2019 Updated Nemesis Base Modules

Arch based Porteus community project
neko
DEV Team
DEV Team
Posts: 1440
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

2018 Updated Nemesis Base Modules

Post#46 by neko » 15 Sep 2018, 03:57

Nemesis 20180914 with kernel 4.19-rc3

nemesis-xfce-18.09.14-x86_64.iso (380 M)
http://www.mediafire.com/file/p4tar03c7 ... x86_64.iso
md5sum: 7c4dd49502fd3e76d17444b7707c72eb nemesis-xfce-18.09.14-x86_64.iso

1. ISO Base was built with the skeleton & modules
were gotten from 2018 Updated Nemesis Base Modules (Post by ncmprhnsbl #61949)

2. boot/syslinux/vmlinuz and porteus/base/000-kernel.xzm
were replaced with "kernel 4.19-rc3".

Please refer to Porteus Kernel Builder (Post by neko #66489)

3. Additional modules
[nemesis-xfce-18.09.14-x86_64.iso@porteus/modules/004-google-chrome-69.0.3497.92-1-x86_64-1DUOWif.xzm]
004-google-chrome-69.0.3497.92-1-x86_64-1DUOWif.xzm was created by "mkgoogle-chrome" command.

[nemesis-xfce-18.09.14-x86_64.iso@porteus/modules/libxss-1.2.3-x86_64-1.xzm]
libxss-1.2.3-x86_64-1.xzm includes the google-chrome dependency libraries (libXss.so libXss.so.1 libXss.so.1.0.0).

Note:
libxss-1.2.3-x86_64-1 was obtained by APorteus tool, not pacman.
Therefor this libxss-1.2.3-x86_64-1 is out of the control of pacman.
If pacman will be used, delete (deactivate) this libxss-1.2.3-x86_64-1 and obtain one by packman.


[nemesis-xfce-18.09.14-x86_64.iso@porteus/optional/06-crippled_sources-4.19-rc3-64bit.xzm]
Kernel header (crippled_sources) for ISO installation into virtual environment is included in ISO.


[nemesis-xfce-18.09.14-x86_64.iso@porteus/optional/xfce-root-home.xzm]
Cheatcode "login=root" is not implemented in "nemesis".
If you need to boot nemesis on "root" user, please add cheatcode "load=root".

Note:
If booting "root" user mode, google-chrome cannot be executed directly.
[3123:3123:0915/200848.861226:ERROR:zygote_host_impl_linux.cc(89)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180.



Thanks.

User avatar
francois
Contributor
Contributor
Posts: 5640
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

2018 Updated Nemesis Base Modules

Post#47 by francois » 20 Sep 2018, 00:21

Thanks for the update neko. :)
Prendre son temps, profiter de celui qui passe.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 1961
Joined: 20 Mar 2012, 03:42
Distribution: 4.0-64bit all-DE+more
Location: australia
Contact:

2018 Updated Nemesis Base Modules

Post#48 by ncmprhnsbl » 14 Oct 2018, 09:04

base modules updated 2018-10-14 (see first post)
core:

Code: Select all

audit (new networkmanager dep)
archlinux-keyring
artix-keyring
curl
dconf
dmidecode
dnssec-anchors
elfutils
eudev
fuse-common
gdbm
glib-networking
glib2
gnutls
gpgme
gpm
iana-etc
iptables
iptables-openrc
libelf
libeudev
libidn
libinput
libndp
libnghttp2
libnm
libnm-glib
libsoup
libteam
libwacom
libx11
libxcb
libxml2
lynx
lz4
nano
ncurses
networkmanager
ntfs-3g
ntp
openssl
opensysusers
opensysusers-openrc
patch
pcre2
psmisc
sqlite
sudo
syslog-ng
unrar
gui:

Code: Select all

atk
cairo
fontconfig
gdk-pixbuf2
gtk-update-icon-cache
hwinfo
libdrm
libepoxy
libpng
librsvg
libthai
llvm-libs
mesa
vte-common
xf86-video-amdgpu
xf86-video-ati
xterm
xtra:

Code: Select all

at-spi2-atk
at-spi2-core
ffmpeg
libpulse
libssh
libva
x265
xclip
xfce4:

Code: Select all

gtk3
gvfs
json-glib
libblockdev
libbytesize
libnma (new nm-connection-editor dep)
network-manager-applet
nm-connection-editor
thunar
udisks2
vte3

fixed icons for modules in thunar
fixed extra entries in thunar-root devices
thunar guest device management not working properly(root is okay)
Forum Rules : https://forum.porteus.org/viewtopic.php?f=35&t=44

neko
DEV Team
DEV Team
Posts: 1440
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

2018 Updated Nemesis Base Modules

Post#49 by neko » 15 Oct 2018, 04:39

Nemesis 20181014 with kernel 4.19-rc7

nemesis-xfce-18.10.14-x86_64.iso (382 M)
http://www.mediafire.com/file/aopo7dk3e ... x86_64.iso
md5sum: 06612d2b9a7deea7c6e6e4222f8cc70f nemesis-xfce-18.10.14-x86_64.iso

1. ISO Base was built with the skeleton & modules
were gotten from 2018 Updated Nemesis Base Modules (Post by ncmprhnsbl #61949)

2. boot/syslinux/vmlinuz and porteus/base/000-kernel.xzm
were replaced with "kernel 4.19-rc7".

Please refer to Porteus Kernel Builder (Post by neko #66835)

3. Additional modules
[nemesis-xfce-18.10.14-x86_64.iso@porteus/modules/004-google-chrome-69.0.3497.100-1-x86_64-1DUOWif.xzm]
004-google-chrome-69.0.3497.100-1-x86_64-1DUOWif.xzm was created by "mkgoogle-chrome" command.

[nemesis-xfce-18.10.14-x86_64.iso@porteus/modules/libxss-1.2.3-x86_64-1.xzm]
libxss-1.2.3-x86_64-1.xzm includes the google-chrome dependency libraries (libXss.so libXss.so.1 libXss.so.1.0.0).

Note:
libxss-1.2.3-x86_64-1 was obtained by APorteus tool, not pacman.
Therefor this libxss-1.2.3-x86_64-1 is out of the control of pacman.
If pacman will be used, delete (deactivate) this libxss-1.2.3-x86_64-1 and obtain one by packman.


[nemesis-xfce-18.10.14-x86_64.iso@porteus/optional/06-crippled_sources-4.19-rc7-64bit.xzm]
Kernel header (crippled_sources) for ISO installation into virtual environment is included in ISO.


[nemesis-xfce-18.10.14-x86_64.iso@porteus/optional/xfce-root-home.xzm]
Cheatcode "login=root" is not implemented in "nemesis".
If you need to boot nemesis on "root" user, please add cheatcode "load=root".

[nemesis-xfce-18.10.14-x86_64.iso@porteus/optional/chrome-root.xzm]
Booting with cheatcode "load=root", this module too will be activated.
If booting "root" user mode, google-chrome cannot be executed.
[3123:3123:0915/200848.861226:ERROR:zygote_host_impl_linux.cc(89)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180.
chrome-root.xzm includes the patch that executes google-chrome with "--no-sandbox".


[nemesis-xfce-18.10.14-x86_64.iso@porteus/optional/001-livaWIFI.xzm]
Patch for Wifi LAN Card "Broadcom BCM43241". <for LIVA PC (LIVA-C0-2G-32G) wifi interface>



Thanks.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 1961
Joined: 20 Mar 2012, 03:42
Distribution: 4.0-64bit all-DE+more
Location: australia
Contact:

2018 Updated Nemesis Base Modules

Post#50 by ncmprhnsbl » 17 Nov 2018, 22:30

base modules updated 2018-11-17 (see first post)
core:

Code: Select all

archlinux-keyring
archlinux-mirrorlist
artix-mirrorlist
ca-certificates
ca-certificates-mozilla
ca-certificates-utils
cpio
cracklib
curl
dconf
device-mapper
dialog
diffutils
dosfstools
elogind
file
findutils
gdbm
gettext
glib2
glibc
gmp
gnupg
grep
gzip
hdparm
icu
inetutils
inxi
iproute2
iptables
ipw2100-fw
ipw2200-fw
kbd
libcap
libelogind
libevdev
libffi
libgcrypt
libinput
libmnl
libnghttp2
libnm
libnm-glib
libsoup
libssh2
libutil-linux
libxml2
lzo
mdadm
nano
networkmanager
nss
openrc
openresolv
openssh
opentmpfiles
opentmpfiles-openrc
parted
patch
perl-error
pkcs11-helper
popt
ppp
sdparm
sqlite
squashfs-tools
tar
texinfo
tzdata
unzip
util-linux
which
xfsprogs
zstd
gui:

Code: Select all

cairo
giflib
harfbuzz
libcroco
libcups
libdrm
librsvg
libsm
libunwind
libxi
libxpm
libxrender
libxtst
libxv
libxvmc
mesa
pixman
startup-notification
upower
vte-common
xf86-input-keyboard
xf86-input-libinput
xf86-input-vmmouse
xf86-input-void
xf86-video-intel
xkeyboard-config
xorg-fonts-misc
xorg-server
xorg-server-common
xorg-sessreg
xorg-xauth
xorg-xrandr
xtra:

Code: Select all

a52dec
aalib
alsa-lib
alsa-utils
ffmpeg
flac
libasyncns
libev
libevent
libmodplug
libraw1394
libsamplerate
libsndfile
libssh
opencore-amr
opus
recode
sdl
sdl2
speex
usbmuxd
v4l-utils
xfce4:

Code: Select all

btrfs-progs
cryptsetup
exo
garcon
gconf
iso-codes
libaio
libnma
libnotify
libxfce4ui
lvm2
mobile-broadband-provider-info
network-manager-applet
nm-connection-editor
thunar-volman
vte3
xfce4-appfinder
notes:
thunar guest device mounting still not working

the devel module is getting quite old, i'll try to update it next time :) (and match it with a newer kernel..)

have made an attempt at a runit version, haven't quite cracked it yet..
Forum Rules : https://forum.porteus.org/viewtopic.php?f=35&t=44

neko
DEV Team
DEV Team
Posts: 1440
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

2018 Updated Nemesis Base Modules

Post#51 by neko » 19 Nov 2018, 01:50

Nemesis 2018-11-17 with kernel 4.20-rc2

nemesis-xfce-18.11.17-x86_64.iso (387 M)
http://www.mediafire.com/file/om0qn7l7a ... x86_64.iso
md5sum: 6e9c147fd3e460b65cc78848d309529d nemesis-xfce-18.11.17-x86_64.iso

1. ISO Base was built with the skeleton & modules
were gotten from 2018 Updated Nemesis Base Modules (Post by ncmprhnsbl #61949)

2. boot/syslinux/vmlinuz and porteus/base/000-kernel.xzm
were replaced with "kernel 4.20-rc2".

Please refer to Porteus Kernel Builder (Post by neko #66835)

3. Additional modules
[ISO@porteus/modules/004-google-chrome-70.0.3538.102-1-x86_64-1DUOWif.xzm]
004-google-chrome-70.0.3538.102-1-x86_64-1DUOWif.xzm was created by "mkgoogle-chrome" command.

[ISO@porteus/modules/libxss-1.2.3-x86_64-1.xzm]
libxss-1.2.3-x86_64-1.xzm includes the google-chrome dependency libraries (libXss.so libXss.so.1 libXss.so.1.0.0).

Note:
libxss-1.2.3-x86_64-1 was obtained by APorteus tool, not pacman.
Therefor this libxss-1.2.3-x86_64-1 is out of the control of pacman.
If pacman will be used, delete (deactivate) this libxss-1.2.3-x86_64-1 and obtain one by packman.


[ISO@porteus/optional/06-crippled_sources-4.20-rc2-64bit.xzm]
Kernel header (crippled_sources) for ISO installation into virtual environment is included in ISO.


[ISO@porteus/optional/xfce-root-home.xzm]
Cheatcode "login=root" is not implemented in "nemesis".
If you need to boot nemesis on "root" user, please add cheatcode "load=root".

[ISO@porteus/optional/chrome-root.xzm]
Booting with cheatcode "load=root", this module too will be activated.
If booting "root" user mode, google-chrome cannot be executed.
[3123:3123:0915/200848.861226:ERROR:zygote_host_impl_linux.cc(89)] Running as root without --no-sandbox is not supported.
chrome-root.xzm includes the patch that executes google-chrome with "--no-sandbox".


[ISO@porteus/optional/001-livaWIFI.xzm]
Patch for Wifi LAN Card "Broadcom BCM43241". <for LIVA PC (LIVA-C0-2G-32G) wifi interface>


Note:
"X start" is very slow in my environment.


