Hi everybody,
I am facing a strange problem with PXE boot.
My actually confuguration work with all computer i try but not with my Intel NUC DN2820FYK, which i buy specially for it
It just show "Starting Porteus Kiosk Edition <http://www.porteus.org>" with unlimited blinking underscore
I tried with verbose initrd.xz, and i see it stuck at : udhcpc (v1.21.1) started
I check dsmasq log file here var/log/daemon.log and last line before stop is :
May 22 14:49:55 porteus-pxe dnsmasq-tftp[22908]: envoyé /home/escadmin/library-pxe/isorw/boot/pxelinux.cfg/initrdpxe.xz à 10.98.30.180
Maybe it's missing firmware for Intel UNDI , PXE-2.1 (build 803) --- Realtek PCIe GBE Family Controller Series v2.59 (01/13/14) in intrdpxe.xz ? I have absolutly no idea how to find and add missing one inside (even if i found this script SECTION III UPDATING INITIAL RAMDISK FOR PXE BOOT
The strange thing is, in more than 50 boot try, it already load module and boot great a couple of time
Any ideas ? Thanks in advance.
Erwann
PXE ramdomly boot fails with Intel NUC
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: PXE ramdomly boot fails with Intel NUC
just pushed kiosk 3.1 so please give it a go and report if issue persisted.
thanks
thanks
Please add [Solved] to your thread title if the solution was found.
Re: PXE ramdomly boot fails with Intel NUC
Sorry for this noob question but i'am totally lost with 3.1
I'am just trying to get generated iso but i couldn't .
If if put another usb stick (fat32 or ntfs) or usb cd burner , target device windows found me nothing ... only blank .
If i choose skip i see Porteus Kiosk 3.1 ISO was created as /mnt/kiosk.iso but how easily get this .iso file ?
Sftp ? (login ? Password ? )
Maybe you can send me your uptodate initrdpxe.xz so i can make some test ?
Thanx
I'am just trying to get generated iso but i couldn't .
If if put another usb stick (fat32 or ntfs) or usb cd burner , target device windows found me nothing ... only blank .
If i choose skip i see Porteus Kiosk 3.1 ISO was created as /mnt/kiosk.iso but how easily get this .iso file ?
Sftp ? (login ? Password ? )
Maybe you can send me your uptodate initrdpxe.xz so i can make some test ?
Thanx
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: PXE ramdomly boot fails with Intel NUC
"If if put another usb stick (fat32 or ntfs) or usb cd burner , target device windows found me nothing ... only blank ."
i think i will have to add a 'refresh' button which will scan available devices once again. for now please boot kiosk with your usb stick plugged in and that should work.
btw: burning on a CD wont be supported as it's too risky process.
"If i choose skip i see Porteus Kiosk 3.1 ISO was created as /mnt/kiosk.iso but how easily get this .iso file ?"
you could login to your email account (like gmail) and upload it through it. tested and works ok.
will add this info to the wizard.
"Maybe you can send me your uptodate initrdpxe.xz so i can make some test ?"
please grab it manually from here:
http://porteus-kiosk.org/public/
mind that it must be used with Kiosk 3.1
thanks for your valuable feedback.
i think i will have to add a 'refresh' button which will scan available devices once again. for now please boot kiosk with your usb stick plugged in and that should work.
btw: burning on a CD wont be supported as it's too risky process.
"If i choose skip i see Porteus Kiosk 3.1 ISO was created as /mnt/kiosk.iso but how easily get this .iso file ?"
you could login to your email account (like gmail) and upload it through it. tested and works ok.
will add this info to the wizard.
"Maybe you can send me your uptodate initrdpxe.xz so i can make some test ?"
please grab it manually from here:
http://porteus-kiosk.org/public/
mind that it must be used with Kiosk 3.1
thanks for your valuable feedback.
Please add [Solved] to your thread title if the solution was found.