Porteus 5.0 RC2 bug reports

Please reproduce your error on a second machine before posting, and check the error by running without saved changes or extra modules (See FAQ No. 13, "How to report a bug"). For unstable Porteus versions (alpha, beta, rc) please use the relevant thread in our "Development" section.
Post Reply
roadie
Full of knowledge
Full of knowledge
Posts: 400
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 5.0-RC1
Location: In a hayfield

Porteus 5.0 RC2 bug reports

Post#16 by roadie » 10 Aug 2020, 05:23

rchase,

Try lspci -k.

Does it show a driver in use? Also run dmesg and look for errors. If it's a firmware problem it will possibly show up.
Top
User avatar
Ed_P
Contributor
Contributor
Posts: 8360
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Porteus 5.0 RC2 bug reports

Post#17 by Ed_P » 10 Aug 2020, 05:36

fulalas wrote: ↑
10 Aug 2020, 02:23
 @Ed_P, you can change this setting in Nemo: Edit > Preferences > Behavior > Executable text files
Thank you fulalas. :good:
Enabling the Executable Text Files' Ask each time option does what I am use to in Cinnamon. Maybe a default in older versions cause I don't remember changing the option?
Ed
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#18 by rchase » 10 Aug 2020, 05:49

No driver for the Ethernet controller. I don't see anything in dmesg:

