Im sorry I cant install.
Let me explain my problem:
boot from CD under virtualbox, then use installer, flag both, turn off machine, get out cd.
Using vanilla porteus no problems.
Using nemesis it says no operating system. For sake of completeness, I start graphical with changes, if that matters.

I really need the arch based because its easier to build packages and find the programs I need.

gaspro wrote: ↑

25 Feb 2024, 09:51

Im sorry I cant install.
Let me explain my problem:
boot from CD under virtualbox, then use installer, flag both, turn off machine, get out cd.
Using vanilla porteus no problems.
Using nemesis it says no operating system. For sake of completeness, I start graphical with changes, if that matters.

so assuming you are installing to a virtual disk in virtualbox, i think i can reproduce this.
i my case after installing, shutting down and ejecting cd/iso, i can reboot the virtual HD install first time ok, but then shutting down, booting the second time, it fails as you describe.
my guess is that the (lack of proper) shutdown procedure is corrupting the virtual HD or it's MBR at least. (probably due to improper dismounting of the drive, and maybe that vdi s are particularly sensitive to this)
i think this because, if (after reformatting and reinstalling) i booted using copy2ram cheatcode and it seemed to be ok, rebooting(multiple) no problem.
if this works for you, the good news is that copy2ram cheatcode works with changes= (be sure to hit tab at the boot menu to edit it the first time you boot after installation, then edit /boot/syslinux/porteus.cfg after you've booted.
but if you couldn't even boot the first time after installation, that i couldn't reproduce.

I builded kernel 6.8.4 for Nemesis
Link for download https://www.mediafire.com/file/w63gcsvr ... l6.8.4.tar