Thanks.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 1961
Joined: 20 Mar 2012, 03:42
Distribution: 4.0-64bit all-DE+more
Location: australia
Contact:

Re: 2018 Updated Nemesis Base Modules

Post#52 by ncmprhnsbl » 17 Dec 2018, 23:18

updated 2018-12-17 see links in first post
packages updated/changes
updated kernel to 4.19.8
core:

Code: Select all

acpid
archlinux-keyring
ca-certificates-mozilla
curl
device-mapper
elfutils
elogind
elogind-openrc
eudev
fuse-common
gcc-libs
gnutls
hdparm
hwids
iptables
jansson
keyutils
libatomic_ops
libcap
libelf
libelogind
libeudev
libgpg-error
libteam
libwacom
lm_sensors
logrotate
nettle
nss
openssl
openssl-1.0
opentmpfiles
opentmpfiles-openrc
pciutils
perl
sqlite
squashfs-tools
sudo
syslog-ng
tcl
xfsprogs
zeromq

added: (iptables deps)
libnetfilter_conntrack
libnfnetlink
gui:

Code: Select all

gtk-update-icon-cache
harfbuzz
libcups
libjpeg-turbo
librsvg
libtiff
llvm-libs
mesa
pixman
vte-common
xtra:

Code: Select all

alsa-lib
libimobiledevice
libusbmuxd
libva-intel-driver
libwbclient
libwebp
usbmuxd
v4l-utils
xfce4:

Code: Select all

cryptsetup
garcon
gtk3
lvm2
thunar-volman
tumbler
vte3
wayland-protocols
i'll try to do an updated devel soon..
Forum Rules : https://forum.porteus.org/viewtopic.php?f=35&t=44

neko
DEV Team
DEV Team
Posts: 1440
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

Re: 2018 Updated Nemesis Base Modules

Post#53 by neko » 19 Dec 2018, 08:40

Nemesis 2018-12-17 with kernel 4.20-rc7

nemesis-xfce-18.12.17-x86_64.iso (390 M)
http://www.mediafire.com/file/mnmib7as8 ... x86_64.iso
md5sum: 72e35b20f27cd06633fdba6f31c276a5 nemesis-xfce-18.12.17-x86_64.iso


1. ISO Base was built with the skeleton & modules
were gotten from 2018 Updated Nemesis Base Modules (Post by ncmprhnsbl #61949)

2. boot/syslinux/vmlinuz and porteus/base/000-kernel.xzm
were replaced with "kernel 4.20-rc7".

Please refer to Porteus Kernel Builder (Post by neko #52232)

3. Additional modules
[ISO@porteus/modules/004-google-chrome-71.0.3578.98-1-x86_64-1DUOWif.xzm]
004-google-chrome-71.0.3578.98-1-x86_64-1DUOWif.xzm was created by "mkgoogle-chrome" command.

[ISO@porteus/modules/libxss-1.2.3-x86_64-1.xzm]
libxss-1.2.3-x86_64-1.xzm includes the google-chrome dependency libraries (libXss.so libXss.so.1 libXss.so.1.0.0).

Note:
libxss-1.2.3-x86_64-1 was obtained by APorteus tool, not pacman.
Therefor this libxss-1.2.3-x86_64-1 is out of the control of pacman.
If pacman will be used, delete (deactivate) this libxss-1.2.3-x86_64-1 and obtain one by packman.

[ISO@porteus/optional/06-crippled_sources-4.20-rc7-64bit.xzm]
Kernel header (crippled_sources) for ISO installation into virtual environment is included in ISO.

[ISO@porteus/optional/xfce-root-home.xzm]
Cheatcode "login=root" is not implemented in "nemesis".
If you need to boot nemesis on "root" user, please add cheatcode "load=root".

[ISO@porteus/optional/chrome-root.xzm]
Booting with cheatcode "load=root", this module too will be activated.
If booting "root" user mode, google-chrome cannot be executed.
[4306:4306:1219/230216.381171:ERROR:zygote_host_impl_linux.cc(89)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180.
chrome-root.xzm includes the patch that executes google-chrome with "--no-sandbox".

[ISO@porteus/optional/001-livaWIFI.xzm]
Patch for Wifi LAN Card "Broadcom BCM43241". <for LIVA PC (LIVA-C0-2G-32G) wifi interface>


Note:
"X start" is very slow in my environment.


Thanks.