Code: Select all

[    0.000000] Linux version 5.1.5-porteus (root@porteus.example.net) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun May 26 17:25:39 Local time zone must be set--
[    0.000000] Command line: from=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus changes=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus/porteus utc timezone=America/Denver ramsize=40% login=root cliexec=mount~/dev/sda2 initrd=/boot/syslinux/initrd.xz BOOT_IMAGE=/boot/syslinux/vmlinuz 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c64fbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c64fc000-0x00000000c6502fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c6503000-0x00000000c6945fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c6946000-0x00000000c6ed6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c6ed7000-0x00000000d8daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8db0000-0x00000000d8e45fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8e46000-0x00000000d8e96fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8e97000-0x00000000d8fc5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d8fc6000-0x00000000d9ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: MSI MS-7817/H81M-P33 (MS-7817), BIOS V1.9 03/30/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2999.801 MHz processor
[    0.001305] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001307] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001312] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.001315] MTRR default type: uncachable
[    0.001315] MTRR fixed ranges enabled:
[    0.001316]   00000-9FFFF write-back
[    0.001316]   A0000-BFFFF uncachable
[    0.001317]   C0000-CFFFF write-protect
[    0.001318]   D0000-E7FFF uncachable
[    0.001318]   E8000-FFFFF write-protect
[    0.001319] MTRR variable ranges enabled:
[    0.001320]   0 base 0000000000 mask 7F00000000 write-back
[    0.001320]   1 base 0100000000 mask 7FE0000000 write-back
[    0.001321]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001322]   3 base 00DC000000 mask 7FFC000000 uncachable
[    0.001322]   4 base 00DB000000 mask 7FFF000000 uncachable
[    0.001323]   5 base 011FE00000 mask 7FFFE00000 uncachable
[    0.001323]   6 disabled
[    0.001324]   7 disabled
[    0.001324]   8 disabled
[    0.001324]   9 disabled
[    0.002009] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002088] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[    0.002091] last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.007497] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[    0.007506] Using GB pages for direct mapping
[    0.007507] BRK [0x02601000, 0x02601fff] PGTABLE
[    0.007509] BRK [0x02602000, 0x02602fff] PGTABLE
[    0.007510] BRK [0x02603000, 0x02603fff] PGTABLE
[    0.007557] BRK [0x02604000, 0x02604fff] PGTABLE
[    0.007673] BRK [0x02605000, 0x02605fff] PGTABLE
[    0.007736] BRK [0x02606000, 0x02606fff] PGTABLE
[    0.008466] RAMDISK: [mem 0x7ff36000-0x7fffefff]
[    0.008471] ACPI: Early table checksum verification disabled
[    0.010143] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.010146] ACPI: XSDT 0x00000000D8F99080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010150] ACPI: FACP 0x00000000D8FA6668 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.010154] ACPI: DSDT 0x00000000D8F99190 00D4D2 (v02 ALASKA A M I    00000036 INTL 20120711)
[    0.010156] ACPI: FACS 0x00000000D8FC5F80 000040
[    0.010158] ACPI: APIC 0x00000000D8FA6778 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.010159] ACPI: FPDT 0x00000000D8FA67E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010161] ACPI: ASF! 0x00000000D8FA6828 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.010164] ACPI: SSDT 0x00000000D8FA68D0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.010166] ACPI: SSDT 0x00000000D8FA6E10 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.010168] ACPI: MCFG 0x00000000D8FA78E8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.010170] ACPI: HPET 0x00000000D8FA7928 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.010171] ACPI: SSDT 0x00000000D8FA7960 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.010173] ACPI: SSDT 0x00000000D8FA7CD0 003528 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.010175] ACPI: SSDT 0x00000000D8FAB1F8 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[    0.010181] ACPI: Local APIC address 0xfee00000
[    0.010212] No NUMA configuration found
[    0.010212] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.010215] NODE_DATA(0) allocated [mem 0x11fdf7000-0x11fdfafff]
[    0.010225] Zone ranges:
[    0.010226]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010227]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010227]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.010228] Movable zone start for each node
[    0.010229] Early memory node ranges
[    0.010230]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.010230]   node   0: [mem 0x0000000000100000-0x00000000c64fbfff]
[    0.010231]   node   0: [mem 0x00000000c6503000-0x00000000c6945fff]
[    0.010231]   node   0: [mem 0x00000000c6ed7000-0x00000000d8daffff]
[    0.010232]   node   0: [mem 0x00000000d8e46000-0x00000000d8e96fff]
[    0.010232]   node   0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[    0.010233]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.010627] Zeroed struct page in unavailable ranges: 30714 pages
[    0.010628] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.010630] On node 0 totalpages: 1017350
[    0.010630]   DMA zone: 64 pages used for memmap
[    0.010631]   DMA zone: 21 pages reserved
[    0.010631]   DMA zone: 3996 pages, LIFO batch:0
[    0.010704]   DMA32 zone: 13794 pages used for memmap
[    0.010705]   DMA32 zone: 882794 pages, LIFO batch:63
[    0.026905]   Normal zone: 2040 pages used for memmap
[    0.026906]   Normal zone: 130560 pages, LIFO batch:31
[    0.029146] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff]
[    0.029214] ACPI: PM-Timer IO Port: 0x1808
[    0.029215] ACPI: Local APIC address 0xfee00000
[    0.029220] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.029229] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.029230] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.029231] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.029232] ACPI: IRQ0 used by override.
[    0.029233] ACPI: IRQ9 used by override.
[    0.029235] Using ACPI (MADT) for SMP configuration information
[    0.029236] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.029239] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.029241] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.029246] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.029247] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.029248] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.029248] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.029249] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.029250] PM: Registered nosave memory: [mem 0xc64fc000-0xc6502fff]
[    0.029251] PM: Registered nosave memory: [mem 0xc6946000-0xc6ed6fff]
[    0.029251] PM: Registered nosave memory: [mem 0xd8db0000-0xd8e45fff]
[    0.029252] PM: Registered nosave memory: [mem 0xd8e97000-0xd8fc5fff]
[    0.029253] PM: Registered nosave memory: [mem 0xd8fc6000-0xd9ffefff]
[    0.029254] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[    0.029254] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[    0.029255] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.029255] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.029256] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.029256] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.029257] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.029257] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.029258] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.029258] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.029259] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.029259] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.029260] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.029260] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.029262] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.029264] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.081010] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.081279] percpu: Embedded 42 pages/cpu s133144 r8192 d30696 u1048576
