(Solved) Remote Management
Posted: 02 Oct 2017, 21:33
I am trying to setup Porteus client to connect externally to the Porteus server by Wifi
Here is the server config
############### THIS PARAMETER MUST BE HERE FOR REMOTE MANAGEMENT TO WORK ###############
kiosk_config=199.xx.xxx.211:443//sx301-config.txt
############################################################################################
connection=wifi
dhcp=yes
wifi_encryption=wpa2
wpa_password=xxxxx
ssid_name=xpress
browser=chrome
client_id=automatic
homepage_check=If Internet or webpage is not available - please contact your administrator
homepage=http://www.samsxpress.com
hostname=SX301
allow_icmp_protocol=yes
root_password=root
kiosk_server=199.xx.xxx.211:443
volume_level=51%
timezone=America/New_York
vnc_interactive=yes
vnc_password=root
wake_on_lan=yes
additional_components=09-x11vnc.xzm uefi.zip 08-ssh.xzm
When I get to the remote configuration url I put in http://199.xx.xxx.xxx:443/sx301-config.txt I press ok and the client reboots but does not connect to the Porteus server. It gives me an error that it cannot connect or there is no configuration on the Porteus server
I know the server is accepting connections because i can setup the client manually using wifi point to the external ip address on port 443 and the server see's it and let's it connect. But that way I cant make changes to the server config files and all the sites will be remote. please let me know what i am doing wrong here thanks
Here is the server config
############### THIS PARAMETER MUST BE HERE FOR REMOTE MANAGEMENT TO WORK ###############
kiosk_config=199.xx.xxx.211:443//sx301-config.txt
############################################################################################
connection=wifi
dhcp=yes
wifi_encryption=wpa2
wpa_password=xxxxx
ssid_name=xpress
browser=chrome
client_id=automatic
homepage_check=If Internet or webpage is not available - please contact your administrator
homepage=http://www.samsxpress.com
hostname=SX301
allow_icmp_protocol=yes
root_password=root
kiosk_server=199.xx.xxx.211:443
volume_level=51%
timezone=America/New_York
vnc_interactive=yes
vnc_password=root
wake_on_lan=yes
additional_components=09-x11vnc.xzm uefi.zip 08-ssh.xzm
When I get to the remote configuration url I put in http://199.xx.xxx.xxx:443/sx301-config.txt I press ok and the client reboots but does not connect to the Porteus server. It gives me an error that it cannot connect or there is no configuration on the Porteus server
I know the server is accepting connections because i can setup the client manually using wifi point to the external ip address on port 443 and the server see's it and let's it connect. But that way I cant make changes to the server config files and all the sites will be remote. please let me know what i am doing wrong here thanks