Hi
I need to discover a way to add a driver to the porteus kiosk system, can someone point me at some documentation at all ?
All suggetions and comments welcome, thanks for your contributions
Adding a driver
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
-
- White ninja
- Posts: 4
- Joined: 08 Nov 2017, 03:44
- Distribution: portues kiosk
- fanthom
- Moderator Team
- Posts: 5666
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Adding a driver
Is it printer driver? Then here:
http://porteus-kiosk.org/faq.html#14
Documentation is on the kiosk webpage:
http://porteus-kiosk.org/documentation.html
http://porteus-kiosk.org/faq.html#14
Documentation is on the kiosk webpage:
http://porteus-kiosk.org/documentation.html
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 4
- Joined: 08 Nov 2017, 03:44
- Distribution: portues kiosk
Adding a driver
Hi fanthom,
I have a HP 300-1000 Touchscreen all in one pc.
Porteus Kiosk does not recognise the touchscreen.
NextWindow controller:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1926 ProdID=0006 Rev=00.01
S: Manufacturer=NextWindow
S: Product=Touchscreen
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I'm currently searching google for any info on drivers. I've found a few leads in the following places.
http://www.fusionnetwork.us/index.php/a ... w-working/
https://launchpad.net/nwfermi/
https://wiki.ubuntu.com/Multitouch/HardwareSupport
I've had a look at the documentation, and think I need this : http://porteus-kiosk.org/kiosk-customization.html
I'll start experimenting and see if I can work this out
I have a HP 300-1000 Touchscreen all in one pc.
Porteus Kiosk does not recognise the touchscreen.
NextWindow controller:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1926 ProdID=0006 Rev=00.01
S: Manufacturer=NextWindow
S: Product=Touchscreen
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I'm currently searching google for any info on drivers. I've found a few leads in the following places.
http://www.fusionnetwork.us/index.php/a ... w-working/
https://launchpad.net/nwfermi/
https://wiki.ubuntu.com/Multitouch/HardwareSupport
I've had a look at the documentation, and think I need this : http://porteus-kiosk.org/kiosk-customization.html
I'll start experimenting and see if I can work this out
- fanthom
- Moderator Team
- Posts: 5666
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Adding a driver
You will have to recreate kiosk kernel sources and then compile NextWindow driver against them.
See here for similar case:
[Solved] WIFI-problems on some recent laptops?
It may be easier to use 'customized kiosk builds' service instead:
http://porteus-kiosk.org/builds.html
Thanks
See here for similar case:
[Solved] WIFI-problems on some recent laptops?
It may be easier to use 'customized kiosk builds' service instead:
http://porteus-kiosk.org/builds.html
Thanks
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 4
- Joined: 08 Nov 2017, 03:44
- Distribution: portues kiosk
Adding a driver
Ok, have followed http://porteus-kiosk.org/kiosk-customization.html so far (I figured out I'd have to do this on a standard linux system. Not something locked down like porteus kiosk. I ended up trying Porteus Desktop, assuming it would have everything I need in it.)
I've gotten as far as running the following commands
And then followed this guide http://porteus-kiosk.org/modules.html to unpack my 000-kernel.xzm file
I"ve emailed support and received the .config file.
I have some questions.
How do I "recreate kiosk kernel sources" ?
How do I "compile my driver against them" ?
Thansk.
I've gotten as far as running the following commands
Code: Select all
mkdir /tmp/kiosk_ISO
mount -o loop kiosk.iso /mnt/cdrom
cp -a /mnt/cdrom/* /tmp/kiosk_ISO
umount /mnt/cdrom
I"ve emailed support and received the .config file.
I have some questions.
How do I "recreate kiosk kernel sources" ?
How do I "compile my driver against them" ?
Thansk.