[    0.081282] pcpu-alloc: s133144 r8192 d30696 u1048576 alloc=1*2097152
[    0.081283] pcpu-alloc: [0] 0 1 
[    0.081295] Built 1 zonelists, mobility grouping on.  Total pages: 1001431
[    0.081295] Policy zone: Normal
[    0.081297] Kernel command line: quiet from=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus changes=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus/porteus utc timezone=America/Denver ramsize=40% login=root cliexec=mount~/dev/sda2 initrd=/boot/syslinux/initrd.xz BOOT_IMAGE=/boot/syslinux/vmlinuz 
[    0.105677] Memory: 3914020K/4069400K available (10243K kernel code, 689K rwdata, 2372K rodata, 988K init, 2348K bss, 155380K reserved, 0K cma-reserved)
[    0.105748] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.105751] Kernel/User page tables isolation: enabled
[    0.105798] rcu: Preemptible hierarchical RCU implementation.
[    0.105799] rcu: 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.105800] 	Tasks RCU enabled.
[    0.105800] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.105801] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.105809] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[    0.109232] Console: colour VGA+ 80x25
[    0.109286] printk: console [tty0] enabled
[    0.109293] ACPI: Core revision 20190215
[    0.109451] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.109459] hpet clockevent registered
[    0.109464] APIC: Switch to symmetric I/O mode setup
[    0.109792] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.114464] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3d898733a, max_idle_ns: 440795259568 ns
[    0.114474] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.60 BogoMIPS (lpj=2999801)
[    0.114475] pid_max: default: 32768 minimum: 301
[    0.115367] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.115811] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.115830] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.115845] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.115958] *** VALIDATE proc ***
[    0.115977] *** VALIDATE cgroup1 ***
[    0.115978] *** VALIDATE cgroup2 ***
[    0.115999] mce: CPU supports 7 MCE banks
[    0.116006] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.116014] process: using mwait in idle threads
[    0.116017] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.116017] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.116019] Spectre V2 : Mitigation: Full generic retpoline
[    0.116020] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.116020] Speculative Store Bypass: Vulnerable
[    0.116028] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.116180] Freeing SMP alternatives memory: 20K
[    0.117464] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.122470] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.122496] ... version:                3
[    0.122497] ... bit width:              48
[    0.122497] ... generic registers:      8
[    0.122498] ... value mask:             0000ffffffffffff
[    0.122498] ... max period:             00007fffffffffff
[    0.122499] ... fixed-purpose events:   3
[    0.122499] ... event mask:             00000007000000ff
[    0.124466] rcu: Hierarchical SRCU implementation.
[    0.128466] smp: Bringing up secondary CPUs ...
[    0.136470] x86: Booting SMP configuration:
[    0.136471] .... node  #0, CPUs:      #1
[    0.136890] smp: Brought up 1 node, 2 CPUs
[    0.136890] smpboot: Max logical packages: 1
[    0.136890] smpboot: Total of 2 processors activated (11999.20 BogoMIPS)
[    0.137547] devtmpfs: initialized
[    0.137657] random: get_random_bytes called from setup_net+0x36/0x14c with crng_init=0
[    0.137657] PM: Registering ACPI NVS region [mem 0xc64fc000-0xc6502fff] (28672 bytes)
[    0.137657] PM: Registering ACPI NVS region [mem 0xd8e97000-0xd8fc5fff] (1241088 bytes)
[    0.137657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.137657] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.138488] pinctrl core: initialized pinctrl subsystem
[    0.138568] NET: Registered protocol family 16
[    0.139469] cpuidle: using governor ladder
[    0.140468] cpuidle: using governor menu
[    0.140559] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.140559] ACPI: bus type PCI registered
[    0.140561] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140600] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140602] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140607] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.140639] PCI: Using configuration type 1 for base access
[    0.140728] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.142201] ACPI: Added _OSI(Module Device)
[    0.142201] ACPI: Added _OSI(Processor Device)
[    0.142201] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.142201] ACPI: Added _OSI(Processor Aggregator Device)
[    0.142201] ACPI: Added _OSI(Linux-Dell-Video)
[    0.142201] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.142201] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.147915] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.149199] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.149729] ACPI: Dynamic OEM Table Load:
[    0.149732] ACPI: SSDT 0xFFFF88811AF9E400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.150015] ACPI: Dynamic OEM Table Load:
[    0.150019] ACPI: SSDT 0xFFFF88811A8E8800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.150308] ACPI: Dynamic OEM Table Load:
[    0.150311] ACPI: SSDT 0xFFFF88811AF8EE00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.150756] ACPI: Interpreter enabled
[    0.150772] ACPI: (supports S0 S3 S4 S5)
[    0.150773] ACPI: Using IOAPIC for interrupt routing
[    0.150789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.150977] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.156685] ACPI: Power Resource [FN00] (off)
[    0.156732] ACPI: Power Resource [FN01] (off)
[    0.156778] ACPI: Power Resource [FN02] (off)
[    0.156823] ACPI: Power Resource [FN03] (off)
[    0.156868] ACPI: Power Resource [FN04] (off)
[    0.157369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.157372] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.157529] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.157614] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.157615] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.157878] PCI host bridge to bus 0000:00
[    0.157880] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.157881] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.157882] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.157882] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.157883] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.157884] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.157885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.157886] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.157886] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.157887] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.157888] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.157894] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.157962] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[    0.157970] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.157975] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.157978] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.158053] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.158071] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.158124] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.158178] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.158198] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
