Page 5 of 10
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 06:43
by ncmprhnsbl
as root:
whether this will stick on saving/reboot is a good question
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 07:21
by Blaze
brokenman wrote:It has long been observed that in the text mode Russian alphabet (сyrillic) appears as follows:
Is this only in 32bit?
32 and 64 bit.
Have you tried setting the character encoding in the terminal?
No. Can you give me example of this (these) command(s)?
I think need to take one font from
kbd-1.15-x86_64-3.txz package and to tweak /etc/rc.d/rc.font (set a correct font via right commands)
Code: Select all
root@porteus:~# ls /root/Загрузки/kbd-1.15-x86_64-3/usr/share/kbd/consolefonts
161.cp.gz drdos8x14.psfu.gz lat1-14.psfu.gz
162.cp.gz drdos8x16.psfu.gz lat1-16.psfu.gz
163.cp.gz drdos8x6.psfu.gz lat2-08.psfu.gz
164.cp.gz drdos8x8.psfu.gz lat2-10.psfu.gz
165.cp.gz gr737a-8x8.psfu.gz lat2-12.psfu.gz
737.cp.gz gr737a-9x14.psfu.gz lat2-14.psfu.gz
880.cp.gz gr737a-9x16.psfu.gz lat2-16.psfu.gz
928.cp.gz gr737b-8x11.psfu.gz lat2a-16.psfu.gz
972.cp.gz gr737b-9x16-medieval.psfu.gz lat4-08.psfu.gz
Agafari-12.psfu.gz gr737c-8x14.psfu.gz lat4-10.psfu.gz
Agafari-14.psfu.gz gr737c-8x16.psfu.gz lat4-12.psfu.gz
Agafari-16.psfu.gz gr737c-8x6.psfu.gz lat4-14.psfu.gz
Cyr_a8x14.psfu.gz gr737c-8x7.psfu.gz lat4-16+.psfu.gz
Cyr_a8x16.psfu.gz gr737c-8x8.psfu.gz lat4-16.psfu.gz
Cyr_a8x8.psfu.gz gr737d-8x16.psfu.gz lat4-19.psfu.gz
ERRORS gr928-8x16-thin.psfu.gz lat4a-08.psfu.gz
Goha-12.psfu.gz gr928-9x14.psfu.gz lat4a-10.psfu.gz
Goha-14.psfu.gz gr928-9x16.psfu.gz lat4a-12.psfu.gz
Goha-16.psfu.gz gr928a-8x14.psfu.gz lat4a-14.psfu.gz
GohaClassic-12.psfu.gz gr928a-8x16.psfu.gz lat4a-16+.psfu.gz
GohaClassic-14.psfu.gz gr928b-8x14.psfu.gz lat4a-16.psfu.gz
GohaClassic-16.psfu.gz gr928b-8x16.psfu.gz lat4a-19.psfu.gz
Lat2-Terminus16.psfu.gz greek-polytonic.psfu.gz lat5-12.psfu.gz
LatArCyrHeb-08.psfu.gz iso01-12x22.psfu.gz lat5-14.psfu.gz
LatArCyrHeb-14.psfu.gz iso01.08.gz lat5-16.psfu.gz
LatArCyrHeb-16+.psfu.gz iso01.14.gz lat7-14.psfu.gz
LatArCyrHeb-16.psfu.gz iso01.16.gz lat7a-14.psfu.gz
LatArCyrHeb-19.psfu.gz iso02-12x22.psfu.gz lat7a-16.psf.gz
Mik_8x16.gz iso02.08.gz lat9-08.psf.gz
README.12x22 iso02.14.gz lat9-10.psf.gz
README.Arabic iso02.16.gz lat9-12.psf.gz
README.Cyrillic iso03.08.gz lat9-14.psf.gz
README.Ethiopic iso03.14.gz lat9-16.psf.gz
README.Greek iso03.16.gz lat9u-08.psfu.gz
README.Hebrew iso04.08.gz lat9u-10.psfu.gz
README.Lat2-Terminus16 iso04.14.gz lat9u-12.psfu.gz
README.cp1250 iso04.16.gz lat9u-14.psfu.gz
README.cybercafe iso05.08.gz lat9u-16.psfu.gz
README.drdos iso05.14.gz lat9v-08.psfu.gz
README.lat0 iso05.16.gz lat9v-10.psfu.gz
README.lat7 iso06.08.gz lat9v-12.psfu.gz
README.lat9 iso06.14.gz lat9v-14.psfu.gz
README.psfu iso06.16.gz lat9v-16.psfu.gz
UniCyrExt_8x16.psf.gz iso07.14.gz lat9w-08.psfu.gz
UniCyr_8x14.psf.gz iso07.16.gz lat9w-10.psfu.gz
UniCyr_8x16.psf.gz iso07u-16.psfu.gz lat9w-12.psfu.gz
UniCyr_8x8.psf.gz iso08.08.gz lat9w-14.psfu.gz
alt-8x14.gz iso08.14.gz lat9w-16.psfu.gz
alt-8x16.gz iso08.16.gz m.fnt.gz
alt-8x8.gz iso09.08.gz ml.fnt.gz
altc-8x16.gz iso09.14.gz mod_d.fnt.gz
aply16.psf.gz iso09.16.gz mod_s.fnt.gz
arm8.fnt.gz iso10.08.gz mr.fnt.gz
b.fnt.gz iso10.14.gz mu.fnt.gz
