installation problem
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
installation problem
hi,
I try to install kiosk on a VM qemu-kvm from Porteus-Kiosk-4.6.0-x86_64.iso
I install on /dev/sda and I configure to enable ssh, vnc, icmp, but when I reboot I don view any open ports
where I wrong?
thank you
I try to install kiosk on a VM qemu-kvm from Porteus-Kiosk-4.6.0-x86_64.iso
I install on /dev/sda and I configure to enable ssh, vnc, icmp, but when I reboot I don view any open ports
where I wrong?
thank you
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
I'm not much familiar with qemu.
Did you configure networking and port redirection properly on the host side? As far as i can see in qemu you need to configure some things manually, contrary to VirtualBox/Vmware where networking is handled automatically.
Maybe you could test kiosk in VirtualBox instead? Set the NIC to bridged mode and you are done.
Thanks
Did you configure networking and port redirection properly on the host side? As far as i can see in qemu you need to configure some things manually, contrary to VirtualBox/Vmware where networking is handled automatically.
Maybe you could test kiosk in VirtualBox instead? Set the NIC to bridged mode and you are done.
Thanks
Please add [Solved] to your thread title if the solution was found.
installation problem
I use same net configuration in qemu in all my images VM , and works OK
is there a way to open a terminal in running kiosk?
is there a way to open a terminal in running kiosk?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
Not sure if qemu supports switching between virtual terminals?
If yes then you could try this:
http://porteus-kiosk.org/faq.html#6
If yes then you could try this:
http://porteus-kiosk.org/faq.html#6
Please add [Solved] to your thread title if the solution was found.
installation problem
ok... but when/how I can edit that file? if I have any method to access system?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
You need to remaster installation ISO:
http://porteus-kiosk.org/kiosk-customization.html
http://porteus-kiosk.org/kiosk-customization.html
Please add [Solved] to your thread title if the solution was found.
installation problem
I tried...
from original iso 82MB new iso is 85.3MB... is this possible to have uncomment only a line?
from original iso 82MB new iso is 85.3MB... is this possible to have uncomment only a line?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
No idea what you did but size is too high.
Here is my qemu starting script (host only networking as i dont have bridge configured):
Once i set the IP in VM to 10.0.0.2 i can SSH from host to VM and from VM to host.
Try it.
Here is my qemu starting script (host only networking as i dont have bridge configured):
Code: Select all
#!/bin/sh
modprobe tun
(
sleep 3
ifconfig vnet0 10.0.0.1
) &
/usr/bin/qemu-system-x86_64 \
-monitor stdio \
-soundhw hda \
-machine accel=kvm \
-m 2048 \
-no-fd-bootchk \
-boot once=d,menu=off \
-drive file="/home/fanthom/Porteus-Kiosk.iso",media=cdrom \
-rtc base=localtime \
-name "Linux 2.6" \
-netdev tap,id=t0,ifname=vnet0,script=no,downscript=no -device e1000,netdev=t0
Try it.
Please add [Solved] to your thread title if the solution was found.
installation problem
- I think network works good... firefox is downloaded correctly
- I repeat customization (to access vtty) , now iso is 81.7MB
but when I press ctrl-alt-f1 I view black screen wihout cursor
- I install from that iso, into a HD.. but when it restart, first time, restarts installation
after the second installation I view:
PORT STATE SERVICE
22/tcp closed ssh
5900/tcp open vnc
is there a way to modify configuration when kiosk is installed?
thank you
- I repeat customization (to access vtty) , now iso is 81.7MB
but when I press ctrl-alt-f1 I view black screen wihout cursor
- I install from that iso, into a HD.. but when it restart, first time, restarts installation
after the second installation I view:
PORT STATE SERVICE
22/tcp closed ssh
5900/tcp open vnc
is there a way to modify configuration when kiosk is installed?
thank you
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
"but when I press ctrl-alt-f1 I view black screen wihout cursor"
You never followed FAQ #5 - isnt it?
http://porteus-kiosk.org/faq.html#5
"is there a way to modify configuration when kiosk is installed?"
http://porteus-kiosk.org/faq.html#3
You never followed FAQ #5 - isnt it?
http://porteus-kiosk.org/faq.html#5
"is there a way to modify configuration when kiosk is installed?"
http://porteus-kiosk.org/faq.html#3
Please add [Solved] to your thread title if the solution was found.
installation problem
ok... some problems are solved, now I enter in tty1
- now I have error starting sshd, it need /var/empty owned by root
- how can I set password in /etc/shadow ? in clear or ... ?
- vncviewer <ipkiosk> ... dont start, error: no matching recurity types
- now I have error starting sshd, it need /var/empty owned by root
- how can I set password in /etc/shadow ? in clear or ... ?
- vncviewer <ipkiosk> ... dont start, error: no matching recurity types
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
installation problem
Maybe its an installation problem?
Please install kiosk in VirtualBox and confirm SSH/VNC works. If yes then do the same setup in qemu.
Please install kiosk in VirtualBox and confirm SSH/VNC works. If yes then do the same setup in qemu.
Please add [Solved] to your thread title if the solution was found.
installation problem
ok, I will try some configurations...
thank you
p.s.
a question about password.. if I would use password "12345" for root
what I have to insert in /etc/shadow ?
p.s.
which is configuration file? and where can I found it in filesystem?
thank you
p.s.
a question about password.. if I would use password "12345" for root
what I have to insert in /etc/shadow ?
p.s.
which is configuration file? and where can I found it in filesystem?