[    0.158252] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.158313] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.158333] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
[    0.158407] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.158468] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.158486] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.158548] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.158603] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.158675] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.158763] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.158834] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.158921] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.158941] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
[    0.159016] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.159077] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.159219] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.159234] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.159240] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.159246] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.159252] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.159259] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.159265] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
[    0.159295] pci 0000:00:1f.2: PME# supported from D3hot
[    0.159346] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.159362] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
[    0.159379] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.159485] acpiphp: Slot [1] registered
[    0.159489] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.159550] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.159579] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.159606] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.159623] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.159721] pci 0000:02:00.0: supports D1 D2
[    0.159722] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159826] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.159829] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.159831] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.159835] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.160313] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.160345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160378] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.160409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.160441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160474] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160505] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.160536] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.160813] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.160813] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.160813] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.160813] vgaarb: loaded
[    0.160813] SCSI subsystem initialized
[    0.160813] libata version 3.00 loaded.
[    0.160813] ACPI: bus type USB registered
[    0.160813] usbcore: registered new interface driver usbfs
[    0.160813] usbcore: registered new interface driver hub
[    0.160813] usbcore: registered new device driver usb
[    0.160813] videodev: Linux video capture interface: v2.00
[    0.160813] pps_core: LinuxPPS API ver. 1 registered
[    0.160813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.160813] PTP clock support registered
[    0.160813] Advanced Linux Sound Architecture Driver Initialized.
[    0.160813] PCI: Using ACPI for IRQ routing
[    0.162285] PCI: pci_cache_line_size set to 64 bytes
[    0.162316] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.162317] e820: reserve RAM buffer [mem 0xc64fc000-0xc7ffffff]
[    0.162318] e820: reserve RAM buffer [mem 0xc6946000-0xc7ffffff]
[    0.162318] e820: reserve RAM buffer [mem 0xd8db0000-0xdbffffff]
[    0.162319] e820: reserve RAM buffer [mem 0xd8e97000-0xdbffffff]
[    0.162320] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.162321] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.162493] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.162496] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.164474] clocksource: Switched to clocksource tsc-early
[    0.164511] pnp: PnP ACPI init
[    0.164554] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.164558] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.164672] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.164674] system 00:01: [io  0xffff] has been reserved
[    0.164674] system 00:01: [io  0xffff] has been reserved
[    0.164675] system 00:01: [io  0xffff] has been reserved
[    0.164676] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.164677] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.164678] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.164679] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.164680] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.164681] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.164684] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164697] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.164725] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.164728] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.164796] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.164797] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    0.164799] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164825] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.164917] pnp 00:06: [dma 0 disabled]
[    0.164946] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.164976] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.164979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165248] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.165249] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.165250] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.165251] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.165253] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.165254] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.165255] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.165256] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.165257] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.165258] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.165259] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.165260] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.165262] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165405] pnp: PnP ACPI: found 9 devices
[    0.170746] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.170750] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.170752] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.170753] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.170759] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.170766] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.170768] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.170769] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.170771] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.170775] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.170778] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.170782] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.170784] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.170788] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.170791] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.170796] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.170797] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.170798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.170799] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.170799] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.170800] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.170801] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.170802] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.170803] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.170804] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.170805] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.170806] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.170807] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.170807] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.170808] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.170809] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.170880] NET: Registered protocol family 2
