[Solved] Creating a Bootable MicroSD using Lenovo ThinkPad
Posted: 12 Sep 2014, 16:24
I have encountered this problem last few days while trying to create a bootable Porteus x86_64 micro SD card using Lenovo ThinkPad x240.
Error debug:-
I have reverted back to using HP laptop to create the micro SD card without any problem because HP detected the SD card as sdx.
Error debug:-
Code: Select all
device: /dev/mmcblk0
partition: /dev/mmcblk0p1
partition number: p1
partition mount point: /mnt/mmcblk0p1
installation path: /mnt/mmcblk0p1/boot
subfolder:
filesystem: ext4
bootloader: lilo
error code: 2
system: a10b23c45d67 3.14.15-porteus x86_64
mount details: /dev/mmcblk0p1 /mnt/mmcblk0p1 ext4 rw,noatime,nodiratime,commit=300,data=ordered 0 0
full partition scheme:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x9e177285
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 976771071 488384512 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 32.0 GB, 32027705344 bytes
27 heads, 27 sectors/track, 85808 cylinders, total 62554112 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xefc58b88
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 62554111 31273024 c W95 FAT32 (LBA)
Disk /dev/mmcblk0: 31.5 GB, 31486640128 bytes
255 heads, 63 sectors/track, 3828 cylinders, total 61497344 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000abb11
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2048 61495295 30746624 83 Linux