c.fnt.gz iso10.16.gz partialfonts/
cp1250.psfu.gz koi8-14.psf.gz r.fnt.gz
cp850-8x14.psfu.gz koi8c-8x16.gz rl.fnt.gz
cp850-8x16.psfu.gz koi8r-8x14.gz ro.fnt.gz
cp850-8x8.psfu.gz koi8r-8x16.gz ruscii_8x16.psfu.gz
cp857.08.gz koi8r-8x8.gz ruscii_8x8.psfu.gz
cp857.14.gz koi8r.8x8.psfu.gz s.fnt.gz
cp857.16.gz koi8u_8x14.psfu.gz sc.fnt.gz
cp865-8x14.psfu.gz koi8u_8x16.psfu.gz scrawl_s.fnt.gz
cp865-8x16.psfu.gz koi8u_8x8.psfu.gz scrawl_w.fnt.gz
cp865-8x8.psfu.gz lat0-08.psfu.gz sd.fnt.gz
cp866-8x14.psf.gz lat0-10.psfu.gz sun12x22.psfu.gz
cp866-8x16.psf.gz lat0-12.psfu.gz t.fnt.gz
cp866-8x8.psf.gz lat0-14.psfu.gz t850b.fnt.gz
cybercafe.fnt.gz lat0-16.psfu.gz tcvn8x16.psf.gz
cyr-sun16.psfu.gz lat1-08.psfu.gz viscii10-8x16.psfu.gz
default8x16.psfu.gz lat1-10.psfu.gz
default8x9.psfu.gz lat1-12.psfu.gz
root@porteus:~#
BTW I found this script for automount + safely remove devices (little triangle things) for the left sidebar (thunar, pcmanfm and probably others)
/etc/init.d/
show_gvfs
Code: Select all
#!/bin/bash
#modifies /etc/fstab to add 'comment=x-gvfs-show' to all devices.
#This allows the devices to show up in the pcmanfm and thunar left
#panes under udisks2
if [ "$1" = "start" ]; then
for a in `cat /etc/fstab |sed '/Device partitions/,/^$/!d'|grep '/dev/'|cut -d ' ' -f4|sort -u|grep -v 'x-gvfs-show'`; do
sed -i '/Device partitions/,/^$/ '"s/$a/$a,comment=x-gvfs-show/g"'' /etc/fstab;
done
fi
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 13:51
by Bogomips
Cinnamon 32 bit
Slight glitch with screen locker. Have two layouts en and ru. Had switched to ru and then returned to en. However screen locker now insists on being in ru. Enter pw fails, and have to toggle dialog switch to en in order to get pw accepted.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 17:00
by Ed_P
ncmprhnsbl wrote:as root:
whether this will stick on saving/reboot is a good question
Unfortunately no.
Code: Select all
root@porteus:~# ls -l /home
total 0
drwxr-xr-x 32 root root 80 Jun 16 12:18 guest/
root@porteus:~#
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 19:40
by Bogomips
^ cliexec=chown~-R~guest:users~/home/guest
As temporary fix?
P.S. Cinnamon 32 bit
Worked out how to activate module from CLI. Must not be done as root but as guest, in which case root password has to be supplied, following which activation takes place. 8)
Re: Porteus-v3.2rc3 Bug Reports
Posted: 16 Jun 2016, 22:31
by Ed_P
^ Actually I was thinking more along the lines of mloop the save.dat file and changing it's contents but not successful using my normal
3.0.1 system.
Code: Select all
guest@porteus:~$ su
Password:
root@porteus:/home/guest# mloop /mnt/sda5/porteus3.2/changes/porteussave.dat
using /dev/loop28
Please wait while i gather some info ....
mount: wrong fs type, bad option, bad superblock on /dev/loop28,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
#################################
Your data file has been mounted at:
/mnt/loop
You can unmount it by typing uloop
Here is a list of the files:
root@porteus:/home/guest# ls /mnt/loop
root@porteus:/home/guest# uloop
nothing is mounted in /mnt/loop
May retry using 3.2.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 17 Jun 2016, 01:51
by brokenman
No. Can you give me example of this (these) command(s)?