[    0.170986] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.171000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.171067] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.171163] TCP: Hash tables configured (established 32768 bind 32768)
[    0.171187] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.171203] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.171240] NET: Registered protocol family 1
[    0.171250] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.171574] PCI: CLS 64 bytes, default 64
[    0.171599] Unpacking initramfs...
[    0.243325] Freeing initrd memory: 804K
[    0.243328] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.243329] software IO TLB: mapped [mem 0xd4db0000-0xd8db0000] (64MB)
[    0.243734] Initialise system trusted keyrings
[    0.243768] workingset: timestamp_bits=56 max_order=20 bucket_order=0
[    0.244964] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.244989] ntfs: driver 2.1.32 [Flags: R/W].
[    0.245031] fuse init (API version 7.29)
[    0.245080] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.245379] aufs 5.1-20190520
[    0.246174] Key type asymmetric registered
[    0.246175] Asymmetric key parser 'x509' registered
[    0.246181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.246562] intel_idle: MWAIT substates: 0x2120
[    0.246563] intel_idle: v0.4.1 model 0x3C
[    0.246629] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.246746] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.246769] ACPI: Power Button [PWRB]
[    0.246808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.246818] ACPI: Power Button [PWRF]
[    0.247094] thermal LNXTHERM:00: registered as thermal_zone0
[    0.247094] ACPI: Thermal Zone [TZ00] (28 C)
[    0.247224] thermal LNXTHERM:01: registered as thermal_zone1
[    0.247225] ACPI: Thermal Zone [TZ01] (30 C)
[    0.247362] Linux agpgart interface v0.103
[    0.248141] loop: module loaded
[    0.248169] usbcore: registered new interface driver rtsx_usb
[    0.248305] ahci 0000:00:1f.2: version 3.0
[    0.248435] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x13 impl SATA mode
[    0.248437] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems 
[    0.256034] scsi host0: ahci
[    0.257444] scsi host1: ahci
[    0.259028] scsi host2: ahci
[    0.260444] scsi host3: ahci
[    0.262027] scsi host4: ahci
[    0.262077] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 26
[    0.262079] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 26
[    0.262080] ata3: DUMMY
[    0.262080] ata4: DUMMY
[    0.262082] ata5: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16300 irq 26
[    0.262384] Fusion MPT base driver 3.04.20
[    0.262385] Copyright (c) 1999-2008 LSI Corporation
[    0.262388] Fusion MPT SPI Host driver 3.04.20
[    0.262395] Fusion MPT SAS Host driver 3.04.20
[    0.262407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.262407] ehci-pci: EHCI PCI platform driver
[    0.262483] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.262487] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.262496] ehci-pci 0000:00:1a.0: debug port 2
[    0.266382] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.266390] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    0.273028] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.273318] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.273319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.273320] usb usb1: Product: EHCI Host Controller
[    0.273321] usb usb1: Manufacturer: Linux 5.1.5-porteus ehci_hcd
[    0.273322] usb usb1: SerialNumber: 0000:00:1a.0
[    0.273513] hub 1-0:1.0: USB hub found
[    0.273535] hub 1-0:1.0: 2 ports detected
[    0.273706] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.273709] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.273718] ehci-pci 0000:00:1d.0: debug port 2
[    0.277613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.277621] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    0.284442] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.284463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.284464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.284465] usb usb2: Product: EHCI Host Controller
[    0.284466] usb usb2: Manufacturer: Linux 5.1.5-porteus ehci_hcd
[    0.284466] usb usb2: SerialNumber: 0000:00:1d.0
[    0.284607] hub 2-0:1.0: USB hub found
[    0.284611] hub 2-0:1.0: 2 ports detected
[    0.284696] ehci-platform: EHCI generic platform driver
[    0.284704] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.284707] ohci-pci: OHCI PCI platform driver
[    0.284714] ohci-platform: OHCI generic platform driver
[    0.284719] uhci_hcd: USB Universal Host Controller Interface driver
[    0.284799] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.284802] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.285851] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.285854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.285967] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.285968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.285969] usb usb3: Product: xHCI Host Controller
[    0.285970] usb usb3: Manufacturer: Linux 5.1.5-porteus xhci-hcd
[    0.285971] usb usb3: SerialNumber: 0000:00:14.0
[    0.286086] hub 3-0:1.0: USB hub found
[    0.286096] hub 3-0:1.0: 10 ports detected
[    0.287036] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.287038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.287040] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.287062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    0.287063] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.287064] usb usb4: Product: xHCI Host Controller
[    0.287064] usb usb4: Manufacturer: Linux 5.1.5-porteus xhci-hcd
[    0.287065] usb usb4: SerialNumber: 0000:00:14.0
[    0.287206] hub 4-0:1.0: USB hub found
[    0.287211] hub 4-0:1.0: 2 ports detected
[    0.287364] ehci-fsl: Freescale EHCI Host controller driver
[    0.287373] usbcore: registered new interface driver uas
[    0.287386] usbcore: registered new interface driver usb-storage
[    0.287391] usbcore: registered new interface driver ums-alauda
[    0.287395] usbcore: registered new interface driver ums-cypress
[    0.287398] usbcore: registered new interface driver ums-datafab
[    0.287402] usbcore: registered new interface driver ums_eneub6250
[    0.287406] usbcore: registered new interface driver ums-freecom
[    0.287414] usbcore: registered new interface driver ums-isd200
[    0.287417] usbcore: registered new interface driver ums-jumpshot
[    0.287421] usbcore: registered new interface driver ums-karma
[    0.287425] usbcore: registered new interface driver ums-onetouch
[    0.287431] usbcore: registered new interface driver ums-realtek
[    0.287435] usbcore: registered new interface driver ums-sddr09
[    0.287438] usbcore: registered new interface driver ums-sddr55
[    0.287442] usbcore: registered new interface driver ums-usbat
[    0.287465] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.287466] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.288109] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.288319] mousedev: PS/2 mouse device common for all mice
[    0.288501] rtc_cmos 00:02: RTC can wake from S4
[    0.288625] rtc_cmos 00:02: registered as rtc0
[    0.288626] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.288685] intel_pstate: Intel P-state driver initializing
[    0.288745] sdhci: Secure Digital Host Controller Interface driver
[    0.288746] sdhci: Copyright(c) Pierre Ossman
