need download of Porteus-Kiosk-3.6.0-i486.iso

'User made' tutorials related to Porteus Kiosk edition.
Official kiosk documentation can be find here: http://porteus-kiosk.org/documentation.html
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
lyle
Ronin
Ronin
Posts: 3
Joined: 18 Jun 2018, 21:39
Distribution: 3.7.0

need download of Porteus-Kiosk-3.6.0-i486.iso

Post#1 by lyle » 18 Jun 2018, 22:48

I'm trying to build a Porteus Kiosk on an HP t5630 Thin Client, which is a pathetically old box with 1GB memory and clearly 32bits. Just want to boot off a usb stick into Firefox and display a web page.

I did this on the Thin Client as a test a year ago, and it worked. But did I write anything down?....no :(

I just built 3.7.0 on an old Dell laptop, generated a USB stick, and could boot that just fine.
Trying the same process on the HP Thin Client now just hangs. I get a quick Porteus one-line banner, some good looking access to the memory stick, but then it hangs with a blank screen and some slow repetitive usb access.
Trying to boot the stick I generated on the Dell laptop gives me about the same behavior.

I know this worked about a year ago, so I'm hoping it will work with a 3.6.0 32bit distro.

Can anyone tell me where I can still find a Porteus-Kiosk-3.6.0-i486.iso ? Or if you have any other suggestions, that would be great.

Thanks....Lyle

lyle
Ronin
Ronin
Posts: 3
Joined: 18 Jun 2018, 21:39
Distribution: 3.7.0

need download of Porteus-Kiosk-3.6.0-i486.iso

Post#2 by lyle » 19 Jun 2018, 19:45

Well, now I'm thinking that the current 3.7.0 distribution is not my problem.
I found the usb stick I used to generate my test a year ago, and it's 3.7.0

I'm wondering if my problem isn't 32bit vs 64bit.

If I run 3.7.0 off a usb stick on my Dell laptop which has an i7 processor, do the wizard config and generate a second usb stick for the kiosk,
should I be able to plug that into the HP Thin Client which has a "VIA Eden 1Ghz" (VIA VX800 north/south bridge unified chip) processor?

Or do I have to run the Wizard on the target system? (doesn't help much, because I can't boot the 3.7.0 usb stick on the HP Thin Client).

I swear this all worked a year ago.

Thanks....Lyle

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

need download of Porteus-Kiosk-3.6.0-i486.iso

Post#3 by Ed_P » 19 Jun 2018, 20:34

Normally 32bit systems run on 64bit hardware. 64bit systems will not run on 32bit hardware.

Hardware/software booting problems usually revolve around video drivers, USB drivers and hard drive drivers.
Ed

lyle
Ronin
Ronin
Posts: 3
Joined: 18 Jun 2018, 21:39
Distribution: 3.7.0

need download of Porteus-Kiosk-3.6.0-i486.iso

Post#4 by lyle » 19 Jun 2018, 20:58

I got it: had to disable UEFI and then it worked.....Lyle

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

need download of Porteus-Kiosk-3.6.0-i486.iso

Post#5 by Ed_P » 19 Jun 2018, 23:58

32bit with EFI!! Wasn't expecting that. Good that you got it figured out. :)
Ed

Locked