It depends which desktop but look in the terminal menus for changing the encoding. In xfce4 it is 'Terminal/Set Encoding'
The next release will have code in the bootscripts to set guest home folder permissions during boot.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 17 Jun 2016, 02:06
by brokenman
I booted 3.2rc3 with no changes= parm.
I created a new 256MB save.dat file.
I rebooted 3.2rc3 with changes=EXIT; and address of the new save.dat file.
I added and saved the password for my wi-fi router.
I changed the clock display to be 12 hrs.
I rebooted, saving my changes,
On rebooting I get the guest logon screen.
Nothing was added to /home/guest/.
Something was most definitely added to /home/guest. The question is: What was added? The answer really depends on how you went about the procedures above.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 17 Jun 2016, 03:00
by Jack
Mate rc3 x86_64
I just try to set time or make a adjustment and got delete from pannel and gave an error. Can some verify that?
Re: Porteus-v3.2rc3 Bug Reports
Posted: 17 Jun 2016, 05:26
by Ed_P
brokenman wrote:Something was most definitely added to /home/guest. The question is: What was added? The answer really depends on how you went about the procedures above.
1. Created the save.dat using 3.2rc3.
I booted the 3.2rc3 iso using grub4dos.
Code: Select all
set ISO3x=porteus-nemesis-v3.5-lxde-x86_64.iso
set ISO32X=Porteus-CINNAMON-v3.2rc3x-x86_64.iso
set ISO32=Porteus-CINNAMON-v3.2rc3-x86_64.iso
:
:
title Porteus 3.2 Always Fresh +\n264MB\n %ISO32% with networking & Firefox
find --set-root /ISOs/%ISO32%
map --heads=0 --sectors-per-track=0 /ISOs/%ISO32% (0xff)
map --hook
root (0xff)
#kernel /boot/syslinux/vmlinuz from=/ISOs/%ISO32% extramod=/porteus3.2/Modules changes=EXIT:/porteus3.2/changes/porteussave.dat
kernel /boot/syslinux/vmlinuz from=/ISOs/%ISO32% extramod=/porteus3.2/Modules;/porteus3.2/modsavedat
initrd /boot/syslinux/initrd.xz
Code: Select all
guest@porteus:~$ ls /mnt/sda5/porteus3.2/Modules
firefox-47.0b9-x86_64-1.xzm*
flashplayer-plugin-11.2.202.621-x86_64-1alien.xzm*
guest@porteus:~$ ls /mnt/sda5/porteus3.2/modsavedat
porteussave.dat.xzm*
guest@porteus:~$
Menu > Administration > Porteus save file manager > Password > I want to create a new savefile > Size 256MB
2. I rebooted 3.2rc3 iso using grub4dos
Code: Select all
title Porteus 3.2 changes= \n264MB\n%ISO32% with networking & Firefox
find --set-root /ISOs/%ISO32%
map --heads=0 --sectors-per-track=0 /ISOs/%ISO32% (0xff)
map --hook
root (0xff)
kernel /boot/syslinux/vmlinuz from=/ISOs/%ISO32% extramod=/porteus3.2/Modules changes=EXIT:/porteus3.2/changes/porteussave.dat
#kernel /boot/syslinux/vmlinuz from=/ISOs/%ISO32% extramod=/porteus3.2/Modules;/porteus3.2/modsavedat
initrd /boot/syslinux/initrd.xz
3. I clicked on the 3.2rc3 task bar's Network icon.
I clicked on Network Settings
I clciked on my wi-fi network name and entered it's password and connected to it.
4. I clicked on Menu > Preferences > Date & Time > Use 24 hr clock > Off
5. I clicked on Menu > Shutdown the computer > Restart
6. When I rebooted with the updated save.dat file I got a signon screen for guest.
Anything else you need?
-update-
Code: Select all
guest@porteus:~$ mloop /mnt/sda5/porteus3.2/changes/porteussave.dat
Please enter root's password below
Password:
using /dev/loop8
Please wait while i gather some info ....