[    0.288803] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    0.288804] wbsd: Copyright(c) Pierre Ossman
[    0.288860] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    0.289019] usbcore: registered new interface driver vub300
[    0.289038] usbcore: registered new interface driver ushc
[    0.289067] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.289231] hidraw: raw HID events driver (C) Jiri Kosina
[    0.289273] usbcore: registered new interface driver usbhid
[    0.289274] usbhid: USB HID core driver
[    0.289544] NET: Registered protocol family 17
[    0.290205] microcode: sig=0x306c3, pf=0x2, revision=0x19
[    0.290310] microcode: Microcode Update Driver: v2.2.
[    0.290336] sched_clock: Marking stable (286816277, 3483316)->(400764495, -110464902)
[    0.290619] registered taskstats version 1
[    0.290621] Loading compiled-in X.509 certificates
[    0.291045] Key type encrypted registered
[    0.291545] rtc_cmos 00:02: setting system clock to 2020-08-10T05:32:20 UTC (1597037540)
[    0.291556] ALSA device list:
[    0.291557]   No soundcards found.
[    0.320288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.571029] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.571451] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.571469] ata1.00: ATA-11: SPCC Solid State Disk, SBFD00.3, max UDMA/133
[    0.571474] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.571777] ata1.00: configured for UDMA/133
[    0.572038] scsi 0:0:0:0: Direct-Access     ATA      SPCC Solid State 00.3 PQ: 0 ANSI: 5
[    0.572511] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.572530] sd 0:0:0:0: [sda] Write Protect is off
[    0.572534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.572557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.573259]  sda: sda1 sda2 sda3 sda4
[    0.573424] ata2.00: ATA-8: Hitachi HUS724030ALE641, MJ8OA5F0, max UDMA/133
[    0.573429] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.574072] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.575624] ata2.00: configured for UDMA/133
[    0.575894] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HUS72403 A5F0 PQ: 0 ANSI: 5
[    0.576288] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    0.576294] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    0.576335] sd 1:0:0:0: [sdb] Write Protect is off
[    0.576339] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.576363] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.579028] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.580083] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190215/psargs-330)
[    0.580205] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[    0.580607] ata5.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA180, max UDMA/133
[    0.580612] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.581704] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190215/psargs-330)
[    0.581809] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[    0.582137] ata5.00: configured for UDMA/133
[    0.582356] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 A180 PQ: 0 ANSI: 5
[    0.582912] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.582952] sd 4:0:0:0: [sdc] Write Protect is off
[    0.582957] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.583133] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.589098]  sdc: sdc1
[    0.590268] sd 4:0:0:0: [sdc] Attached SCSI disk
[    0.599431] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.605240]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[    0.606145] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.606648] Freeing unused kernel image memory: 988K
[    0.606990] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.607430] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    0.613017] Write protecting the kernel read-only data: 16384k
[    0.614269] Freeing unused kernel image memory: 2028K
[    0.615097] Freeing unused kernel image memory: 1724K
[    0.615188] rodata_test: all tests were successful
[    0.615192] Run /init as init process
[    0.646484] random: fast init done
[    0.727887] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    0.727892] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.728330] hub 1-1:1.0: USB hub found
[    0.728505] hub 1-1:1.0: 4 ports detected
[    0.734525] usb 3-3: New USB device found, idVendor=08bb, idProduct=2704, bcdDevice= 1.00
[    0.734531] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.734534] usb 3-3: Product: USB Audio DAC   
[    0.734537] usb 3-3: Manufacturer: Burr-Brown from TI              
[    0.735387] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    0.735393] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.735883] hub 2-1:1.0: USB hub found
[    0.735886] input: Burr-Brown from TI               USB Audio DAC    as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:08BB:2704.0001/input/input3
[    0.735983] hub 2-1:1.0: 6 ports detected
[    0.787706] hid-generic 0003:08BB:2704.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI               USB Audio DAC   ] on usb-0000:00:14.0-3/input2
[    0.847026] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    0.860581] usb 4-2: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10
[    0.860587] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.860590] usb 4-2: Product: USB DISK 3.0
[    0.860593] usb 4-2: Manufacturer:         
[    0.860596] usb 4-2: SerialNumber: 07018AED8D02AE56
[    0.862134] usb-storage 4-2:1.0: USB Mass Storage device detected
[    0.862312] scsi host5: usb-storage 4-2:1.0
[    0.973376] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[    1.064600] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[    1.074606] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[    1.075897] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.081293] EXT4-fs (sda4): warning: mounting unchecked fs, running e2fsck is recommended
[    1.083048] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null)
[    1.085621] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    1.101212] usb 3-6: New USB device found, idVendor=062a, idProduct=4102, bcdDevice= 1.10
[    1.101215] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.101217] usb 3-6: Product: 2.4G Wireless Mouse
[    1.101218] usb 3-6: Manufacturer: MOSART Semi.
[    1.103470] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:062A:4102.0002/input/input4
[    1.103762] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:062A:4102.0002/input/input5
[    1.104084] hid-generic 0003:062A:4102.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-6/input0
[    1.252863] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[    1.293512] tsc: Refined TSC clocksource calibration: 2999.996 MHz
[    1.293516] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e4180184, max_idle_ns: 440795270742 ns
[    1.293538] clocksource: Switched to clocksource tsc
[    1.802734] random: ntfs-3g: uninitialized urandom read (6 bytes read)
[    1.819098] random: crng init done
[    1.869627] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    1.870517] scsi 5:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
[    1.871085] sd 5:0:0:0: [sdd] 60567552 512-byte logical blocks: (31.0 GB/28.9 GiB)
[    1.871593] sd 5:0:0:0: [sdd] Write Protect is off
[    1.871598] sd 5:0:0:0: [sdd] Mode Sense: 45 00 00 00
[    1.871866] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.879520]  sdd: sdd1 sdd2
[    1.880720] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[    3.382926] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.385362] EXT4-fs (sdd2): warning: mounting unchecked fs, running e2fsck is recommended
[    3.407491] EXT4-fs (sdd2): mounted filesystem without journal. Opts: (null)
[    4.328453] udevd[604]: starting eudev-3.2.9
[    7.299895] Adding 3145724k swap on /dev/sdb2.  Priority:-2 extents:1 across:3145724k FS
Top
User avatar
Ed_P
Contributor
Contributor
Posts: 8360
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Porteus 5.0 RC2 bug reports