User avatar
Rava
Contributor
Contributor
Posts: 2153
Joined: 11 Jan 2011, 02:46
Distribution: Porteus 4.0 x86-64 XFCe
Location: Forests of Germany

Re: 2018 Updated Nemesis Base Modules

Post#54 by Rava » 20 Dec 2018, 03:07

neko wrote:
19 Dec 2018, 08:40
Nemesis 2018-12-17 with kernel 4.20-rc7
I presume you will create a version when 4.20 got finalized?
neko wrote:
19 Dec 2018, 08:40
nemesis-xfce-18.12.17-x86_64.iso (390 M)
http://www.mediafire.com/file/mnmib7as8 ... x86_64.iso
md5sum: 72e35b20f27cd06633fdba6f31c276a5 nemesis-xfce-18.12.17-x86_64.iso
Nice. Downloading right now.
neko wrote:
19 Dec 2018, 08:40
[ISO@porteus/modules/004-google-chrome-71.0.3578.98-1-x86_64-1DUOWif.xzm]
Would a module created by update-[browser] created by Port 4.x or 5.x work as alternative browser as well? E.g. update-firefox or update-porteus?

Or does nemesis has its own update-* scripts that differ from the Port ones?
Cheers!
Yours Rava

User avatar
francois
Contributor
Contributor
Posts: 5640
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: 2018 Updated Nemesis Base Modules

Post#55 by francois » 20 Dec 2018, 18:29

Nemesis is a incomplete porteus base with archlinux package manager. You can try using the modules you have created under porteus slackware. On my nemesis (arch linux) installation porteus modules palemoon and libreoffice work. But okular will not, because of missing libraries.

update-* will not work under nemesis. Just test it under cli mode.
Prendre son temps, profiter de celui qui passe.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 1961
Joined: 20 Mar 2012, 03:42
Distribution: 4.0-64bit all-DE+more
Location: australia
Contact:

Re: 2018 Updated Nemesis Base Modules

Post#56 by ncmprhnsbl » 21 Dec 2018, 01:43

also remember that arch/artix has well stocked repos
eg. pman -S firefox will get you a firefox module
(probly run setup-pman first)
and with devel module activated:
pman -S palemoon-bin will make a module via AUR (although if you use a palemoon module from slackware porteus it works fine -- it's essentially the same prebuilt binary..)

look in /usr/local/bin and usr/local/sbin to see what scripts nemesis has..
Forum Rules : https://forum.porteus.org/viewtopic.php?f=35&t=44

beny
Full of knowledge
Full of knowledge
Posts: 778
Joined: 02 Jan 2011, 11:33
Location: italy

Re: 2018 Updated Nemesis Base Modules

Post#57 by beny » 21 Dec 2018, 20:12

thanks ncmprhnsbl and neko for this release,well the pman work very well, and you have a lot of software ready to use, francois, okular is part of kde so you have to use a gtk pdf reader,or you have a plasma nemesys....

User avatar
Rava
Contributor
Contributor
Posts: 2153
Joined: 11 Jan 2011, 02:46
Distribution: Porteus 4.0 x86-64 XFCe
Location: Forests of Germany

Re: 2018 Updated Nemesis Base Modules

Post#58 by Rava » 21 Dec 2018, 20:57

beny wrote:
21 Dec 2018, 20:12
thanks ncmprhnsbl and neko for this release,well the pman work very well, and you have a lot of software ready to use, francois, okular is part of kde so you have to use a gtk pdf reader,or you have a plasma nemesys....
Just saying, I prefer the name nemesys. Has a better ring than "Nemesis" :D
Cheers!
Yours Rava

Jack
Contributor
Contributor
Posts: 1547
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 4.0rc4 My Mate 64 bit
Location: USA

Re: 2018 Updated Nemesis Base Modules

Post#59 by Jack » 22 Dec 2018, 01:51

Good job ncmprhnsbl and I like the name Nemesis. The only thing on my old Laptop it boot slow.

ncmprhnsbl have a good Christmas and good New Year.

Thanks
Jack
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

neko
DEV Team
DEV Team
Posts: 1440
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

Re: 2018 Updated Nemesis Base Modules

Post#60 by neko » 22 Dec 2018, 13:03

@Rava
I will update the kernel of Nemesis when 4.20 got finalized.
If I forget, please tell me.
(Sometimes I forget something to do because stupid old head)

Thanks.

Post Reply