#################################
Your data file has been mounted at:
/mnt/loop
You can unmount it by typing uloop
Here is a list of the files:
etc home lib root usr var
guest@porteus:~$ ls -l /mnt/loop/home
total 0
drwxr-xr-x 16 guest users 322 Jun 16 12:15 guest/
guest@porteus:~$ ls -l /mnt/loop/home/guest
total 0
drwxr-xr-x 2 guest users 6 Jun 15 23:44 Desktop/
drwxr-xr-x 2 guest users 6 Feb 21 01:25 Documents/
drwxr-xr-x 2 guest users 6 Feb 21 01:35 Downloads/
drwxr-xr-x 2 guest users 6 Feb 21 01:44 Music/
drwxr-xr-x 2 guest users 6 Feb 21 01:36 Pictures/
drwxr-xr-x 2 guest users 6 Feb 21 01:40 Videos/
guest@porteus:~$ ls -l /mnt/loop/home/guest/Desktop
total 0
guest@porteus:~$ ls -l /mnt/loop/etc
total 24
drwxr-xr-x 3 root root 32 Jun 15 23:45 NetworkManager/
-rw-r--r-- 1 root root 42 Jun 15 23:49 dhcpcd.duid
-r-------- 1 root root 192 Jun 15 23:49 dhcpcd.secret
-rw-r--r-- 1 root root 802 Jun 16 12:12 fstab
drwxr-xr-x 3 root root 30 Jun 16 12:13 gconf/
-rw-r--r-- 1 root root 264 Jun 16 12:16 mtab
-rw------- 1 root users 0 Jun 15 23:50 mtab.fuselock
drwxr-xr-x 2 root root 24 Jun 16 12:12 profile.d/
-rw------- 1 root root 512 Jun 16 12:16 random-seed
-rw-r--r-- 1 root root 130 Jun 16 12:12 resolv.conf
drwxr-xr-x 3 root root 21 Jun 16 12:14 samba/
drwxr-xr-x 3 root root 21 Jun 15 23:44 udev/
guest@porteus:~$ ls -l /mnt/loop/lib
total 0
drwxr-xr-x 3 root root 27 Jun 15 23:44 modules/
guest@porteus:~$ ls -l /mnt/loop/root
/bin/ls: cannot open directory '/mnt/loop/root': Permission denied
guest@porteus:~$ ls -l /mnt/loop/usr
total 0
drwxr-xr-x 3 root root 26 Jun 16 12:12 share/
guest@porteus:~$ ls -l /mnt/loop/var
total 0
drwxr-xr-x 4 root root 37 Jun 16 12:14 cache/
drwxr-xr-x 7 root root 79 Jun 16 12:12 lib/
drwxr-xr-x 2 root root 6 Jun 16 12:18 lock/
drwxr-xr-x 3 root root 247 Jun 16 12:13 log/
drwxr-xr-x 3 root root 18 Jun 16 12:12 spool/
guest@porteus:~$
Basically /home is the only folder in save.dat not limited to root access.
And nothing was added to /home/guest/.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 17 Jun 2016, 19:26
by brokenman
Anything else you need?
No. That should be enough. I will retrace your steps, find the culprit and get back to you. Thanks for the report.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 18 Jun 2016, 01:37
by Bogomips
Cinnamon 32 bit
VLC Issue
Using the vlc bundle here
viewtopic.php?f=51&t=5827, vlc gives no trouble to speak of in Maate, XFCE and in KDE rc2 (32/64 bit).
(Not able to get into rc3 KDE as need nvidia driver for this.)
In Cinnamon rc1, rc2 and rc3 quitting vlc after playing videos results in vlc terminating, but the window remains with the picture part greyed out. Cinnamon freezes, and only mouse pointer movement is possible. The consoles can however be reached. Normally had no thought of closing vlc, but running in terminal to verify an error documented by someone else, led to trying to free terminal by terminating vlc.
BTW is there simple command to restart Cinnamon from a console?
(Been searching high and low for it.)
Re: Porteus-v3.2rc3 Bug Reports
Posted: 18 Jun 2016, 03:57
by Ed_P
brokenman wrote:Anything else you need?
No. That should be enough.
I know you said you had enough but maybe this mini log of what I just did may help.
Code: Select all
1. Booted porteus 3.2 rc3 x86_64 Cinnamon ISO
AF mode, no extramods, no changes
Porteus save file manager
Created new 256MB save file.
2. ReBooted porteus 3.2 rc3 x86_64 Cinnamon ISO
AF mode, no extramods
changes=EXIT
Menu > Preferences > Date & Time > 24 hr clock > off
3. ReBooted porteus 3.2 rc3 x86_64 Cinnamon ISO
AF mode, no extramods
changes=EXIT
Logon screen for guest
entered password for guest
Logon screen for guest reappeared
Changed logon to root
System came up but clock is displaying 24 hr format.
Hope this helps your testing.
Re: Porteus-v3.2rc3 Bug Reports
Posted: 18 Jun 2016, 07:10
by Blaze
brokenman wrote:No. Can you give me example of this (these) command(s)?
It depends which desktop but look in the terminal menus for changing the encoding. In xfce4 it is 'Terminal/Set Encoding'
It good for GUI variant, but not for 'Text mode'
PaulBy fixed it via
console-cyrillic package and /etc/rc.d/rc.local
Code: Select all
cyr ru alt_shift_toggle --style=sans --size 16 -e utf-8
Re: Porteus-v3.2rc3 Bug Reports
Posted: 18 Jun 2016, 13:54
by tome
xfce-64 - rpm2xzm doesn't work