Post#19 by Ed_P » 10 Aug 2020, 05:52

Cinnamon: No Battery Critical message pops up when the battery is about to expire.
Ed
Top
User avatar
Blaze
DEV Team
DEV Team
Posts: 3884
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:
Contact Blaze

Porteus 5.0 RC2 bug reports

Post#20 by Blaze » 10 Aug 2020, 05:56

babam wrote: ↑
10 Aug 2020, 03:25
 Why use old kernel 5.4
LTS (Slackware is use it) and supports Nvidia drivers for old video cards.
Better support for wifi dongles with monitor mode and packet injection.

rchase, this is wifi PCI card?
Can you show output of these commands on RC2:

Code: Select all

su
toor
lspci -v -s 02:00.0
lspci -knn | egrep 'eth|net|wir' -A6
dmesg | egrep -i 'rtl|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
iw list
iw dev
iwconfig
ifconfig
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#21 by rchase » 10 Aug 2020, 05:57

Instead of periodically saying that whatever is respawning too often and will try again in five minutes, couldn't Porteus log me in and issue startx rather than have me do it? This comes up fairly frequently -- it's no great trouble to sign in and type "startx", but it strikes me that not only is this something that should be able to be accomplished programmatically, it's the sort of glitch that makes Porteus problematic for general use. File this under Porteus bugs maintained through all versions.
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#22 by rchase » 10 Aug 2020, 06:03

What's up with Porteus periodically blanking the screen and closing all my applications? It's happened several times recently on more than one computer and in rc1 and rc2; there's no other indication of any fault.
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#23 by rchase » 10 Aug 2020, 06:13

Blaze, no, Ethernet; "Unable to load libkmod resources":

Code: Select all

root@porteus:~# lspci -v -s 02:00.0
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7817
	Flags: bus master, fast devsel, latency 0, IRQ 3
	I/O ports at e000 [size=256]
	Memory at f7c00000 (64-bit, non-prefetchable) [size=4K]
	Memory at f0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
	Capabilities: [d0] Vital Product Data
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
	Capabilities: [170] Latency Tolerance Reporting
lspci: Unable to load libkmod resources: error -12

root@porteus:~# lspci -knn | egrep 'eth|net|wir' -A6
lspci: Unable to load libkmod resources: error -12
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7817]
root@porteus:~# dmesg | egrep -i 'rtl|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
[    0.000000] BIOS-provided physical RAM map:
[    0.007500] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[    0.010220] No NUMA configuration found
[    0.029253] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.147855] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.149139] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.150721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.160774] vgaarb: loaded
[    0.160774] libata version 3.00 loaded.
[    0.165369] pnp: PnP ACPI: found 9 devices
[    0.244999] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.246110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.254433] loop: module loaded
[    0.261289] ehci-pci 0000:00:1a.0: debug port 2
[    0.272420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.272572] hub 1-0:1.0: USB hub found
[    0.272742] ehci-pci 0000:00:1d.0: debug port 2
[    0.283408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.283554] hub 2-0:1.0: USB hub found
[    0.284921] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    0.285035] hub 3-0:1.0: USB hub found
[    0.286009] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    0.286154] hub 4-0:1.0: USB hub found
[    0.290445]   No soundcards found.
[    0.575490] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    0.579413] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190215/psargs-330)
[    0.579509] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[    0.581169] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20190215/psargs-330)
[    0.581261] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[    0.719735] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    0.720166] hub 1-1:1.0: USB hub found
[    0.734399] usb 3-3: New USB device found, idVendor=08bb, idProduct=2704, bcdDevice= 1.00
[    0.737754] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    0.738155] hub 2-1:1.0: USB hub found
[    0.860644] usb 4-2: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10
[    1.102000] usb 3-6: New USB device found, idVendor=062a, idProduct=4102, bcdDevice= 1.10
[    1.147520] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[    1.154475] EXT4-fs (sda4): warning: mounting unchecked fs, running e2fsck is recommended
[    3.285292] EXT4-fs (sdd2): warning: mounting unchecked fs, running e2fsck is recommended
root@porteus:~# iw list
nl80211 not found.
root@porteus:~# iw dev
nl80211 not found.
root@porteus:~# iwconfig
lo        no wireless extensions.

root@porteus:~# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 10  bytes 724 (724.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 724 (724.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@porteus:~#
(using your kernel, crippled-sources.xzm, and vmlinuz under Porteus 5.0rc2 XFCE)
Top
fulalas
DEV Team
DEV Team
Posts: 2050
Joined: 26 Oct 2016, 15:34
Distribution: Porteus
Location: Brazil

Porteus 5.0 RC2 bug reports

Post#24 by fulalas » 10 Aug 2020, 06:56

@rchase, this network issue you're facing usually happens when you mix different 000-kernel module and vmlinuz file. Do you mind doing a test? Get another USB stick and copy just the RC2 ISO content and try it.

