blank/black screen problems [solved]
Posted: 14 Jun 2022, 13:29
Hello,
Got it solved but maybe someone here is facing similar situation.
I installed Porteus Kiosk on a touch PC and had problems with the screen.
After the bios messages I had a black screen, both during installation and after installation. I was able to hook an external monitor to the device. This then displays the image.
I solved the problem by changing the screen config.
The system gave me a config line for 2 monitors, because I could not install the system differently:
I changed it as follows (boot without 2nd monitor)
Here's my debug log if any interest: https://pastebin.com/MFnygyE3
Got it solved but maybe someone here is facing similar situation.
I installed Porteus Kiosk on a touch PC and had problems with the screen.
After the bios messages I had a black screen, both during installation and after installation. I was able to hook an external monitor to the device. This then displays the image.
I solved the problem by changing the screen config.
The system gave me a config line for 2 monitors, because I could not install the system differently:
Code: Select all
screen_settings=eDP1:1920x1080:59.93:100:normal:normal HDMI2:1920x1080i:50.00:normal:normal:normalCode: Select all
screen_settings=DSI1:1920x1080:60.02:100:normal:normal