@Ed_P, the default has been changed, that's why you don't remember enabling it :)
Top
User avatar
Blaze
DEV Team
DEV Team
Posts: 3884
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:
Contact Blaze

Porteus 5.0 RC2 bug reports

Post#25 by Blaze » 10 Aug 2020, 07:12

fulalas wrote: ↑
10 Aug 2020, 06:56
 Get another USB stick and copy just the RC2 ISO content and try it.

Code: Select all

su
toor
cd /path/where-is-your-Porteus-iso/
mloop Porteus*.iso
cp -a /mnt/loop/* /mnt/your-a-new-usb-drive/
sync && sleep 5
# It takes some time
uloop
cd $BOOTDEV/boot
./Porteus-installer-for-Linux.com
# type ok
reboot
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Top
roadie
Full of knowledge
Full of knowledge
Posts: 400
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 5.0-RC1
Location: In a hayfield

Porteus 5.0 RC2 bug reports

Post#26 by roadie » 10 Aug 2020, 13:58

rchase,

You need to run these tests in AlwaysFresh mode, dmesg shows a changes folder being used. It also shows the kernel as 5.1.5 when it should be 5.4.57. which is probably what is causing the issue. It looks like the wrong vmlinuz is being used and there's a mismatch with the kernel modules.
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#27 by rchase » 10 Aug 2020, 15:31

First, I was going to make a retort, then I decided to repeat the test, as suggested, booting in "Always Fresh" mode. I used:

Code: Select all

APPEND  nomagic base_only norootcopy utc timezone=America/Denver login=root
and Porteus booted with network access, both with the original kernel and the updated one. I was certain that I had started Porteus without /changes in my previous tests, so I repeated the test with:

Code: Select all

APPEND from=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus changes=UUID:"3d99f0ce-54f5-48b9-bc1d-5926d0e45f3e"/testPorteus/porteus utc timezone=America/Denver login=root
. First, I double-checked the /porteus folder and discovered to my surprise that /changes had been written anyway; it was empty, but why does Porteus alter the installation at all in "Always Fresh" mode? When I rebooted with the latter APPEND and a completely empty /changes folder, Porteus booted up showing the xfce-blue wallpaper and using the Adwaita-dark theme and Elementary OS dark icons -- with no network access. I tried booting up with "nomagic baseonly norootcopy" and using the save session dialog to replace /porteus/changes, but when I rebooted with "changes=", the desktop displayed the xfce-blue background again, application icons were missing, and I had no network access. I'd like both network access and persistence, please.

Why does Porteus write out /changes at boot? It's obvious that changes need to be made at shutdown, so why is /changes created at boot instead of then? "changes=" should be overridden by the non-functional radio button in the Log Out dialog or by physically turning of the computer or rebooting it, that way, we could rescue installations without having to delete /changes and start over. If changes are being stored in the live file system, what useful purpose is served in writing to the installation medium twice, at boot and at shutdown? Since changes made by the user during the course of the session have to be written out at shutdown anyway, why not defer the creation or updating of /changes on the installation medium until then?
Top
User avatar
Blaze
DEV Team
DEV Team
Posts: 3884
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus current ☯ all DEs ☯
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:
Contact Blaze

Porteus 5.0 RC2 bug reports

Post#28 by Blaze » 10 Aug 2020, 15:38

Code: Select all

/usr/bin/rpm2xzm: line 100: gtkdialog.py: command not found
Отправлено спустя 1 час 19 минут 28 секунд:
BTW, I added

Printing:
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Top
donald
Full of knowledge
Full of knowledge
Posts: 2067
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Porteus 5.0 RC2 bug reports

Post#29 by donald » 10 Aug 2020, 19:43

@ rchase
The radio button "Save sessions for future logins" should save open windows
so they do re-appear after a reboot.
Those sessions are stored in ~/.cache/sessions/ and have nothing to do with changes
you make to the system.

also the changes=EXIT or changes-ro cheatcode might be of some interest.
Top
rchase
Shogun
Shogun
Posts: 282
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 5.0 rc3 xfce
Location: Denver, Colorado

Porteus 5.0 RC2 bug reports

Post#30 by rchase » 10 Aug 2020, 19:59

donald wrote: ↑
10 Aug 2020, 19:43
 @ rchase
The radio button "Save sessions for future logins" should save open windows
so they do re-appear after a reboot.
Those sessions are stored in ~/.cache/sessions/ and have nothing to do with changes
you make to the system.

also the changes=EXIT or changes-ro cheatcode might be of some interest.
I'd like an answer to my several questions -- with respect to how Porteus makes changes, why is the /changes folder written at boot? It must incorporate changes made by the loading of packages as well as changes I make to my desktop, else why does networking fail the instant I attempt to use persistence, having done nothing else? I've verified that I have network access under Porteus 5.0rc2 with or without using the new kernel; how do I proceed to configure my desktop and make changes persistent? The "change-ro" cheatcode is of zero relevance, so far as I can see; networking breaks because I am trying to save changes -- I'm not repeatedly breaking Porteus doing something else and need to hold off committing changes!
Top
Post Reply

Return to “Bug Reports”